[PATCH 1/3] dw_mmc: Don't loop when handling an interrupt

From: Markos Chandras
Date: Tue Mar 12 2013 - 06:55:13 EST


There is no reason to loop when handling an interrupt. The "if" clauses
will handle all of them sequentially. This also eliminates the extra loop
we used to take with no pending interrupts and we ended up breaking out
of the while loop.

Signed-off-by: Markos Chandras <markos.chandras@xxxxxxxxxx>
Cc: Seungwon Jeon <tgih.jun@xxxxxxxxxxx>
Cc: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
Cc: Chris Ball <cjb@xxxxxxxxxx>
---
The patch is based on Chris Ball's mmc-next branch

drivers/mmc/host/dw_mmc.c | 11 ++++-------
1 files changed, 4 insertions(+), 7 deletions(-)

diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index 60063cc..78c7251 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -1563,11 +1563,11 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id)
{
struct dw_mci *host = dev_id;
u32 pending;
- unsigned int pass_count = 0;
int i;

- do {
- pending = mci_readl(host, MINTSTS); /* read-only mask reg */
+ pending = mci_readl(host, MINTSTS); /* read-only mask reg */
+
+ if (pending) {

/*
* DTO fix - version 2.10a and below, and only if internal DMA
@@ -1579,9 +1579,6 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id)
pending |= SDMMC_INT_DATA_OVER;
}

- if (!pending)
- break;
-
if (pending & DW_MCI_CMD_ERROR_FLAGS) {
mci_writel(host, RINTSTS, DW_MCI_CMD_ERROR_FLAGS);
host->cmd_status = pending;
@@ -1642,7 +1639,7 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id)
}
}

- } while (pass_count++ < 5);
+ }

#ifdef CONFIG_MMC_DW_IDMAC
/* Handle DMA interrupts */
--
1.7.1


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/