Re: [PATCH][v3] xhci: correctly enable interrupts

[Thomas Renninger]

On Monday, March 04, 2013 05:14:43 PM Thomas Renninger wrote:
> From: Hannes Reinecke <hare@xxxxxxx>
> 
> xhci has its own interrupt enabling routine, which will try to
> use MSI-X/MSI if present. So the usb core shouldn't try to enable
> legacy interrupts; on some machines the xhci legacy IRQ setting
> is invalid.
> 
> v3: Be careful to not break XHCI_BROKEN_MSI workaround (by trenn)
> 
> Cc: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
> Cc: Oliver Neukum <oneukum@xxxxxxx>
> Cc: Thomas Renninger <trenn@xxxxxxx>
> Cc: Yinghai Lu <yinghai@xxxxxxxxxx>
> Cc: Frederik Himpe <fhimpe@xxxxxxxxx>
> Cc: David Haerdeman <david@xxxxxxxxxxx>
> Cc: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
> 
> Reviewed-by: Thomas Renninger <trenn@xxxxxxx>
> Signed-off-by: Hannes Reinecke <hare@xxxxxxx>

Argh, I should have added:
CC: stable@xxxxxxxxxx


This seem to be a common issue on new machines.
And having xhci not functional at all there is nasty.

The patch is not complex and should fulfill all stable@ criteria.

Is this the official USB mainline subtree?:
https://git.kernel.org/cgit/linux/kernel/git/balbi/usb.git

Adding Felipe, would be great if this one can get queued for 3.9
inclusion. Would be nice if:
CC: stable@xxxxxxxxxx
can be added manually, I can also explicitly submit it to stable@
as soon as it hits Linus' tree.

Thanks,

            Thomas

> 
> diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
> index 622b4a4..2b487d4 100644
> --- a/drivers/usb/core/hcd-pci.c
> +++ b/drivers/usb/core/hcd-pci.c
> @@ -173,6 +173,7 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct
> pci_device_id *id) struct hc_driver	*driver;
>  	struct usb_hcd		*hcd;
>  	int			retval;
> +	int			hcd_irq = 0;
> 
>  	if (usb_disabled())
>  		return -ENODEV;
> @@ -187,15 +188,19 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const
> struct pci_device_id *id) return -ENODEV;
>  	dev->current_state = PCI_D0;
> 
> -	/* The xHCI driver supports MSI and MSI-X,
> -	 * so don't fail if the BIOS doesn't provide a legacy IRQ.
> +	/*
> +	 * The xHCI driver has its own irq management
> +	 * make sure irq setup is not touched for xhci in generic hcd code
>  	 */
> -	if (!dev->irq && (driver->flags & HCD_MASK) != HCD_USB3) {
> -		dev_err(&dev->dev,
> -			"Found HC with no IRQ.  Check BIOS/PCI %s setup!\n",
> -			pci_name(dev));
> -		retval = -ENODEV;
> -		goto disable_pci;
> +	if ((driver->flags & HCD_MASK) != HCD_USB3) {
> +		if (!dev->irq) {
> +			dev_err(&dev->dev,
> +			"Found HC with no IRQ. Check BIOS/PCI %s setup!\n",
> +				pci_name(dev));
> +			retval = -ENODEV;
> +			goto disable_pci;
> +		}
> +		hcd_irq = dev->irq;
>  	}
> 
>  	hcd = usb_create_hcd(driver, &dev->dev, pci_name(dev));
> @@ -245,7 +250,7 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct
> pci_device_id *id)
> 
>  	pci_set_master(dev);
> 
> -	retval = usb_add_hcd(hcd, dev->irq, IRQF_SHARED);
> +	retval = usb_add_hcd(hcd, hcd_irq, IRQF_SHARED);
>  	if (retval != 0)
>  		goto unmap_registers;
>  	set_hs_companion(dev, hcd);
> diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
> index f1f01a8..849470b 100644
> --- a/drivers/usb/host/xhci.c
> +++ b/drivers/usb/host/xhci.c
> @@ -350,7 +350,7 @@ static int xhci_try_enable_msi(struct usb_hcd *hcd)
>  	 * generate interrupts.  Don't even try to enable MSI.
>  	 */
>  	if (xhci->quirks & XHCI_BROKEN_MSI)
> -		return 0;
> +		goto legacy_irq;
> 
>  	/* unregister the legacy interrupt */
>  	if (hcd->irq)
> @@ -371,6 +371,7 @@ static int xhci_try_enable_msi(struct usb_hcd *hcd)
>  		return -EINVAL;
>  	}
> 
> + legacy_irq:
>  	/* fall back to legacy interrupt*/
>  	ret = request_irq(pdev->irq, &usb_hcd_irq, IRQF_SHARED,
>  			hcd->irq_descr, hcd);
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/