Re: [PATCH][v2] xhci: correctly enable interrupts
From: David Härdeman
Date: Mon Mar 04 2013 - 06:25:44 EST
On Mon, Mar 04, 2013 at 09:22:04AM +0100, Hannes Reinecke wrote:
>xhci has its own interrupt enabling routine, which will try to
>use MSI-X/MSI if present. So the usb core shouldn't try to enable
>legacy interrupts; on some machines the xhci legacy IRQ setting
>is invalid.
>
>Cc: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
>Cc: Oliver Neukum <oneukum@xxxxxxx>
>Cc: Thomas Renninger <trenn@xxxxxxx>
>Cc: Yinghai Lu <yinghai@xxxxxxxxxx>
>Cc: Frederik Himpe <fhimpe@xxxxxxxxx>
>Cc: David Haerdeman <david@xxxxxxxxxxx>
>Cc: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
>Signed-off-by: Hannes Reinecke <hare@xxxxxxx>
No idea if it's the "right" solution but it works for me.
Tested-by: David Härdeman <david@xxxxxxxxxxx>
>
>diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
>index 622b4a4..2647e75 100644
>--- a/drivers/usb/core/hcd-pci.c
>+++ b/drivers/usb/core/hcd-pci.c
>@@ -173,6 +173,7 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
> struct hc_driver *driver;
> struct usb_hcd *hcd;
> int retval;
>+ int hcd_irq = 0;
>
> if (usb_disabled())
> return -ENODEV;
>@@ -187,15 +188,21 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
> return -ENODEV;
> dev->current_state = PCI_D0;
>
>- /* The xHCI driver supports MSI and MSI-X,
>- * so don't fail if the BIOS doesn't provide a legacy IRQ.
>+ /*
>+ * The xHCI driver supports MSI and MSI-X,
>+ * so don't fail if the BIOS doesn't provide a legacy IRQ
>+ * and do not try to enable legacy IRQs.
> */
>- if (!dev->irq && (driver->flags & HCD_MASK) != HCD_USB3) {
>- dev_err(&dev->dev,
>- "Found HC with no IRQ. Check BIOS/PCI %s setup!\n",
>- pci_name(dev));
>- retval = -ENODEV;
>- goto disable_pci;
>+ if ((driver->flags & HCD_MASK) != HCD_USB3) {
>+ if (!dev->irq) {
>+ dev_err(&dev->dev,
>+ "Found HC with no IRQ. "
>+ "Check BIOS/PCI %s setup!\n",
>+ pci_name(dev));
>+ retval = -ENODEV;
>+ goto disable_pci;
>+ }
>+ hcd_irq = dev->irq;
> }
>
> hcd = usb_create_hcd(driver, &dev->dev, pci_name(dev));
>@@ -245,7 +252,7 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
>
> pci_set_master(dev);
>
>- retval = usb_add_hcd(hcd, dev->irq, IRQF_SHARED);
>+ retval = usb_add_hcd(hcd, hcd_irq, IRQF_SHARED);
> if (retval != 0)
> goto unmap_registers;
> set_hs_companion(dev, hcd);
>
--
David Härdeman
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/