Re: Boot failure on Origen board using latest kernel

[Sachin Kamat]

Hi Padma,

Here is the short boot log with earlyprintk enabled. This is in the non-dt case.

EXYNOS4210 PMU Initialize
EXYNOS: Initializing architecture
s3c24xx-pwm s3c24xx-pwm.0: tin at 50000000, tdiv at 50000000, tin=divclk, base 0
bio: create slab <bio-0> at 0
SCSI subsystem initialized
Switching to clocksource mct-frc
ROMFS MTD (C) 2007 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 dma-pl330.0: Loaded driver for PL330 DMAC-267056
dma-pl330 dma-pl330.0:  DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
of_dma_controller_register: not enough information provided
dma-pl330 dma-pl330.0: unable to register DMA to the generic DT DMA helpers
dma-pl330: probe of dma-pl330.0 failed with error -22



On 2 March 2013 09:40, Sachin Kamat <sachin.kamat@xxxxxxxxxx> wrote:
> Hi Padma,
>
> While trying to boot the latest mainline kernel (Linus tree tip at
> commit b0af9cd9) on Exynos4210 based Origen board, it stops at
> "Uncompressing Linux... done, booting the kernel."
>
> Git bisect pointed to the commit 421da89aa ("DMA: PL330: Register the
> DMA controller with the generic DMA helpers").
> Reverting this commit helped me boot the board again.
> Could you please look into this?
>
> --
> With warm regards,
> Sachin



-- 
With warm regards,
Sachin
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/