Re: Reproduceable SATA lockup on 3.7.8 with SSD

[Marc MERLIN]

On Tue, Feb 26, 2013 at 08:50:04AM -0800, Marc MERLIN wrote:
> On Tue, Feb 26, 2013 at 10:29:59AM -0500, Jeff Garzik wrote:
> > On 02/25/2013 07:27 PM, Marc MERLIN wrote:
> > >Howdy,
> > >
> > >I seem to have the same problem (or similar) as Mathieu Desnoyers in
> > >https://lkml.org/lkml/2013/2/22/437
> > >
> > >I can reliably get my SSD to drop from the SATA bus given the right 
> > >workload
> > >on linux.
> > >
> > >How can I tell if it's linux's fault of the drive's fault?
> > 
> > Manually force speed to 3.0 Gbps, then 1.5 Gbps, and see what happens.
> > 
> > Try module/kernel parameter libata.force=1.5Gbps or libata.force=3.0Gbps
> 
> Ok, so by reading my log at time of failure, you saw that speed was
> flipping between the two? (I couldn't see that, but I'm not good at reading
> it).
> 
> Also, just to make sure, you're not saying that you want me to change the
> speed at runtime, but 
> 1) boot once with speed forced at 3Gbps and try and reproduce
> 2) boot a 2nd time with speed forced at 1.5Gbps and try and reproduce
> 
> If libata is not a module in my kernel, I can still put 
> libata.force=1.5Gbps 
> on the lilo/grub command line, correct?

Jeff, could you clear up what you'd like me to try out?

Thanks,
Marc
-- 
"A mouse is a device used to point at the xterm you want to type in" - A.S.R.
Microsoft is to operating systems ....
                                      .... what McDonalds is to gourmet cooking
Home page: http://marc.merlins.org/  
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/