Re: [PATCH 7/7] ACPI / scan: Make memory hotplug driver use structacpi_scan_handler

From: Vasilis Liaskovitis
Date: Wed Feb 20 2013 - 05:43:03 EST


Hi Yasuaki,

On Wed, Feb 20, 2013 at 12:35:48PM +0900, Yasuaki Ishimatsu wrote:
> Hi Vasilis,
>
> 2013/02/20 3:11, Vasilis Liaskovitis wrote:
> >Hi,
> >
> >On Sun, Feb 17, 2013 at 04:27:18PM +0100, Rafael J. Wysocki wrote:
> >>From: Rafael J. Wysocki <rafael.j.wysocki@xxxxxxxxx>
> >>
> >>Make the ACPI memory hotplug driver use struct acpi_scan_handler
> >>for representing the object used to set up ACPI memory hotplug
> >>functionality and to remove hotplug memory ranges and data
> >>structures used by the driver before unregistering ACPI device
> >>nodes representing memory. Register the new struct acpi_scan_handler
> >>object with the help of acpi_scan_add_handler_with_hotplug() to allow
> >>user space to manipulate the attributes of the memory hotplug
> >>profile.
> >
> >Let's consider an example where we want acpi memory device ejection to be safely
> >handled by userspace. We do the following:
> >
> >echo 0 > /sys/firmware/acpi/hotplug/memory/autoeject
> >echo 1 > /sys/firmware/acpi/hotplug/memory/uevents
> >
> >We succesfully hotplug acpi device:
> >/sys/devices/LNXSYSTM:00/LNXSYSBUS:00/PNP0C80:00
> >and its corresponding memblocks /sys/devices/system/memory/memoryXX are
> >also successfully onlined.
> >
> >On an eject request, since uevents == 1, the kernel will emit KOBJ_OFFLINE for:
> >/sys/devices/LNXSYSTM:00/LNXSYSBUS:00/PNP0C80:00
> >
> >Can userspace know which memblocks in /sys/devices/system/memory/memoryXX/
> >correspond to the acpi device /sys/devices/LNXSYSTM:00/LNXSYSBUS:00/PNP0C80:00 ?
> >This will be needed so that userspace tries to offline the memblocks (and only
> >if successful, issue the eject operation on the acpi device). As far as I see,
> >we don't create any sysfs links or files for this scenario - can userspace get
> >this info somehow?
>
> >
> >/sys/devices/system/memory/memoryXX/phys_device needs to be properly implemented
> >for this to work I think, see Documentation/ABI/testing/sysfs-memory
> >
> >The following test patch works toward that direction. Let me know if it's of
> >interest or if there are better ideas /comments.
>
> How about use ../PNP0C80:00/physical_node/resources file?
> In my system, the file shows following information.
>
> $ cat /sys/bus/acpi/devices/PNP0C80\:00/physical_node/resources
> state = active
> mem 0x0-0x80000000
> mem 0x100000000-0x800000000
>
> It means PNP0C80:00's memory ranges are "0x0-0x7fffffff" and
> "0x100000000-0x7ffffffff". In x86 architecture, memory section size is
> 128MiB. So, if these memory range is divided by 128MiB, you can
> calculate memory section number as follow:
>
> 0x0-0x7fffffff => 0x0-0x10
> 0x100000000-0x7ffffffff => 0x20-0xff
>
> But there is one problem. The problem is that resources file of added memory
> is not created. If the problem is fixed, I think you can use the way.

thanks for your suggestion. Is this resources file a property of the
physical_node or of each acpi devices?

If it's a node specific file could there be a chance that adjacent memory
ranges get merged? We 'd like these to not get merged.

I will look more into this property. I don't see it currently in my system
(probably because initial memory is not backed by acpi devices in my
seabios/virtual machine).

>
[...]
> >+int acpi_memory_phys_device(unsigned long start_pfn)
> >+{
> >+ struct acpi_memory_device *mem_dev;
> >+ struct acpi_memory_info *info;
> >+ unsigned long start_addr = start_pfn << PAGE_SHIFT;
> >+ int id = 0;
> >+
> >+ list_for_each_entry(mem_dev, &acpi_mem_device_list, mem_device_list) {
> >+ list_for_each_entry(info, &mem_dev->res_list, list) {
> >+ if ((info->start_addr <= start_addr) &&
> >+ (info->start_addr + info->length > start_addr))
> >+ return id;
> >+ }
> >+ id++;
> >+ }
>
> I don't think this solve your problem.
>
> When hot adding memory device in my system, consecutive index number is
> applied to PNP0C80 as follows:
>
> $ ls /sys/bus/acpi/devices/ |grep PNP0C80
> PNP0C80:00
> PNP0C80:01 => hot added memory device
> PNP0C80:02 => hot added memory device
>
> In this case, we can know PNP0C80:YY by memoryXX/phys_device file.
> But if hot removing and adding the same device, index number is changed
> as follows:
>
> $ ls /sys/bus/acpi/devices/
> PNP0C80:00
> PNP0C80:03 => hot added memory device
> PNP0C80:04 => hot added memory device
>
> In this case, we cannot know PNP0C80:YY by memoryXX/phys_device file.
>

thanks, yes you are right. I forgot each new hotplug event will create a new
PNP0C80:XX device where XX always increases. So the hot-add/hot-remove/hot-add
scenario would have a problem.
Then it would be enough to be able to return this monotonically increasing
counter from phys_device instead of the current list iterator. Is this counter
available somehwere in drivers/acpi/scan.c or bus.c? I 'll take a look.

thanks,

- Vasilis
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/