Re: [PATCH 05/11] mfd: twl6040: use devm_gpio_request_one() anddevm_request_threaded_irq()

From: Jingoo Han
Date: Wed Feb 20 2013 - 03:09:10 EST


On Wednesday, February 20, 2013 4:37 PM, Dmitry Torokhov wrote:
>
> Hi Jingoo,
>
> On Wed, Feb 20, 2013 at 03:11:38PM +0900, Jingoo Han wrote:
> > Use devm_gpio_request_one() and devm_request_threaded_irq() to make
> > cleanup paths and more simple.
> >
> > Signed-off-by: Jingoo Han <jg1.han@xxxxxxxxxxx>
> > ---
> > drivers/mfd/twl6040.c | 26 +++++++-------------------
> > 1 files changed, 7 insertions(+), 19 deletions(-)
> >
> > diff --git a/drivers/mfd/twl6040.c b/drivers/mfd/twl6040.c
> > index f361bf3..2d38512 100644
> > --- a/drivers/mfd/twl6040.c
> > +++ b/drivers/mfd/twl6040.c
> > @@ -586,8 +586,8 @@ static int twl6040_probe(struct i2c_client *client,
> > twl6040->audpwron = -EINVAL;
> >
> > if (gpio_is_valid(twl6040->audpwron)) {
> > - ret = gpio_request_one(twl6040->audpwron, GPIOF_OUT_INIT_LOW,
> > - "audpwron");
> > + ret = devm_gpio_request_one(twl6040->dev, twl6040->audpwron,
> > + GPIOF_OUT_INIT_LOW, "audpwron");
> > if (ret)
> > goto gpio_err;
> > }
> > @@ -596,14 +596,14 @@ static int twl6040_probe(struct i2c_client *client,
> > IRQF_ONESHOT, 0, &twl6040_irq_chip,
> > &twl6040->irq_data);
> > if (ret < 0)
> > - goto irq_init_err;
> > + goto gpio_err;
> >
> > twl6040->irq_ready = regmap_irq_get_virq(twl6040->irq_data,
> > TWL6040_IRQ_READY);
> > twl6040->irq_th = regmap_irq_get_virq(twl6040->irq_data,
> > TWL6040_IRQ_TH);
> >
> > - ret = request_threaded_irq(twl6040->irq_ready, NULL,
> > + ret = devm_request_threaded_irq(twl6040->dev, twl6040->irq_ready, NULL,
> > twl6040_readyint_handler, IRQF_ONESHOT,
> > "twl6040_irq_ready", twl6040);
> > if (ret) {
> > @@ -611,12 +611,12 @@ static int twl6040_probe(struct i2c_client *client,
> > goto readyirq_err;
> > }
> >
> > - ret = request_threaded_irq(twl6040->irq_th, NULL,
> > + ret = devm_request_threaded_irq(twl6040->dev, twl6040->irq_th, NULL,
> > twl6040_thint_handler, IRQF_ONESHOT,
> > "twl6040_irq_th", twl6040);
> > if (ret) {
> > dev_err(twl6040->dev, "Thermal IRQ request failed: %d\n", ret);
> > - goto thirq_err;
> > + goto readyirq_err;
> > }
> >
> > /* dual-access registers controlled by I2C only */
> > @@ -676,19 +676,12 @@ static int twl6040_probe(struct i2c_client *client,
> > ret = mfd_add_devices(&client->dev, -1, twl6040->cells, children,
> > NULL, 0, NULL);
> > if (ret)
> > - goto mfd_err;
> > + goto readyirq_err;
> >
> > return 0;
> >
> > -mfd_err:
> > - free_irq(twl6040->irq_th, twl6040);
> > -thirq_err:
> > - free_irq(twl6040->irq_ready, twl6040);
> > readyirq_err:
> > regmap_del_irq_chip(twl6040->irq, twl6040->irq_data);
> > -irq_init_err:
> > - if (gpio_is_valid(twl6040->audpwron))
> > - gpio_free(twl6040->audpwron);
> > gpio_err:
> > regulator_bulk_disable(TWL6040_NUM_SUPPLIES, twl6040->supplies);
> > power_err:
> > @@ -706,11 +699,6 @@ static int twl6040_remove(struct i2c_client *client)
> > if (twl6040->power_count)
> > twl6040_power(twl6040, 0);
> >
> > - if (gpio_is_valid(twl6040->audpwron))
> > - gpio_free(twl6040->audpwron);
> > -
> > - free_irq(twl6040->irq_ready, twl6040);
> > - free_irq(twl6040->irq_th, twl6040);
> > regmap_del_irq_chip(twl6040->irq, twl6040->irq_data);
> >
> > mfd_remove_devices(&client->dev);
>
> Are you sure it is OK to have sub-devices removed and regmap destroyed
> with IRQs still active?

Yes, you're right.
I will use devm_free_irq().

>
> Thanks.
>
> --
> Dmitry

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/