Re: [PATCH v3 1/4] acpi: move x86/mm/srat.c to x86/kernel/acpi/srat.c

[Yasuaki Ishimatsu]

2013/02/05 16:35, liguang wrote:
> srat table should present only on acpi domain,
> seems mm/ is not the right place for it.
> 
> Signed-off-by: liguang <lig.fnst@xxxxxxxxxxxxxx>
> ---

Reviewed-by: Yasuaki Ishimatsu <isimatu.yasuaki@xxxxxxxxxxxxxx>

Thanks,
Yasuaki Ishimatsu

>   arch/x86/kernel/acpi/Makefile |    1 +
>   arch/x86/kernel/acpi/srat.c   |  198 +++++++++++++++++++++++++++++++++++++++++
>   arch/x86/mm/Makefile          |    1 -
>   arch/x86/mm/srat.c            |  198 -----------------------------------------
>   4 files changed, 199 insertions(+), 199 deletions(-)
>   create mode 100644 arch/x86/kernel/acpi/srat.c
>   delete mode 100644 arch/x86/mm/srat.c
> 
> diff --git a/arch/x86/kernel/acpi/Makefile b/arch/x86/kernel/acpi/Makefile
> index 163b225..98cea92 100644
> --- a/arch/x86/kernel/acpi/Makefile
> +++ b/arch/x86/kernel/acpi/Makefile
> @@ -1,5 +1,6 @@
>   obj-$(CONFIG_ACPI)		+= boot.o
>   obj-$(CONFIG_ACPI_SLEEP)	+= sleep.o wakeup_$(BITS).o
> +obj-$(CONFIG_ACPI_NUMA)	+= srat.o
>   
>   ifneq ($(CONFIG_ACPI_PROCESSOR),)
>   obj-y				+= cstate.o
> diff --git a/arch/x86/kernel/acpi/srat.c b/arch/x86/kernel/acpi/srat.c
> new file mode 100644
> index 0000000..cdd0da9
> --- /dev/null
> +++ b/arch/x86/kernel/acpi/srat.c
> @@ -0,0 +1,198 @@
> +/*
> + * ACPI 3.0 based NUMA setup
> + * Copyright 2004 Andi Kleen, SuSE Labs.
> + *
> + * Reads the ACPI SRAT table to figure out what memory belongs to which CPUs.
> + *
> + * Called from acpi_numa_init while reading the SRAT and SLIT tables.
> + * Assumes all memory regions belonging to a single proximity domain
> + * are in one chunk. Holes between them will be included in the node.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/acpi.h>
> +#include <linux/mmzone.h>
> +#include <linux/bitmap.h>
> +#include <linux/module.h>
> +#include <linux/topology.h>
> +#include <linux/bootmem.h>
> +#include <linux/memblock.h>
> +#include <linux/mm.h>
> +#include <asm/proto.h>
> +#include <asm/numa.h>
> +#include <asm/e820.h>
> +#include <asm/apic.h>
> +#include <asm/uv/uv.h>
> +
> +int acpi_numa __initdata;
> +
> +static __init int setup_node(int pxm)
> +{
> +	return acpi_map_pxm_to_node(pxm);
> +}
> +
> +static __init void bad_srat(void)
> +{
> +	printk(KERN_ERR "SRAT: SRAT not used.\n");
> +	acpi_numa = -1;
> +}
> +
> +static __init inline int srat_disabled(void)
> +{
> +	return acpi_numa < 0;
> +}
> +
> +/* Callback for SLIT parsing */
> +void __init acpi_numa_slit_init(struct acpi_table_slit *slit)
> +{
> +	int i, j;
> +
> +	for (i = 0; i < slit->locality_count; i++)
> +		for (j = 0; j < slit->locality_count; j++)
> +			numa_set_distance(pxm_to_node(i), pxm_to_node(j),
> +				slit->entry[slit->locality_count * i + j]);
> +}
> +
> +/* Callback for Proximity Domain -> x2APIC mapping */
> +void __init
> +acpi_numa_x2apic_affinity_init(struct acpi_srat_x2apic_cpu_affinity *pa)
> +{
> +	int pxm, node;
> +	int apic_id;
> +
> +	if (srat_disabled())
> +		return;
> +	if (pa->header.length < sizeof(struct acpi_srat_x2apic_cpu_affinity)) {
> +		bad_srat();
> +		return;
> +	}
> +	if ((pa->flags & ACPI_SRAT_CPU_ENABLED) == 0)
> +		return;
> +	pxm = pa->proximity_domain;
> +	apic_id = pa->apic_id;
> +	if (!apic->apic_id_valid(apic_id)) {
> +		printk(KERN_INFO "SRAT: PXM %u -> X2APIC 0x%04x ignored\n",
> +			 pxm, apic_id);
> +		return;
> +	}
> +	node = setup_node(pxm);
> +	if (node < 0) {
> +		printk(KERN_ERR "SRAT: Too many proximity domains %x\n", pxm);
> +		bad_srat();
> +		return;
> +	}
> +
> +	if (apic_id >= MAX_LOCAL_APIC) {
> +		printk(KERN_INFO "SRAT: PXM %u -> APIC 0x%04x -> Node %u skipped apicid that is too big\n", pxm, apic_id, node);
> +		return;
> +	}
> +	set_apicid_to_node(apic_id, node);
> +	node_set(node, numa_nodes_parsed);
> +	acpi_numa = 1;
> +	printk(KERN_INFO "SRAT: PXM %u -> APIC 0x%04x -> Node %u\n",
> +	       pxm, apic_id, node);
> +}
> +
> +/* Callback for Proximity Domain -> LAPIC mapping */
> +void __init
> +acpi_numa_processor_affinity_init(struct acpi_srat_cpu_affinity *pa)
> +{
> +	int pxm, node;
> +	int apic_id;
> +
> +	if (srat_disabled())
> +		return;
> +	if (pa->header.length != sizeof(struct acpi_srat_cpu_affinity)) {
> +		bad_srat();
> +		return;
> +	}
> +	if ((pa->flags & ACPI_SRAT_CPU_ENABLED) == 0)
> +		return;
> +	pxm = pa->proximity_domain_lo;
> +	if (acpi_srat_revision >= 2)
> +		pxm |= *((unsigned int*)pa->proximity_domain_hi) << 8;
> +	node = setup_node(pxm);
> +	if (node < 0) {
> +		printk(KERN_ERR "SRAT: Too many proximity domains %x\n", pxm);
> +		bad_srat();
> +		return;
> +	}
> +
> +	if (get_uv_system_type() >= UV_X2APIC)
> +		apic_id = (pa->apic_id << 8) | pa->local_sapic_eid;
> +	else
> +		apic_id = pa->apic_id;
> +
> +	if (apic_id >= MAX_LOCAL_APIC) {
> +		printk(KERN_INFO "SRAT: PXM %u -> APIC 0x%02x -> Node %u skipped apicid that is too big\n", pxm, apic_id, node);
> +		return;
> +	}
> +
> +	set_apicid_to_node(apic_id, node);
> +	node_set(node, numa_nodes_parsed);
> +	acpi_numa = 1;
> +	printk(KERN_INFO "SRAT: PXM %u -> APIC 0x%02x -> Node %u\n",
> +	       pxm, apic_id, node);
> +}
> +
> +#ifdef CONFIG_MEMORY_HOTPLUG
> +static inline int save_add_info(void) {return 1;}
> +#else
> +static inline int save_add_info(void) {return 0;}
> +#endif
> +
> +/* Callback for parsing of the Proximity Domain <-> Memory Area mappings */
> +int __init
> +acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma)
> +{
> +	u64 start, end;
> +	int node, pxm;
> +
> +	if (srat_disabled())
> +		goto out_err;
> +	if (ma->header.length != sizeof(struct acpi_srat_mem_affinity))
> +		goto out_err_bad_srat;
> +	if ((ma->flags & ACPI_SRAT_MEM_ENABLED) == 0)
> +		goto out_err;
> +	if ((ma->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE) && !save_add_info())
> +		goto out_err;
> +
> +	start = ma->base_address;
> +	end = start + ma->length;
> +	pxm = ma->proximity_domain;
> +	if (acpi_srat_revision <= 1)
> +		pxm &= 0xff;
> +
> +	node = setup_node(pxm);
> +	if (node < 0) {
> +		printk(KERN_ERR "SRAT: Too many proximity domains.\n");
> +		goto out_err_bad_srat;
> +	}
> +
> +	if (numa_add_memblk(node, start, end) < 0)
> +		goto out_err_bad_srat;
> +
> +	node_set(node, numa_nodes_parsed);
> +
> +	printk(KERN_INFO "SRAT: Node %u PXM %u [mem %#010Lx-%#010Lx]\n",
> +	       node, pxm,
> +	       (unsigned long long) start, (unsigned long long) end - 1);
> +
> +	return 0;
> +out_err_bad_srat:
> +	bad_srat();
> +out_err:
> +	return -1;
> +}
> +
> +void __init acpi_numa_arch_fixup(void) {}
> +
> +int __init x86_acpi_numa_init(void)
> +{
> +	int ret;
> +
> +	ret = acpi_numa_init();
> +	if (ret < 0)
> +		return ret;
> +	return srat_disabled() ? -EINVAL : 0;
> +}
> diff --git a/arch/x86/mm/Makefile b/arch/x86/mm/Makefile
> index 23d8e5f..d6f3692 100644
> --- a/arch/x86/mm/Makefile
> +++ b/arch/x86/mm/Makefile
> @@ -24,7 +24,6 @@ obj-$(CONFIG_MMIOTRACE_TEST)	+= testmmiotrace.o
>   
>   obj-$(CONFIG_NUMA)		+= numa.o numa_$(BITS).o
>   obj-$(CONFIG_AMD_NUMA)		+= amdtopology.o
> -obj-$(CONFIG_ACPI_NUMA)		+= srat.o
>   obj-$(CONFIG_NUMA_EMU)		+= numa_emulation.o
>   
>   obj-$(CONFIG_MEMTEST)		+= memtest.o
> diff --git a/arch/x86/mm/srat.c b/arch/x86/mm/srat.c
> deleted file mode 100644
> index cdd0da9..0000000
> --- a/arch/x86/mm/srat.c
> +++ /dev/null
> @@ -1,198 +0,0 @@
> -/*
> - * ACPI 3.0 based NUMA setup
> - * Copyright 2004 Andi Kleen, SuSE Labs.
> - *
> - * Reads the ACPI SRAT table to figure out what memory belongs to which CPUs.
> - *
> - * Called from acpi_numa_init while reading the SRAT and SLIT tables.
> - * Assumes all memory regions belonging to a single proximity domain
> - * are in one chunk. Holes between them will be included in the node.
> - */
> -
> -#include <linux/kernel.h>
> -#include <linux/acpi.h>
> -#include <linux/mmzone.h>
> -#include <linux/bitmap.h>
> -#include <linux/module.h>
> -#include <linux/topology.h>
> -#include <linux/bootmem.h>
> -#include <linux/memblock.h>
> -#include <linux/mm.h>
> -#include <asm/proto.h>
> -#include <asm/numa.h>
> -#include <asm/e820.h>
> -#include <asm/apic.h>
> -#include <asm/uv/uv.h>
> -
> -int acpi_numa __initdata;
> -
> -static __init int setup_node(int pxm)
> -{
> -	return acpi_map_pxm_to_node(pxm);
> -}
> -
> -static __init void bad_srat(void)
> -{
> -	printk(KERN_ERR "SRAT: SRAT not used.\n");
> -	acpi_numa = -1;
> -}
> -
> -static __init inline int srat_disabled(void)
> -{
> -	return acpi_numa < 0;
> -}
> -
> -/* Callback for SLIT parsing */
> -void __init acpi_numa_slit_init(struct acpi_table_slit *slit)
> -{
> -	int i, j;
> -
> -	for (i = 0; i < slit->locality_count; i++)
> -		for (j = 0; j < slit->locality_count; j++)
> -			numa_set_distance(pxm_to_node(i), pxm_to_node(j),
> -				slit->entry[slit->locality_count * i + j]);
> -}
> -
> -/* Callback for Proximity Domain -> x2APIC mapping */
> -void __init
> -acpi_numa_x2apic_affinity_init(struct acpi_srat_x2apic_cpu_affinity *pa)
> -{
> -	int pxm, node;
> -	int apic_id;
> -
> -	if (srat_disabled())
> -		return;
> -	if (pa->header.length < sizeof(struct acpi_srat_x2apic_cpu_affinity)) {
> -		bad_srat();
> -		return;
> -	}
> -	if ((pa->flags & ACPI_SRAT_CPU_ENABLED) == 0)
> -		return;
> -	pxm = pa->proximity_domain;
> -	apic_id = pa->apic_id;
> -	if (!apic->apic_id_valid(apic_id)) {
> -		printk(KERN_INFO "SRAT: PXM %u -> X2APIC 0x%04x ignored\n",
> -			 pxm, apic_id);
> -		return;
> -	}
> -	node = setup_node(pxm);
> -	if (node < 0) {
> -		printk(KERN_ERR "SRAT: Too many proximity domains %x\n", pxm);
> -		bad_srat();
> -		return;
> -	}
> -
> -	if (apic_id >= MAX_LOCAL_APIC) {
> -		printk(KERN_INFO "SRAT: PXM %u -> APIC 0x%04x -> Node %u skipped apicid that is too big\n", pxm, apic_id, node);
> -		return;
> -	}
> -	set_apicid_to_node(apic_id, node);
> -	node_set(node, numa_nodes_parsed);
> -	acpi_numa = 1;
> -	printk(KERN_INFO "SRAT: PXM %u -> APIC 0x%04x -> Node %u\n",
> -	       pxm, apic_id, node);
> -}
> -
> -/* Callback for Proximity Domain -> LAPIC mapping */
> -void __init
> -acpi_numa_processor_affinity_init(struct acpi_srat_cpu_affinity *pa)
> -{
> -	int pxm, node;
> -	int apic_id;
> -
> -	if (srat_disabled())
> -		return;
> -	if (pa->header.length != sizeof(struct acpi_srat_cpu_affinity)) {
> -		bad_srat();
> -		return;
> -	}
> -	if ((pa->flags & ACPI_SRAT_CPU_ENABLED) == 0)
> -		return;
> -	pxm = pa->proximity_domain_lo;
> -	if (acpi_srat_revision >= 2)
> -		pxm |= *((unsigned int*)pa->proximity_domain_hi) << 8;
> -	node = setup_node(pxm);
> -	if (node < 0) {
> -		printk(KERN_ERR "SRAT: Too many proximity domains %x\n", pxm);
> -		bad_srat();
> -		return;
> -	}
> -
> -	if (get_uv_system_type() >= UV_X2APIC)
> -		apic_id = (pa->apic_id << 8) | pa->local_sapic_eid;
> -	else
> -		apic_id = pa->apic_id;
> -
> -	if (apic_id >= MAX_LOCAL_APIC) {
> -		printk(KERN_INFO "SRAT: PXM %u -> APIC 0x%02x -> Node %u skipped apicid that is too big\n", pxm, apic_id, node);
> -		return;
> -	}
> -
> -	set_apicid_to_node(apic_id, node);
> -	node_set(node, numa_nodes_parsed);
> -	acpi_numa = 1;
> -	printk(KERN_INFO "SRAT: PXM %u -> APIC 0x%02x -> Node %u\n",
> -	       pxm, apic_id, node);
> -}
> -
> -#ifdef CONFIG_MEMORY_HOTPLUG
> -static inline int save_add_info(void) {return 1;}
> -#else
> -static inline int save_add_info(void) {return 0;}
> -#endif
> -
> -/* Callback for parsing of the Proximity Domain <-> Memory Area mappings */
> -int __init
> -acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma)
> -{
> -	u64 start, end;
> -	int node, pxm;
> -
> -	if (srat_disabled())
> -		goto out_err;
> -	if (ma->header.length != sizeof(struct acpi_srat_mem_affinity))
> -		goto out_err_bad_srat;
> -	if ((ma->flags & ACPI_SRAT_MEM_ENABLED) == 0)
> -		goto out_err;
> -	if ((ma->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE) && !save_add_info())
> -		goto out_err;
> -
> -	start = ma->base_address;
> -	end = start + ma->length;
> -	pxm = ma->proximity_domain;
> -	if (acpi_srat_revision <= 1)
> -		pxm &= 0xff;
> -
> -	node = setup_node(pxm);
> -	if (node < 0) {
> -		printk(KERN_ERR "SRAT: Too many proximity domains.\n");
> -		goto out_err_bad_srat;
> -	}
> -
> -	if (numa_add_memblk(node, start, end) < 0)
> -		goto out_err_bad_srat;
> -
> -	node_set(node, numa_nodes_parsed);
> -
> -	printk(KERN_INFO "SRAT: Node %u PXM %u [mem %#010Lx-%#010Lx]\n",
> -	       node, pxm,
> -	       (unsigned long long) start, (unsigned long long) end - 1);
> -
> -	return 0;
> -out_err_bad_srat:
> -	bad_srat();
> -out_err:
> -	return -1;
> -}
> -
> -void __init acpi_numa_arch_fixup(void) {}
> -
> -int __init x86_acpi_numa_init(void)
> -{
> -	int ret;
> -
> -	ret = acpi_numa_init();
> -	if (ret < 0)
> -		return ret;
> -	return srat_disabled() ? -EINVAL : 0;
> -}
> 


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/