RE: [PATCH 2/2] ARM: davinci: da850: add wdt OF_DEV_AUXDATA entry

[Kumar, Anil]

On Mon, Feb 04, 2013 at 17:20:55, Nori, Sekhar wrote:
> Hi Anil,
> 
> On 1/24/2013 2:08 PM, Kumar, Anil wrote:
> > Add OF_DEV_AUXDATA for wdt driver in da850 board dt
> > file to use wdt clock.
> > 
> > Signed-off-by: Kumar, Anil <anilkumar.v@xxxxxx>
> > ---
> > :100644 100644 37c27af... 1b295d2... M	arch/arm/mach-davinci/da8xx-dt.c
> >  arch/arm/mach-davinci/da8xx-dt.c |    8 +++++++-
> >  1 files changed, 7 insertions(+), 1 deletions(-)
> > 
> > diff --git a/arch/arm/mach-davinci/da8xx-dt.c b/arch/arm/mach-davinci/da8xx-dt.c
> > index 37c27af..1b295d2 100644
> > --- a/arch/arm/mach-davinci/da8xx-dt.c
> > +++ b/arch/arm/mach-davinci/da8xx-dt.c
> > @@ -37,11 +37,17 @@ static void __init da8xx_init_irq(void)
> >  	of_irq_init(da8xx_irq_match);
> >  }
> >  
> > +struct of_dev_auxdata da850_evm_auxdata_lookup[] __initdata = {
> 
> Auxdata is not evm specific. This can instead be called da850_auxdata_lookup[].

ok

> 
> Also, I dont think it is necessary to add auxdata in a separate patch 
> from dt nodes. So, I fixed these issues and came up with below patch. I 
> tested basic wdt reboot. reboot command is still broken (with or 
> without this patch). Can you please look at that?
> 

ok, I will look into reboot command issue.

> Thanks,
> Sekhar
> 
> ----8<----
> From: "Kumar, Anil" <anilkumar.v@xxxxxx>
> Date: Thu, 24 Jan 2013 14:08:14 +0530
> Subject: [PATCH 1/1] ARM: davinci: da850: add wdt DT node
> 
> Add da850 wdt DT node.
> 
> Signed-off-by: Kumar, Anil <anilkumar.v@xxxxxx>
> Signed-off-by: Sekhar Nori <nsekhar@xxxxxx>
> ---
>  arch/arm/boot/dts/da850-evm.dts  |    3 +++
>  arch/arm/boot/dts/da850.dtsi     |    5 +++++
>  arch/arm/mach-davinci/da8xx-dt.c |    8 +++++++-
>  3 files changed, 15 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
> index fa04152..cc777dc 100644
> --- a/arch/arm/boot/dts/da850-evm.dts
> +++ b/arch/arm/boot/dts/da850-evm.dts
> @@ -30,6 +30,9 @@
>  		rtc0: rtc@1c23000 {
>  			status = "okay";
>  		};
> +		wdt: wdt@1c21000 {
> +			status = "okay";
> +		};
>  	};
>  	nand_cs3@62000000 {
>  		status = "okay";
> diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
> index 8dd15c0..2800090 100644
> --- a/arch/arm/boot/dts/da850.dtsi
> +++ b/arch/arm/boot/dts/da850.dtsi
> @@ -88,6 +88,11 @@
>  				      19>;
>  			status = "disabled";
>  		};
> +		wdt: wdt@1c21000 {
> +			compatible = "ti,davinci-wdt";
> +			reg = <0x21000 0xfff>;
> +			status = "disabled";
> +		};
>  	};
>  	nand_cs3@62000000 {
>  		compatible = "ti,davinci-nand";
> diff --git a/arch/arm/mach-davinci/da8xx-dt.c b/arch/arm/mach-davinci/da8xx-dt.c
> index 37c27af..90c3c69 100644
> --- a/arch/arm/mach-davinci/da8xx-dt.c
> +++ b/arch/arm/mach-davinci/da8xx-dt.c
> @@ -37,11 +37,17 @@ static void __init da8xx_init_irq(void)
>  	of_irq_init(da8xx_irq_match);
>  }
>  
> +struct of_dev_auxdata da850_auxdata_lookup[] __initdata = {
> +	OF_DEV_AUXDATA("ti,davinci-wdt", 0x01c21000, "watchdog", NULL),
> +	{}
> +};
> +
>  #ifdef CONFIG_ARCH_DAVINCI_DA850
>  
>  static void __init da850_init_machine(void)
>  {
> -	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
> +	of_platform_populate(NULL, of_default_bus_match_table,
> +			     da850_auxdata_lookup, NULL);
>  
>  	da8xx_uart_clk_enable();
>  }
> 
> 

èº{.nÇ+‰·Ÿ®‰­†+%ŠËlzwm…ébëæìr¸›zX§»®w¥Š{ayºÊÚë,j­¢f£¢·hš‹àz¹®w¥¢¸¢·¦j:+v‰¨ŠwèjØm¶Ÿÿ¾«‘êçzZ+ƒùšŽŠÝj"ú!¶iO•æ¬z·švØ^¶m§ÿðÃnÆàþY&—