Re: [PATCH 09/62] atm/nicstar: convert to idr_alloc()

[chas williams - CONTRACTOR]

On Mon, 4 Feb 2013 09:06:24 -0800
Tejun Heo <tj@xxxxxxxxxx> wrote:

> Hello, Chas.
> 
> On Mon, Feb 04, 2013 at 09:04:10AM -0500, chas williams - CONTRACTOR wrote:
> > I don't quite understand your comment.  idr_pre_get() returns 0 in the
> > case of failure.
> 
> So, if you do the following,
> 
> 	int id1 = 0, id2 = 0;
> 
> 	if (!id1)
> 		err = idr_get_new_above(&card->idr, handle1, 0, &id1);
> 	if (!id2 && err == 0)
> 		err = idr_get_new_above(&card->idr, handle2, 0, &id2);
> 	if (err)
> 		goto out;
> 									    
> You have no way of telling whether id1/2 are allocated or not.  0 is
> the special "not allocated" value but it also is a valid ID.  The
> error path should be freeing id1/2 if either of them has been
> allocated but it doesn't and can't with 0 as the non-allocated value.

yeah, i see now.  it didn't understand what idr_get_new_above() was
doing with the start id.  i assumed that it would return something
greater than the start id.  i guess it never did return the starting id
(atleast after some initial failure).

additionally, yes, cleaning up if the second allocation failed was never
done.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/