RE: [PATCH v4 5/8] MFD: ti_am335x_tscadc: Add DT support

[Hiremath, Vaibhav]

On Thu, Jan 31, 2013 at 09:41:11, Patil, Rachna wrote:
> On Wed, Jan 30, 2013 at 16:10:09, Koen Kooi wrote:
> > 
> > Op 24 jan. 2013, om 04:45 heeft "Patil, Rachna" <rachna@xxxxxx> het volgende geschreven:
> > 
> > > From: "Patil, Rachna" <rachna@xxxxxx>
> > > 
> > > Make changes to add DT support in the MFD core driver.
> > > 
> > > Signed-off-by: Patil, Rachna <rachna@xxxxxx>
> > > ---
> > > Changes in v4:
> > > 	Non-standard properties prefixed with vendor name.
> > > 
> > > drivers/mfd/ti_am335x_tscadc.c |   28 +++++++++++++++++++++++-----
> > > 1 file changed, 23 insertions(+), 5 deletions(-)
> > > 
> > > diff --git a/drivers/mfd/ti_am335x_tscadc.c 
> > > b/drivers/mfd/ti_am335x_tscadc.c index e9f3fb5..87b446b 100644
> > > --- a/drivers/mfd/ti_am335x_tscadc.c
> > > +++ b/drivers/mfd/ti_am335x_tscadc.c
> > > @@ -22,6 +22,8 @@
> > > #include <linux/regmap.h>
> > > #include <linux/mfd/core.h>
> > > #include <linux/pm_runtime.h>
> > > +#include <linux/of.h>
> > > +#include <linux/of_device.h>
> > > 
> > > #include <linux/mfd/ti_am335x_tscadc.h> #include 
> > > <linux/input/ti_am335x_tsc.h>
> > > @@ -64,20 +66,31 @@ static	int ti_tscadc_probe(struct platform_device *pdev)
> > > 	struct resource		*res;
> > > 	struct clk		*clk;
> > > 	struct mfd_tscadc_board	*pdata = pdev->dev.platform_data;
> > > +	struct device_node	*node = pdev->dev.of_node;
> > > 	struct mfd_cell		*cell;
> > > 	int			err, ctrl;
> > > 	int			clk_value, clock_rate;
> > > -	int			tsc_wires, adc_channels = 0, total_channels;
> > > +	int			tsc_wires = 0, adc_channels = 0, total_channels;
> > > 
> > > -	if (!pdata) {
> > > +	if (!pdata && !pdev->dev.of_node) {
> > > 		dev_err(&pdev->dev, "Could not find platform data\n");
> > > 		return -EINVAL;
> > > 	}
> > > 
> > > -	if (pdata->adc_init)
> > > -		adc_channels = pdata->adc_init->adc_channels;
> > > +	if (pdev->dev.platform_data) {
> > > +		if (pdata->tsc_init)
> > > +			tsc_wires = pdata->tsc_init->wires;
> > > +
> > > +		if (pdata->adc_init)
> > > +			adc_channels = pdata->adc_init->adc_channels;
> > > +	} else {
> > > +		node = of_find_node_by_name(pdev->dev.of_node, "tsc");
> > > +		of_property_read_u32(node, "ti,wires", &tsc_wires);
> > > +
> > > +		node = of_find_node_by_name(pdev->dev.of_node, "adc");
> > > +		of_property_read_u32(node, "ti,adc-channels", &adc_channels);
> > > +	}
> > 
> > Since AM335x is DT only, why is there a platform data codepath and why is it the first branch it tries? And I guess the next question is related to the first: why doesn't it work when used with DT? When I copy over the nodes from the evm.dts to my board I get "tsc tsc: Missing platform data" in dmesg.
> 
> This IP came up 1st on AM335x, but it is not platform dependent. The driver can be used on other platforms where-in DT is not supported.
> According to the maintainers platform data takes precedence over DT. Hence the order.
> 

Rachana,

I see no point adding support for platform_data when you know that none of 
older platforms are going to use this driver and all future platforms _must_ 
follow device-tree model.

So I agree that you should remove board file dependency from the driver.


> I do not see "Missing platform data" error msg in the latest driver. I am not able to trace from where this got populated.
> 

Can you share the branch which you have tested?

Thanks,
Vaibhav

> > 
> > What are the chances this driver will work when applied on top of 3.8-rcX? Has it even been tested with that? Has it been tested at all?
> 
> This driver has been tested on top of v3.8-rc3 on a AM335x EVM.
> 
> Regards,
> Rachna
> 
> _______________________________________________
> devicetree-discuss mailing list
> devicetree-discuss@xxxxxxxxxxxxxxxx
> https://lists.ozlabs.org/listinfo/devicetree-discuss
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/