[PATCH v2 3/3] ARM: dts: omap: Add usb_otg and glue data

[Kishon Vijay Abraham I]

Add usb otg data node in omap4/omap3 device tree file. Also update
the node with board specific setting in omapx-<board>.dts file.
The dt data specifies among others the interface type (ULPI or UTMI), mode
which is mostly OTG, power that specifies the amount of power this can supply
when in host mode.
The information about this node is available @
Documentation/devicetree/bindings/usb/omap-usb.txt

Acked-by: Felipe Balbi <balbi@xxxxxx>
Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
---
 Documentation/devicetree/bindings/usb/omap-usb.txt |    2 ++
 arch/arm/boot/dts/omap3-beagle-xm.dts              |    6 ++++++
 arch/arm/boot/dts/omap3-evm.dts                    |    6 ++++++
 arch/arm/boot/dts/omap3-overo.dtsi                 |    6 ++++++
 arch/arm/boot/dts/omap3.dtsi                       |   12 ++++++++++++
 arch/arm/boot/dts/omap4-panda.dts                  |    6 ++++++
 arch/arm/boot/dts/omap4-sdp.dts                    |    6 ++++++
 arch/arm/boot/dts/omap4.dtsi                       |   13 +++++++++++++
 arch/arm/boot/dts/twl4030.dtsi                     |    2 +-
 9 files changed, 58 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/usb/omap-usb.txt b/Documentation/devicetree/bindings/usb/omap-usb.txt
index 704b684..90360e3 100644
--- a/Documentation/devicetree/bindings/usb/omap-usb.txt
+++ b/Documentation/devicetree/bindings/usb/omap-usb.txt
@@ -18,6 +18,7 @@ OMAP MUSB GLUE
    represents PERIPHERAL.
  - power : Should be "50". This signifies the controller can supply upto
    100mA when operating in host mode.
+ - usb_phy : the phandle for the PHY device
 
 Optional properties:
  - ctrl_module : phandle of the control module this glue uses to write to
@@ -32,6 +33,7 @@ usb_otg_hs: usb_otg_hs@4a0ab000 {
 	num_eps = <16>;
 	ram_bits = <12>;
 	ctrl_module = <&omap_control_usb>;
+	usb_phy = <&usb2_phy>;
 };
 
 Board specific device node entry
diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts
index 3705a81..cb07583 100644
--- a/arch/arm/boot/dts/omap3-beagle-xm.dts
+++ b/arch/arm/boot/dts/omap3-beagle-xm.dts
@@ -107,3 +107,9 @@
 	 */
 	ti,pulldowns = <0x03a1c4>;
 };
+
+&usb_otg_hs {
+	interface_type = <0>;
+	mode = <3>;
+	power = <50>;
+};
diff --git a/arch/arm/boot/dts/omap3-evm.dts b/arch/arm/boot/dts/omap3-evm.dts
index e8ba1c2..afb9ba9 100644
--- a/arch/arm/boot/dts/omap3-evm.dts
+++ b/arch/arm/boot/dts/omap3-evm.dts
@@ -59,3 +59,9 @@
 &twl_gpio {
 	ti,use-leds;
 };
+
+&usb_otg_hs {
+	interface_type = <0>;
+	mode = <3>;
+	power = <50>;
+};
diff --git a/arch/arm/boot/dts/omap3-overo.dtsi b/arch/arm/boot/dts/omap3-overo.dtsi
index 89808ce..4b3d157 100644
--- a/arch/arm/boot/dts/omap3-overo.dtsi
+++ b/arch/arm/boot/dts/omap3-overo.dtsi
@@ -55,3 +55,9 @@
 &twl_gpio {
 	ti,use-leds;
 };
+
+&usb_otg_hs {
+	interface_type = <0>;
+	mode = <3>;
+	power = <50>;
+};
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 1acc261..176561b 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -397,5 +397,17 @@
 			ti,timer-alwon;
 			ti,timer-secure;
 		};
+
+		usb_otg_hs: usb_otg_hs@480ab000 {
+			compatible = "ti,omap3-musb";
+			reg = <0x480ab000 0x1000>;
+			interrupts = <0 92 0x4>, <0 93 0x4>;
+			interrupt-names = "mc", "dma";
+			ti,hwmods = "usb_otg_hs";
+			usb_phy = <&usb2_phy>;
+			multipoint = <1>;
+			num_eps = <16>;
+			ram_bits = <12>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts
index 4122efe..612c9bb 100644
--- a/arch/arm/boot/dts/omap4-panda.dts
+++ b/arch/arm/boot/dts/omap4-panda.dts
@@ -206,3 +206,9 @@
 &twl_usb_comparator {
 	usb-supply = <&vusb>;
 };
+
+&usb_otg_hs {
+	interface_type = <1>;
+	mode = <3>;
+	power = <50>;
+};
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index 43e5258..582d7ee 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -428,3 +428,9 @@
 &twl_usb_comparator {
 	usb-supply = <&vusb>;
 };
+
+&usb_otg_hs {
+	interface_type = <1>;
+	mode = <3>;
+	power = <50>;
+};
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 5f68d68..a57ec29 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -541,5 +541,18 @@
 			reg-names = "control_dev_conf", "otghs_control";
 			ti,type = <1>;
 		};
+
+		usb_otg_hs: usb_otg_hs@4a0ab000 {
+			compatible = "ti,omap4-musb";
+			reg = <0x4a0ab000 0x7ff>;
+			interrupts = <0 92 0x4>, <0 93 0x4>;
+			interrupt-names = "mc", "dma";
+			ti,hwmods = "usb_otg_hs";
+			usb_phy = <&usb2_phy>;
+			multipoint = <1>;
+			num_eps = <16>;
+			ram_bits = <12>;
+			ti,has_mailbox;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/twl4030.dtsi b/arch/arm/boot/dts/twl4030.dtsi
index ed0bc95..398d2c3 100644
--- a/arch/arm/boot/dts/twl4030.dtsi
+++ b/arch/arm/boot/dts/twl4030.dtsi
@@ -67,7 +67,7 @@
 		#interrupt-cells = <1>;
 	};
 
-	twl4030-usb {
+	usb2_phy: twl4030-usb {
 		compatible = "ti,twl4030-usb";
 		interrupts = <10>, <4>;
 		usb1v5-supply = <&vusb1v5>;
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/