[PATCH 26/35] x86, boot: Update comments about entries for 64bit image

[Yinghai Lu]

Now 64bit entry is fixed on 0x200, can not be changed anymore.

Update the comments to reflect that.

Also put info about it in boot.txt

-v2: fix some grammar error

Signed-off-by: Yinghai Lu <yinghai@xxxxxxxxxx>
Cc: Rob Landley <rob@xxxxxxxxxxx>
Cc: Matt Fleming <matt.fleming@xxxxxxxxx>
---
 Documentation/x86/boot.txt         |   38 ++++++++++++++++++++++++++++++++++++
 arch/x86/boot/compressed/head_64.S |   22 ++++++++++++---------
 2 files changed, 51 insertions(+), 9 deletions(-)

diff --git a/Documentation/x86/boot.txt b/Documentation/x86/boot.txt
index ca96344..8eb78f4 100644
--- a/Documentation/x86/boot.txt
+++ b/Documentation/x86/boot.txt
@@ -1042,6 +1042,44 @@ must have read/write permission; CS must be __BOOT_CS and DS, ES, SS
 must be __BOOT_DS; interrupt must be disabled; %esi must hold the base
 address of the struct boot_params; %ebp, %edi and %ebx must be zero.
 
+**** 64-bit BOOT PROTOCOL
+
+For machine with 64bit cpus and 64bit kernel, we could use 64bit bootloader
+and we need a 64-bit boot protocol.
+
+In 64-bit boot protocol, the first step in loading a Linux kernel
+should be to setup the boot parameters (struct boot_params,
+traditionally known as "zero page"). The memory for struct boot_params
+could be allocated anywhere (even above 4G) and initialized to all zero.
+Then, the setup header at offset 0x01f1 of kernel image on should be
+loaded into struct boot_params and examined. The end of setup header
+can be calculated as follows:
+
+	0x0202 + byte value at offset 0x0201
+
+In addition to read/modify/write the setup header of the struct
+boot_params as that of 16-bit boot protocol, the boot loader should
+also fill the additional fields of the struct boot_params as described
+in zero-page.txt.
+
+After setting up the struct boot_params, the boot loader can load
+64-bit kernel in the same way as that of 16-bit boot protocol, but
+kernel could be loaded above 4G.
+
+In 64-bit boot protocol, the kernel is started by jumping to the
+64-bit kernel entry point, which is the start address of loaded
+64-bit kernel plus 0x200.
+
+At entry, the CPU must be in 64-bit mode with paging enabled.
+The range with setup_header.init_size from start address of loaded
+kernel and zero page and command line buffer get ident mapping;
+a GDT must be loaded with the descriptors for selectors
+__BOOT_CS(0x10) and __BOOT_DS(0x18); both descriptors must be 4G flat
+segment; __BOOT_CS must have execute/read permission, and __BOOT_DS
+must have read/write permission; CS must be __BOOT_CS and DS, ES, SS
+must be __BOOT_DS; interrupt must be disabled; %rsi must hold the base
+address of the struct boot_params.
+
 **** EFI HANDOVER PROTOCOL
 
 This protocol allows boot loaders to defer initialisation to the EFI
diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S
index 5c80b94..d9ae9a4 100644
--- a/arch/x86/boot/compressed/head_64.S
+++ b/arch/x86/boot/compressed/head_64.S
@@ -37,6 +37,12 @@
 	__HEAD
 	.code32
 ENTRY(startup_32)
+	/*
+	 * 32bit entry is 0 and it is ABI so immutable!
+	 * If we come here directly from a bootloader,
+	 * kernel(text+data+bss+brk) ramdisk, zero_page, command line
+	 * all need to be under the 4G limit.
+	 */
 	cld
 	/*
 	 * Test KEEP_SEGMENTS flag to see if the bootloader is asking
@@ -182,20 +188,18 @@ ENTRY(startup_32)
 	lret
 ENDPROC(startup_32)
 
-	/*
-	 * Be careful here startup_64 needs to be at a predictable
-	 * address so I can export it in an ELF header.  Bootloaders
-	 * should look at the ELF header to find this address, as
-	 * it may change in the future.
-	 */
 	.code64
 	.org 0x200
 ENTRY(startup_64)
 	/*
+	 * 64bit entry is 0x200 and it is ABI so immutable!
 	 * We come here either from startup_32 or directly from a
-	 * 64bit bootloader.  If we come here from a bootloader we depend on
-	 * an identity mapped page table being provied that maps our
-	 * entire text+data+bss and hopefully all of memory.
+	 * 64bit bootloader.
+	 * If we come here from a bootloader, kernel(text+data+bss+brk),
+	 * ramdisk, zero_page, command line could be above 4G.
+	 * We depend on an identity mapped page table being provided
+	 * that maps our entire kernel(text+data+bss+brk), zero page
+	 * and command line.
 	 */
 #ifdef CONFIG_EFI_STUB
 	/*
-- 
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/