Re: [PATCH v4 12/12] video: da8xx-fb: CCF clock divider handling

[Mike Turquette]

Quoting Afzal Mohammed (2013-01-23 03:48:56)
<snip>
> +static inline void da8xx_fb_clkc_enable(void)
> +{
>         if (lcd_revision == LCD_VERSION_2)
>                 lcdc_write(LCD_V2_DMA_CLK_EN | LCD_V2_LIDD_CLK_EN |
>                                 LCD_V2_CORE_CLK_EN, LCD_CLK_ENABLE_REG);
>  }
>  
> -static inline void da8xx_fb_calc_config_clk_divider(struct da8xx_fb_par *par,
> +#ifdef CONFIG_COMMON_CLK
> +static inline int da8xx_fb_calc_config_clk_divider(struct da8xx_fb_par *par,
> +                                                   struct fb_videomode *mode)
> +{
> +       int ret;
> +
> +       ret = clk_set_rate(par->child_clk, PICOS2KHZ(mode->pixclock) * 1000);
> +       if (IS_ERR_VALUE(ret)) {
> +               dev_err(par->dev, "unable to setup pixel clock of %u ps",
> +                       mode->pixclock);
> +               return ret;
> +       }
> +       da8xx_fb_clkc_enable();

It looks like you are using the legacy method to enable/disable the
clock and using the CCF basic divider to set the rate.  This feels a bit
hacky to me.  If you want to model your clock in CCF then you should
probably model the whole clock, not just the rate-change aspects of it.

Have you looked at the composite clock patches from Prashant?  Those
might give you the divider+gate properties that you are looking for:
http://article.gmane.org/gmane.linux.kernel/1416697

Regards,
Mike
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/