Re: [PATCH] OMAP: omap4-panda: add UART2 muxing for WiLink sharedtransport

[Tony Lindgren]

* Luciano Coelho <coelho@xxxxxx> [130121 03:18]:
> Add the UART2 muxing data to the board file (this used to be,
> erroneously, done in the bootloader).
> 
> Cc: stable <stable@xxxxxxxxxxxxxxx> [3.7]
> Signed-off-by: Luciano Coelho <coelho@xxxxxx>

Thanks applying into omap-for-v3.8-rc4/fixes.

Regards,

Tony

> ---
>  arch/arm/mach-omap2/board-omap4panda.c |    6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
> index 5c8e9ce..769c1fe 100644
> --- a/arch/arm/mach-omap2/board-omap4panda.c
> +++ b/arch/arm/mach-omap2/board-omap4panda.c
> @@ -397,6 +397,12 @@ static struct omap_board_mux board_mux[] __initdata = {
>  		  OMAP_PULL_ENA),
>  	OMAP4_MUX(ABE_MCBSP1_FSX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
>  
> +	/* UART2 - BT/FM/GPS shared transport */
> +	OMAP4_MUX(UART2_CTS,	OMAP_PIN_INPUT	| OMAP_MUX_MODE0),
> +	OMAP4_MUX(UART2_RTS,	OMAP_PIN_OUTPUT	| OMAP_MUX_MODE0),
> +	OMAP4_MUX(UART2_RX,	OMAP_PIN_INPUT	| OMAP_MUX_MODE0),
> +	OMAP4_MUX(UART2_TX,	OMAP_PIN_OUTPUT	| OMAP_MUX_MODE0),
> +
>  	{ .reg_offset = OMAP_MUX_TERMINATOR },
>  };
>  
> -- 
> 1.7.10.4
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/