[PATCH 08/24] pm2301: Clean-up PM2301 interrupt management
From: Lee Jones
Date: Mon Jan 21 2013 - 07:09:19 EST
From: Olivier Clergeaud <olivier.clergeaud@xxxxxxxxxxxxxx>
Fix the way interrupts are handled within the PM2301 charging driver.
Signed-off-by: Lee Jones <lee.jones@xxxxxxxxxx>
Signed-off-by: Rajkumar Kasirajan <rajkumar.kasirajan@xxxxxxxxxxxxxx>
Reviewed-by: Olivier CLERGEAUD <olivier.clergeaud@xxxxxxxxxxxxxx>
Reviewed-by: Marcus COOPER <marcus.xm.cooper@xxxxxxxxxxxxxx>
Reviewed-by: Michel JAOUEN <michel.jaouen@xxxxxxxxxxxxxx>
Tested-by: Michel JAOUEN <michel.jaouen@xxxxxxxxxxxxxx>
---
drivers/power/pm2301_charger.c | 173 ++++++++++++++++++++++++++++------------
drivers/power/pm2301_charger.h | 29 ++++++-
2 files changed, 148 insertions(+), 54 deletions(-)
diff --git a/drivers/power/pm2301_charger.c b/drivers/power/pm2301_charger.c
index c196de7..316d5f0 100644
--- a/drivers/power/pm2301_charger.c
+++ b/drivers/power/pm2301_charger.c
@@ -224,7 +224,7 @@ static int pm2xxx_charger_bat_disc_mngt(struct pm2xxx_charger *pm2, int val)
{
dev_dbg(pm2->dev, "battery disconnected\n");
- return (pm2xxx_charging_disable_mngt(pm2));
+ return 0;
}
static int pm2xxx_charger_detection(struct pm2xxx_charger *pm2, u8 *val)
@@ -275,17 +275,17 @@ static int pm2xxx_charger_itv_pwr_unplug_mngt(struct pm2xxx_charger *pm2,
return 0;
}
-static int pm2_int_reg0(struct pm2xxx_charger *pm2)
+static int pm2_int_reg0(void *pm2_data, int val)
{
+ struct pm2xxx_charger *pm2 = pm2_data;
int ret = 0;
- if (pm2->pm2_int[0] &
- (PM2XXX_INT1_ITVBATLOWR | PM2XXX_INT1_ITVBATLOWF)) {
- ret = pm2xxx_charger_vbat_lsig_mngt(pm2, pm2->pm2_int[0] &
+ if (val & (PM2XXX_INT1_ITVBATLOWR | PM2XXX_INT1_ITVBATLOWF)) {
+ ret = pm2xxx_charger_vbat_lsig_mngt(pm2, val &
(PM2XXX_INT1_ITVBATLOWR | PM2XXX_INT1_ITVBATLOWF));
}
- if (pm2->pm2_int[0] & PM2XXX_INT1_ITVBATDISCONNECT) {
+ if (val & PM2XXX_INT1_ITVBATDISCONNECT) {
ret = pm2xxx_charger_bat_disc_mngt(pm2,
PM2XXX_INT1_ITVBATDISCONNECT);
}
@@ -293,21 +293,21 @@ static int pm2_int_reg0(struct pm2xxx_charger *pm2)
return ret;
}
-static int pm2_int_reg1(struct pm2xxx_charger *pm2)
+static int pm2_int_reg1(void *pm2_data, int val)
{
+ struct pm2xxx_charger *pm2 = pm2_data;
int ret = 0;
- if (pm2->pm2_int[1] &
- (PM2XXX_INT2_ITVPWR1PLUG | PM2XXX_INT2_ITVPWR2PLUG)) {
+ if (val & (PM2XXX_INT2_ITVPWR1PLUG | PM2XXX_INT2_ITVPWR2PLUG)) {
dev_dbg(pm2->dev , "Main charger plugged\n");
- ret = pm2xxx_charger_itv_pwr_plug_mngt(pm2, pm2->pm2_int[1] &
+ ret = pm2xxx_charger_itv_pwr_plug_mngt(pm2, val &
(PM2XXX_INT2_ITVPWR1PLUG | PM2XXX_INT2_ITVPWR2PLUG));
}
- if (pm2->pm2_int[1] &
+ if (val &
(PM2XXX_INT2_ITVPWR1UNPLUG | PM2XXX_INT2_ITVPWR2UNPLUG)) {
dev_dbg(pm2->dev , "Main charger unplugged\n");
- ret = pm2xxx_charger_itv_pwr_unplug_mngt(pm2, pm2->pm2_int[1] &
+ ret = pm2xxx_charger_itv_pwr_unplug_mngt(pm2, val &
(PM2XXX_INT2_ITVPWR1UNPLUG |
PM2XXX_INT2_ITVPWR2UNPLUG));
}
@@ -315,14 +315,15 @@ static int pm2_int_reg1(struct pm2xxx_charger *pm2)
return ret;
}
-static int pm2_int_reg2(struct pm2xxx_charger *pm2)
+static int pm2_int_reg2(void *pm2_data, int val)
{
+ struct pm2xxx_charger *pm2 = pm2_data;
int ret = 0;
- if (pm2->pm2_int[2] & PM2XXX_INT3_ITAUTOTIMEOUTWD)
- ret = pm2xxx_charger_wd_exp_mngt(pm2, pm2->pm2_int[2]);
+ if (val & PM2XXX_INT3_ITAUTOTIMEOUTWD)
+ ret = pm2xxx_charger_wd_exp_mngt(pm2, val);
- if (pm2->pm2_int[2] & (PM2XXX_INT3_ITCHPRECHARGEWD |
+ if (val & (PM2XXX_INT3_ITCHPRECHARGEWD |
PM2XXX_INT3_ITCHCCWD | PM2XXX_INT3_ITCHCVWD)) {
dev_dbg(pm2->dev,
"Watchdog occured for precharge, CC and CV charge\n");
@@ -331,64 +332,65 @@ static int pm2_int_reg2(struct pm2xxx_charger *pm2)
return ret;
}
-static int pm2_int_reg3(struct pm2xxx_charger *pm2)
+static int pm2_int_reg3(void *pm2_data, int val)
{
+ struct pm2xxx_charger *pm2 = pm2_data;
int ret = 0;
- if (pm2->pm2_int[3] & (PM2XXX_INT4_ITCHARGINGON)) {
+ if (val & (PM2XXX_INT4_ITCHARGINGON)) {
dev_dbg(pm2->dev ,
"chargind operation has started\n");
}
- if (pm2->pm2_int[3] & (PM2XXX_INT4_ITVRESUME)) {
+ if (val & (PM2XXX_INT4_ITVRESUME)) {
dev_dbg(pm2->dev,
"battery discharged down to VResume threshold\n");
}
- if (pm2->pm2_int[3] & (PM2XXX_INT4_ITBATTFULL)) {
+ if (val & (PM2XXX_INT4_ITBATTFULL)) {
dev_dbg(pm2->dev , "battery fully detected\n");
}
- if (pm2->pm2_int[3] & (PM2XXX_INT4_ITCVPHASE)) {
+ if (val & (PM2XXX_INT4_ITCVPHASE)) {
dev_dbg(pm2->dev, "CV phase enter with 0.5C charging\n");
}
- if (pm2->pm2_int[3] &
- (PM2XXX_INT4_ITVPWR2OVV | PM2XXX_INT4_ITVPWR1OVV)) {
+ if (val & (PM2XXX_INT4_ITVPWR2OVV | PM2XXX_INT4_ITVPWR1OVV)) {
pm2->failure_case = VPWR_OVV;
- ret = pm2xxx_charger_ovv_mngt(pm2, pm2->pm2_int[3] &
+ ret = pm2xxx_charger_ovv_mngt(pm2, val &
(PM2XXX_INT4_ITVPWR2OVV | PM2XXX_INT4_ITVPWR1OVV));
dev_dbg(pm2->dev, "VPWR/VSYSTEM overvoltage detected\n");
}
- if (pm2->pm2_int[3] & (PM2XXX_INT4_S_ITBATTEMPCOLD |
+ if (val & (PM2XXX_INT4_S_ITBATTEMPCOLD |
PM2XXX_INT4_S_ITBATTEMPHOT)) {
- ret = pm2xxx_charger_batt_therm_mngt(pm2,
- pm2->pm2_int[3] & (PM2XXX_INT4_S_ITBATTEMPCOLD |
- PM2XXX_INT4_S_ITBATTEMPHOT));
+ ret = pm2xxx_charger_batt_therm_mngt(pm2, val &
+ (PM2XXX_INT4_S_ITBATTEMPCOLD |
+ PM2XXX_INT4_S_ITBATTEMPHOT));
dev_dbg(pm2->dev, "BTEMP is too Low/High\n");
}
return ret;
}
-static int pm2_int_reg4(struct pm2xxx_charger *pm2)
+static int pm2_int_reg4(void *pm2_data, int val)
{
+ struct pm2xxx_charger *pm2 = pm2_data;
int ret = 0;
- if (pm2->pm2_int[4] & PM2XXX_INT5_ITVSYSTEMOVV) {
+ if (val & PM2XXX_INT5_ITVSYSTEMOVV) {
pm2->failure_case = VSYSTEM_OVV;
- ret = pm2xxx_charger_ovv_mngt(pm2, pm2->pm2_int[4] &
+ ret = pm2xxx_charger_ovv_mngt(pm2, val &
PM2XXX_INT5_ITVSYSTEMOVV);
dev_dbg(pm2->dev, "VSYSTEM overvoltage detected\n");
}
- if (pm2->pm2_int[4] & (PM2XXX_INT5_ITTHERMALWARNINGFALL |
+ if (val & (PM2XXX_INT5_ITTHERMALWARNINGFALL |
PM2XXX_INT5_ITTHERMALWARNINGRISE |
PM2XXX_INT5_ITTHERMALSHUTDOWNFALL |
PM2XXX_INT5_ITTHERMALSHUTDOWNRISE)) {
dev_dbg(pm2->dev, "BTEMP die temperature is too Low/High\n");
- ret = pm2xxx_charger_die_therm_mngt(pm2, pm2->pm2_int[4] &
+ ret = pm2xxx_charger_die_therm_mngt(pm2, val &
(PM2XXX_INT5_ITTHERMALWARNINGFALL |
PM2XXX_INT5_ITTHERMALWARNINGRISE |
PM2XXX_INT5_ITTHERMALSHUTDOWNFALL |
@@ -398,40 +400,40 @@ static int pm2_int_reg4(struct pm2xxx_charger *pm2)
return ret;
}
-static int pm2_int_reg5(struct pm2xxx_charger *pm2)
+static int pm2_int_reg5(void *pm2_data, int val)
{
+ struct pm2xxx_charger *pm2 = pm2_data;
+ int ret = 0;
+
- if (pm2->pm2_int[5]
- & (PM2XXX_INT6_ITVPWR2DROP | PM2XXX_INT6_ITVPWR1DROP)) {
+ if (val & (PM2XXX_INT6_ITVPWR2DROP | PM2XXX_INT6_ITVPWR1DROP)) {
dev_dbg(pm2->dev, "VMPWR drop to VBAT level\n");
}
- if (pm2->pm2_int[5] & (PM2XXX_INT6_ITVPWR2VALIDRISE |
- PM2XXX_INT6_ITVPWR1VALIDRISE |
- PM2XXX_INT6_ITVPWR2VALIDFALL |
- PM2XXX_INT6_ITVPWR1VALIDFALL)) {
+ if (val & (PM2XXX_INT6_ITVPWR2VALIDRISE |
+ PM2XXX_INT6_ITVPWR1VALIDRISE |
+ PM2XXX_INT6_ITVPWR2VALIDFALL |
+ PM2XXX_INT6_ITVPWR1VALIDFALL)) {
dev_dbg(pm2->dev, "Falling/Rising edge on WPWR1/2\n");
}
- return 0;
+ return ret;
}
static irqreturn_t pm2xxx_irq_int(int irq, void *data)
{
struct pm2xxx_charger *pm2 = data;
- int ret, i;
+ struct pm2xxx_interrupts *interrupt = pm2->pm2_int;
+ int i;
- for (i = 0; i < ARRAY_SIZE(pm2->pm2_int); i++) {
- ret = pm2xxx_reg_read(pm2, pm2xxx_interrupt_registers[i],
- &(pm2->pm2_int[i]));
- }
+ for (i = 0; i < PM2XXX_NUM_INT_REG; i++) {
+ pm2xxx_reg_read(pm2,
+ pm2xxx_interrupt_registers[i],
+ &(interrupt->reg[i]));
- pm2_int_reg0(pm2);
- pm2_int_reg1(pm2);
- pm2_int_reg2(pm2);
- pm2_int_reg3(pm2);
- pm2_int_reg4(pm2);
- pm2_int_reg5(pm2);
+ if (interrupt->reg[i] > 0)
+ interrupt->handler[i](pm2, interrupt->reg[i]);
+ }
return IRQ_HANDLED;
}
@@ -538,7 +540,7 @@ static int pm2xxx_charger_update_charger_current(struct ux500_charger *charger,
curr_index = pm2xxx_current_to_regval(ich_out);
if (curr_index < 0) {
dev_err(pm2->dev,
- "Charger current too high: charging not started\n");
+ "Charger current too high, charging not started\n");
return -ENXIO;
}
@@ -614,6 +616,59 @@ static int pm2xxx_charging_init(struct pm2xxx_charger *pm2)
ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG4,
PM2XXX_CH_WD_PRECH_PHASE_60MIN);
+ /* Disable auto timeout */
+ ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG5,
+ PM2XXX_CH_WD_AUTO_TIMEOUT_20MIN);
+
+ /*
+ * EOC current level = 100mA
+ * Precharge current level = 100mA
+ * CC current level = 1000mA
+ */
+ ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG6,
+ (PM2XXX_DIR_CH_CC_CURRENT_1000MA |
+ PM2XXX_CH_PRECH_CURRENT_100MA |
+ PM2XXX_CH_EOC_CURRENT_100MA));
+
+ /*
+ * recharge threshold = 3.8V
+ * Precharge to CC threshold = 2.9V
+ */
+ ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG7,
+ (PM2XXX_CH_PRECH_VOL_2_9 | PM2XXX_CH_VRESUME_VOL_3_8));
+
+ /* float voltage charger level = 4.2V */
+ ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG8,
+ PM2XXX_CH_VOLT_4_2);
+
+ /* Voltage drop between VBAT and VSYS in HW charging = 300mV */
+ ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG9,
+ (PM2XXX_CH_150MV_DROP_300MV | PM2XXX_CHARCHING_INFO_DIS |
+ PM2XXX_CH_CC_REDUCED_CURRENT_IDENT |
+ PM2XXX_CH_CC_MODEDROP_DIS));
+
+ /* Input charger level of over voltage = 10V */
+ ret = pm2xxx_reg_write(pm2, PM2XXX_INP_VOLT_VPWR2,
+ PM2XXX_VPWR2_OVV_10);
+ ret = pm2xxx_reg_write(pm2, PM2XXX_INP_VOLT_VPWR1,
+ PM2XXX_VPWR1_OVV_10);
+
+ /* Input charger drop */
+ ret = pm2xxx_reg_write(pm2, PM2XXX_INP_DROP_VPWR2,
+ (PM2XXX_VPWR2_HW_OPT_DIS | PM2XXX_VPWR2_VALID_DIS |
+ PM2XXX_VPWR2_DROP_DIS));
+ ret = pm2xxx_reg_write(pm2, PM2XXX_INP_DROP_VPWR1,
+ (PM2XXX_VPWR1_HW_OPT_DIS | PM2XXX_VPWR1_VALID_DIS |
+ PM2XXX_VPWR1_DROP_DIS));
+
+ /* Disable battery low monitoring */
+ ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_LOW_LEV_COMP_REG,
+ PM2XXX_VBAT_LOW_MONITORING_DIS);
+
+ /* Disable LED */
+ ret = pm2xxx_reg_write(pm2, PM2XXX_LED_CTRL_REG,
+ PM2XXX_LED_SELECT_DIS);
+
return ret;
}
@@ -764,6 +819,15 @@ static void pm2xxx_charger_check_main_thermal_prot_work(
{
};
+static struct pm2xxx_interrupts pm2xxx_int = {
+ .handler[0] = pm2_int_reg0,
+ .handler[1] = pm2_int_reg1,
+ .handler[2] = pm2_int_reg2,
+ .handler[3] = pm2_int_reg3,
+ .handler[4] = pm2_int_reg4,
+ .handler[5] = pm2_int_reg5,
+};
+
static struct pm2xxx_irq pm2xxx_charger_irq[] = {
{"PM2XXX_IRQ_INT", pm2xxx_irq_int},
};
@@ -797,6 +861,8 @@ static int __devinit pm2xxx_wall_charger_probe(struct i2c_client *i2c_client,
pm2->dev = &i2c_client->dev;
pm2->gpadc = ab8500_gpadc_get();
+ pm2->pm2_int = &pm2xxx_int;
+
/* get charger spcific platform data */
if (!pl_data->wall_charger) {
dev_err(pm2->dev, "no charger platform data supplied\n");
@@ -844,6 +910,7 @@ static int __devinit pm2xxx_wall_charger_probe(struct i2c_client *i2c_client,
ARRAY_SIZE(pm2xxx_charger_voltage_map) - 1];
pm2->ac_chg.max_out_curr = pm2xxx_charger_current_map[
ARRAY_SIZE(pm2xxx_charger_current_map) - 1];
+ pm2->ac_chg.enabled = true;
/* Create a work queue for the charger */
pm2->charger_wq =
diff --git a/drivers/power/pm2301_charger.h b/drivers/power/pm2301_charger.h
index 27bf931..cc401d7 100644
--- a/drivers/power/pm2301_charger.h
+++ b/drivers/power/pm2301_charger.h
@@ -34,6 +34,8 @@
#define WD_TIMER 0x30 /* 4min */
#define WD_KICK_INTERVAL (60 * HZ)
+#define PM2XXX_NUM_INT_REG 0x6
+
/* Constant voltage/current */
#define PM2XXX_CONST_CURR 0x0
#define PM2XXX_CONST_VOLT 0x1
@@ -237,12 +239,32 @@
#define PM2XXX_VPWR2_OVV_10 0x2
#define PM2XXX_VPWR2_OVV_NONE 0x3
+/* Input charger drop VPWR2 */
+#define PM2XXX_VPWR2_HW_OPT_EN (0x1<<4)
+#define PM2XXX_VPWR2_HW_OPT_DIS (0x0<<4)
+
+#define PM2XXX_VPWR2_VALID_EN (0x1<<3)
+#define PM2XXX_VPWR2_VALID_DIS (0x0<<3)
+
+#define PM2XXX_VPWR2_DROP_EN (0x1<<2)
+#define PM2XXX_VPWR2_DROP_DIS (0x0<<2)
+
/* Input charger voltage VPWR1 */
#define PM2XXX_VPWR1_OVV_6_0 0x0
#define PM2XXX_VPWR1_OVV_6_3 0x1
#define PM2XXX_VPWR1_OVV_10 0x2
#define PM2XXX_VPWR1_OVV_NONE 0x3
+/* Input charger drop VPWR1 */
+#define PM2XXX_VPWR1_HW_OPT_EN (0x1<<4)
+#define PM2XXX_VPWR1_HW_OPT_DIS (0x0<<4)
+
+#define PM2XXX_VPWR1_VALID_EN (0x1<<3)
+#define PM2XXX_VPWR1_VALID_DIS (0x0<<3)
+
+#define PM2XXX_VPWR1_DROP_EN (0x1<<2)
+#define PM2XXX_VPWR1_DROP_DIS (0x0<<2)
+
/* Battery low level comparator control register */
#define PM2XXX_VBAT_LOW_MONITORING_DIS 0x0
#define PM2XXX_VBAT_LOW_MONITORING_ENA 0x1
@@ -446,6 +468,11 @@ struct pm2xxx_charger_event_flags {
bool chgwdexp;
};
+struct pm2xxx_interrupts {
+ u8 reg[PM2XXX_NUM_INT_REG];
+ int (*handler[PM2XXX_NUM_INT_REG])(void *, int);
+};
+
struct pm2xxx_config {
struct i2c_client *pm2xxx_i2c;
struct i2c_device_id *pm2xxx_id;
@@ -467,7 +494,7 @@ struct pm2xxx_charger {
int old_vbat;
int failure_case;
int failure_input_ovv;
- u8 pm2_int[6];
+ struct pm2xxx_interrupts *pm2_int;
struct ab8500_gpadc *gpadc;
struct regulator *regu;
struct pm2xxx_bm_data *bat;
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/