Re: [PATCH v3 4/8] MFD: ti_am335x_tscadc: add device tree bindinginformation

[Lars-Peter Clausen]

Hi,

On 01/18/2013 11:48 AM, Patil, Rachna wrote:
> From: "Patil, Rachna" <rachna@xxxxxx>
> 
> Signed-off-by: Patil, Rachna <rachna@xxxxxx>
> ---
>  .../devicetree/bindings/mfd/ti_am335x_tscadc.txt   |   35 ++++++++++++++++++++
>  1 file changed, 35 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mfd/ti_am335x_tscadc.txt
> 
> diff --git a/Documentation/devicetree/bindings/mfd/ti_am335x_tscadc.txt b/Documentation/devicetree/bindings/mfd/ti_am335x_tscadc.txt
> new file mode 100644
> index 0000000..c13c492
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/ti_am335x_tscadc.txt
> @@ -0,0 +1,35 @@
> +Texas Instruments - TSC / ADC multi-functional device
> +
> +ti_tscadc is a multi-function device with touchscreen and ADC on chip.
> +This document describes the binding for mfd device.
> +
> +Required properties:
> +- compatible: "ti,ti-tscadc"
> +- reg: Specifies the address of MFD block
> +- interrupts: IRQ line connected to the main SoC
> +- interrupt-parent: The parent interrupt controller

The subnodes and their properties also need documentation.

> +
> +Optional properties:
> +- ti,hwmods: Hardware information related to TSC/ADC MFD device
> +
> +Example:
> +
> +	tscadc: tscadc@44e0d000 {
> +		compatible = "ti,ti-tscadc";
> +		reg = <0x44e0d000 0x1000>;
> +
> +		interrupt-parent = <&intc>;
> +		interrupts = <16>;
> +		ti,hwmods = "adc_tsc";
> +
> +		tsc {
> +			wires = <4>;
> +			x-plate-resistance = <200>;
> +			steps-to-configure = <5>;
> +			wire-config = <0x00 0x11 0x22 0x33>;

Non-standard properties should have a vendor prefix.

> +		};
> +
> +		adc {
> +			adc-channels = <4>;
> +		};
> +	};

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/