[PATCH 0/4] i2c-designware: add Intel Lynxpoint support

[Mika Westerberg]

Hi all,

This series adds support for the Intel Lynxpoint Low Power Subsystem I2C
controllers. They are compatible with the DesignWare I2C controller.

Patches [1/4] and [2/4] are fixes that are necessary to get the driver
working on Lynxpoint.

Patch [3/4] brings minimal runtime PM support for the designware platform
driver. This is useful if the PM subsystem/domain implements runtime PM,
like in case of ACPI.

Patch [4/4] finally implements ACPI enumeration support for the designware
platform driver and adds Lynxpoint ACPI IDs.

Please review.

Mika Westerberg (4):
  i2c-designware: add missing MODULE_LICENSE
  i2c-designware: always set the STOP bit after last byte
  i2c-designware: add minimal support for runtime PM
  i2c-designware: add support for Intel Lynxpoint

 drivers/i2c/busses/i2c-designware-core.c    |   20 ++++++++-
 drivers/i2c/busses/i2c-designware-platdrv.c |   59 +++++++++++++++++++++++++--
 2 files changed, 74 insertions(+), 5 deletions(-)

-- 
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/