Re: [PATCH 1/2] pinctrl: tegra: add support for rcv-sel and drivetype

[Laxman Dewangan]

On Thursday 17 January 2013 02:00 PM, Linus Walleij wrote:
> On Sat, Jan 5, 2013 at 1:02 PM, Laxman Dewangan <ldewangan@xxxxxxxxxx> wrote:
>
> > From: Pritesh Raithatha <praithatha@xxxxxxxxxx>
> >
> > NVIDIA's Tegra114 added two more configuration parameter in pinmux i.e.
> > rcv-sel and drive type.
> >
> > rcv-sel: Select between High and Normal VIL/VIH receivers.
> >          RCVR_SEL=1: High VIL/VIH
> >          RCVR_SEL=0: Normal VIL/VIH
> >
> > drv_type: Ouptput drive type:
> >          33-50 ohm driver: 0x1
> >          66-100ohm driver: 0x0
> >
> > Add support of these parameters to be configure from DTS file.
> >
> > Tegra20 and Tegra30 does not support this configuration and hence initialize their
> > pinmux structure with reg = -1.
> >
> > Originally written by Pritesh Raithatha.
> > Changes by ldewangan:
> >          - remove drvtype_width as it is always 2.
> >          - Better describe the change.
> >
> > Signed-off-by: Pritesh Raithatha <praithatha@xxxxxxxxxx>
> > Signed-off-by: Laxman Dewangan <ldewangan@xxxxxxxxxx>
> Stephen, can you look at this patch?
>
> Authors: you need Stephen's ACK on this.


Stephen have already given his reviewed by on thi series and I posted V2 
version of taking care his comment.
Stephen's comment was in
Re: [PATCH 2/2] pinctrl: tegra114: add pinctrl driver for NVIDIA's 
Tegra114 SoC


Can you please review the v2 version of this series?


Thanks,
Laxman
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/