Re: [Linaro-mm-sig] [PATCH 5/7] seqno-fence: Hardware dma-buf implementationof fencing (v4)
From: Maarten Lankhorst
Date: Wed Jan 16 2013 - 05:36:44 EST
Op 16-01-13 07:28, Inki Dae schreef:
> 2013/1/15 Maarten Lankhorst <m.b.lankhorst@xxxxxxxxx>:
>> This type of fence can be used with hardware synchronization for simple
>> hardware that can block execution until the condition
>> (dma_buf[offset] - value) >= 0 has been met.
>>
>> A software fallback still has to be provided in case the fence is used
>> with a device that doesn't support this mechanism. It is useful to expose
>> this for graphics cards that have an op to support this.
>>
>> Some cards like i915 can export those, but don't have an option to wait,
>> so they need the software fallback.
>>
>> I extended the original patch by Rob Clark.
>>
>> v1: Original
>> v2: Renamed from bikeshed to seqno, moved into dma-fence.c since
>> not much was left of the file. Lots of documentation added.
>> v3: Use fence_ops instead of custom callbacks. Moved to own file
>> to avoid circular dependency between dma-buf.h and fence.h
>> v4: Add spinlock pointer to seqno_fence_init
>>
>> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxx>
>> ---
>> Documentation/DocBook/device-drivers.tmpl | 1 +
>> drivers/base/fence.c | 38 +++++++++++
>> include/linux/seqno-fence.h | 105 ++++++++++++++++++++++++++++++
>> 3 files changed, 144 insertions(+)
>> create mode 100644 include/linux/seqno-fence.h
>>
>> diff --git a/Documentation/DocBook/device-drivers.tmpl b/Documentation/DocBook/device-drivers.tmpl
>> index 6f53fc0..ad14396 100644
>> --- a/Documentation/DocBook/device-drivers.tmpl
>> +++ b/Documentation/DocBook/device-drivers.tmpl
>> @@ -128,6 +128,7 @@ X!Edrivers/base/interface.c
>> !Edrivers/base/dma-buf.c
>> !Edrivers/base/fence.c
>> !Iinclude/linux/fence.h
>> +!Iinclude/linux/seqno-fence.h
>> !Edrivers/base/dma-coherent.c
>> !Edrivers/base/dma-mapping.c
>> </sect1>
>> diff --git a/drivers/base/fence.c b/drivers/base/fence.c
>> index 28e5ffd..1d3f29c 100644
>> --- a/drivers/base/fence.c
>> +++ b/drivers/base/fence.c
>> @@ -24,6 +24,7 @@
>> #include <linux/slab.h>
>> #include <linux/export.h>
>> #include <linux/fence.h>
>> +#include <linux/seqno-fence.h>
>>
>> atomic_t fence_context_counter = ATOMIC_INIT(0);
>> EXPORT_SYMBOL(fence_context_counter);
>> @@ -284,3 +285,40 @@ out:
>> return ret;
>> }
>> EXPORT_SYMBOL(fence_default_wait);
>> +
>> +static bool seqno_enable_signaling(struct fence *fence)
>> +{
>> + struct seqno_fence *seqno_fence = to_seqno_fence(fence);
>> + return seqno_fence->ops->enable_signaling(fence);
>> +}
>> +
>> +static bool seqno_signaled(struct fence *fence)
>> +{
>> + struct seqno_fence *seqno_fence = to_seqno_fence(fence);
>> + return seqno_fence->ops->signaled && seqno_fence->ops->signaled(fence);
>> +}
>> +
>> +static void seqno_release(struct fence *fence)
>> +{
>> + struct seqno_fence *f = to_seqno_fence(fence);
>> +
>> + dma_buf_put(f->sync_buf);
>> + if (f->ops->release)
>> + f->ops->release(fence);
>> + else
>> + kfree(f);
>> +}
>> +
>> +static long seqno_wait(struct fence *fence, bool intr, signed long timeout)
>> +{
>> + struct seqno_fence *f = to_seqno_fence(fence);
>> + return f->ops->wait(fence, intr, timeout);
>> +}
>> +
>> +const struct fence_ops seqno_fence_ops = {
>> + .enable_signaling = seqno_enable_signaling,
>> + .signaled = seqno_signaled,
>> + .wait = seqno_wait,
>> + .release = seqno_release
>> +};
>> +EXPORT_SYMBOL_GPL(seqno_fence_ops);
>> diff --git a/include/linux/seqno-fence.h b/include/linux/seqno-fence.h
>> new file mode 100644
>> index 0000000..603adc0
>> --- /dev/null
>> +++ b/include/linux/seqno-fence.h
>> @@ -0,0 +1,105 @@
>> +/*
>> + * seqno-fence, using a dma-buf to synchronize fencing
>> + *
>> + * Copyright (C) 2012 Texas Instruments
>> + * Copyright (C) 2012 Canonical Ltd
>> + * Authors:
>> + * Rob Clark <rob.clark@xxxxxxxxxx>
>> + * Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxx>
>> + *
>> + * This program is free software; you can redistribute it and/or modify it
>> + * under the terms of the GNU General Public License version 2 as published by
>> + * the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope that it will be useful, but WITHOUT
>> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
>> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
>> + * more details.
>> + *
>> + * You should have received a copy of the GNU General Public License along with
>> + * this program. If not, see <http://www.gnu.org/licenses/>.
>> + */
>> +
>> +#ifndef __LINUX_SEQNO_FENCE_H
>> +#define __LINUX_SEQNO_FENCE_H
>> +
>> +#include <linux/fence.h>
>> +#include <linux/dma-buf.h>
>> +
>> +struct seqno_fence {
>> + struct fence base;
>> +
>> + const struct fence_ops *ops;
>> + struct dma_buf *sync_buf;
>> + uint32_t seqno_ofs;
>> +};
> Hi maarten,
>
> I'm applying dma-fence v11 and seqno-fence v4 to exynos drm and have
> some proposals.
>
> The above seqno_fence structure has only one dmabuf. Shouldn't it have
> mutiple dmabufs? For example, in case of drm driver, when pageflip is
> requested, one framebuffer could have one more gem buffer for NV12M
> format. And this means that one more exported dmabufs should be
> sychronized with other devices. Below is simple structure for it,
The fence guards a single operation, as such I didn't feel like more than one
dma-buf was needed to guard it.
Have you considered simply attaching multiple fences instead? Each with their own dma-buf.
There has been some muttering about allowing multiple exclusive fences to be attached, for arm soc's.
But I'm also considering getting rid of the dma-buf member and add a function call to retrieve it, since
the sync dma-buf member should not be changing often, and it would zap 2 atomic ops on every fence,
but I want it replaced by something that's not 10x more complicated.
Maybe "int get_sync_dma_buf(fence, old_dma_buf, &new_dma_buf)" that will set new_dma_buf = NULL
if the old_dma_buf is unchanged, and return true + return a new reference to the sync dma_buf if it's not identical to old_dma_buf.
old_dma_buf can also be NULL or a dma_buf that belongs to a different fence->context entirely. It might be capable of
returning an error, in which case the fence would count as being signaled. This could reduce the need for separately checking
fence_is_signaled first.
I think this would allow caching the synchronization dma_buf in a similar way without each fence needing
to hold a reference to the dma_buf all the time, even for fences that are only used internally.
> struct seqno_fence_dmabuf {
> struct list_head list;
> int id;
> struct dmabuf *sync_buf;
> uint32_t seqno_ops;
> uint32_t seqno;
> };
>
> The member, id, could be used to identify which device sync_buf is
> going to be accessed by. In case of drm driver, one framebuffer could
> be accessed by one more devices, one is Display controller and another
> is HDMI controller. So id would have crtc number.
Why do you need this? the base fence already has a context member.
In fact I don't see why you need a linked list, at worst you'd need a static array since the amount of
dma-bufs should already be known during allocation time.
I would prefer to simply make reservation_object->fence_exclusive an array, since it would be easier to implement,
and there have been some calls that arm might need such a thing.
> And seqno_fence structure could be defined like below,
>
> struct seqno_fence {
> struct list_head sync_buf_list;
> struct fence base;
> const struct fence_ops *ops;
> };
>
> In addition, I have implemented fence-helper framework for sw sync as
> WIP and below is intefaces for it,
>
> struct fence_helper {
> struct list_head entries;
> struct reservation_ticket ticket;
> struct seqno_fence *sf;
> spinlock_t lock;
> void *priv;
> };
>
> int fence_helper_init(struct fence_helper *fh, void *priv, void
> (*remease)(struct fence *fence));
> - This function is called at driver open so process unique context
> would have a new seqno_fence instance. This function does just
> seqno_fence_init call, initialize entries list and set device specific
> fence release callback.
>
> bool fence_helper_check_sync_buf(struct fence_helper *fh, struct
> dma_buf *sync_buf, int id);
> - This function is called before dma is started and checks if same
> sync_bufs had already be committed to reservation_object,
> bo->fence_shared[n]. And id could be used to identy which device
> sync_buf is going to be accessed by.
>
> int fence_helper_add_sync_buf(struct fence_helper *fh, struct dma_buf
> *sync_buf, int id);
> - This function is called if fence_helper_check_sync_buf() is true and
> adds it seqno_fence's sync_buf_list wrapping sync_buf as
> seqno_fence_dma_buf structure. With this function call, one
> seqno_fence instance would have more sync_bufs. At this time, the
> reference count to this sync_buf is taken.
>
> void fence_helper_del_sync_buf(struct fence_helper *fh, int id);
> - This function is called if some operation is failed after
> fence_helper_add_sync_buf call to release relevant resources.
>
> int fence_helper_init_reservation_entry(struct fence_helper *fh,
> struct dma_buf *dmabuf, bool shared, int id);
> - This function is called after fence_helper_add_sync_buf call and
> calls reservation_entry_init function to set a reservation object of
> sync_buf to a new reservation_entry object. And then the new
> reservation_entry is added to fh->entries to track all sync_bufs this
> device is going to access.
>
> void fence_helper_fini_reservation_entry(struct fence_helper *fh, int id);
> - This function is called if some operation is failed after
> fence_helper_init_reservation_entry call to releae relevant resources.
>
> int fence_helper_ticket_reserve(struct fence_helper *fh, int id);
> - This function is called after fence_helper_init_reservation_entry
> call and calls ticket_reserve function to reserve a ticket(locked for
> each reservation entry in fh->entires)
>
> void fence_helper_ticket_commit(struct fence_helper *fh, int id);
> - This function is called after fence_helper_ticket_reserve() is
> called to commit this device's fence to all reservation_objects of
> each sync_buf. After that, once other devices try to access these
> buffers, they would be blocked and unlock each reservation entry in
> fh->entires.
>
> int fence_helper_wait(struct fence_helper *fh, struct dma_buf *dmabuf,
> bool intr);
> - This function is called before fence_helper_add_sync_buf() is called
> to wait for a signal from other devices.
>
> int fence_helper_signal(struct fence_helper *fh, int id);
> - This function is called by device's interrupt handler or somewhere
> when dma access to this buffer has been completed and calls
> fence_signal() with each fence registed to each reservation object in
> fh->entries to notify dma access completion to other deivces. At this
> time, other devices blocked would be waked up and forward their next
> step.
>
> For more detail, in addition, this function does the following,
> - delete each reservation entry in fh->entries.
> - release each seqno_fence_dmabuf object in seqno_fence's
> sync_buf_list and call dma_buf_put() to put the reference count to
> dmabuf.
>
>
> Now the fence-helper framework is just WIP yet so there may be my
> missing points. If you are ok, I'd like to post it as RFC.
Way too complicated..
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/