Re: [PATCH 1/2] thermal: sysfs: Add a new sysfs node emul_temp

[Zhang Rui]

Hi, Amit,

On Sun, 2013-01-06 at 16:08 -0800, Amit Daniel Kachhap wrote:
> This patch adds support to set the emulated temperature method in
> thermal zone (sensor). After setting this feature thermal zone must
> report this temperature and not the actual temperature. The actual
> implementation of this emulated temperature is based on sensor
> capability or platform specific. This is useful in debugging different
> temperature threshold and its associated cooling action. Writing 0 on
> this node should disable emulation.

Question:
will this bring hardware issue? Say, critical temperature reached while
in emulation mode?

As this is for debug purpose, I'd prefer to have a seperate Kconfig
option for this feature.

> Signed-off-by: Amit Daniel Kachhap <amit.daniel@xxxxxxxxxxx>
> ---
>  Documentation/thermal/sysfs-api.txt |   14 ++++++++++++++
>  drivers/thermal/thermal_sys.c       |   26 ++++++++++++++++++++++++++
>  include/linux/thermal.h             |    1 +
>  3 files changed, 41 insertions(+), 0 deletions(-)
> 
> diff --git a/Documentation/thermal/sysfs-api.txt b/Documentation/thermal/sysfs-api.txt
> index 88c0233..e8f2ee4 100644
> --- a/Documentation/thermal/sysfs-api.txt
> +++ b/Documentation/thermal/sysfs-api.txt
> @@ -55,6 +55,8 @@ temperature) and throttle appropriate devices.
>  	.get_trip_type: get the type of certain trip point.
>  	.get_trip_temp: get the temperature above which the certain trip point
>  			will be fired.
> +	.set_emul_temp: set the emulation temperature which helps in debugging
> +			different threshold temperature points.
>  
>  1.1.2 void thermal_zone_device_unregister(struct thermal_zone_device *tz)
>  
> @@ -153,6 +155,7 @@ Thermal zone device sys I/F, created once it's registered:
>      |---trip_point_[0-*]_temp:	Trip point temperature
>      |---trip_point_[0-*]_type:	Trip point type
>      |---trip_point_[0-*]_hyst:	Hysteresis value for this trip point
> +    |---emul_temp:		Emulated temperature set node
>  
>  Thermal cooling device sys I/F, created once it's registered:
>  /sys/class/thermal/cooling_device[0-*]:
> @@ -252,6 +255,17 @@ passive
>  	Valid values: 0 (disabled) or greater than 1000
>  	RW, Optional
>  
> +emul_temp
> +	Interface to set the emulated temperature method in thermal zone
> +	(sensor). After setting this feature thermal zone must report
> +	this temperature and not the actual temperature. The actual
> +	implementation of this emulated	temperature is platform specific.

can we have a pure software temperature emulation method?
say, the generic thermal layer caches the emulated temperature value,
and hook it in update_temperature()?
This is also useful for testing in polling mode, and it does not require
platform specific callback support. I mean thermal_ops->set_emul_temp is
optional, but thermal emulation is always available for all platforms.

thanks,
rui
> +	This is useful in debugging different temperature threshold and its
> +	associated cooling action. Writing 0 on this node should disable
> +	emulation.
> +	Unit: millidegree Celsius
> +	WO, Optional
> +
>  *****************************
>  * Cooling device attributes *
>  *****************************
> diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c
> index 8c8ce80..ecdfc7d 100644
> --- a/drivers/thermal/thermal_sys.c
> +++ b/drivers/thermal/thermal_sys.c
> @@ -700,11 +700,31 @@ policy_show(struct device *dev, struct device_attribute *devattr, char *buf)
>  	return sprintf(buf, "%s\n", tz->governor->name);
>  }
>  
> +static ssize_t
> +emul_temp_store(struct device *dev, struct device_attribute *attr,
> +		     const char *buf, size_t count)
> +{
> +	struct thermal_zone_device *tz = to_thermal_zone(dev);
> +	int ret;
> +	unsigned long temperature;
> +
> +	if (!tz->ops->set_emul_temp)
> +		return -EPERM;
> +
> +	if (kstrtoul(buf, 10, &temperature))
> +		return -EINVAL;
> +
> +	ret = tz->ops->set_emul_temp(tz, temperature);
> +
> +	return ret ? ret : count;
> +}
> +
>  static DEVICE_ATTR(type, 0444, type_show, NULL);
>  static DEVICE_ATTR(temp, 0444, temp_show, NULL);
>  static DEVICE_ATTR(mode, 0644, mode_show, mode_store);
>  static DEVICE_ATTR(passive, S_IRUGO | S_IWUSR, passive_show, passive_store);
>  static DEVICE_ATTR(policy, S_IRUGO | S_IWUSR, policy_show, policy_store);
> +static DEVICE_ATTR(emul_temp, S_IWUSR, NULL, emul_temp_store);
>  
>  /* sys I/F for cooling device */
>  #define to_cooling_device(_dev)	\
> @@ -1592,6 +1612,12 @@ struct thermal_zone_device *thermal_zone_device_register(const char *type,
>  			goto unregister;
>  	}
>  
> +	if (ops->set_emul_temp) {
> +		result = device_create_file(&tz->device, &dev_attr_emul_temp);
> +		if (result)
> +			goto unregister;
> +	}
> +
>  	/* Create policy attribute */
>  	result = device_create_file(&tz->device, &dev_attr_policy);
>  	if (result)
> diff --git a/include/linux/thermal.h b/include/linux/thermal.h
> index 883bcda..fbb87d4 100644
> --- a/include/linux/thermal.h
> +++ b/include/linux/thermal.h
> @@ -123,6 +123,7 @@ struct thermal_zone_device_ops {
>  	int (*set_trip_hyst) (struct thermal_zone_device *, int,
>  			      unsigned long);
>  	int (*get_crit_temp) (struct thermal_zone_device *, unsigned long *);
> +	int (*set_emul_temp) (struct thermal_zone_device *, unsigned long);
>  	int (*get_trend) (struct thermal_zone_device *, int,
>  			  enum thermal_trend *);
>  	int (*notify) (struct thermal_zone_device *, int,


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/