WARNING: at x86/lib/debugobjects.c:908check_results.constprop.9+0x129/0x153()

From: Fengguang Wu
Date: Sun Jan 13 2013 - 21:31:08 EST

Next message: u3557: "Re: PTRACE_SYSCALL && vsyscall (Was: arch_check_bp_in_kernelspace:fix the range check)"
Previous message: Fangxiaozhi (Franko): "RE: [PATCH 2/2]linux-usb:optimize to match the Huawei USB storagedevices and support new switch command"
Next in thread: Thomas Gleixner: "Re: WARNING: at x86/lib/debugobjects.c:908check_results.constprop.9+0x129/0x153()"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hi Stephen,

I got this warning when testing kernels in kvm:

[ 0.000000] --------------------------------------------------------
[ 0.000000] 133 out of 218 testcases failed, as expected. |
[ 0.000000] ----------------------------------------------------
[ 0.000000] ODEBUG: 8 of 8 active objects replaced
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] WARNING: at /c/kernel-tests/src/x86/lib/debugobjects.c:908 check_results.constprop.9+0x129/0x153()
[ 0.000000] Hardware name: Bochs
[ 0.000000] ODEBUG: selftest warnings failed 4 != 5
[ 0.000000] Pid: 0, comm: swapper/0 Not tainted 3.2.0-06292-g59a5680 #1
[ 0.000000] Call Trace:
[ 0.000000] [<ffffffff810587ea>] warn_slowpath_common+0x7a/0xb0
[ 0.000000] [<ffffffff818ff01f>] ? check_results.constprop.9+0x35/0x153
[ 0.000000] [<ffffffff81058896>] warn_slowpath_fmt+0x46/0x50
[ 0.000000] [<ffffffff81435c81>] ? _raw_spin_lock_irqsave+0x61/0x70
[ 0.000000] [<ffffffff818ff01f>] ? check_results.constprop.9+0x35/0x153
[ 0.000000] [<ffffffff818ff113>] check_results.constprop.9+0x129/0x153
[ 0.000000] [<ffffffff818ff6d6>] debug_objects_mem_init+0x412/0x4a6
[ 0.000000] [<ffffffff818e0a15>] start_kernel+0x3c0/0x443
[ 0.000000] [<ffffffff818e0000>] ? __init_begin+0x14000/0x14000
[ 0.000000] [<ffffffff818e0156>] x86_64_start_reservations+0x131/0x135
[ 0.000000] [<ffffffff818e0259>] x86_64_start_kernel+0xff/0x10e
[ 0.000000] ---[ end trace 4eaa2a86a8e2da22 ]---
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3092.385 MHz processor.
[ 0.008004] Calibrating delay loop (skipped), value calculated using timer frequency.. 6184.77 BogoMIPS (lpj=12369540)

feac18dda25134005909e7770c77464e65608bd8 is the first bad commit

commit feac18dda25134005909e7770c77464e65608bd8
Author: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
Date: Mon Nov 7 19:48:26 2011 -0800

debugobjects: Be smarter about static objects

Make debugobjects use the return code from the fixup function. That
allows us better diagnostics in the activate check than relying on a
WARN_ON() in the object specific code.

[ tglx@xxxxxxxxxxxxx: Split out the debugobjects vs. the timer change ]

Signed-off-by: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
Cc: Christine Chan <cschan@xxxxxxxxxxxxxx>
Cc: John Stultz <john.stultz@xxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
Link: http://lkml.kernel.org/r/1320724108-20788-2-git-send-email-sboyd@xxxxxxxxxxxxxx
Signed-off-by: Thomas Gleixner <tglx@xxxxxxxxxxxxx>

Thanks,
Fengguang
[ 0.000000] Linux version 3.2.0-06292-g59a5680 (kbuild@bee) (gcc version 4.7.2 (Debian 4.7.2-4) ) #1 SMP Wed Jan 9 14:23:21 CST 2013
[ 0.000000] Command line: hung_task_panic=1 rcutree.rcu_cpu_stall_timeout=100 branch=char-misc/char-misc-next log_buf_len=8M ignore_loglevel debug sched_debug apic=debug dynamic_printk sysrq_always_enabled panic=10 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=vmlinuz-2013-01-09-14-23-33-char-misc:char-misc-next:627ca75-59a5680-x86_64-randconfig-x903-1-xbm BOOT_IMAGE=kernel-tests/kernels/x86_64-randconfig-x903/59a5680/vmlinuz-3.2.0-06292-g59a5680
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000000fffe000 (usable)
[ 0.000000] BIOS-e820: 000000000fffe000 - 0000000010000000 (reserved)
[ 0.000000] BIOS-e820: 00000000feffc000 - 00000000ff000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
[ 0.000000] debug: ignoring loglevel setting.
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: Bochs Bochs, BIOS Bochs 01/01/2007
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0xfffe max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 00E0000000 mask FFE0000000 uncachable
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x70406, new 0x7010600070106
[ 0.000000] Scan SMP from ffff880000000000 for 1024 bytes.
[ 0.000000] Scan SMP from ffff88000009fc00 for 1024 bytes.
[ 0.000000] Scan SMP from ffff8800000f0000 for 65536 bytes.
[ 0.000000] found SMP MP-table at [ffff8800000fdae0] fdae0
[ 0.000000] mpc: fdaf0-fdbe4
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009d000] 9d000 size 8192
[ 0.000000] init_memory_mapping: 0000000000000000-000000000fffe000
[ 0.000000] 0000000000 - 000fe00000 page 2M
[ 0.000000] 000fe00000 - 000fffe000 page 4k
[ 0.000000] kernel direct mapping tables up to fffe000 @ fffb000-fffe000
[ 0.000000] log_buf_len: 8388608
[ 0.000000] early log buf free: 127934(97%)
[ 0.000000] RAMDISK: 0e8d6000 - 0fff0000
[ 0.000000] ACPI: RSDP 00000000000fd950 00014 (v00 BOCHS )
[ 0.000000] ACPI: RSDT 000000000fffe550 00038 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: FACP 000000000fffff80 00074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001)
[ 0.000000] ACPI: DSDT 000000000fffe590 01121 (v01 BXPC BXDSDT 00000001 INTL 20100528)
[ 0.000000] ACPI: FACS 000000000fffff40 00040
[ 0.000000] ACPI: SSDT 000000000ffffe40 000FF (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: APIC 000000000ffffd50 00080 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001)
[ 0.000000] ACPI: HPET 000000000ffffd10 00038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001)
[ 0.000000] ACPI: SSDT 000000000ffff6c0 00644 (v01 BXPC BXSSDTPC 00000001 INTL 20100528)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] mapped APIC to ffffffffff5fa000 ( fee00000)
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0000fffe
[ 0.000000] On node 0 totalpages: 65421
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 2 pages reserved
[ 0.000000] DMA zone: 3917 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 960 pages used for memmap
[ 0.000000] DMA32 zone: 60478 pages, LIFO batch:15
[ 0.000000] ACPI: PM-Timer IO Port: 0xb008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] mapped APIC to ffffffffff5fa000 ( fee00000)
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 2, APIC INT 02
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 2, APIC INT 05
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 2, APIC INT 09
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 2, APIC INT 0a
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 2, APIC INT 0b
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 2, APIC INT 01
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 2, APIC INT 03
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 2, APIC INT 04
[ 0.000000] ACPI: IRQ5 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 2, APIC INT 06
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 2, APIC INT 07
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 2, APIC INT 08
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ10 used by override.
[ 0.000000] ACPI: IRQ11 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 2, APIC INT 0c
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 2, APIC INT 0d
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 2, APIC INT 0e
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 2, APIC INT 0f
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] mapped IOAPIC to ffffffffff5f9000 (fec00000)
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] Allocating PCI resources starting at 10000000 (gap: 10000000:eeffc000)
[ 0.000000] Booting paravirtualized kernel on KVM
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 25 pages/cpu @ffff88000de00000 s80888 r0 d21512 u1048576
[ 0.000000] pcpu-alloc: s80888 r0 d21512 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] KVM setup async PF for cpu 0
[ 0.000000] kvm-stealtime: cpu 0, msr de0df00
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64395
[ 0.000000] Kernel command line: hung_task_panic=1 rcutree.rcu_cpu_stall_timeout=100 branch=char-misc/char-misc-next log_buf_len=8M ignore_loglevel debug sched_debug apic=debug dynamic_printk sysrq_always_enabled panic=10 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=vmlinuz-2013-01-09-14-23-33-char-misc:char-misc-next:627ca75-59a5680-x86_64-randconfig-x903-1-xbm BOOT_IMAGE=kernel-tests/kernels/x86_64-randconfig-x903/59a5680/vmlinuz-3.2.0-06292-g59a5680
[ 0.000000] sysrq: sysrq always enabled.
[ 0.000000] PID hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 206908k/262136k available (4323k kernel code, 452k absent, 54776k reserved, 4679k data, 660k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000]
[ 0.000000]
[ 0.000000] NR_IRQS:4352 nr_irqs:512 16
[ 0.000000] console [ttyS0] enabled
[ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.000000] ... MAX_LOCK_DEPTH: 48
[ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
[ 0.000000] ... CLASSHASH_SIZE: 4096
[ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
[ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
[ 0.000000] ... CHAINHASH_SIZE: 16384
[ 0.000000] memory used by lock dependency info: 5823 kB
[ 0.000000] per task-struct memory footprint: 1920 bytes
[ 0.000000] ------------------------
[ 0.000000] | Locking API testsuite:
[ 0.000000] ----------------------------------------------------------------------------
[ 0.000000] | spin |wlock |rlock |mutex | wsem | rsem |
[ 0.000000] --------------------------------------------------------------------------
[ 0.000000] A-A deadlock:failed|failed| ok |failed|failed|failed|
[ 0.000000] A-B-B-A deadlock:failed|failed| ok |failed|failed|failed|
[ 0.000000] A-B-B-C-C-A deadlock:failed|failed| ok |failed|failed|failed|
[ 0.000000] A-B-C-A-B-C deadlock:failed|failed| ok |failed|failed|failed|
[ 0.000000] A-B-B-C-C-D-D-A deadlock:failed|failed| ok |failed|failed|failed|
[ 0.000000] A-B-C-D-B-D-D-A deadlock:failed|failed| ok |failed|failed|failed|
[ 0.000000] A-B-C-D-B-C-D-A deadlock:failed|failed| ok |failed|failed|failed|
[ 0.000000] double unlock: ok | ok | ok | ok | ok | ok |
[ 0.000000] initialize held: ok | ok | ok | ok | ok | ok |
[ 0.000000] bad unlock order: ok | ok | ok | ok | ok | ok |
[ 0.000000] --------------------------------------------------------------------------
[ 0.000000] recursive read-lock: | ok | |failed|
[ 0.000000] recursive read-lock #2: | ok | |failed|
[ 0.000000] mixed read-write-lock: |failed| |failed|
[ 0.000000] mixed write-read-lock: |failed| |failed|
[ 0.000000] --------------------------------------------------------------------------
[ 0.000000] hard-irqs-on + irq-safe-A/12:failed|failed| ok |
[ 0.000000] soft-irqs-on + irq-safe-A/12:failed|failed| ok |
[ 0.000000] hard-irqs-on + irq-safe-A/21:failed|failed| ok |
[ 0.000000] soft-irqs-on + irq-safe-A/21:failed|failed| ok |
[ 0.000000] sirq-safe-A => hirqs-on/12:failed|failed| ok |
[ 0.000000] sirq-safe-A => hirqs-on/21:failed|failed| ok |
[ 0.000000] hard-safe-A + irqs-on/12:failed|failed| ok |
[ 0.000000] soft-safe-A + irqs-on/12:failed|failed| ok |
[ 0.000000] hard-safe-A + irqs-on/21:failed|failed| ok |
[ 0.000000] soft-safe-A + irqs-on/21:failed|failed| ok |
[ 0.000000] hard-safe-A + unsafe-B #1/123:failed|failed| ok |
[ 0.000000] soft-safe-A + unsafe-B #1/123:failed|failed| ok |
[ 0.000000] hard-safe-A + unsafe-B #1/132:failed|failed| ok |
[ 0.000000] soft-safe-A + unsafe-B #1/132:failed|failed| ok |
[ 0.000000] hard-safe-A + unsafe-B #1/213:failed|failed| ok |
[ 0.000000] soft-safe-A + unsafe-B #1/213:failed|failed| ok |
[ 0.000000] hard-safe-A + unsafe-B #1/231:failed|failed| ok |
[ 0.000000] soft-safe-A + unsafe-B #1/231:failed|failed| ok |
[ 0.000000] hard-safe-A + unsafe-B #1/312:failed|failed| ok |
[ 0.000000] soft-safe-A + unsafe-B #1/312:failed|failed| ok |
[ 0.000000] hard-safe-A + unsafe-B #1/321:failed|failed| ok |
[ 0.000000] soft-safe-A + unsafe-B #1/321:failed|failed| ok |
[ 0.000000] hard-safe-A + unsafe-B #2/123:failed|failed| ok |
[ 0.000000] soft-safe-A + unsafe-B #2/123:failed|failed| ok |
[ 0.000000] hard-safe-A + unsafe-B #2/132:failed|failed| ok |
[ 0.000000] soft-safe-A + unsafe-B #2/132:failed|failed| ok |
[ 0.000000] hard-safe-A + unsafe-B #2/213:failed|failed| ok |
[ 0.000000] soft-safe-A + unsafe-B #2/213:failed|failed| ok |
[ 0.000000] hard-safe-A + unsafe-B #2/231:failed|failed| ok |
[ 0.000000] soft-safe-A + unsafe-B #2/231:failed|failed| ok |
[ 0.000000] hard-safe-A + unsafe-B #2/312:failed|failed| ok |
[ 0.000000] soft-safe-A + unsafe-B #2/312:failed|failed| ok |
[ 0.000000] hard-safe-A + unsafe-B #2/321:failed|failed| ok |
[ 0.000000] soft-safe-A + unsafe-B #2/321:failed|failed| ok |
[ 0.000000] hard-irq lock-inversion/123:failed|failed| ok |
[ 0.000000] soft-irq lock-inversion/123:failed|failed| ok |
[ 0.000000] hard-irq lock-inversion/132:failed|failed| ok |
[ 0.000000] soft-irq lock-inversion/132:failed|failed| ok |
[ 0.000000] hard-irq lock-inversion/213:failed|failed| ok |
[ 0.000000] soft-irq lock-inversion/213:failed|failed| ok |
[ 0.000000] hard-irq lock-inversion/231:failed|failed| ok |
[ 0.000000] soft-irq lock-inversion/231:failed|failed| ok |
[ 0.000000] hard-irq lock-inversion/312:failed|failed| ok |
[ 0.000000] soft-irq lock-inversion/312:failed|failed| ok |
[ 0.000000] hard-irq lock-inversion/321:failed|failed| ok |
[ 0.000000] soft-irq lock-inversion/321:failed|failed| ok |
[ 0.000000] hard-irq read-recursion/123: ok |
[ 0.000000] soft-irq read-recursion/123: ok |
[ 0.000000] hard-irq read-recursion/132: ok |
[ 0.000000] soft-irq read-recursion/132: ok |
[ 0.000000] hard-irq read-recursion/213: ok |
[ 0.000000] soft-irq read-recursion/213: ok |
[ 0.000000] hard-irq read-recursion/231: ok |
[ 0.000000] soft-irq read-recursion/231: ok |
[ 0.000000] hard-irq read-recursion/312: ok |
[ 0.000000] soft-irq read-recursion/312: ok |
[ 0.000000] hard-irq read-recursion/321: ok |
[ 0.000000] soft-irq read-recursion/321: ok |
[ 0.000000] --------------------------------------------------------
[ 0.000000] 133 out of 218 testcases failed, as expected. |
[ 0.000000] ----------------------------------------------------
[ 0.000000] ODEBUG: 8 of 8 active objects replaced
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] WARNING: at /c/kernel-tests/src/x86/lib/debugobjects.c:908 check_results.constprop.9+0x129/0x153()
[ 0.000000] Hardware name: Bochs
[ 0.000000] ODEBUG: selftest warnings failed 4 != 5
[ 0.000000] Pid: 0, comm: swapper/0 Not tainted 3.2.0-06292-g59a5680 #1
[ 0.000000] Call Trace:
[ 0.000000] [<ffffffff810587ea>] warn_slowpath_common+0x7a/0xb0
[ 0.000000] [<ffffffff818ff01f>] ? check_results.constprop.9+0x35/0x153
[ 0.000000] [<ffffffff81058896>] warn_slowpath_fmt+0x46/0x50
[ 0.000000] [<ffffffff81435c81>] ? _raw_spin_lock_irqsave+0x61/0x70
[ 0.000000] [<ffffffff818ff01f>] ? check_results.constprop.9+0x35/0x153
[ 0.000000] [<ffffffff818ff113>] check_results.constprop.9+0x129/0x153
[ 0.000000] [<ffffffff818ff6d6>] debug_objects_mem_init+0x412/0x4a6
[ 0.000000] [<ffffffff818e0a15>] start_kernel+0x3c0/0x443
[ 0.000000] [<ffffffff818e0000>] ? __init_begin+0x14000/0x14000
[ 0.000000] [<ffffffff818e0156>] x86_64_start_reservations+0x131/0x135
[ 0.000000] [<ffffffff818e0259>] x86_64_start_kernel+0xff/0x10e
[ 0.000000] ---[ end trace 4eaa2a86a8e2da22 ]---
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3092.385 MHz processor.
[ 0.008004] Calibrating delay loop (skipped), value calculated using timer frequency.. 6184.77 BogoMIPS (lpj=12369540)
[ 0.009979] pid_max: default: 4096 minimum: 301
[ 0.010941] Mount-cache hash table entries: 256
[ 0.012244] Initializing cgroup subsys devices
[ 0.013086] Initializing cgroup subsys freezer
[ 0.014016] mce: CPU supports 10 MCE banks
[ 0.019713] ACPI: Core revision 20110623
[ 0.021682] ftrace: allocating 14451 entries in 57 pages
[ 0.024213] Getting VERSION: 50014
[ 0.028017] Getting VERSION: 50014
[ 0.028655] Getting ID: 0
[ 0.029163] Getting ID: ff000000
[ 0.029766] Getting LVT0: 8700
[ 0.030342] Getting LVT1: 8400
[ 0.030995] enabled ExtINT on CPU#0
[ 0.033018] ENABLING IO-APIC IRQs
[ 0.033643] init IO_APIC IRQs
[ 0.034204] apic 2 pin 0 not connected
[ 0.034917] IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1)
[ 0.036033] IOAPIC[0]: Set routing entry (2-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1)
[ 0.037493] IOAPIC[0]: Set routing entry (2-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1)
[ 0.038936] IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1)
[ 0.040029] IOAPIC[0]: Set routing entry (2-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1)
[ 0.041471] IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1)
[ 0.042899] IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1)
[ 0.044029] IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1)
[ 0.045473] IOAPIC[0]: Set routing entry (2-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1)
[ 0.048030] IOAPIC[0]: Set routing entry (2-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1)
[ 0.049502] IOAPIC[0]: Set routing entry (2-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1)
[ 0.050972] IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1)
[ 0.052029] IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1)
[ 0.053500] IOAPIC[0]: Set routing entry (2-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1)
[ 0.054974] IOAPIC[0]: Set routing entry (2-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1)
[ 0.056025] apic 2 pin 16 not connected
[ 0.056747] apic 2 pin 17 not connected
[ 0.057467] apic 2 pin 18 not connected
[ 0.058183] apic 2 pin 19 not connected
[ 0.058894] apic 2 pin 20 not connected
[ 0.060007] apic 2 pin 21 not connected
[ 0.060730] apic 2 pin 22 not connected
[ 0.061454] apic 2 pin 23 not connected
[ 0.062316] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.064007] CPU0: Intel Common KVM processor stepping 01
[ 0.065302] Using local APIC timer interrupts.
[ 0.065303] calibrating APIC timer ...
[ 0.068003] ... lapic delta = 6249975
[ 0.068003] ... PM-Timer delta = 357952
[ 0.068003] ... PM-Timer result ok
[ 0.068003] ..... delta 6249975
[ 0.068003] ..... mult: 268417606
[ 0.068003] ..... calibration result: 3999984
[ 0.068003] ..... CPU clock speed is 3092.3766 MHz.
[ 0.068003] ..... host bus clock speed is 999.3984 MHz.
[ 0.068079] Performance Events: unsupported Netburst CPU model 6 no PMU driver, software events only.
[ 0.070616] lockdep: fixing up alternatives.
[ 0.071718] Booting Node 0, Processors #1 Ok.
[ 0.072224] smpboot cpu 1: start_ip = 9d000
[ 0.012000] masked ExtINT on CPU#1
[ 0.172063] KVM setup async PF for cpu 1
[ 0.172079] Brought up 2 CPUs
[ 0.172082] Total of 2 processors activated (12370.69 BogoMIPS).
[ 0.172383] kvm-stealtime: cpu 1, msr df0df00
[ 0.176155] devtmpfs: initialized
[ 0.176803] device: 'platform': device_add
[ 0.177554] PM: Adding info for No Bus:platform
[ 0.178397] bus: 'platform': registered
[ 0.179104] bus: 'cpu': registered
[ 0.179726] device: 'cpu': device_add
[ 0.180016] PM: Adding info for No Bus:cpu
[ 0.180946] atomic64 test passed for x86-64 platform with CX8 and with SSE
[ 0.182182] device class 'regulator': registering
[ 0.183090] Registering platform device 'reg-dummy'. Parent at platform
[ 0.184016] device: 'reg-dummy': device_add
[ 0.184785] bus: 'platform': add device reg-dummy
[ 0.185638] PM: Adding info for platform:reg-dummy
[ 0.186529] bus: 'platform': add driver reg-dummy
[ 0.188018] bus: 'platform': driver_probe_device: matched device reg-dummy with driver reg-dummy
[ 0.189570] bus: 'platform': really_probe: probing driver reg-dummy with device reg-dummy
[ 0.191032] device: 'regulator.0': device_add
[ 0.191829] PM: Adding info for No Bus:regulator.0
[ 0.192036] print_constraints: dummy:
[ 0.192731] driver: 'reg-dummy': driver_bound: bound to device 'reg-dummy'
[ 0.193961] bus: 'platform': really_probe: bound device reg-dummy to driver reg-dummy
[ 0.196115] NET: Registered protocol family 16
[ 0.196935] device class 'bdi': registering
[ 0.197714] device class 'pci_bus': registering
[ 0.198538] bus: 'pci': registered
[ 0.199163] device class 'lcd': registering
[ 0.200023] device class 'backlight': registering
[ 0.200883] device class 'tty': registering
[ 0.201687] bus: 'spi': registered
[ 0.202310] device class 'spi_master': registering
[ 0.203186] bus: 'i2c': registered
[ 0.203814] bus: 'i2c': add driver dummy
[ 0.204023] i2c-core: driver [dummy] registered
[ 0.204926] ACPI: bus type pci registered
[ 0.205666] device class 'dma': registering
[ 0.206448] device class 'dmi': registering
[ 0.207216] device: 'id': device_add
[ 0.208019] PM: Adding info for No Bus:id
[ 0.208765] dca service started, version 1.12.1
[ 0.209587] device class 'dca': registering
[ 0.210383] PCI: Using configuration type 1 for base access
[ 0.211381] device: 'cpu0': device_add
[ 0.212017] bus: 'cpu': add device cpu0
[ 0.212711] PM: Adding info for cpu:cpu0
[ 0.213445] device: 'cpu1': device_add
[ 0.214121] bus: 'cpu': add device cpu1
[ 0.214821] PM: Adding info for cpu:cpu1
[ 0.216163] device: 'default': device_add
[ 0.216905] PM: Adding info for No Bus:default
[ 0.217933] bus: 'i2c': add driver max7300
[ 0.218696] i2c-core: driver [max7300] registered
[ 0.219545] bus: 'i2c': add driver max732x
[ 0.220023] i2c-core: driver [max732x] registered
[ 0.220874] bus: 'spi': add driver mc33880
[ 0.221628] bus: 'i2c': add driver pcf857x
[ 0.222368] i2c-core: driver [pcf857x] registered
[ 0.223216] bus: 'i2c': add driver sx150x
[ 0.224023] i2c-core: driver [sx150x] registered
[ 0.224861] bus: 'platform': add driver tps65912-gpio
[ 0.225772] bus: 'platform': add driver wm831x-gpio
[ 0.226663] device class 'graphics': registering
[ 0.227505] bus: 'platform': add driver aat2870-backlight
[ 0.228038] ACPI: Added _OSI(Module Device)
[ 0.228792] ACPI: Added _OSI(Processor Device)
[ 0.229591] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.230438] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.233571] ACPI: EC: Look up EC in DSDT
[ 0.237804] ACPI: Interpreter enabled
[ 0.238483] ACPI: (supports S0 S5)
[ 0.239177] ACPI: Using IOAPIC for interrupt routing
[ 0.240031] bus: 'acpi': registered
[ 0.240672] bus: 'acpi': add driver power
[ 0.241425] device: 'LNXSYSTM:00': device_add
[ 0.242220] bus: 'acpi': add device LNXSYSTM:00
[ 0.243040] PM: Adding info for acpi:LNXSYSTM:00
[ 0.244038] device: 'device:00': device_add
[ 0.244807] bus: 'acpi': add device device:00
[ 0.245585] PM: Adding info for acpi:device:00
[ 0.246439] device: 'PNP0A03:00': device_add
[ 0.247220] bus: 'acpi': add device PNP0A03:00
[ 0.248019] PM: Adding info for acpi:PNP0A03:00
[ 0.249357] device: 'device:01': device_add
[ 0.250128] bus: 'acpi': add device device:01
[ 0.250913] PM: Adding info for acpi:device:01
[ 0.251802] device: 'device:02': device_add
[ 0.252020] bus: 'acpi': add device device:02
[ 0.252812] PM: Adding info for acpi:device:02
[ 0.253661] device: 'PNP0B00:00': device_add
[ 0.254446] bus: 'acpi': add device PNP0B00:00
[ 0.255246] PM: Adding info for acpi:PNP0B00:00
[ 0.256086] device: 'PNP0303:00': device_add
[ 0.256868] bus: 'acpi': add device PNP0303:00
[ 0.257672] PM: Adding info for acpi:PNP0303:00
[ 0.258553] device: 'PNP0F13:00': device_add
[ 0.259336] bus: 'acpi': add device PNP0F13:00
[ 0.260020] PM: Adding info for acpi:PNP0F13:00
[ 0.260897] device: 'PNP0700:00': device_add
[ 0.261673] bus: 'acpi': add device PNP0700:00
[ 0.262474] PM: Adding info for acpi:PNP0700:00
[ 0.264178] device: 'PNP0400:00': device_add
[ 0.264961] bus: 'acpi': add device PNP0400:00
[ 0.265759] PM: Adding info for acpi:PNP0400:00
[ 0.266708] device: 'PNP0501:00': device_add
[ 0.267483] bus: 'acpi': add device PNP0501:00
[ 0.268021] PM: Adding info for acpi:PNP0501:00
[ 0.268941] device: 'device:03': device_add
[ 0.269707] bus: 'acpi': add device device:03
[ 0.270487] PM: Adding info for acpi:device:03
[ 0.271343] device: 'device:04': device_add
[ 0.272021] bus: 'acpi': add device device:04
[ 0.272807] PM: Adding info for acpi:device:04
[ 0.273652] device: 'device:05': device_add
[ 0.274415] bus: 'acpi': add device device:05
[ 0.275191] PM: Adding info for acpi:device:05
[ 0.276074] device: 'device:06': device_add
[ 0.276839] bus: 'acpi': add device device:06
[ 0.277624] PM: Adding info for acpi:device:06
[ 0.278475] device: 'device:07': device_add
[ 0.279221] bus: 'acpi': add device device:07
[ 0.280021] PM: Adding info for acpi:device:07
[ 0.280875] device: 'device:08': device_add
[ 0.281642] bus: 'acpi': add device device:08
[ 0.282425] PM: Adding info for acpi:device:08
[ 0.283269] device: 'device:09': device_add
[ 0.284022] bus: 'acpi': add device device:09
[ 0.284808] PM: Adding info for acpi:device:09
[ 0.285665] device: 'device:0a': device_add
[ 0.286428] bus: 'acpi': add device device:0a
[ 0.287205] PM: Adding info for acpi:device:0a
[ 0.288077] device: 'device:0b': device_add
[ 0.288845] bus: 'acpi': add device device:0b
[ 0.289637] PM: Adding info for acpi:device:0b
[ 0.290525] device: 'device:0c': device_add
[ 0.291286] bus: 'acpi': add device device:0c
[ 0.292022] PM: Adding info for acpi:device:0c
[ 0.292880] device: 'device:0d': device_add
[ 0.293645] bus: 'acpi': add device device:0d
[ 0.294436] PM: Adding info for acpi:device:0d
[ 0.295291] device: 'device:0e': device_add
[ 0.296023] bus: 'acpi': add device device:0e
[ 0.296811] PM: Adding info for acpi:device:0e
[ 0.297666] device: 'device:0f': device_add
[ 0.298429] bus: 'acpi': add device device:0f
[ 0.299214] PM: Adding info for acpi:device:0f
[ 0.300076] device: 'device:10': device_add
[ 0.300844] bus: 'acpi': add device device:10
[ 0.301632] PM: Adding info for acpi:device:10
[ 0.302487] device: 'device:11': device_add
[ 0.303251] bus: 'acpi': add device device:11
[ 0.304022] PM: Adding info for acpi:device:11
[ 0.304877] device: 'device:12': device_add
[ 0.305640] bus: 'acpi': add device device:12
[ 0.306429] PM: Adding info for acpi:device:12
[ 0.307284] device: 'device:13': device_add
[ 0.308023] bus: 'acpi': add device device:13
[ 0.308849] PM: Adding info for acpi:device:13
[ 0.309708] device: 'device:14': device_add
[ 0.310472] bus: 'acpi': add device device:14
[ 0.311255] PM: Adding info for acpi:device:14
[ 0.312077] device: 'device:15': device_add
[ 0.312841] bus: 'acpi': add device device:15
[ 0.313628] PM: Adding info for acpi:device:15
[ 0.314481] device: 'device:16': device_add
[ 0.315241] bus: 'acpi': add device device:16
[ 0.316023] PM: Adding info for acpi:device:16
[ 0.316878] device: 'device:17': device_add
[ 0.317638] bus: 'acpi': add device device:17
[ 0.318422] PM: Adding info for acpi:device:17
[ 0.319270] device: 'device:18': device_add
[ 0.320024] bus: 'acpi': add device device:18
[ 0.320812] PM: Adding info for acpi:device:18
[ 0.321666] device: 'device:19': device_add
[ 0.322429] bus: 'acpi': add device device:19
[ 0.323213] PM: Adding info for acpi:device:19
[ 0.324077] device: 'device:1a': device_add
[ 0.324839] bus: 'acpi': add device device:1a
[ 0.325625] PM: Adding info for acpi:device:1a
[ 0.326479] device: 'device:1b': device_add
[ 0.327243] bus: 'acpi': add device device:1b
[ 0.328024] PM: Adding info for acpi:device:1b
[ 0.328922] device: 'device:1c': device_add
[ 0.329691] bus: 'acpi': add device device:1c
[ 0.330480] PM: Adding info for acpi:device:1c
[ 0.331332] device: 'device:1d': device_add
[ 0.332025] bus: 'acpi': add device device:1d
[ 0.332800] PM: Adding info for acpi:device:1d
[ 0.333656] device: 'device:1e': device_add
[ 0.334420] bus: 'acpi': add device device:1e
[ 0.335203] PM: Adding info for acpi:device:1e
[ 0.336078] device: 'device:1f': device_add
[ 0.336830] bus: 'acpi': add device device:1f
[ 0.337614] PM: Adding info for acpi:device:1f
[ 0.338467] device: 'device:20': device_add
[ 0.339228] bus: 'acpi': add device device:20
[ 0.340025] PM: Adding info for acpi:device:20
[ 0.340872] device: 'device:21': device_add
[ 0.341631] bus: 'acpi': add device device:21
[ 0.342414] PM: Adding info for acpi:device:21
[ 0.344031] device: 'device:22': device_add
[ 0.344796] bus: 'acpi': add device device:22
[ 0.345573] PM: Adding info for acpi:device:22
[ 0.346586] device: 'PNP0103:00': device_add
[ 0.347373] bus: 'acpi': add device PNP0103:00
[ 0.348025] PM: Adding info for acpi:PNP0103:00
[ 0.349026] device: 'PNP0C0F:00': device_add
[ 0.349806] bus: 'acpi': add device PNP0C0F:00
[ 0.350606] PM: Adding info for acpi:PNP0C0F:00
[ 0.351551] device: 'PNP0C0F:01': device_add
[ 0.352026] bus: 'acpi': add device PNP0C0F:01
[ 0.352834] PM: Adding info for acpi:PNP0C0F:01
[ 0.353785] device: 'PNP0C0F:02': device_add
[ 0.354560] bus: 'acpi': add device PNP0C0F:02
[ 0.355367] PM: Adding info for acpi:PNP0C0F:02
[ 0.356173] device: 'PNP0C0F:03': device_add
[ 0.356963] bus: 'acpi': add device PNP0C0F:03
[ 0.357763] PM: Adding info for acpi:PNP0C0F:03
[ 0.358715] device: 'PNP0C0F:04': device_add
[ 0.360027] bus: 'acpi': add device PNP0C0F:04
[ 0.360837] PM: Adding info for acpi:PNP0C0F:04
[ 0.361731] device: 'LNXCPU:00': device_add
[ 0.362489] bus: 'acpi': add device LNXCPU:00
[ 0.363276] PM: Adding info for acpi:LNXCPU:00
[ 0.364092] device: 'LNXCPU:01': device_add
[ 0.364860] bus: 'acpi': add device LNXCPU:01
[ 0.365647] PM: Adding info for acpi:LNXCPU:01
[ 0.366489] device: 'device:23': device_add
[ 0.367269] bus: 'acpi': add device device:23
[ 0.368027] PM: Adding info for acpi:device:23
[ 0.368896] device: 'LNXPWRBN:00': device_add
[ 0.369688] bus: 'acpi': add device LNXPWRBN:00
[ 0.370503] PM: Adding info for acpi:LNXPWRBN:00
[ 0.371648] bus: 'acpi': add driver ec
[ 0.372070] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.373778] bus: 'acpi': add driver pci_root
[ 0.374554] bus: 'acpi': driver_probe_device: matched device PNP0A03:00 with driver pci_root
[ 0.376029] bus: 'acpi': really_probe: probing driver pci_root with device PNP0A03:00
[ 0.377438] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.378572] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.380028] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.381360] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.382795] pci_root PNP0A03:00: host bridge window [mem 0xe0000000-0xfebfffff] (ignored)
[ 0.384027] PCI: root bus 00: using default resources
[ 0.384930] device: 'pci0000:00': device_add
[ 0.385710] PM: Adding info for No Bus:pci0000:00
[ 0.386560] device: '0000:00': device_add
[ 0.387289] PM: Adding info for No Bus:0000:00
[ 0.388043] PCI host bridge to bus 0000:00
[ 0.388783] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.389884] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffffff]
[ 0.391131] pci_bus 0000:00: scanning bus
[ 0.392106] pci 0000:00:00.0: [8086:1237] type 0 class 0x000600
[ 0.393168] pci 0000:00:00.0: calling quirk_mmio_always_on+0x0/0x17
[ 0.394659] pci 0000:00:00.0: calling quirk_resource_alignment+0x0/0x172
[ 0.396040] pci 0000:00:00.0: calling pci_fixup_transparent_bridge+0x0/0x26
[ 0.397422] pci 0000:00:01.0: [8086:7000] type 0 class 0x000601
[ 0.398494] pci 0000:00:01.0: calling quirk_mmio_always_on+0x0/0x17
[ 0.400642] pci 0000:00:01.0: calling quirk_resource_alignment+0x0/0x172
[ 0.401843] pci 0000:00:01.0: calling pci_fixup_transparent_bridge+0x0/0x26
[ 0.403208] pci 0000:00:01.1: [8086:7010] type 0 class 0x000101
[ 0.404046] pci 0000:00:01.1: calling quirk_mmio_always_on+0x0/0x17
[ 0.408346] pci 0000:00:01.1: reg 20: [io 0xc040-0xc04f]
[ 0.410563] pci 0000:00:01.1: calling quirk_resource_alignment+0x0/0x172
[ 0.411759] pci 0000:00:01.1: calling pci_fixup_transparent_bridge+0x0/0x26
[ 0.412183] pci 0000:00:01.3: [8086:7113] type 0 class 0x000680
[ 0.413261] pci 0000:00:01.3: calling quirk_mmio_always_on+0x0/0x17
[ 0.414381] pci 0000:00:01.3: calling acpi_pm_check_blacklist+0x0/0x38
[ 0.416662] pci 0000:00:01.3: calling quirk_piix4_acpi+0x0/0x154
[ 0.417753] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI
[ 0.419051] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB
[ 0.420100] pci 0000:00:01.3: calling quirk_resource_alignment+0x0/0x172
[ 0.421294] pci 0000:00:01.3: calling pci_fixup_transparent_bridge+0x0/0x26
[ 0.422528] pci 0000:00:01.3: calling pci_fixup_piix4_acpi+0x0/0x10
[ 0.424230] pci 0000:00:02.0: [1013:00b8] type 0 class 0x000300
[ 0.425310] pci 0000:00:02.0: calling quirk_mmio_always_on+0x0/0x17
[ 0.428721] pci 0000:00:02.0: reg 10: [mem 0xfc000000-0xfdffffff pref]
[ 0.432107] pci 0000:00:02.0: reg 14: [mem 0xfebf0000-0xfebf0fff]
[ 0.440078] pci 0000:00:02.0: reg 30: [mem 0xfebe0000-0xfebeffff pref]
[ 0.441379] pci 0000:00:02.0: calling quirk_resource_alignment+0x0/0x172
[ 0.442779] pci 0000:00:03.0: [8086:100e] type 0 class 0x000200
[ 0.444054] pci 0000:00:03.0: calling quirk_mmio_always_on+0x0/0x17
[ 0.446296] pci 0000:00:03.0: reg 10: [mem 0xfeba0000-0xfebbffff]
[ 0.448602] pci 0000:00:03.0: reg 14: [io 0xc000-0xc03f]
[ 0.455288] pci 0000:00:03.0: reg 30: [mem 0xfebc0000-0xfebdffff pref]
[ 0.456066] pci 0000:00:03.0: calling quirk_resource_alignment+0x0/0x172
[ 0.457261] pci 0000:00:03.0: calling pci_fixup_transparent_bridge+0x0/0x26
[ 0.458640] pci 0000:00:04.0: [8086:25ab] type 0 class 0x000880
[ 0.460050] pci 0000:00:04.0: calling quirk_mmio_always_on+0x0/0x17
[ 0.461771] pci 0000:00:04.0: reg 10: [mem 0xfebf1000-0xfebf100f]
[ 0.466398] pci 0000:00:04.0: calling quirk_resource_alignment+0x0/0x172
[ 0.467598] pci 0000:00:04.0: calling pci_fixup_transparent_bridge+0x0/0x26
[ 0.468484] pci_bus 0000:00: fixups for bus
[ 0.469246] pci_bus 0000:00: bus scan returning with max=00
[ 0.470241] pci_bus 0000:00: on NUMA node 0
[ 0.471053] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.472987] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x18)
[ 0.474340] device: '0000:00:00.0': device_add
[ 0.476669] bus: 'pci': add device 0000:00:00.0
[ 0.477494] PM: Adding info for pci:0000:00:00.0
[ 0.478393] device: '0000:00:01.0': device_add
[ 0.479764] bus: 'pci': add device 0000:00:01.0
[ 0.480039] PM: Adding info for pci:0000:00:01.0
[ 0.480878] device: '0000:00:01.1': device_add
[ 0.482248] bus: 'pci': add device 0000:00:01.1
[ 0.483075] PM: Adding info for pci:0000:00:01.1
[ 0.484043] device: '0000:00:01.3': device_add
[ 0.485411] bus: 'pci': add device 0000:00:01.3
[ 0.486230] PM: Adding info for pci:0000:00:01.3
[ 0.487065] device: '0000:00:02.0': device_add
[ 0.488597] bus: 'pci': add device 0000:00:02.0
[ 0.489428] PM: Adding info for pci:0000:00:02.0
[ 0.490272] device: '0000:00:03.0': device_add
[ 0.492143] bus: 'pci': add device 0000:00:03.0
[ 0.492969] PM: Adding info for pci:0000:00:03.0
[ 0.493808] device: '0000:00:04.0': device_add
[ 0.495163] bus: 'pci': add device 0000:00:04.0
[ 0.495988] PM: Adding info for pci:0000:00:04.0
[ 0.496051] driver: 'PNP0A03:00': driver_bound: bound to device 'pci_root'
[ 0.497273] bus: 'acpi': really_probe: bound device PNP0A03:00 to driver pci_root
[ 0.498650] bus: 'acpi': add driver pci_link
[ 0.500054] bus: 'acpi': driver_probe_device: matched device PNP0C0F:00 with driver pci_link
[ 0.501553] bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:00
[ 0.503034] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[ 0.504422] driver: 'PNP0C0F:00': driver_bound: bound to device 'pci_link'
[ 0.505652] bus: 'acpi': really_probe: bound device PNP0C0F:00 to driver pci_link
[ 0.506980] bus: 'acpi': driver_probe_device: matched device PNP0C0F:01 with driver pci_link
[ 0.508035] bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:01
[ 0.509483] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[ 0.510688] driver: 'PNP0C0F:01': driver_bound: bound to device 'pci_link'
[ 0.512036] bus: 'acpi': really_probe: bound device PNP0C0F:01 to driver pci_link
[ 0.513362] bus: 'acpi': driver_probe_device: matched device PNP0C0F:02 with driver pci_link
[ 0.514847] bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:02
[ 0.516098] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[ 0.517319] driver: 'PNP0C0F:02': driver_bound: bound to device 'pci_link'
[ 0.518543] bus: 'acpi': really_probe: bound device PNP0C0F:02 to driver pci_link
[ 0.520038] bus: 'acpi': driver_probe_device: matched device PNP0C0F:03 with driver pci_link
[ 0.521537] bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:03
[ 0.522979] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[ 0.524417] driver: 'PNP0C0F:03': driver_bound: bound to device 'pci_link'
[ 0.525648] bus: 'acpi': really_probe: bound device PNP0C0F:03 to driver pci_link
[ 0.526972] bus: 'acpi': driver_probe_device: matched device PNP0C0F:04 with driver pci_link
[ 0.528036] bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:04
[ 0.529487] ACPI: PCI Interrupt Link [LNKS] (IRQs 9) *0
[ 0.530594] driver: 'PNP0C0F:04': driver_bound: bound to device 'pci_link'
[ 0.532037] bus: 'acpi': really_probe: bound device PNP0C0F:04 to driver pci_link
[ 0.533414] bus: 'pnp': registered
[ 0.534046] bus: 'xen-backend': registered
[ 0.534806] bus: 'xen': registered
[ 0.535439] bus: 'platform': add driver reg-fixed-voltage
[ 0.536049] bus: 'platform': add driver gpio-regulator
[ 0.537000] bus: 'i2c': add driver ad5398
[ 0.537733] i2c-core: driver [ad5398] registered
[ 0.538565] bus: 'i2c': add driver max8649
[ 0.540042] i2c-core: driver [max8649] registered
[ 0.540893] bus: 'i2c': add driver max8660
[ 0.541628] i2c-core: driver [max8660] registered
[ 0.542475] bus: 'i2c': add driver max8952
[ 0.543219] i2c-core: driver [max8952] registered
[ 0.544039] bus: 'platform': add driver max8997-pmic
[ 0.544943] bus: 'platform': add driver wm831x-buckv
[ 0.545842] bus: 'platform': add driver wm831x-buckp
[ 0.546741] bus: 'platform': add driver wm831x-boostp
[ 0.547655] bus: 'platform': add driver wm831x-epe
[ 0.548044] bus: 'platform': add driver wm831x-isink
[ 0.548944] bus: 'platform': add driver wm831x-ldo
[ 0.549818] bus: 'platform': add driver wm831x-aldo
[ 0.550705] bus: 'platform': add driver wm831x-alive-ldo
[ 0.552045] bus: 'platform': add driver wm8400-regulator
[ 0.553005] bus: 'platform': add driver wm8994-ldo
[ 0.553876] bus: 'platform': add driver mc13783-regulator
[ 0.554861] bus: 'platform': add driver mc13892-regulator
[ 0.556049] bus: 'i2c': add driver tps65023
[ 0.556813] i2c-core: driver [tps65023] registered
[ 0.557673] bus: 'i2c': add driver isl6271a
[ 0.558430] i2c-core: driver [isl6271a] registered
[ 0.559296] device class 'misc': registering
[ 0.560067] bus: 'i2c': add driver 88PM860x
[ 0.560831] i2c-core: driver [88PM860x] registered
[ 0.561696] bus: 'i2c': add driver tc3589x
[ 0.562428] i2c-core: driver [tc3589x] registered
[ 0.563275] bus: 'i2c': add driver WM8400
[ 0.564044] i2c-core: driver [WM8400] registered
[ 0.564886] bus: 'i2c': add driver wm831x
[ 0.565611] i2c-core: driver [wm831x] registered
[ 0.566450] bus: 'i2c': add driver tps6105x
[ 0.567208] i2c-core: driver [tps6105x] registered
[ 0.568040] tps65010: version 2 May 2005
[ 0.568752] bus: 'i2c': add driver tps65010
[ 0.569507] i2c-core: driver [tps65010] registered
[ 0.570390] bus: 'i2c': remove driver tps65010
[ 0.571196] driver: 'tps65010': driver_release
[ 0.572039] i2c-core: driver [tps65010] unregistered
[ 0.588064] bus: 'i2c': add driver tps65010
[ 0.588842] i2c-core: driver [tps65010] registered
[ 0.589694] bus: 'i2c': remove driver tps65010
[ 0.590501] driver: 'tps65010': driver_release
[ 0.591303] i2c-core: driver [tps65010] unregistered
[ 0.608048] bus: 'i2c': add driver tps65010
[ 0.608820] i2c-core: driver [tps65010] registered
[ 0.609676] bus: 'i2c': remove driver tps65010
[ 0.610482] driver: 'tps65010': driver_release
[ 0.611289] i2c-core: driver [tps65010] unregistered
[ 0.612041] tps65010: no chip?
[ 0.612609] bus: 'i2c': add driver tps6507x
[ 0.613365] i2c-core: driver [tps6507x] registered
[ 0.614232] bus: 'i2c': add driver tps65910
[ 0.614996] i2c-core: driver [tps65910] registered
[ 0.616043] bus: 'i2c': add driver tps65912
[ 0.616810] i2c-core: driver [tps65912] registered
[ 0.617675] bus: 'spi': add driver mc13xxx
[ 0.618428] bus: 'i2c': add driver da9052
[ 0.619159] i2c-core: driver [da9052] registered
[ 0.619999] bus: 'i2c': add driver max8925
[ 0.620054] i2c-core: driver [max8925] registered
[ 0.620900] bus: 'i2c': add driver max8997
[ 0.621650] i2c-core: driver [max8997] registered
[ 0.622500] bus: 'i2c': add driver tps6586x
[ 0.623275] i2c-core: driver [tps6586x] registered
[ 0.624044] bus: 'i2c': add driver aat2870
[ 0.624787] i2c-core: driver [aat2870] using legacy suspend method
[ 0.625882] i2c-core: driver [aat2870] using legacy resume method
[ 0.626967] i2c-core: driver [aat2870] registered
[ 0.628048] device class 'udc': registering
[ 0.628846] bus: 'serio': registered
[ 0.629516] bus: 'gameport': registered
[ 0.630217] device class 'input': registering
[ 0.631007] bus: 'platform': add driver i2c-gpio
[ 0.632050] device class 'power_supply': registering
[ 0.632953] device class 'hwmon': registering
[ 0.633749] device class 'leds': registering
[ 0.634537] device class 'devfreq': registering
[ 0.635368] PCI: Using ACPI for IRQ routing
[ 0.636049] PCI: pci_cache_line_size set to 64 bytes
[ 0.636997] pci 0000:00:01.1: BAR 0: reserving [io 0x01f0-0x01f7 flags 0x110] (d=0, p=0)
[ 0.638460] pci 0000:00:01.1: BAR 1: reserving [io 0x03f6 flags 0x110] (d=0, p=0)
[ 0.640045] pci 0000:00:01.1: BAR 2: reserving [io 0x0170-0x0177 flags 0x110] (d=0, p=0)
[ 0.641494] pci 0000:00:01.1: BAR 3: reserving [io 0x0376 flags 0x110] (d=0, p=0)
[ 0.642828] pci 0000:00:01.1: BAR 4: reserving [io 0xc040-0xc04f flags 0x40101] (d=0, p=0)
[ 0.644078] pci 0000:00:02.0: BAR 0: reserving [mem 0xfc000000-0xfdffffff flags 0x42208] (d=0, p=0)
[ 0.645680] pci 0000:00:02.0: BAR 1: reserving [mem 0xfebf0000-0xfebf0fff flags 0x40200] (d=0, p=0)
[ 0.647293] pci 0000:00:03.0: BAR 0: reserving [mem 0xfeba0000-0xfebbffff flags 0x40200] (d=0, p=0)
[ 0.648045] pci 0000:00:03.0: BAR 1: reserving [io 0xc000-0xc03f flags 0x40101] (d=0, p=0)
[ 0.649549] pci 0000:00:04.0: BAR 0: reserving [mem 0xfebf1000-0xfebf100f flags 0x40200] (d=0, p=0)
[ 0.652166] reserve RAM buffer: 000000000009f400 - 000000000009ffff
[ 0.653270] reserve RAM buffer: 000000000fffe000 - 000000000fffffff
[ 0.654457] device class 'net': registering
[ 0.655343] device: 'lo': device_add
[ 0.656055] PM: Adding info for No Bus:lo
[ 0.672320] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.676491] Switching to clocksource hpet
[ 0.677618] Warning: could not register annotated branches stats
[ 0.684848] bus: 'pnp': add driver system
[ 0.685605] pnp: PnP ACPI init
[ 0.686172] device: 'pnp0': device_add
[ 0.686864] PM: Adding info for No Bus:pnp0
[ 0.687660] ACPI: bus type pnp registered
[ 0.688443] pnp 00:00: [bus 00-ff]
[ 0.689066] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.689806] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.690647] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.691538] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.692506] pnp 00:00: [mem 0xe0000000-0xfebfffff window]
[ 0.693475] device: '00:00': device_add
[ 0.694206] bus: 'pnp': add device 00:00
[ 0.694922] PM: Adding info for pnp:00:00
[ 0.695697] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.696889] pnp 00:01: [io 0x0070-0x0071]
[ 0.697663] IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:3)
[ 0.699126] pnp 00:01: [irq 8]
[ 0.699701] pnp 00:01: [io 0x0072-0x0077]
[ 0.700435] device: '00:01': device_add
[ 0.701143] bus: 'pnp': add device 00:01
[ 0.701855] PM: Adding info for pnp:00:01
[ 0.702586] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.703866] pnp 00:02: [io 0x0060]
[ 0.704512] pnp 00:02: [io 0x0064]
[ 0.705149] IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:3)
[ 0.706570] pnp 00:02: [irq 1]
[ 0.707171] device: '00:02': device_add
[ 0.707877] bus: 'pnp': add device 00:02
[ 0.708586] PM: Adding info for pnp:00:02
[ 0.709313] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.710516] IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:3)
[ 0.712007] pnp 00:03: [irq 12]
[ 0.712591] device: '00:03': device_add
[ 0.713291] bus: 'pnp': add device 00:03
[ 0.714000] PM: Adding info for pnp:00:03
[ 0.714743] pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.715974] pnp 00:04: [io 0x03f2-0x03f5]
[ 0.716724] pnp 00:04: [io 0x03f7]
[ 0.717357] IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:3)
[ 0.718789] pnp 00:04: [irq 6]
[ 0.719371] pnp 00:04: [dma 2]
[ 0.719940] device: '00:04': device_add
[ 0.720647] bus: 'pnp': add device 00:04
[ 0.721352] PM: Adding info for pnp:00:04
[ 0.722087] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.723355] pnp 00:05: [io 0x0378-0x037f]
[ 0.724107] IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:3)
[ 0.725522] pnp 00:05: [irq 7]
[ 0.726077] device: '00:05': device_add
[ 0.726795] bus: 'pnp': add device 00:05
[ 0.727536] PM: Adding info for pnp:00:05
[ 0.728267] pnp 00:05: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.729501] pnp 00:06: [io 0x03f8-0x03ff]
[ 0.730247] IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:3)
[ 0.731708] pnp 00:06: [irq 4]
[ 0.732268] device: '00:06': device_add
[ 0.732978] bus: 'pnp': add device 00:06
[ 0.733689] PM: Adding info for pnp:00:06
[ 0.734412] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.735849] pnp 00:07: [mem 0xfed00000-0xfed003ff]
[ 0.736715] device: '00:07': device_add
[ 0.737448] bus: 'pnp': add device 00:07
[ 0.738150] PM: Adding info for pnp:00:07
[ 0.738884] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.740293] pnp: PnP ACPI: found 8 devices
[ 0.741038] ACPI: ACPI bus type pnp unregistered
[ 0.741867] bus: 'pci': add driver pciback
[ 0.742622] bus: 'pci': driver_probe_device: matched device 0000:00:00.0 with driver pciback
[ 0.744122] bus: 'pci': really_probe: probing driver pciback with device 0000:00:00.0
[ 0.745530] pciback: probe of 0000:00:00.0 rejects match -19
[ 0.746541] bus: 'pci': driver_probe_device: matched device 0000:00:01.0 with driver pciback
[ 0.748051] bus: 'pci': really_probe: probing driver pciback with device 0000:00:01.0
[ 0.749433] pciback: probe of 0000:00:01.0 rejects match -19
[ 0.750439] bus: 'pci': driver_probe_device: matched device 0000:00:01.1 with driver pciback
[ 0.751945] bus: 'pci': really_probe: probing driver pciback with device 0000:00:01.1
[ 0.753328] pciback: probe of 0000:00:01.1 rejects match -19
[ 0.754333] bus: 'pci': driver_probe_device: matched device 0000:00:01.3 with driver pciback
[ 0.755854] bus: 'pci': really_probe: probing driver pciback with device 0000:00:01.3
[ 0.757229] pciback: probe of 0000:00:01.3 rejects match -19
[ 0.758227] bus: 'pci': driver_probe_device: matched device 0000:00:02.0 with driver pciback
[ 0.759740] bus: 'pci': really_probe: probing driver pciback with device 0000:00:02.0
[ 0.761120] pciback: probe of 0000:00:02.0 rejects match -19
[ 0.762121] bus: 'pci': driver_probe_device: matched device 0000:00:03.0 with driver pciback
[ 0.763647] bus: 'pci': really_probe: probing driver pciback with device 0000:00:03.0
[ 0.765030] pciback: probe of 0000:00:03.0 rejects match -19
[ 0.766037] bus: 'pci': driver_probe_device: matched device 0000:00:04.0 with driver pciback
[ 0.767548] bus: 'pci': really_probe: probing driver pciback with device 0000:00:04.0
[ 0.768930] pciback: probe of 0000:00:04.0 rejects match -19
[ 0.769971] device class 'mem': registering
[ 0.770757] device: 'mem': device_add
[ 0.771546] PM: Adding info for No Bus:mem
[ 0.772314] device: 'kmem': device_add
[ 0.773018] PM: Adding info for No Bus:kmem
[ 0.773790] device: 'null': device_add
[ 0.774490] PM: Adding info for No Bus:null
[ 0.775289] device: 'port': device_add
[ 0.775994] PM: Adding info for No Bus:port
[ 0.776764] device: 'zero': device_add
[ 0.777460] PM: Adding info for No Bus:zero
[ 0.778221] device: 'full': device_add
[ 0.778923] PM: Adding info for No Bus:full
[ 0.779737] device: 'random': device_add
[ 0.780475] PM: Adding info for No Bus:random
[ 0.781271] device: 'urandom': device_add
[ 0.782016] PM: Adding info for No Bus:urandom
[ 0.782838] device: 'kmsg': device_add
[ 0.783570] PM: Adding info for No Bus:kmsg
[ 0.784338] device: 'oldmem': device_add
[ 0.785068] PM: Adding info for No Bus:oldmem
[ 0.785867] device: 'tty': device_add
[ 0.786559] PM: Adding info for No Bus:tty
[ 0.787345] device: 'console': device_add
[ 0.788097] PM: Adding info for No Bus:console
[ 0.788912] device class 'firmware': registering
[ 0.789753] device class 'thermal': registering
[ 0.795257] PCI: max bus depth: 0 pci_try_num: 1
[ 0.796100] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.797099] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffffff]
[ 0.798272] NET: Registered protocol family 1
[ 0.799103] pci 0000:00:00.0: calling quirk_e100_interrupt+0x0/0x16f
[ 0.800247] pci 0000:00:00.0: calling quirk_cardbus_legacy+0x0/0x30
[ 0.801358] pci 0000:00:00.0: calling quirk_natoma+0x0/0x2b
[ 0.802350] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.803435] pci 0000:00:00.0: calling quirk_passive_release+0x0/0x90
[ 0.804587] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 0.805626] pci 0000:00:00.0: calling quirk_usb_early_handoff+0x0/0x5bd
[ 0.806806] pci 0000:00:00.0: calling pci_fixup_video+0x0/0xac
[ 0.807910] pci 0000:00:01.0: calling quirk_e100_interrupt+0x0/0x16f
[ 0.809046] pci 0000:00:01.0: calling quirk_cardbus_legacy+0x0/0x30
[ 0.810158] pci 0000:00:01.0: calling quirk_isa_dma_hangs+0x0/0x2e
[ 0.811277] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 0.812354] pci 0000:00:01.0: calling quirk_usb_early_handoff+0x0/0x5bd
[ 0.813531] pci 0000:00:01.0: calling pci_fixup_video+0x0/0xac
[ 0.814587] pci 0000:00:01.1: calling quirk_e100_interrupt+0x0/0x16f
[ 0.815747] pci 0000:00:01.1: calling quirk_cardbus_legacy+0x0/0x30
[ 0.816868] pci 0000:00:01.1: calling quirk_usb_early_handoff+0x0/0x5bd
[ 0.818039] pci 0000:00:01.1: calling pci_fixup_video+0x0/0xac
[ 0.819119] pci 0000:00:01.3: calling quirk_e100_interrupt+0x0/0x16f
[ 0.820252] pci 0000:00:01.3: calling quirk_cardbus_legacy+0x0/0x30
[ 0.821355] pci 0000:00:01.3: calling quirk_usb_early_handoff+0x0/0x5bd
[ 0.822525] pci 0000:00:01.3: calling pci_fixup_video+0x0/0xac
[ 0.823610] pci 0000:00:02.0: calling quirk_cardbus_legacy+0x0/0x30
[ 0.824724] pci 0000:00:02.0: calling quirk_usb_early_handoff+0x0/0x5bd
[ 0.825891] pci 0000:00:02.0: calling pci_fixup_video+0x0/0xac
[ 0.826947] pci 0000:00:02.0: Boot video device
[ 0.827805] pci 0000:00:03.0: calling quirk_e100_interrupt+0x0/0x16f
[ 0.828933] pci 0000:00:03.0: calling quirk_cardbus_legacy+0x0/0x30
[ 0.830045] pci 0000:00:03.0: calling quirk_usb_early_handoff+0x0/0x5bd
[ 0.831253] pci 0000:00:03.0: calling pci_fixup_video+0x0/0xac
[ 0.832308] pci 0000:00:04.0: calling quirk_e100_interrupt+0x0/0x16f
[ 0.833436] pci 0000:00:04.0: calling quirk_cardbus_legacy+0x0/0x30
[ 0.834549] pci 0000:00:04.0: calling quirk_usb_early_handoff+0x0/0x5bd
[ 0.835762] pci 0000:00:04.0: calling pci_fixup_video+0x0/0xac
[ 0.836823] PCI: CLS 0 bytes, default 64
[ 0.837678] Unpacking initramfs...
[ 1.752572] Freeing initrd memory: 23656k freed
[ 1.762360] DMA-API: preallocated 32768 debug entries
[ 1.763349] DMA-API: debugging enabled by kernel config
[ 1.764418] bus: 'machinecheck': registered
[ 1.765184] device: 'machinecheck': device_add
[ 1.765987] PM: Adding info for No Bus:machinecheck
[ 1.766872] device: 'machinecheck0': device_add
[ 1.767723] bus: 'machinecheck': add device machinecheck0
[ 1.768689] PM: Adding info for machinecheck:machinecheck0
[ 1.769679] device: 'machinecheck1': device_add
[ 1.770493] bus: 'machinecheck': add device machinecheck1
[ 1.771487] PM: Adding info for machinecheck:machinecheck1
[ 1.772488] device: 'mcelog': device_add
[ 1.773229] PM: Adding info for No Bus:mcelog
[ 1.774047] Machine check injector initialized
[ 1.774892] Registering platform device 'pcspkr'. Parent at platform
[ 1.776057] device: 'pcspkr': device_add
[ 1.776771] bus: 'platform': add device pcspkr
[ 1.777568] PM: Adding info for platform:pcspkr
[ 1.778388] microcode: no support for this CPU vendor
[ 1.779628] cryptomgr_test used greatest stack depth: 6448 bytes left
[ 1.783214] cryptomgr_test used greatest stack depth: 6168 bytes left
[ 1.786024] cryptomgr_test used greatest stack depth: 5680 bytes left
[ 1.787863] bus: 'platform': add driver alarmtimer
[ 1.788749] Registering platform device 'alarmtimer'. Parent at platform
[ 1.789947] device: 'alarmtimer': device_add
[ 1.790730] bus: 'platform': add device alarmtimer
[ 1.791628] PM: Adding info for platform:alarmtimer
[ 1.792514] bus: 'platform': driver_probe_device: matched device alarmtimer with driver alarmtimer
[ 1.794089] bus: 'platform': really_probe: probing driver alarmtimer with device alarmtimer
[ 1.795611] driver: 'alarmtimer': driver_bound: bound to device 'alarmtimer'
[ 1.796870] bus: 'platform': really_probe: bound device alarmtimer to driver alarmtimer
[ 1.798342] rcu-torture:--- Start of test: nreaders=4 nfakewriters=4 stat_interval=0 verbose=0 test_no_idle_hz=0 shuffle_interval=3 stutter=5 irqreader=1 fqs_duration=0 fqs_holdoff=0 fqs_stutter=3 test_boost=1/0 test_boost_interval=7 test_boost_duration=4 shutdown_secs=0 onoff_interval=0
[ 1.804244] bus: 'event_source': registered
[ 1.805022] device: 'breakpoint': device_add
[ 1.805793] bus: 'event_source': add device breakpoint
[ 1.806712] PM: Adding info for event_source:breakpoint
[ 1.807712] device: 'tracepoint': device_add
[ 1.808492] bus: 'event_source': add device tracepoint
[ 1.809406] PM: Adding info for event_source:tracepoint
[ 1.810355] device: 'software': device_add
[ 1.811133] bus: 'event_source': add device software
[ 1.812113] PM: Adding info for event_source:software
[ 1.813709] VFS: Disk quotas dquot_6.5.2
[ 1.814549] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.903037] alg: No test for cipher_null (cipher_null-generic)
[ 1.967035] alg: No test for ecb(cipher_null) (ecb-cipher_null)
[ 2.031035] alg: No test for digest_null (digest_null-generic)
[ 2.095034] alg: No test for compress_null (compress_null-generic)
[ 2.763064] Refined TSC clocksource calibration: 3092.966 MHz.
[ 2.764124] Switching to clocksource tsc
[ 3.630999] alg: No test for stdrng (krng)
[ 3.695152] bus: 'platform': add driver basic-mmio-gpio
[ 3.696121] bus: 'platform': add driver adp5520-gpio
[ 3.697041] bus: 'i2c': add driver adp5588-gpio
[ 3.697873] i2c-core: driver [adp5588-gpio] registered
[ 3.698800] bus: 'pci': add driver bt8xxgpio
[ 3.699721] bus: 'pci': add driver pch_gpio
[ 3.700500] bus: 'spi': add driver lms283gf05
[ 3.701293] bus: 'platform': add driver platform-lcd
[ 3.702197] bus: 'spi': add driver VGG2432A4
[ 3.703015] bus: 'spi': add driver ld9040
[ 3.703765] bus: 'platform': add driver max8925-backlight
[ 3.704735] bus: 'platform': add driver adp5520-backlight
[ 3.705718] bus: 'pci': add driver pm2fb
[ 3.706445] bus: 'pci': add driver matroxfb
[ 3.707244] rivafb_setup START
[ 3.707811] bus: 'pci': add driver rivafb
[ 3.708558] bus: 'pci': add driver nvidiafb
[ 3.709326] bus: 'pci': add driver aty128fb
[ 3.710096] bus: 'pci': add driver radeonfb
[ 3.710878] bus: 'pci': add driver sisfb
[ 3.711633] VIA Graphics Integration Chipset framebuffer 2.4 initializing
[ 3.712841] bus: 'platform': add driver viafb-i2c
[ 3.713696] bus: 'platform': add driver viafb-gpio
[ 3.714565] bus: 'pci': add driver viafb
[ 3.715299] bus: 'pci': add driver kyrofb
[ 3.716042] bus: 'pci': add driver tdfxfb
[ 3.716785] bus: 'pci': add driver vt8623fb
[ 3.717562] vmlfb: initializing
[ 3.718135] bus: 'pci': add driver vmlfb
[ 3.718863] bus: 'pci': add driver s3fb
[ 3.719588] bus: 'platform': add driver hecubafb
[ 3.720432] no IO addresses supplied
[ 3.721084] bus: 'pci': add driver sstfb
[ 3.721818] bus: 'pci': add driver cirrusfb
[ 3.722583] bus: 'pci': driver_probe_device: matched device 0000:00:02.0 with driver cirrusfb
[ 3.724097] bus: 'pci': really_probe: probing driver cirrusfb with device 0000:00:02.0
[ 3.726556] cirrusfb 0000:00:02.0: Cirrus Logic chipset on PCI bus, RAM (4096 kB) at 0xfc000000
[ 3.728148] device: 'fb0': device_add
[ 3.728848] PM: Adding info for No Bus:fb0
[ 3.729639] driver: '0000:00:02.0': driver_bound: bound to device 'cirrusfb'
[ 3.730893] bus: 'pci': really_probe: bound device 0000:00:02.0 to driver cirrusfb
[ 3.732253] bus: 'pci': add driver asiliantfb
[ 3.733060] bus: 'platform': add driver tmio-fb
[ 3.733886] bus: 'platform': add driver metronomefb
[ 3.734767] bus: 'platform': add driver s1d13xxxfb
[ 3.735656] bus: 'pci': add driver carminefb
[ 3.736443] Registering platform device 'vesafb.0'. Parent at platform
[ 3.737598] device: 'vesafb.0': device_add
[ 3.738329] bus: 'platform': add device vesafb.0
[ 3.739176] PM: Adding info for platform:vesafb.0
[ 3.740037] bus: 'platform': add driver vesafb
[ 3.740835] bus: 'platform': driver_probe_device: matched device vesafb.0 with driver vesafb
[ 3.742309] bus: 'platform': really_probe: probing driver vesafb with device vesafb.0
[ 3.743744] vesafb: probe of vesafb.0 rejects match -19
[ 3.744691] bus: 'platform': remove driver vesafb
[ 3.745535] driver: 'vesafb': driver_release
[ 3.746295] PM: Removing info for platform:vesafb.0
[ 3.747201] bus: 'platform': remove device vesafb.0
[ 3.748093] bus: 'acpi': add driver ac
[ 3.748812] bus: 'acpi': add driver button
[ 3.749582] bus: 'acpi': driver_probe_device: matched device LNXPWRBN:00 with driver button
[ 3.751074] bus: 'acpi': really_probe: probing driver button with device LNXPWRBN:00
[ 3.752458] device: 'input0': device_add
[ 3.753175] PM: Adding info for No Bus:input0
[ 3.754002] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 3.755342] ACPI: Power Button [PWRF]
[ 3.756047] driver: 'LNXPWRBN:00': driver_bound: bound to device 'button'
[ 3.757244] bus: 'acpi': really_probe: bound device LNXPWRBN:00 to driver button
[ 3.758567] bus: 'acpi': add driver fan
[ 3.759292] bus: 'acpi': add driver processor
[ 3.760095] bus: 'acpi': driver_probe_device: matched device LNXCPU:00 with driver processor
[ 3.761592] bus: 'acpi': really_probe: probing driver processor with device LNXCPU:00
[ 3.763202] device: 'cooling_device0': device_add
[ 3.764068] PM: Adding info for No Bus:cooling_device0
[ 3.765015] driver: 'LNXCPU:00': driver_bound: bound to device 'processor'
[ 3.766239] bus: 'acpi': really_probe: bound device LNXCPU:00 to driver processor
[ 3.767622] bus: 'acpi': driver_probe_device: matched device LNXCPU:01 with driver processor
[ 3.769111] bus: 'acpi': really_probe: probing driver processor with device LNXCPU:01
[ 3.770584] device: 'cooling_device1': device_add
[ 3.771456] PM: Adding info for No Bus:cooling_device1
[ 3.772381] driver: 'LNXCPU:01': driver_bound: bound to device 'processor'
[ 3.773595] bus: 'acpi': really_probe: bound device LNXCPU:01 to driver processor
[ 3.774948] bus: 'acpi': add driver container
[ 3.777487] bus: 'acpi': add driver thermal
[ 3.778314] ioatdma: Intel(R) QuickData Technology Driver 4.00
[ 3.779375] bus: 'pci': add driver ioatdma
[ 3.780126] bus: 'platform': add driver timb-dma
[ 3.780960] bus: 'pci': add driver pch-dma
[ 3.781713] bus: 'i2c': add driver LP3971
[ 3.782445] i2c-core: driver [LP3971] registered
[ 3.783300] r3964: Philips r3964 Driver $Revision: 1.10 $
[ 3.784265] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 3.785413] Registering platform device 'serial8250'. Parent at platform
[ 3.786612] device: 'serial8250': device_add
[ 3.787394] bus: 'platform': add device serial8250
[ 3.788257] PM: Adding info for platform:serial8250
[ 3.811691] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 3.812778] device: 'ttyS0': device_add
[ 3.813558] bus: 'acpi': add driver battery
[ 3.813574] PM: Adding info for No Bus:ttyS0
bisect: skip d1c3ed669a2d452cacfb48c2d171a1f364dae2ed: not a good merge base
git checkout v3.2

2013-01-11-10:39:28 805a6af8dba5dfdd35ec35dc52ec0122400b2610 compiling
/home/wfg/linux

2013-01-11-10:40:57 detecting boot state 3.2.0-bisect #2 .1.23...4.56..............7...............................................OK .OK ..8OK 9OK .OK .10OK 111213OK .OK ..14OK .15OK .OK ..1617.......OK ..18....................................................OK 19OK 20...OK .OK 21OK .OK 22.OK .23.OK .24...OK .25....OK 26................................................OK .OK .OK .2728.OK ..OK 29..OK 30OK ..OK 31.3233.OK .34....OK .35.....................................................OK .OK 3637..OK .38.OK ..OK .394041.OK .42.OK ..43OK .44.45..OK .46................................................47.48.49OK .OK 50.51.OK 52.535455OK .OK .OK 565758OK .59..OK ..OK 6061OK .62..OK .63...........................................OK .64OK .65OK .66OK .67.OK ..68OK .OK .OK .6970OK 71OK .OK 72..OK .73OK ..OK 74.75.OK 7677...............................................OK .78OK .79OK ..OK 80.81OK 82.83..OK .OK ..84OK 8586OK ..OK 87.88OK 89OK .90OK 91OK .OK 92939495OK .96..........................................OK .97OK .98....OK .99OK .OK 100101.OK .102.OK .OK .103OK .104.105OK .OK .OK 106OK 107108109OK .OK 110.OK 111OK SUCCESS
bisect: good commit v3.2
git bisect start 59a56802918100c1e39e68c30a2e5ae9f7d837f0 v3.2 --
Bisecting: 3108 revisions left to test after this (roughly 12 steps)
[972b2c719990f91eb3b2310d44ef8a2d38955a14] Merge branch 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
git bisect run /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-11-10:55:10 972b2c719990f91eb3b2310d44ef8a2d38955a14 compiling
2013-01-11-10:55:56 972b2c719990f91eb3b2310d44ef8a2d38955a14 SKIP BROKEN BUILD
/usr/bin/make -C source O=/cc/wfg/linux-bisect-x86_64 ARCH=x86_64 distclean
make: Entering directory `/c/wfg/linux'
CLEAN .
CLEAN arch/x86/kernel/cpu
CLEAN arch/x86/kernel
CLEAN arch/x86/vdso
CLEAN arch/x86/lib
CLEAN firmware
CLEAN kernel
CLEAN lib
CLEAN usr
CLEAN Documentation/accounting
CLEAN Documentation/auxdisplay
CLEAN Documentation/connector
CLEAN Documentation/filesystems
CLEAN Documentation/ia64
CLEAN Documentation/laptops
CLEAN Documentation/networking/timestamping
CLEAN Documentation/networking
CLEAN Documentation/pcmcia
CLEAN Documentation/spi
CLEAN Documentation/timers
CLEAN Documentation/vm
CLEAN Documentation/watchdog/src
CLEAN arch/x86/boot/compressed
CLEAN arch/x86/boot
CLEAN .tmp_versions
CLEAN vmlinux System.map .tmp_kallsyms1.S .tmp_kallsyms1.o .tmp_kallsyms2.S .tmp_kallsyms2.o .tmp_vmlinux1 .tmp_vmlinux2 .tmp_System.map
CLEAN scripts/basic
CLEAN scripts/kconfig
CLEAN scripts/mod
CLEAN scripts
CLEAN include/config usr/include include/generated arch/x86/include/generated
CLEAN .config .config.old .version include/linux/version.h Module.symvers
make: Leaving directory `/c/wfg/linux'
Bisecting: 3108 revisions left to test after this (roughly 12 steps)
[3d6acefc0a24bf90746c1f259e9d65d1ed7ea5e2] iwlwifi: move ucode_type from iwl_priv to iwl_shared
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-11-10:56:15 3d6acefc0a24bf90746c1f259e9d65d1ed7ea5e2 compiling
/home/wfg/linux

2013-01-11-10:57:48 detecting boot state 3.2.0-rc2-bisect-00698-g3d6acef #1 1..2345.6...7.8................................9..10...11.......12..1314.OK .15....OK .16OK .OK .17.OK .18..OK .OK 19OK .OK .20.21OK 2223OK .24OK .25...........................OK 26..OK .27..OK .28.....OK .OK 2930..OK .31.OK 32....OK .33OK .34OK 35...OK .36.OK .37.OK .38OK .OK 39OK 4041OK .42OK .43......................OK .44..OK .45..OK .46.....OK .OK .4748.OK ..OK 49.50...OK .51OK .OK .52.53.OK ..54....OK .55.OK .56OK .OK .OK ...OK 5758OK 596061....................OK .62..OK .63..OK .64.....OK .65OK .66..OK .OK 67.68......OK .OK 69OK .7071......OK .72......OK .73...OK .74OK .OK ..OK 757677...............OK .78.OK .79...OK .80.....OK .OK 81.82..OK .83OK .84....OK .OK .85OK .86OK .87......OK .88.....OK .89....OK .90OK .91OK 92OK 9394................OK .95.OK .96...OK .97...OK ..OK 9899OK ..OK .100.....OK .OK 101.OK 102OK ..103....OK .104......OK .105....OK .106...OK .107OK .OK .OK 108OK SUCCESS
Bisecting: 2805 revisions left to test after this (roughly 12 steps)
[48fa57ac2c30a8a0b770b7ad50b4b30c1d12f005] Merge tag 'infiniband-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-11-11:08:13 48fa57ac2c30a8a0b770b7ad50b4b30c1d12f005 compiling
2013-01-11-11:08:57 48fa57ac2c30a8a0b770b7ad50b4b30c1d12f005 SKIP BROKEN BUILD
/usr/bin/make -C source O=/cc/wfg/linux-bisect-x86_64 ARCH=x86_64 distclean
make: Entering directory `/c/wfg/linux'
CLEAN .
CLEAN arch/x86/kernel/cpu
CLEAN arch/x86/kernel
CLEAN arch/x86/vdso
CLEAN arch/x86/lib
CLEAN firmware
CLEAN kernel
CLEAN lib
CLEAN usr
CLEAN Documentation/accounting
CLEAN Documentation/auxdisplay
CLEAN Documentation/connector
CLEAN Documentation/filesystems
CLEAN Documentation/ia64
CLEAN Documentation/laptops
CLEAN Documentation/networking/timestamping
CLEAN Documentation/networking
CLEAN Documentation/pcmcia
CLEAN Documentation/spi
CLEAN Documentation/timers
CLEAN Documentation/vm
CLEAN Documentation/watchdog/src
CLEAN arch/x86/boot/compressed
CLEAN arch/x86/boot
CLEAN .tmp_versions
CLEAN vmlinux System.map .tmp_kallsyms1.S .tmp_kallsyms1.o .tmp_kallsyms2.S .tmp_kallsyms2.o .tmp_vmlinux1 .tmp_vmlinux2 .tmp_System.map
CLEAN scripts/basic
CLEAN scripts/kconfig
CLEAN scripts/mod
CLEAN scripts
CLEAN include/config usr/include include/generated arch/x86/include/generated
CLEAN .config .config.old .version include/linux/version.h Module.symvers
make: Leaving directory `/c/wfg/linux'
Bisecting: 2805 revisions left to test after this (roughly 12 steps)
[63ec3c83e7ba6f23227d3ff69c5792911266bd75] niu: Remove redundant PHY ID test.
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-11-11:09:09 63ec3c83e7ba6f23227d3ff69c5792911266bd75 compiling
/home/wfg/linux

2013-01-11-11:10:41 detecting boot state 3.2.0-rc2-bisect-01144-g63ec3c8 #1 OK .1.OK .OK .23..OK .4......OK .5....OK .6......OK .7OK 8..OK .910...........OK .11...OK 12...OK 13.....OK .OK 1415.OK .16OK .17..OK .18OK ..19.OK .OK .OK 20.2122....OK ..23.......OK ..24OK .25...OK .OK 26OK ...2728........OK .29......OK ..30.OK .31....OK ..OK 32.33.OK .OK 34.35.OK ..36OK .OK 37.38..OK .OK .3940...OK ..41........OK .42OK ..43......OK .OK 4445.OK .46.....OK .47.......OK .48.OK .49.....OK .50OK 51.......OK .OK 52.OK 5354....OK .OK .OK 55.56..OK ..57.......OK .58..OK .59..OK .60..OK .OK .61OK 6263...........OK .64.....OK .65.OK 66....OK .67......OK .68OK .69OK .70.....OK .OK 71OK .72...OK .73.......OK .74..OK .75..OK .76OK .7778OK ..OK 798081.OK ..82........OK .83.....OK .OK 84.85........OK .OK 86OK ...87.OK .88....OK ..OK 89.90..OK .91.......OK ..92.OK .93..OK ..94OK ..95OK .OK 96OK .9798.OK .99........OK SUCCESS
Bisecting: 2689 revisions left to test after this (roughly 11 steps)
[5983faf942f260023e547f3c5f38c1033c35cc9b] Merge branch 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-11-11:20:05 5983faf942f260023e547f3c5f38c1033c35cc9b compiling
2013-01-11-11:20:49 5983faf942f260023e547f3c5f38c1033c35cc9b SKIP BROKEN BUILD
/usr/bin/make -C source O=/cc/wfg/linux-bisect-x86_64 ARCH=x86_64 distclean
make: Entering directory `/c/wfg/linux'
CLEAN .
CLEAN arch/x86/kernel/cpu
CLEAN arch/x86/kernel
CLEAN arch/x86/vdso
CLEAN arch/x86/lib
CLEAN firmware
CLEAN kernel
CLEAN lib
CLEAN usr
CLEAN Documentation/accounting
CLEAN Documentation/auxdisplay
CLEAN Documentation/connector
CLEAN Documentation/filesystems
CLEAN Documentation/ia64
CLEAN Documentation/laptops
CLEAN Documentation/networking/timestamping
CLEAN Documentation/networking
CLEAN Documentation/pcmcia
CLEAN Documentation/spi
CLEAN Documentation/timers
CLEAN Documentation/vm
CLEAN Documentation/watchdog/src
CLEAN arch/x86/boot/compressed
CLEAN arch/x86/boot
CLEAN .tmp_versions
CLEAN vmlinux System.map .tmp_kallsyms1.S .tmp_kallsyms1.o .tmp_kallsyms2.S .tmp_kallsyms2.o .tmp_vmlinux1 .tmp_vmlinux2 .tmp_System.map
CLEAN scripts/basic
CLEAN scripts/kconfig
CLEAN scripts/mod
CLEAN scripts
CLEAN include/config usr/include include/generated arch/x86/include/generated
CLEAN .config .config.old .version include/linux/version.h Module.symvers
make: Leaving directory `/c/wfg/linux'
Bisecting: 2689 revisions left to test after this (roughly 11 steps)
[71d8f162ac50679ce45b537c18adbf83113de36b] arm/tegra: Remove useless entries from ventana_pinmux[]
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-11-11:21:00 71d8f162ac50679ce45b537c18adbf83113de36b compiling
/home/wfg/linux

2013-01-11-11:22:32 detecting boot state 3.2.0-rc4-bisect-00007-g71d8f16 #1 OK ....OK .1..OK .2...OK .3..OK .OK 45.OK .67.OK .8....OK .9....OK .10....OK .11....OK 12...OK .OK 13OK ..14.......OK ..OK 1516...OK .17........OK ..18..OK .19..OK .20...OK ..2122OK ..23OK 24.25...OK ..26...OK ..27...OK ..28..OK .29....OK 30.OK .31..OK .32.....OK .33OK .34OK .35.........OK .36...OK 37...OK 38.OK .39.OK .40OK 41...OK .OK 4243OK .44...OK .45...OK .46.....OK .47..OK .48..OK .OK 4950.OK .51..OK .52.OK 53.OK ..54OK .55........OK .56..OK .57..OK .58.....OK 59..OK .OK 6061...OK .62OK .OK 63OK 6465.......OK ..66OK .67......OK .68..OK .69OK .70OK .71..OK .72OK .73..OK .74OK .75....OK .76......OK .77OK .78OK .79........OK .80OK .81.OK .OK 8283OK .84OK ..85......OK ..86OK .87......OK .88..OK ..OK 89.OK 9091..OK .92.OK 93..OK ..OK 9495........OK .96....OK .97OK .98.......OK .99OK .100..OK SUCCESS
Bisecting: 2682 revisions left to test after this (roughly 11 steps)
[a1910f9cad2b4b9cc0d5d326aa65632a23c16088] mac80211_hwsim: fix wmediumd_pid
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-11-11:31:16 a1910f9cad2b4b9cc0d5d326aa65632a23c16088 compiling
/home/wfg/linux

2013-01-11-11:32:44 detecting boot state 3.2.0-rc2-bisect-01068-ga1910f9 #2 1.23.................4.5.............67.8910......11..12....13...14.15.OK .16......OK .OK 17.18.OK .OK 19.OK .2021...............OK .OK 2223............OK .OK .OK .OK 2425OK .OK .2627...OK ..28OK .29...OK .30..OK .31.OK .32OK ..33......OK .OK 3435.....OK .3637OK ..38........OK .39OK .40................OK .OK 41..OK 4243.OK 44......OK .45..OK ..46.OK .47....OK .OK 4849.OK .50...OK ..51...OK .OK ..52OK 5354.....OK 55OK .56................OK .OK 5758.OK .59..OK .OK 60.OK 6162......OK 63...OK ..64.OK .65OK .66...OK .67.OK .68....OK .69......OK .OK .707172..OK ..OK 73.74...............OK .OK ..7576....OK .OK 77OK .7879....OK ..80..OK ..81OK .82.OK .83...OK .84.OK .OK .85.86..........OK .OK ..8788OK .OK 8990................OK .91..OK .92.OK 93.....OK 94OK 9596....OK .97...OK .98.OK 99..OK .100......OK .OK 101OK .102.............OK .OK .103OK 104OK 105106.107..........OK ..108.OK ..OK 109.110...OK .OK 111OK .112....OK .113...OK .114.OK SUCCESS
Bisecting: 2438 revisions left to test after this (roughly 11 steps)
[55b81e6f2795484ea8edf5805c95c007cacfa736] Merge branch 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-11-11:43:47 55b81e6f2795484ea8edf5805c95c007cacfa736 compiling
2013-01-11-11:44:32 55b81e6f2795484ea8edf5805c95c007cacfa736 SKIP BROKEN BUILD
/usr/bin/make -C source O=/cc/wfg/linux-bisect-x86_64 ARCH=x86_64 distclean
make: Entering directory `/c/wfg/linux'
CLEAN .
CLEAN arch/x86/kernel/cpu
CLEAN arch/x86/kernel
CLEAN arch/x86/vdso
CLEAN arch/x86/lib
CLEAN firmware
CLEAN kernel
CLEAN lib
CLEAN usr
CLEAN Documentation/accounting
CLEAN Documentation/auxdisplay
CLEAN Documentation/connector
CLEAN Documentation/filesystems
CLEAN Documentation/ia64
CLEAN Documentation/laptops
CLEAN Documentation/networking/timestamping
CLEAN Documentation/networking
CLEAN Documentation/pcmcia
CLEAN Documentation/spi
CLEAN Documentation/timers
CLEAN Documentation/vm
CLEAN Documentation/watchdog/src
CLEAN arch/x86/boot/compressed
CLEAN arch/x86/boot
CLEAN .tmp_versions
CLEAN vmlinux System.map .tmp_kallsyms1.S .tmp_kallsyms1.o .tmp_kallsyms2.S .tmp_kallsyms2.o .tmp_vmlinux1 .tmp_vmlinux2 .tmp_System.map
CLEAN scripts/basic
CLEAN scripts/kconfig
CLEAN scripts/mod
CLEAN scripts
CLEAN include/config usr/include include/generated arch/x86/include/generated
CLEAN .config .config.old .version include/linux/version.h Module.symvers
make: Leaving directory `/c/wfg/linux'
Bisecting: 2438 revisions left to test after this (roughly 11 steps)
[2d31597d37ec8842b9575005190fde2898764628] lttng: offset alignment header
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-11-11:44:44 2d31597d37ec8842b9575005190fde2898764628 compiling
/home/wfg/linux

2013-01-11-11:46:14 detecting boot state 3.2.0-rc3-bisect-00185-g2d31597 #1 .........1.23..4...5.6....78..910......11............1213.................OK 14OK .15OK .16OK .17.........OK .OK ..OK 181920OK .21..OK .OK 22.OK 23OK .2425OK .OK .2627....OK .28...........OK ..OK 2930....................OK .OK 3132.OK .OK 33OK .3435.........OK ..OK 363738....OK .OK 3940.OK .41.OK ..OK 42.OK 4344................OK .OK .454647..................OK .OK .48OK ..49OK ..50........OK .51OK .52...OK .53OK .OK .5455....OK ..OK 56OK ..575859..........OK .60...OK .6162...................OK 6364OK 65OK 6667.OK .68........OK .69OK .70...OK .71.OK .OK .OK 7273OK .OK 7475.....OK .OK .7677.....OK ..78...OK ..7980.................OK .81OK 82OK ..8384OK .85............OK .86OK .OK .8788OK .89...OK .OK 9091OK .OK .92......OK .OK 93.94....OK ..95....OK ..96................OK ..OK 9798OK .OK ..99OK 100.101..........OK ..102OK .OK .103.OK .104...OK ..105OK 106OK .107108.....OK .OK 109..110...OK .111.OK .112..OK .113.................OK .OK 114115.OK .OK 116117OK SUCCESS
Bisecting: 2497 revisions left to test after this (roughly 11 steps)
[c9667bff9d191db5775d383d9b5efecc26eccae1] staging/mei: remove outdated comment about setting iamthif_mtu
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-11-11:57:41 c9667bff9d191db5775d383d9b5efecc26eccae1 compiling
/home/wfg/linux

2013-01-11-11:59:19 detecting boot state 3.2.0-rc5-bisect-00393-gc9667bf #2 ......1...2.3.4.5..6..7.........8...910..11...12...13...........14.....OK .15.OK .OK .16OK 1718.19.......OK .20..OK .OK .21OK .OK 2223.....OK 24OK .OK .2526......OK ..27..OK .2829.....OK .30..OK .31.OK .32.............OK .33..OK .34OK .OK .OK 353637......OK ..38..OK .OK .OK 3940OK 4142...OK .43.OK 44OK 45.......OK .46...OK 47OK 4849.....OK .50.OK .51......OK 52..........OK .53....OK .54OK ..5556.OK .57......OK .OK 58OK 59.60OK 61.62OK .OK 63.64......OK .65..OK .OK .OK ..6667...OK .68.OK ..69........OK .70..........OK ..71...OK .72.OK ..73.OK .74......OK .75OK .OK 76.77OK .78OK .OK 79OK 8081......OK ..82...OK .OK .OK 838485.OK .OK ..86...........OK .87...........OK ..8889.OK ..90.OK ..91OK .92.....OK .OK .93OK .9495...OK .OK 96OK .979899.....OK .100.....OK 101OK 102..OK .103OK .104105..........OK 106.............OK .107...OK .108109OK .110.OK 111.......OK .OK 112113OK .114..OK .115.OK .OK .116117OK .118..OK ..119....OK SUCCESS
Bisecting: 2289 revisions left to test after this (roughly 11 steps)
[2fd149645eb46d26130d7070c6de037dddf34880] ARM: OMAP2+: UART: Remove omap_uart_can_sleep and add pm_qos
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-11-12:09:56 2fd149645eb46d26130d7070c6de037dddf34880 compiling
/home/wfg/linux

2013-01-11-12:11:28 detecting boot state 3.2.0-rc4-bisect-00108-g2fd1496 #3 ..12...3.........4..............5...6..7.....8....9....10..1112.......13OK .OK ..141516..OK ..17OK .OK 1819..OK .OK .20.......OK .21..............OK 22..OK 23..OK .24....OK .25...OK 26.....OK .27OK .OK 2829......OK .30..OK .31OK .OK 3233....OK .34OK .35...OK ..36................OK .37..OK .38.OK ..39...OK .40...OK .41....OK .42OK .OK 4344.OK ..45....OK ..46...OK .OK ..OK 47..48...OK .OK 49.50...OK .OK ..5152..............OK .53.OK .5455.OK ..56...OK .57...OK .58...OK .59.OK .60..OK .61....OK .62.....OK .OK 63.64OK ..65..OK .66OK .67.....OK .OK .6869OK ..70..........OK .71.OK .OK .7273.OK .74...OK .75...OK .76...OK .77.OK .78..OK .79....OK .80.....OK .81OK 82.OK .OK 8384....OK .85......OK .86.OK .87..........OK .OK .8889..OK .90.OK .91...OK .92...OK ..93.OK .OK 9495.OK .9697...OK ..98...OK .99...OK .OK .100101OK .102.....OK .103.OK ..104.OK .OK .105106.............OK .OK 107.108OK .OK .109110.....OK .111....OK .112.OK .OK SUCCESS
Bisecting: 2263 revisions left to test after this (roughly 11 steps)
[2b246283277862c4866a005852af5c70fd581824] spi-topcliff-pch: Change company name OKI SEMICONDUCTOR to LAPIS Semiconductor
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-11-12:22:32 2b246283277862c4866a005852af5c70fd581824 compiling
/home/wfg/linux

2013-01-11-12:24:06 detecting boot state 3.1.0-bisect-00017-g2b24628 #4 1....2...........34......5....6..7.8..............910...11......12....OK .13.OK .14OK .15..OK .OK 16.17..OK ..18.....OK ..OK 1920.OK .21.OK ..22..OK .23.OK .24OK .25..........OK .26.OK ..27.OK .OK .2829........OK ..30...OK .31.OK .OK 32.33..OK ..OK 34.35..OK ..36.....OK .OK 37.38OK ..39.OK .40..OK .41.OK .42.OK 43...........OK .44.OK .45...OK ..46........OK .47..OK .48OK .49..OK ..50OK .51OK .OK ..52....OK ..53.OK .54.OK .55...OK ..56OK .57..OK 58OK .59OK .60.............OK 61..OK .OK 6263..OK .64.OK 65...........OK .66OK .67..OK .68.OK 69..OK .OK 7071....OK .7273.OK 74.OK .75....OK .76OK ..77.OK .OK 78.OK 7980.........OK ..81OK ..OK 82.83.....OK .84OK .85......OK ..86...OK .87..OK .88.OK ...89OK .90.....OK ..91OK 92.93OK ..94...OK ..OK 95.96.OK .OK 97.OK 9899.........OK .100..OK .OK 101.102......OK .103OK .104.....OK .105...OK .106..OK .OK 107108......OK .109.OK .110......OK ..OK 111.112.OK SUCCESS
Bisecting: 2263 revisions left to test after this (roughly 11 steps)
[a8a363ac3b0cc947c5153d5b2e46c07bb496958b] brcm80211: fmac: move common layer bus interface context to dhd_bus.h
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-11-12:34:26 a8a363ac3b0cc947c5153d5b2e46c07bb496958b compiling
/home/wfg/linux

2013-01-11-12:36:13 detecting boot state 3.2.0-rc2-bisect-01230-ga8a363a #5 ........1...2.3......4..5......6.....7..8....9.....10.....11.1213....OK 14.OK 15.16OK .OK ..OK 17.18.....OK ..19.OK .OK .20.21........OK .22OK ..23.....OK .24....OK .25.OK .26.......OK .27OK .28.....OK .OK 29OK 3031....OK 32OK .33OK .34..OK .35..OK .OK 3637..OK ..38..OK .OK 3940.........OK ..41OK .42.OK .43....OK .44..OK .45.OK ..46....OK .47OK .48...OK 49....OK .OK 50.51OK .52OK .53..OK .54..OK ..OK 5556......OK .57..OK .58OK .59.........OK .OK 60OK 6162.......OK ..63.....OK .64....OK .65OK .66..OK ..67.OK 68.OK ..69.OK .70OK .71..OK .72....OK .OK .7374....OK ..OK 75.OK 76.77..........OK .OK 78.OK 7980.......OK ..81...OK ..82....OK .83OK .84...OK .85OK .86OK .OK .8788...OK .89.....OK .90..OK .OK 9192.OK .93..OK .94OK .95OK .96..........OK .97OK .98...OK .99....OK ..100..OK .OK 101102....OK .103OK .104...OK 105.OK ..106OK .OK 107108...OK .109.OK ..110..OK .111.OK .112....OK SUCCESS
Bisecting: 2263 revisions left to test after this (roughly 11 steps)
[ae2eca724af2802739efe02b3fc56daa8b674eb9] m68k: add cache support for V4e ColdFire cores running with MMU enabled
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-11-12:46:09 ae2eca724af2802739efe02b3fc56daa8b674eb9 compiling
/home/wfg/linux

2013-01-11-12:47:35 detecting boot state 3.2.0-rc7-bisect-00034-gae2eca7 #6 12....3..4...5.......6.7............8.9..........1011.........121314...OK .OK .1516......OK .OK 17.18...OK .19OK .20..OK .21........OK .OK 2223...........OK .24.OK 25.........OK .26OK .27........OK .OK 282930....OK .3132......OK 33OK .OK .34OK 35.36.OK .37........OK .OK 3839...........OK .40.OK .41..........OK .42.OK .4344.........OK 45OK 4647.....OK .4849.....OK .50OK .OK .51OK 525354.OK .55.......OK .OK .5657.....OK .58...OK ..59...........OK .OK .6061OK ..62........OK .OK .OK 636465OK .66...OK .67....OK ..68.OK .OK .OK .OK 69.707172........OK .OK ..73....OK .74....OK .75............OK 76OK 77.OK .78........OK 79.OK 80.OK 81.OK .82OK 83....OK .84.........OK .OK 85OK .OK 868788....OK ..8990...OK .91...OK ..92...........OK .OK 9394.OK .95...OK .96.......OK .OK 9798...OK 99OK .100....OK .101.........OK .102OK .OK 103OK 104105.....OK .OK .106...OK .107...OK .108.........OK .109.OK .110.OK .111....OK .112...OK .OK .113114.....OK .115OK .116OK .117............OK .OK SUCCESS
Bisecting: 2263 revisions left to test after this (roughly 11 steps)
[5c395ae7033099fc657114ea997858aa622f08b2] Merge branch 'linux-next' of git://git.infradead.org/ubifs-2.6
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-11-12:59:13 5c395ae7033099fc657114ea997858aa622f08b2 compiling
2013-01-11-12:59:55 5c395ae7033099fc657114ea997858aa622f08b2 SKIP BROKEN BUILD
/usr/bin/make -C source O=/cc/wfg/linux-bisect-x86_64 ARCH=x86_64 distclean
make: Entering directory `/c/wfg/linux'
CLEAN .
CLEAN arch/x86/kernel/cpu
CLEAN arch/x86/kernel
CLEAN arch/x86/vdso
CLEAN arch/x86/lib
CLEAN firmware
CLEAN kernel
CLEAN lib
CLEAN usr
CLEAN Documentation/accounting
CLEAN Documentation/auxdisplay
CLEAN Documentation/connector
CLEAN Documentation/filesystems
CLEAN Documentation/ia64
CLEAN Documentation/laptops
CLEAN Documentation/networking/timestamping
CLEAN Documentation/networking
CLEAN Documentation/pcmcia
CLEAN Documentation/spi
CLEAN Documentation/timers
CLEAN Documentation/vm
CLEAN Documentation/watchdog/src
CLEAN arch/x86/boot/compressed
CLEAN arch/x86/boot
CLEAN .tmp_versions
CLEAN vmlinux System.map .tmp_kallsyms1.S .tmp_kallsyms1.o .tmp_kallsyms2.S .tmp_kallsyms2.o .tmp_vmlinux1 .tmp_vmlinux2 .tmp_System.map
CLEAN scripts/basic
CLEAN scripts/kconfig
CLEAN scripts/mod
CLEAN scripts
CLEAN include/config usr/include include/generated arch/x86/include/generated
CLEAN .config .config.old .version include/linux/version.h Module.symvers
make: Leaving directory `/c/wfg/linux'
Bisecting: 2263 revisions left to test after this (roughly 11 steps)
[5b859b6ebb18b37244d44b5300bf765694b7303c] crypto: talitos - be less noisy on startup
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-11-13:00:03 5b859b6ebb18b37244d44b5300bf765694b7303c compiling
/home/wfg/linux

2013-01-11-13:01:31 detecting boot state 3.2.0-rc1-bisect-00031-g5b859b6 #1 .....1.2...3.4...5.6...7.............8.9..10...11...12....1314........15.........OK .1617....OK .18OK .19..OK .20OK .21..OK .22OK .23..OK ..24...........OK .25OK ..26OK .27.OK ..28..OK .29...OK .OK 30.31......OK .32.........OK .33....OK .34OK .35...OK .36OK .37..OK .38OK .39..OK .40............OK .41.OK .42OK 43..OK .44...OK 45....OK .OK 4647...OK 48..........OK .49..OK .50..OK .51OK .52.....OK .53OK .54..OK .55OK ..56...........OK .57OK ..OK 58.59OK ..60..OK .61....OK .OK 6263......OK .64..........OK .65..OK .66..OK .67OK .68.....OK ..OK 6970..OK .71.OK ..72.....OK .73...OK .74.OK .75OK .76OK ..77..OK .78.....OK ..79.....OK .80......OK .81......OK .82OK ..OK 8384.OK .85.....OK .86...OK ..87.OK .88..OK .89.......OK .90OK .91OK .92..OK .93..OK 94.......OK .95OK 96...........OK 97.......OK 9899OK .100...OK .101.....OK .OK 102103...OK .104105....OK ..106......OK .107OK .108OK .109110OK .111......OK .OK .112OK 113114.........OK ..115.....OK .OK .116OK 117118...OK SUCCESS
Bisecting: 2232 revisions left to test after this (roughly 11 steps)
[7c4cab7f401a834bdf3878d417bf77d3290d4cfc] ARM: S5PC100: Modify platform data for pl330 driver
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-11-13:13:02 7c4cab7f401a834bdf3878d417bf77d3290d4cfc compiling
/home/wfg/linux

2013-01-11-13:14:27 detecting boot state 3.2.0-rc6-bisect-00022-g7c4cab7 #2 .123...........4.5......67...........8..910.11..............1213........OK 14.....OK .OK .15..OK .16........OK .17.OK .18.......OK .OK 1920......OK 21..OK .22.OK .23OK ..OK 242526........OK .27..OK ..28...OK .29.....OK ...3031OK .32........OK .33OK ..34.......OK .OK 3536.....OK ..37.....OK .38.OK .39.OK .40OK ..4142.......OK .4344.OK .45....OK .46.....OK .47OK ..484950........OK .51.OK .52......OK .OK .53......OK ..54...OK .OK 5556....OK .OK 5758OK .59.....OK .60.OK ..61.......OK .62.....OK .OK .63OK 64OK .6566........OK .67.OK .68...OK .OK 69.......OK 70........OK .OK 71......OK .72OK .OK 7374....OK 7576..OK 77....OK .78.......OK 79...OK .80OK .OK .8182.....OK .83OK .84..OK ..8586....OK .87........OK ..8889......OK .OK .OK 90.91.....OK .OK .9293OK ..94...OK ..95......OK .96..OK .97.OK .OK 98OK .99100....OK 101......OK ..102...OK .103......OK ..104OK .105.....OK .106..OK .OK 107108.......OK .109110OK .111....OK .112......OK .113...OK .114.OK .OK 115OK .116117...OK SUCCESS
Bisecting: 2210 revisions left to test after this (roughly 11 steps)
[649fc7b1b046eb98bf9e3fe20c9d11f629293140] should_remove_suid(): inode->i_mode is umode_t
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-11-13:26:07 649fc7b1b046eb98bf9e3fe20c9d11f629293140 compiling
/home/wfg/linux

2013-01-11-13:27:34 detecting boot state 3.2.0-rc7-bisect-00173-g649fc7b #3 1..........2....3.......45......6...78.........9.1011....12......OK ..13......OK .OK 1415OK ..16OK ..17........OK ..18.OK .OK .19.....OK .20OK .21.....OK .2223..OK .24.......OK .25.OK .26...OK 27OK .28......OK .29......OK .30OK .31.OK ..OK 32.33.........OK .34..OK ..35....OK .36OK ..37.....OK .3839.OK .40.......OK ..41OK .42...OK .43OK 44.......OK 45.......OK 46OK .47.OK 48OK 4950...........OK .51OK .52..OK .53...OK .54.OK ..55.....OK ..56OK .57....OK ..OK 5859...OK 60OK .61......OK ..62......OK .OK 6364OK .65...OK .OK .6667........OK .68OK .69....OK .70...OK .71..OK 72......OK .OK 73.OK 74..OK .75...OK .76....OK 77........OK 78...OK .79...OK 80..OK .81...OK .OK 8283....OK .84OK .85....OK .86...OK .87.OK ..88.....OK ..OK .8990OK ..91..OK .OK .92...OK .93.......OK ..94......OK 9596..OK .97........OK .98....OK 99.OK .100....OK .101...OK .102.OK .103........OK .OK 104.105OK .OK 106OK .107.OK .108.............OK .109.OK .OK .110..OK SUCCESS
Bisecting: 1966 revisions left to test after this (roughly 11 steps)
[1f2e124df90cfc1347fd301409570fa9b0aed2c9] drm/radeon/kms: add missing ring ready check in sync tests
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-11-13:38:47 1f2e124df90cfc1347fd301409570fa9b0aed2c9 compiling
/home/wfg/linux

2013-01-11-13:40:13 detecting boot state 3.2.0-rc6-bisect-00344-g1f2e124 #4 ...1...2.....3...4....5......6.78.9....................1011.12..13.............OK .OK .1415.OK .16..OK .17OK .18..OK .19.......OK .20OK .21.OK .22.OK .23OK ..24....................OK .OK 25OK .26..OK .2728.............OK ..29.OK .30.OK .31.OK .32..OK .33...OK .34...OK .OK 3536OK .37.OK .38.......................OK .OK 39OK ..OK 40.41OK .OK .4243.........OK ...44...OK .45.OK .46.OK .47...OK .48..OK .49...OK .50OK .OK 5152.OK .53........................OK 54.OK .55...OK .OK 565758..........OK ..59..OK .60.OK .61.OK .62...OK ..63......OK .64OK .OK 6566.OK .67......................OK 68OK 69OK .OK 70OK 7172..OK ..OK 7374............OK .7576....OK .77.OK .78....OK .7980.....OK .OK 8182OK .83.OK .84.............OK .85.......OK .OK 8687OK .OK 88.89.OK ..OK 9091.......OK ..92..OK ..93..OK .OK .9495...OK .96..OK .97.....OK ..OK 98.OK 99100OK ..101.............OK .102.......OK .OK 103104...OK .105OK .OK 106OK 107108........OK .109...OK .110..OK .OK 111112....OK .113..OK .114....OK SUCCESS
Bisecting: 1912 revisions left to test after this (roughly 11 steps)
[38e5781bbf8e82c1635ea845e0d07b2228a5ac7a] Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-11-13:52:11 38e5781bbf8e82c1635ea845e0d07b2228a5ac7a compiling
2013-01-11-13:52:53 38e5781bbf8e82c1635ea845e0d07b2228a5ac7a SKIP BROKEN BUILD
/usr/bin/make -C source O=/cc/wfg/linux-bisect-x86_64 ARCH=x86_64 distclean
make: Entering directory `/c/wfg/linux'
CLEAN .
CLEAN arch/x86/kernel/cpu
CLEAN arch/x86/kernel
CLEAN arch/x86/vdso
CLEAN arch/x86/lib
CLEAN firmware
CLEAN kernel
CLEAN lib
CLEAN usr
CLEAN Documentation/accounting
CLEAN Documentation/auxdisplay
CLEAN Documentation/connector
CLEAN Documentation/filesystems
CLEAN Documentation/ia64
CLEAN Documentation/laptops
CLEAN Documentation/networking/timestamping
CLEAN Documentation/networking
CLEAN Documentation/pcmcia
CLEAN Documentation/spi
CLEAN Documentation/timers
CLEAN Documentation/vm
CLEAN Documentation/watchdog/src
CLEAN arch/x86/boot/compressed
CLEAN arch/x86/boot
CLEAN .tmp_versions
CLEAN vmlinux System.map .tmp_kallsyms1.S .tmp_kallsyms1.o .tmp_kallsyms2.S .tmp_kallsyms2.o .tmp_vmlinux1 .tmp_vmlinux2 .tmp_System.map
CLEAN scripts/basic
CLEAN scripts/kconfig
CLEAN scripts/mod
CLEAN scripts
CLEAN include/config usr/include include/generated arch/x86/include/generated
CLEAN .config .config.old .version include/linux/version.h Module.symvers
make: Leaving directory `/c/wfg/linux'
Bisecting: 1912 revisions left to test after this (roughly 11 steps)
[b12e2c12da5a35627063f38c51657af56c2162a3] leds: Kconfig: Fix typo 'D2NET_V2'
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-11-13:53:04 b12e2c12da5a35627063f38c51657af56c2162a3 compiling
/home/wfg/linux

2013-01-11-13:54:36 detecting boot state 3.2.0-rc1-bisect-00320-gb12e2c1 #1 ......12......3....4...5....6.......7.8...910............11........1213..OK .OK .14OK 1516OK .17.......OK .OK .18.....OK .OK .19......OK .OK 2021..OK .22......OK .23OK .24..OK 25OK .26...........OK ..27.....OK .28OK .OK 2930OK .31OK .32.OK .33........OK .OK .3435OK ..36..OK .37..OK .OK 3839..OK .40......OK .41OK .42...OK ..OK 4344..............OK .45.....OK .46OK .OK 4748OK .OK 49OK .5051...........OK .OK .52OK ..53..OK .54..OK .OK 55.56.........OK .57OK ..58...OK .OK 59.60.............OK .61.OK .62...OK ..OK 63.OK 64.65OK ..6667..........OK .6869OK .70..OK .7172..OK .OK 7374...........OK .75OK .76..OK .77OK 78..............OK .79.OK .80....OK 81.OK 82OK .83..OK .8485.........OK .OK 86OK .8788...OK .OK 8990..OK .OK .9192......OK 93....OK .OK .OK 949596............OK .97.OK .98.....OK .99.OK .100..OK .101..OK .102103.........OK 104OK .105OK 106....OK .OK .OK 107108..OK .109......OK 110.....OK .OK .111OK 112113...........OK SUCCESS
Bisecting: 1912 revisions left to test after this (roughly 11 steps)
[475f1b52645a29936b9df1d8fcd45f7e56bd4a9f] net: sk_update_clone is only used in net/core/sock.c
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-11-14:05:35 475f1b52645a29936b9df1d8fcd45f7e56bd4a9f compiling
2013-01-11-14:06:23 475f1b52645a29936b9df1d8fcd45f7e56bd4a9f SKIP BROKEN BUILD
/usr/bin/make -C source O=/cc/wfg/linux-bisect-x86_64 ARCH=x86_64 distclean
make: Entering directory `/c/wfg/linux'
CLEAN .
CLEAN arch/x86/kernel/cpu
CLEAN arch/x86/kernel
CLEAN arch/x86/vdso
CLEAN arch/x86/lib
CLEAN firmware
CLEAN kernel
CLEAN lib
CLEAN usr
CLEAN Documentation/accounting
CLEAN Documentation/auxdisplay
CLEAN Documentation/connector
CLEAN Documentation/filesystems
CLEAN Documentation/ia64
CLEAN Documentation/laptops
CLEAN Documentation/networking/timestamping
CLEAN Documentation/networking
CLEAN Documentation/pcmcia
CLEAN Documentation/spi
CLEAN Documentation/timers
CLEAN Documentation/vm
CLEAN Documentation/watchdog/src
CLEAN arch/x86/boot/compressed
CLEAN arch/x86/boot
CLEAN .tmp_versions
CLEAN vmlinux System.map .tmp_kallsyms1.S .tmp_kallsyms1.o .tmp_kallsyms2.S .tmp_kallsyms2.o .tmp_vmlinux1 .tmp_vmlinux2 .tmp_System.map
CLEAN scripts/basic
CLEAN scripts/kconfig
CLEAN scripts/mod
CLEAN scripts
CLEAN include/config usr/include include/generated arch/x86/include/generated
CLEAN .config .config.old .version include/linux/version.h Module.symvers
make: Leaving directory `/c/wfg/linux'
Bisecting: 1912 revisions left to test after this (roughly 11 steps)
[d83b405383c965498923f3561c3321e2b5df5727] USB: serial: add support for multiple read urbs
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-11-14:06:33 d83b405383c965498923f3561c3321e2b5df5727 compiling
/home/wfg/linux

2013-01-11-14:08:07 detecting boot state 3.2.0-rc1-bisect-00038-gd83b405 #1 OK .1.OK .2.......OK .3OK .4...OK .5........OK ...6..OK .7..OK .8.OK ..OK 9OK .1011..............OK .12OK ..13OK .14....OK .OK 1516..OK .17.OK .18.......OK .19OK .20...OK .21......OK .22..OK .23..OK ..24.OK .25.OK .26.OK .OK .2728............OK .OK .2930..OK .31....OK .OK .3233.OK 34..OK .35...OK .36....OK .OK .37.........OK .38..OK .39...OK .40..OK 41..OK .42..OK .OK 4344........OK .45...OK .46..OK .47.....OK .OK 4849.OK .50..OK .51..OK .52.OK .53...OK .54.........OK ..55.....OK .OK 56.57OK .58..OK .OK .5960.......OK .61...OK .62..OK .63......OK .64.OK .OK ..65....OK .66..OK .67..OK 68...OK .69..........OK 70OK .71....OK .72OK .73OK .74...OK .OK .7576......OK .77...OK .78..OK .79......OK ..80..OK ..OK .81.82....OK .83.OK ..84..OK .85..........OK .OK 8687....OK .OK 88.89OK 90....OK ..OK 91.92.....OK .93...OK .94..OK .95......OK .96.OK 97..OK SUCCESS
Bisecting: 1874 revisions left to test after this (roughly 11 steps)
[4dbeccdf7b7573e90b442b6bd896c10c1608e72d] bf54x: get mem size: missing break in switch
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-11-14:17:59 4dbeccdf7b7573e90b442b6bd896c10c1608e72d compiling
2013-01-11-14:18:43 4dbeccdf7b7573e90b442b6bd896c10c1608e72d SKIP BROKEN BUILD
/usr/bin/make -C source O=/cc/wfg/linux-bisect-x86_64 ARCH=x86_64 distclean
make: Entering directory `/c/wfg/linux'
CLEAN .
CLEAN arch/x86/kernel/cpu
CLEAN arch/x86/kernel
CLEAN arch/x86/vdso
CLEAN arch/x86/lib
CLEAN firmware
CLEAN kernel
CLEAN lib
CLEAN usr
CLEAN Documentation/accounting
CLEAN Documentation/auxdisplay
CLEAN Documentation/connector
CLEAN Documentation/filesystems
CLEAN Documentation/ia64
CLEAN Documentation/laptops
CLEAN Documentation/networking/timestamping
CLEAN Documentation/networking
CLEAN Documentation/pcmcia
CLEAN Documentation/spi
CLEAN Documentation/timers
CLEAN Documentation/vm
CLEAN Documentation/watchdog/src
CLEAN arch/x86/boot/compressed
CLEAN arch/x86/boot
CLEAN .tmp_versions
CLEAN vmlinux System.map .tmp_kallsyms1.S .tmp_kallsyms1.o .tmp_kallsyms2.S .tmp_kallsyms2.o .tmp_vmlinux1 .tmp_vmlinux2 .tmp_System.map
CLEAN scripts/basic
CLEAN scripts/kconfig
CLEAN scripts/mod
CLEAN scripts
CLEAN include/config usr/include include/generated arch/x86/include/generated
CLEAN .config .config.old .version include/linux/version.h Module.symvers
make: Leaving directory `/c/wfg/linux'
Bisecting: 1874 revisions left to test after this (roughly 11 steps)
[b17471f5d121a53be1ccf6e0b0599441e56b468c] net: macb: fix build break with !CONFIG_OF
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-11-14:18:54 b17471f5d121a53be1ccf6e0b0599441e56b468c compiling
/home/wfg/linux

2013-01-11-14:20:26 detecting boot state 3.2.0-rc4-bisect-00043-gb17471f #1 OK ...OK .OK 1.2....OK .OK .3.OK 45...OK .6.....OK .7..OK .8OK 9.10..OK .11..OK .12...OK .13..............OK .14....OK .15OK 1617........OK .OK 1819..OK .20...OK .OK .OK 21.22..OK .23....OK .24...OK ..OK 25OK .2627.....OK 28....OK 29...............OK .30....OK .OK 31OK .32........OK 33OK .34.OK .35OK .OK .36...OK .37..OK .38.....OK .39....OK .OK 40OK ..41OK ..42..OK .43...............OK .44OK .45.OK ..OK 46.47............OK .OK 4849.OK .50.OK .5152..OK .53...OK .54....OK ..OK 55.56..OK .OK 57OK .585960...OK .61.............OK .62OK .63OK .64....OK .65.........OK .66OK ..67..OK .68.OK .OK .6970.OK .OK 71.72.......OK .73.OK .74..OK .OK .75OK 76OK .77...OK .78.........OK .79..OK .80OK .81......OK .82.........OK 83..OK .84..OK .85..OK .OK 8687..OK .88........OK .89.OK .90...OK 91.OK .OK 92OK 9394...OK .95........OK .OK .OK SUCCESS
Bisecting: 1897 revisions left to test after this (roughly 11 steps)
[b3a0aa3ae1c0889ffe8abb2e326d5c74c7c9c097] rtc-puv3: solve section mismatch in rtc-puv3.c
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-11-14:29:52 b3a0aa3ae1c0889ffe8abb2e326d5c74c7c9c097 compiling
2013-01-11-14:30:36 b3a0aa3ae1c0889ffe8abb2e326d5c74c7c9c097 SKIP BROKEN BUILD
/usr/bin/make -C source O=/cc/wfg/linux-bisect-x86_64 ARCH=x86_64 distclean
make: Entering directory `/c/wfg/linux'
CLEAN .
CLEAN arch/x86/kernel/cpu
CLEAN arch/x86/kernel
CLEAN arch/x86/vdso
CLEAN arch/x86/lib
CLEAN firmware
CLEAN kernel
CLEAN lib
CLEAN usr
CLEAN Documentation/accounting
CLEAN Documentation/auxdisplay
CLEAN Documentation/connector
CLEAN Documentation/filesystems
CLEAN Documentation/ia64
CLEAN Documentation/laptops
CLEAN Documentation/networking/timestamping
CLEAN Documentation/networking
CLEAN Documentation/pcmcia
CLEAN Documentation/spi
CLEAN Documentation/timers
CLEAN Documentation/vm
CLEAN Documentation/watchdog/src
CLEAN arch/x86/boot/compressed
CLEAN arch/x86/boot
CLEAN .tmp_versions
CLEAN vmlinux System.map .tmp_kallsyms1.S .tmp_kallsyms1.o .tmp_kallsyms2.S .tmp_kallsyms2.o .tmp_vmlinux1 .tmp_vmlinux2 .tmp_System.map
CLEAN scripts/basic
CLEAN scripts/kconfig
CLEAN scripts/mod
CLEAN scripts
CLEAN include/config usr/include include/generated arch/x86/include/generated
CLEAN .config .config.old .version include/linux/version.h Module.symvers
make: Leaving directory `/c/wfg/linux'
Bisecting: 1897 revisions left to test after this (roughly 11 steps)
[1a96571db0a80dbbb935dee26589dd528da0ed06] Enable 32 bit flash support for iMX21ADS board
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-11-14:30:46 1a96571db0a80dbbb935dee26589dd528da0ed06 compiling
/home/wfg/linux

2013-01-11-14:32:18 detecting boot state 3.2.0-rc6-bisect-00004-g1a96571 #1 ......OK .1OK .2.OK .3OK ..4OK .5OK .OK 6.7.............OK .OK .8OK 9.10.............OK .OK 11.12OK .13OK .14.....OK 15OK 1617..............OK .18OK 19.OK .OK 2021OK .22...OK .OK 2324...............OK .OK 25OK .2627.........OK .OK .2829..OK .30OK .31..OK .32OK .3334.............OK .OK 3536.OK .OK .37OK 38.39......OK .OK .4041............OK .42OK .43OK .OK .4445.....OK .46...OK .47..OK .48OK .49....OK .OK 5051OK .52...........OK 53OK .54.OK .55OK .OK 5657.......OK .OK 5859.............OK .OK 60.61OK ..OK 6263....OK .64....OK .65..OK .OK 66.67...OK .OK 6869OK .70...OK .71........OK 72..OK .73OK .OK 7475.......OK 76.OK 77............OK .78.OK .79.OK .OK 8081....OK .82....OK .83..OK .84OK 85....OK ..OK 8687OK .88..OK .89....OK 90..OK .91OK .OK .9293.....OK .94OK .95...........OK .OK 9697.OK .98.....OK .99.....OK .100....OK ..OK SUCCESS
Bisecting: 1893 revisions left to test after this (roughly 11 steps)
[2dfff235918276638875a1d094f061083ccd6de8] input: ambakmi: Enable module alias autogeneration for AMBA drivers
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-11-14:41:43 2dfff235918276638875a1d094f061083ccd6de8 compiling
/home/wfg/linux

2013-01-11-14:43:12 detecting boot state 3.2.0-rc2-bisect-00007-g2dfff23 #2 ..123....4...5..6....7....8...9.10..11....12.......13.14.......15..OK 16.............OK .17..OK .18OK 19...OK .20..OK .21.OK .22...OK .OK 23.24..OK .25..OK .OK 26.27.....OK .28...OK .29OK .30.....OK .31.OK ..32.............OK .33..OK .OK 34.OK 3536.....OK .37.OK .38..OK .39...OK .40OK .41.OK ..42..OK .OK 43OK .4445....OK ..46..OK .47OK .48.OK ..49.....OK .50.............OK 51...OK .52OK .53OK 54.....OK .55.OK .56..OK .57...OK .58OK .59..OK .60..OK .61OK .OK 6263.....OK 64.OK .65OK .66....OK .67.OK .68............OK .69...OK 70....OK 71.OK 72.....OK .73..OK 74..OK .75...OK .76OK .77..OK .78.OK .OK 7980OK .81.....OK .82.OK .83OK .84....OK .85.OK .86........OK .87...OK .88.....OK .89OK .90..OK .OK 9192.........OK .OK 9394OK 95..OK .96..OK ..97..OK ..OK 98.99OK ..100....OK 101.OK ..102...OK .103.OK .104.........OK .105106........OK 107.OK .108..OK 109OK .110.........OK 111OK .112OK 113..OK .114...OK 115...OK SUCCESS
Bisecting: 1893 revisions left to test after this (roughly 11 steps)
[5f7b0569460b7d8d01ca776430a00505a68b7584] unix_diag: Unix inode info NLA
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-11-14:53:43 5f7b0569460b7d8d01ca776430a00505a68b7584 compiling
/home/wfg/linux

2013-01-11-14:55:11 detecting boot state 3.2.0-rc4-bisect-01587-g5f7b056 #3 .....1.2..3.....45.6...7...........8...9..10.11.....12..13....14.15....OK 16......OK .17..OK .OK .1819OK .20.OK .21.......OK .OK .OK 22OK .2324.........OK ..25..OK ..26OK .OK 2728........OK .OK 29.30.....OK .31OK .32...OK .33......OK .34...OK 35OK .36OK 37..OK .38..........OK 39OK .OK 4041........OK .OK .OK 4243.....OK .44....OK .45OK .46.....OK .47OK .48...OK .49.....OK .OK .5051......OK .52OK .5354..........OK .OK 55OK 565758....OK .59.OK .60..OK .61......OK .62....OK .63OK 64......OK 65OK .66....OK .67...OK 68..OK .69.....OK .70OK .71.OK .72........OK .73OK .OK 74.OK 7576OK .77.OK .78.OK .79...........OK .80.OK .81.OK .82OK ..OK 83.84........OK ..OK 8586.....OK .87.....OK .88OK .89.OK .90........OK .91OK .92OK .OK 9394OK 95..OK .96.OK .97...........OK .98.OK .99.OK .100.OK .101OK .102.........OK .OK 103104.OK .105.....OK 106.OK .107OK .108.........OK .109OK .110OK .OK 111OK .112113.OK .114.OK SUCCESS
Bisecting: 1827 revisions left to test after this (roughly 11 steps)
[ecf00475f229fcf06362412ad2d15a3267e354a1] PM / Domains: Introduce "save/restore state" device callbacks
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-11-15:05:31 ecf00475f229fcf06362412ad2d15a3267e354a1 compiling
/home/wfg/linux

2013-01-11-15:07:18 detecting boot state 3.2.0-rc3-bisect-00200-gecf0047 #4 .....1..2.....3...........4.5....6..78...9............1011.12.1314OK .OK 1516..........OK .17...OK .18.OK 19....OK .OK 2021.........OK .22.OK .23..OK .24..OK .25...OK .26.........OK .27OK .28OK 29OK 30.31..OK .32OK .33.....OK ..34..OK .35OK .36....OK .OK .37...........OK .OK 3839......OK 40..OK .41...OK .42..........OK .43OK .44OK 45OK 4647...OK .48OK 49......OK .50...OK .51OK .52.OK ..53.OK 54.......OK ..OK 5556.........OK .OK .57.OK ..5859.............OK .60OK .OK 61OK 626364...OK .65OK .66......OK .67..OK .68OK .69.OK .OK 7071.....OK .72OK 73..........OK .74..OK 75...OK 7677..............OK ..78OK .79.OK .80...OK .81OK ..82..OK .83.OK .84..OK .85OK .OK .86......OK .87OK .88..........OK .89.OK .90..OK .OK 91.92.............OK .93...OK .OK 9495.OK .96....OK .97OK .98..OK .OK .99.....OK .100OK .OK 101102......OK .103OK .104.........OK ..105.OK 106...OK .OK .107108.............OK .109...OK .OK .110111OK .112...OK ..113OK .114..OK SUCCESS
Bisecting: 1827 revisions left to test after this (roughly 11 steps)
[d3bc1fef9389e409a772ea174a5e41a6f93d9b7b] writeback: fix dirtied pages accounting on sub-page writes
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-11-15:18:39 d3bc1fef9389e409a772ea174a5e41a6f93d9b7b compiling
/home/wfg/linux

2013-01-11-15:20:09 detecting boot state 3.2.0-rc6-bisect-00004-gd3bc1fe #5 .1...2.....3.......45...........6.7....8.9.............10.....OK 11OK .12.....OK .13.OK .14...OK .OK 1516....OK .17.........OK .18OK .19..OK 20........OK .OK 2122....OK 23..............OK .24OK .25OK .26..OK .27....OK .OK .2829.....OK .OK .30OK .31..OK .32.........OK .33OK .34..OK 35....OK .36...OK .37....OK 38..............OK .39OK .40OK 41...OK .42.....OK .OK 4344.....OK .OK 4546OK .47..OK .48.........OK .OK 49OK .50...OK 51....OK .52...OK .53.............OK .54OK .55OK .56...OK 57.....OK ..OK 5859.....OK 60..OK .61OK 62.OK .63............OK .64OK ..65..OK .66...OK .67...OK .68...........OK .69OK .OK 70OK .71.........OK .OK 7273...OK .OK .74.....OK .75...........OK .OK 7677.OK .....OK 7879..OK .80..................OK .81..OK .82..........OK .83......OK 8485..OK .86..........OK .87OK 88....OK .OK 8990..OK .91.OK .92.............OK ..93OK .94.........OK ..95....OK .9697.OK .98.........OK .99OK .100....OK .OK 101102103OK .104.......................OK .105OK .106........OK 107...OK 108.OK SUCCESS
Bisecting: 1824 revisions left to test after this (roughly 11 steps)
[269a3eb1bf10a078ede74747a61603693a3f7853] mips: txx9_sram - convert sysdev_class to a regular subsystem
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-11-15:33:03 269a3eb1bf10a078ede74747a61603693a3f7853 compiling
/home/wfg/linux

2013-01-11-15:35:29 detecting boot state 3.2.0-rc1-bisect-00061-g269a3eb #6 ........12.34...........5...6..7.......8..9.....10...11...12.OK .13OK ..14.............OK ..OK 1516..........OK .17......OK .18.OK .19......OK .20.OK .21....OK .22..OK .23...OK .24....OK ..25...........OK .26..OK .27OK .28......OK .29.........OK .OK .30....OK .31.OK .32....OK .33.OK ..34..OK .35..OK .36....OK .37......OK .38..OK 3940...OK .41...OK 42...........OK .43..OK 44......OK 45.OK .46.....OK .47..OK .OK 4849..OK .50....OK ..51.......OK .52..OK .OK 5354...OK 55...OK .56...........OK .57.OK .58.........OK .59OK .60....OK .61..OK 6263..OK .64.OK .65..........OK .OK 6667OK .68OK 69....OK .70...............OK .OK .71OK .72.....OK .73....OK .74.....OK .OK 7576.OK .77..OK .OK 7879...........OK .OK 8081OK .OK 82.83........OK 84.............OK .85OK .86OK 87.........OK 88.OK 89.........OK .OK 9091..OK 92OK .93.OK .94...........OK .OK 95OK .9697......OK .98............OK .99.OK .OK 100101........OK .102OK .103....OK ..104......OK .OK 105106.OK 107...OK 108...........OK .OK 109OK 110111......OK SUCCESS
Bisecting: 1824 revisions left to test after this (roughly 11 steps)
[8e369672af8700299ab372bad9397f230b1d591a] Merge branch 'dma-buf-merge' of git://people.freedesktop.org/~airlied/linux
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-11-15:48:43 8e369672af8700299ab372bad9397f230b1d591a compiling
2013-01-11-15:49:58 8e369672af8700299ab372bad9397f230b1d591a SKIP BROKEN BUILD
/usr/bin/make -C source O=/cc/wfg/linux-bisect-x86_64 ARCH=x86_64 distclean
make: Entering directory `/c/wfg/linux'
CLEAN .
CLEAN arch/x86/kernel/cpu
CLEAN arch/x86/kernel
CLEAN arch/x86/vdso
CLEAN arch/x86/lib
CLEAN firmware
CLEAN kernel
CLEAN lib
CLEAN usr
CLEAN Documentation/accounting
CLEAN Documentation/auxdisplay
CLEAN Documentation/connector
CLEAN Documentation/filesystems
CLEAN Documentation/ia64
CLEAN Documentation/laptops
CLEAN Documentation/networking/timestamping
CLEAN Documentation/networking
CLEAN Documentation/pcmcia
CLEAN Documentation/spi
CLEAN Documentation/timers
CLEAN Documentation/vm
CLEAN Documentation/watchdog/src
CLEAN arch/x86/boot/compressed
CLEAN arch/x86/boot
CLEAN .tmp_versions
CLEAN vmlinux System.map .tmp_kallsyms1.S .tmp_kallsyms1.o .tmp_kallsyms2.S .tmp_kallsyms2.o .tmp_vmlinux1 .tmp_vmlinux2 .tmp_System.map
CLEAN scripts/basic
CLEAN scripts/kconfig
CLEAN scripts/mod
CLEAN scripts
CLEAN include/config usr/include include/generated arch/x86/include/generated
CLEAN .config .config.old .version include/linux/version.h Module.symvers
make: Leaving directory `/c/wfg/linux'
Bisecting: 1824 revisions left to test after this (roughly 11 steps)
[23edb6e71696a5da9c5f3987d22221e12370dbce] [SCSI] mpt2sas: Do not set sas_device->starget to NULL from the slave_destroy callback when all the LUNS have been deleted
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-11-15:50:22 23edb6e71696a5da9c5f3987d22221e12370dbce compiling
/home/wfg/linux

2013-01-11-15:51:57 detecting boot state 3.2.0-rc5-bisect-00056-g23edb6e #1 1....2..3.....4.....56...........7..8...........9.........10..1112....OK .13........OK .14..OK .OK 1516.......OK .17OK .18...OK .19.....OK .OK 20......OK .21..........OK .22........OK .23OK 24OK .OK 252627.........OK .28..OK .2930......OK .31OK .32...OK .33......OK .34..OK .35.OK .36...........OK 37.............OK .38.OK .OK 394041.........OK .OK 4243.OK .44......OK .45OK ..46...OK .47.....OK .OK .48.OK .49..........OK .50.............OK .51..OK ...OK 52.53......OK .54..OK .OK 5556.........OK 57.OK ..OK 5859.....OK .60.OK .61OK .62........OK .63.............OK .64.....OK .65..OK .OK .6667......OK ..OK 6869.......OK .70.OK .71OK .72.....OK 73..OK .OK 7475........OK .76.................OK .77.....OK .78....OK .OK 7980......OK .OK 81OK 8283...OK .84.....OK .85OK 86.....OK .OK 8788OK .89..........OK .90.............OK .91....OK .92....OK .OK .9394.OK .95OK ..96OK ..97.OK .98....OK .OK .99100...OK .101...OK .OK 102103OK .104.............OK .105..........OK 106.........OK 107......OK .108..OK .109OK .110.OK 111.112........OK .OK SUCCESS
Bisecting: 1789 revisions left to test after this (roughly 11 steps)
[c0fdbe149c9d1cab9057c39a10cd609751541cf2] staging:iio: iio_trigger contains defunct owner field. Remove it.
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-11-16:05:07 c0fdbe149c9d1cab9057c39a10cd609751541cf2 compiling
/home/wfg/linux

2013-01-11-16:06:07 detecting boot state 3.2.0-rc5-bisect-00426-gc0fdbe1 #2 ..1...2...3.4.5.6...........789..10...11.............12..........13....OK .14......OK .15..OK .16..OK .17.OK .18OK ..19.OK ..20..........OK .OK .OK 21222324..OK .25........OK ..26............OK .27.....OK 28...OK 29......OK .OK 3031...OK .32OK 33..OK 34............OK .35OK .36OK .OK 37OK 38.39..OK .40........OK .41.........OK .42....OK .43..OK ..44.....OK ..45..OK .46OK 47..OK 48................OK .49OK .OK 5051OK .OK 5253...OK .54.........OK 55.........OK .56.....OK 5758......OK .59..OK .OK .60...OK .61.OK .62............OK .63....OK .OK 6465OK .OK 66.67..OK .68....OK .69.........OK .70.....OK .71.OK ..72..OK 73....OK .74......OK .OK 7576...............OK 77.....OK .OK 7879OK .80OK 81...OK .82....OK .83........OK .84..OK 85......OK .86..OK .87OK .88..OK 89..OK .OK ..90.............OK ..91.....OK .92.OK .93.OK .94OK .95...OK .OK 9697.........OK .98.....OK .99.....OK .OK 100101...OK .102..OK .103...OK .OK 104105.............OK .106.....OK 107108OK .109OK .110........OK .OK 111112.....OK .113....OK SUCCESS
Bisecting: 1756 revisions left to test after this (roughly 11 steps)
[c378ddd53f9b8832a46fd4fec050a97fc2269858] memblock, x86: Make ARCH_DISCARD_MEMBLOCK a config option
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-11-16:18:53 c378ddd53f9b8832a46fd4fec050a97fc2269858 compiling
/home/wfg/linux

2013-01-11-16:20:36 detecting boot state 3.0.0-rc7-bisect-00029-gc378ddd #3 1..2................3.45..6..7.............89........10...11......OK .12...OK .13.OK .OK 1415OK .16....................OK 17OK 18.OK 19.OK .20..OK 21........OK .OK 2223............OK .24.OK .25.......OK .26..OK .OK 27.28...OK .29...............OK .OK 3031OK .32OK ..33..........OK .34....OK .35...........OK .36..OK 37........OK 3839..OK .OK 40OK 4142..OK .43............OK .44.OK .45OK .OK 4647.........OK .48....OK .49...........OK .50..OK .51.......OK ..OK 525354OK .55...OK ..56............OK 57.OK .58OK .59..OK ..OK 6061.........OK 62.....OK .63...........OK 64...OK .65.......OK .66OK .67OK .68....OK .OK 6970...........OK .71.OK .72OK .OK .OK 737475.......OK .76....OK .77...........OK .7879.............OK .80OK .81OK .82OK .83....OK .OK 8485.......OK .86.....OK 8788.OK .89OK .90...OK .91OK .92................OK 93..OK .94..........OK .95OK .96OK .OK 97.98....OK .OK 99100......OK ..101....OK .102103OK ..OK 104105...OK .106.OK 107....................OK .108..OK .109..........OK 110OK 111112...OK 113.....OK .OK 114115.......OK .116.....OK SUCCESS
Bisecting: 1756 revisions left to test after this (roughly 11 steps)
[c607b2ed84929e143d9fb5653c4b5d0109147cde] net: fix compilation with !CONFIG_NET
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-11-16:34:00 c607b2ed84929e143d9fb5653c4b5d0109147cde compiling
/home/wfg/linux

2013-01-11-16:35:33 detecting boot state 3.2.0-rc4-bisect-01602-gc607b2e #4 1.....2................3....4........5.6.7...8..9....10...11........OK .12.OK ..13OK .OK ..1415..OK .16...............OK .17.......OK .18.......OK .19OK .20OK .21..OK .22.OK .23....OK 24...OK 25........OK .26..OK .27..OK .OK 2829..OK .30...............OK .31.......OK .32...OK .33OK .34OK .35..OK .36.OK 37.....OK .38.OK .39........OK .40.OK ..41...OK 4243.OK .4445...............OK 46............OK 47..OK 48.OK 49...OK 5051....OK .52....OK .53..OK .54....OK .55..OK .56......OK .OK ..57OK .58...........OK ..59..........OK 60..OK .61OK .62..OK .63..OK .64.....OK .65OK .66.....OK .67....OK .68...OK 69........OK .7071OK 72............OK .73......OK 74...OK .75...OK .OK .76..OK 77....OK 78....OK .79....OK .80....OK .81..OK .82........OK .83OK 84OK 8586..........OK .87.....OK .88..OK .89.....OK .90..OK .91..OK .92....OK .93.......OK .94.....OK 95.......OK 96......OK .97OK .98OK .99.........OK .100.....OK .OK .101.....OK .102.OK .OK 103.104.....OK .OK 105106.......OK ..107...OK .108109.....OK .110.........OK .111.OK 112.......OK .113..........OK SUCCESS
Bisecting: 1756 revisions left to test after this (roughly 11 steps)
[7037bd803e24d4fdaa87f27456e686aafb061277] unicore32: Use set_current_blocked()
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-11-16:48:59 7037bd803e24d4fdaa87f27456e686aafb061277 compiling
2013-01-11-16:49:43 7037bd803e24d4fdaa87f27456e686aafb061277 SKIP BROKEN BUILD
/usr/bin/make -C source O=/cc/wfg/linux-bisect-x86_64 ARCH=x86_64 distclean
make: Entering directory `/c/wfg/linux'
CLEAN .
CLEAN arch/x86/kernel/cpu
CLEAN arch/x86/kernel
CLEAN arch/x86/vdso
CLEAN arch/x86/lib
CLEAN firmware
CLEAN kernel
CLEAN lib
CLEAN usr
CLEAN Documentation/accounting
CLEAN Documentation/auxdisplay
CLEAN Documentation/connector
CLEAN Documentation/filesystems
CLEAN Documentation/ia64
CLEAN Documentation/laptops
CLEAN Documentation/networking/timestamping
CLEAN Documentation/networking
CLEAN Documentation/pcmcia
CLEAN Documentation/spi
CLEAN Documentation/timers
CLEAN Documentation/vm
CLEAN Documentation/watchdog/src
CLEAN arch/x86/boot/compressed
CLEAN arch/x86/boot
CLEAN .tmp_versions
CLEAN vmlinux System.map .tmp_kallsyms1.S .tmp_kallsyms1.o .tmp_kallsyms2.S .tmp_kallsyms2.o .tmp_vmlinux1 .tmp_vmlinux2 .tmp_System.map
CLEAN scripts/basic
CLEAN scripts/kconfig
CLEAN scripts/mod
CLEAN scripts
CLEAN include/config usr/include include/generated arch/x86/include/generated
CLEAN .config .config.old .version include/linux/version.h Module.symvers
make: Leaving directory `/c/wfg/linux'
Bisecting: 1756 revisions left to test after this (roughly 11 steps)
[a398eaa23e42b73216efbe03dc1d754b2e5d603c] regulator: Export regulator_is_supported_voltage()
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-11-16:49:53 a398eaa23e42b73216efbe03dc1d754b2e5d603c compiling
/home/wfg/linux

2013-01-11-16:51:29 detecting boot state 3.2.0-rc3-bisect-00042-ga398eaa #1 ............12.......3.......45....6....7......89.....10.....OK .11..OK 12..........OK .13............OK .OK 141516.OK .17.......OK .18..OK .OK 1920..OK .21...OK .22.....OK .OK 2324OK .25........OK .26..OK .27..........OK .28.............OK 29OK 3031.OK .32.......OK .33..OK ..OK 34.35.OK ..36.....OK .OK .OK 373839........OK .40..OK .41..........OK 42.............OK .43..OK .OK 4445...........OK 46...OK .47OK .48..OK .49.......OK .OK 5051........OK .52..OK .53.....OK .54.............OK .55..OK .OK 5657.OK .58...........OK .OK .59...OK .OK ..6061OK .62...OK .OK 6364...........OK .OK .65.........OK 66..............OK 67...OK 68OK 6970...........OK .71..OK .72.....OK 73OK 7475OK 76..OK .77OK .78.........OK .7980.......OK .81.............OK .82..OK .OK 83OK .84...........OK .85.OK .86..........OK 8788OK .89..OK .90OK .91.........OK .OK 9293.......OK 94......OK .95.......OK .96.OK .97OK .98..........OK .99..OK .100.....OK .OK .101OK 102103OK .104OK .105....OK .106.....OK .OK 107.108.....OK .109.....OK .110........OK .111...OK .112OK SUCCESS
Bisecting: 1717 revisions left to test after this (roughly 11 steps)
[65c64ce8ee642eb330a4c4d94b664725f2902b44] Partial revert "Basic kernel memory functionality for the Memory Controller"
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-11-17:04:41 65c64ce8ee642eb330a4c4d94b664725f2902b44 compiling
/home/wfg/linux

2013-01-11-17:06:07 detecting boot state 3.2.0-rc4-bisect-01826-g65c64ce #2 1.2.............3...4..5..6..78.9..........10....11....12.....13...........OK .14....OK 15.OK 16.........OK .17..OK .18.....OK .19.OK .20OK .OK 21OK ..22..........OK .2324..OK .25....OK .OK 2627..........OK .28....OK 29.OK 30.........OK .31..OK .32.........OK .33.OK .34.OK .35OK .OK 3637..........OK .OK 3839........OK .OK 4041......OK .42...OK .43OK .44........OK .45...OK .46........OK .47.OK .48.OK .49OK .OK .50...........OK ..51OK .52.OK .53...OK .54......OK 55........OK 56.OK 57.........OK 58...OK .59.........OK .60.OK .61.OK 62..OK 6364.....OK 65..OK .66.....OK .67OK .OK .6869.....OK .70.......OK .71OK .72........OK .73...OK .74........OK .75.OK .76.....OK .77.OK .78.OK .79.....OK .80......OK 81..OK .OK 82.....OK .83........OK .84OK 85.........OK .86...OK .87........OK .88.OK .89.....OK .90OK 91OK .9293...OK .94.....OK .95..OK ..96.OK .97.OK .98........OK .99...OK .100.........OK .OK 101102...........OK 103OK .104.......OK .105OK .106OK .OK 107....OK .108.OK 109........OK 110..OK 111..OK SUCCESS
Bisecting: 1717 revisions left to test after this (roughly 11 steps)
[77e81365e0b7d7479fc444a21cea0cd4def70b45] sched: Clean up domain traversal in select_idle_sibling()
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-11-17:18:41 77e81365e0b7d7479fc444a21cea0cd4def70b45 compiling
/home/wfg/linux

2013-01-11-17:20:09 detecting boot state 3.2.0-rc1-bisect-00321-g77e8136 #3 .............1....23.......4...........56........789.10.....11.....OK .OK .12....OK 13OK .14...........OK .15...OK .OK 1617......OK .18.........OK .19OK .20.......OK 21OK .22.OK 23.OK 24.......OK .25..OK .26..OK .OK 2728....OK .29.......OK 30........OK 31OK 32.......OK .33.........OK .34OK .35..OK .OK 3637.OK 38.....OK .39..OK .40..OK .41..OK .OK .4243.......OK .44...OK .45.......OK .46...OK .47......OK .48..........OK .OK 49OK 50OK .51....OK .52.OK 53...OK .54..OK 55........OK .OK 5657........OK .58...........OK .OK .59......OK .60......OK 61.....OK .62.OK ..63....OK .OK 6465OK ..66.OK .67.....OK .68.OK .69........OK .70..OK .71.........OK 72...OK .73......OK .74....OK .75OK 76.OK .77.....OK .OK 7879OK ..80.....OK .81..OK .82OK .83.OK ..84.......OK .85..OK .86........OK .87..OK .88......OK .89.....OK .OK 9091.OK .92........OK ..OK 9394........OK 95..OK .96.OK 97...OK 98....OK 99.......OK .100........OK 101...OK .102..OK .103......OK .104.OK .105..OK .106.....OK .OK SUCCESS
Bisecting: 1717 revisions left to test after this (roughly 11 steps)
[77271ce4b2c0df0a76ad1cbb6a95b07e1f88c1ea] tracing: Add irq, preempt-count and need resched info to default trace output
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-11-17:32:19 77271ce4b2c0df0a76ad1cbb6a95b07e1f88c1ea compiling
/home/wfg/linux

2013-01-11-17:33:46 detecting boot state 3.2.0-rc1-bisect-00105-g77271ce #4 .....12....3...4.5........6....7...........8.........9........OK .OK 1011.....OK .12.....OK .13OK .14..OK .15..OK .16OK 17OK 1819......OK ..20..OK .21...........OK .22...OK .23......OK 24.....OK .25...OK .26....OK .27...OK .28.OK 29....OK .OK 3031.OK ..OK 32OK 3334..OK .35...OK .36..........OK .37...OK .38......OK .39.....OK .40...OK .41.OK 42....OK .43........OK .44....OK 45OK .46..OK .OK 4748....OK .49...OK 50.......OK 51........OK 52...OK .53.........OK .OK 5455....OK .56OK .57........OK .58...OK .OK 59OK .60.OK .61OK .62....OK .63..OK .64......OK .65.......OK .66...OK .67..........OK .68.OK 69......OK 70.OK .71.......OK .72.OK .73OK .74OK .OK 75...OK .76....OK .77...OK 78..OK .79........OK .80..OK .81..........OK .82OK .83.....OK .84.OK .85.......OK .86.OK .87..OK .88OK .89.OK ..90.......OK .91..OK .OK 9293.......OK .94..OK .95.............OK 96.OK 9798..........OK .99.......OK .100.OK .101OK 102103104OK ..105......OK .106...OK .OK .107108.....OK .109...OK .110............OK SUCCESS
Bisecting: 1717 revisions left to test after this (roughly 11 steps)
[21a2cb565a74bf794d343ce22300c5f6c1568ae1] Merge branch 'char-misc-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-11-17:46:08 21a2cb565a74bf794d343ce22300c5f6c1568ae1 compiling
2013-01-11-17:46:54 21a2cb565a74bf794d343ce22300c5f6c1568ae1 SKIP BROKEN BUILD
/usr/bin/make -C source O=/cc/wfg/linux-bisect-x86_64 ARCH=x86_64 distclean
make: Entering directory `/c/wfg/linux'
CLEAN .
CLEAN arch/x86/kernel/cpu
CLEAN arch/x86/kernel
CLEAN arch/x86/vdso
CLEAN arch/x86/lib
CLEAN firmware
CLEAN kernel
CLEAN lib
CLEAN usr
CLEAN Documentation/accounting
CLEAN Documentation/auxdisplay
CLEAN Documentation/connector
CLEAN Documentation/filesystems
CLEAN Documentation/ia64
CLEAN Documentation/laptops
CLEAN Documentation/networking/timestamping
CLEAN Documentation/networking
CLEAN Documentation/pcmcia
CLEAN Documentation/spi
CLEAN Documentation/timers
CLEAN Documentation/vm
CLEAN Documentation/watchdog/src
CLEAN arch/x86/boot/compressed
CLEAN arch/x86/boot
CLEAN .tmp_versions
CLEAN vmlinux System.map .tmp_kallsyms1.S .tmp_kallsyms1.o .tmp_kallsyms2.S .tmp_kallsyms2.o .tmp_vmlinux1 .tmp_vmlinux2 .tmp_System.map
CLEAN scripts/basic
CLEAN scripts/kconfig
CLEAN scripts/mod
CLEAN scripts
CLEAN include/config usr/include include/generated arch/x86/include/generated
CLEAN .config .config.old .version include/linux/version.h Module.symvers
make: Leaving directory `/c/wfg/linux'
Bisecting: 1717 revisions left to test after this (roughly 11 steps)
[53466710202900ce49e471f480cac11275e1d0c4] jffs2: fix up error handling for insert_inode_locked
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-11-17:47:04 53466710202900ce49e471f480cac11275e1d0c4 compiling
/home/wfg/linux

2013-01-11-17:48:35 detecting boot state 3.2.0-rc7-bisect-00040-g5346671 #1 .1......2..3..................4..5....6...........7...8......9..1011.OK .12OK .13OK .14.....OK .15..OK .16OK .17.................OK .18.OK .19....OK 20..........OK .21..OK 22..........OK .23.OK .24..OK 25.OK 26.OK .27.....OK .28....OK 29.............OK 3031.......OK .32.............OK .OK .33........OK .OK .34OK 3536....OK .37OK .OK .38.....OK .3940..OK .41............OK .OK .4243......OK .44..................OK .45..OK .46..OK 47..OK .48.OK 49OK .50.....OK .OK 51..OK 52....OK .53............OK .54...OK 55...OK .56..................OK .5758OK .59..OK .60..OK .61OK .62....OK .63.OK .64..OK 65OK ..66...........OK .67.......OK 68.......OK .69...............OK .70..OK .71.OK 72...OK .OK 7374....OK .75...OK .76OK .77OK .7879..........OK .80..OK ..81..........OK .82...............OK .8384.......OK .85...OK .OK 8687....OK 88....OK 89OK 90OK 9192.OK 93...........OK .OK 9495..........OK .96...............OK .97...OK .98...OK 99....OK .OK .100101..OK .102...OK .OK .103OK 104105OK 106.107.......OK .108.OK .109.......OK .110...............OK 111....OK 112...........OK .113.....OK 114OK SUCCESS
Bisecting: 1677 revisions left to test after this (roughly 11 steps)
[ddf536d0d7e1f0b63a681c970888730a4437414d] ARM: OMAP: AM3517/3505: fix crash on boot due to incorrect voltagedomain data
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-11-18:02:41 ddf536d0d7e1f0b63a681c970888730a4437414d compiling
/home/wfg/linux

2013-01-11-18:04:07 detecting boot state 3.2.0-rc5-bisect-00006-gddf536d #2 .1..234......5.67.........8.....9....10................11...12............OK 13...OK .14.OK .1516OK .17.OK .1819.OK .20OK ..21......OK .22.....OK 23...OK .24...........OK .25......OK .26...........OK .27..OK .28..OK .29....OK 30OK 31.OK .OK 3233....OK .34.......OK .35....OK .OK 36.......OK .37...........OK 38...........OK ..39..OK .40..OK .41...OK .OK .42.OK .OK 4344....OK .4546......OK .47....OK .48........OK 49..............OK .50....OK 51.......OK 52...OK .53....OK .54.OK .OK 55...OK .56OK .57...OK 58...OK .59...OK .OK .60.......OK .61..............OK .62...OK .63......OK .64..OK .OK .65....OK .66.OK 6768...OK .69OK .70......OK 71....OK 72.OK 7374...........OK .75..........OK 76........OK .77..OK 78....OK .79..OK .80..OK .OK 8182.OK .83..OK 84.OK .85...OK .86.OK .87OK .88.OK .89..........OK .90..........OK .91........OK 92..OK .93........OK .94......OK 95OK 9697....OK .98.OK .99..OK 100.....OK .101.OK 102.......OK .103..........OK 104............OK .105..OK 106....OK .OK .107108....OK .OK .109110OK .111....OK .112OK SUCCESS
Bisecting: 1674 revisions left to test after this (roughly 11 steps)
[64c4e9f8988e6974ee7cae569fa500e7e673837b] arm/tegra: add support for tegra30 based board cardhu
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-11-18:17:09 64c4e9f8988e6974ee7cae569fa500e7e673837b compiling
/home/wfg/linux

2013-01-11-18:18:37 detecting boot state 3.2.0-rc4-bisect-00140-g64c4e9f #3 1....23....4............5..........6.............7..8...9..10....11..OK .12..OK ..OK 1314..OK .15OK .16.OK 17.....OK .18...........OK .19..........OK 20.......OK .21..OK .22......OK .23.OK .24...OK .25..OK ..26..OK .27.OK .OK 28OK .29.....OK .30...........OK .31.....OK .32.......OK .33......OK .34.........OK .35..OK .36OK .37OK .38OK 39.......OK .40.OK .41OK .42.....OK 43....OK 44.............OK .45...OK .46......47OK .48.........OK 49..OK .50OK .51.OK .OK 5253.......OK .54OK ..55OK .56....OK .57...OK .58..............OK 59....OK 60.....OK .61....OK 62.........OK .63..OK 64.OK .65.OK .OK 66....OK .67....OK .68.OK ..OK 69.70..OK .71.............OK .72...OK .73.....OK .74....OK 75.........OK .76..OK .77....OK .78.OK 79OK 80....OK 81.....OK .82..OK 8384OK 8586.............OK .87.......OK .88OK .89....OK .90.........OK .91..OK .92....OK .93OK .OK 94.95...OK .96....OK .97..OK .OK 98OK 99.100............OK .101.......OK .102.OK .103...OK .104.............OK .105....OK 106.....OK .107OK 108OK .109.......OK 110OK .111..OK SUCCESS
Bisecting: 1644 revisions left to test after this (roughly 11 steps)
[9ad1aefc8ae8d2e482b4cc4b7199e2354148bbdc] md/raid10: Handle replacement devices during resync.
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-11-18:31:36 9ad1aefc8ae8d2e482b4cc4b7199e2354148bbdc compiling
/home/wfg/linux

2013-01-11-18:33:03 detecting boot state 3.2.0-rc1-bisect-00038-g9ad1aefc #4 12.3..4............5..67...........8..........910....11....12.....OK .OK 1314......OK .OK 15OK .OK 161718.OK .19...........OK ..20OK .OK .21..........OK .22.........OK 23....OK .24...OK .OK 2526.........OK .OK 2728......OK .OK 29OK 30OK 3132..OK .33.......OK .34..OK ..35.........OK .36............OK .OK 3738...OK .39OK .40.........OK .OK 4142......OK 43..OK .44OK .OK 4546........OK .47...OK .48.............OK .49...........OK .50OK 51..OK 52.OK .53...OK 54........OK 55.....OK .OK 56...OK .OK 5758OK 59........OK .60OK .61............OK .62............OK 63OK .64.OK .65.....OK .66.......OK .67.....OK .68..OK .69...OK 70OK .OK 7172OK .73........OK .74........OK .75.............OK 76.OK .OK 7778.....OK .79.......OK .80.....OK .81..OK .82....OK .OK 83OK 84OK .85........OK ..86.......OK 87.............OK .88.....OK 8990.OK .OK 9192.......OK 93.........OK .94..OK .95.....OK 96OK 97OK .OK 9899.....OK 100...OK 101...OK .102.............OK 103.....OK .OK 104105.OK .OK 106107......OK ..108........OK .109......OK SUCCESS
Bisecting: 1644 revisions left to test after this (roughly 11 steps)
[845501213033d0058945776349f15502823359d8] tile: switch to GENERIC_PCI_IOMAP
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-11-18:45:51 845501213033d0058945776349f15502823359d8 compiling
/home/wfg/linux

2013-01-11-18:47:14 detecting boot state 3.2.0-rc3-bisect-00012-g84550121 #5 .......12.3...45......6...7............8.......9.....10.11......OK .12............OK .13..OK .14..OK 15..OK 16...OK .OK 17.....OK .OK 1819..OK .20.......OK .21......OK .22OK .23...OK .24.......OK 25............OK .26..OK .27..OK .28.OK .29..OK .OK .3031....OK ..32.OK .3334......OK .35....OK .36OK .37..OK ..38.....OK 39...OK .40................OK .41..OK 4243.OK 44........OK .OK 4546....OK .47.OK .OK 4849......OK .50.OK 51.OK 52...OK .53.....OK .54...OK 55.................OK .56.OK 57OK 58.....OK .59....OK .OK 60.....OK .61...OK 62..OK 63.......OK .64OK .65OK .OK 66........OK .OK 67................OK .68.OK .OK 6970.....OK 71.....OK .72....OK ..73..OK .74.OK .75.......OK .76..OK ..OK 7778.......OK .79....................OK .80..OK 8182.....OK .83......OK .84...OK .OK 85......OK .86...OK .87.......OK .OK 8889...OK .9091...................OK .92.OK .OK 9394.....OK .95......OK .96OK 9798..OK 99......OK .100...OK .101........OK 102.OK 103OK .104OK .105.......................OK .OK 106107........OK .108...OK .109OK 110..OK SUCCESS
Bisecting: 1632 revisions left to test after this (roughly 11 steps)
[4145fa7fbee3ec1e61c52825b146192885d9759f] rcu: Deconfuse dynticks entry-exit tracing
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-11-19:00:22 4145fa7fbee3ec1e61c52825b146192885d9759f compiling
/home/wfg/linux

2013-01-11-19:01:47 detecting boot state 3.2.0-rc5-bisect-00026-g4145fa7 #6 ...1...2...3........45...6.....7.89..................OK .10.11..12..OK .13....OK .14.....OK .15............OK .16...OK .17...OK .18OK .OK 19OK 2021.................OK .22OK .OK 23.OK .24...OK 25....OK .26......OK 2728............OK 29...OK .30....OK 31.OK 32OK .OK 3334............OK .35OK .OK .36OK 3738.......OK .39OK 40..........OK 4142........OK .43..OK .44...OK 45....OK 46.OK 47OK .48OK 49.............OK 50.OK .OK 5152OK 53.......OK .54OK .55.........OK .56........OK .57..OK .58...OK .59...OK .60OK .61OK .OK 6263...........OK .OK 6465...OK .66..OK .67.OK 68.............OK .OK 69.........OK 70...OK 71....OK 72....OK .OK 7374OK .75OK 76............OK 77OK .78...OK 79...OK .80OK .81.............OK .82....OK .83..OK 84....OK .85...OK .86OK .87....OK 88OK .89...........OK 90.OK 91...OK 92....OK .OK 9394.............OK .95....OK .96..OK .97....OK 98....OK 99OK .100.OK .101.OK .102............OK .103OK 104...OK .105...OK .106OK .107.............OK .108OK 109110.OK ..111.......OK SUCCESS
Bisecting: 1632 revisions left to test after this (roughly 11 steps)
[e7c8e8605d0bafc705ff27f9da98a1668427cc0f] drivers/usb/class/cdc-acm.c: clear dangling pointer
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-11-19:13:57 e7c8e8605d0bafc705ff27f9da98a1668427cc0f compiling
/home/wfg/linux

2013-01-11-19:15:19 detecting boot state 3.2.0-rc5-bisect-00237-ge7c8e86 #7 ..1....23..4..5........6......78...9.10...................11....OK .12.OK .13........OK .14...OK 15OK .16....OK 17OK .18......OK 19.OK .OK 2021.OK .22....OK 23....OK .24.............OK .25..OK .26OK 27.....OK .28....OK .29..OK .30OK .31..OK ..32OK 33......OK .34OK .OK 3536.OK .37...OK .38....OK .39.............OK 40....OK .41OK .42.......OK .43.OK .44..OK .45.OK 46.OK .47..OK 48..........OK .49.OK 50OK 51...OK .52....OK .53..............OK .54...OK .55OK .56........OK .57OK .58..OK .59.OK 60..OK .61.OK .62............OK .OK 6364.......OK 65....OK .66..............OK .OK 67....OK .68........OK .OK 6970.OK .71....OK .72..OK 73..OK .74........OK .OK 757677.....OK .78....OK .79..............OK 8081....OK .82........OK .OK 8384...........OK 85..OK .86..OK 87.....OK 88....OK .OK 8990.....OK 91OK .92..............OK .OK 93....OK .94.........OK .OK 95.96.........OK .97..OK .98..OK .99....OK .100...OK .OK .OK 101102...OK .103OK .104..........OK .105...OK 106.....OK 107..........OK .OK 108109.OK SUCCESS
Bisecting: 1433 revisions left to test after this (roughly 11 steps)
[c3e0ef9a298e028a82ada28101ccd5cf64d209ee] [S390] fix cputime overflow in uptime_proc_show
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-11-19:27:53 c3e0ef9a298e028a82ada28101ccd5cf64d209ee compiling
/home/wfg/linux

2013-01-11-19:29:23 detecting boot state 3.2.0-rc5-bisect-00054-gc3e0ef9 #8 .......1...2....3..4........56..78........9.......10..........11.....OK .OK 1213OK .14........OK .15..OK .16...OK .17OK .18.......OK .OK 1920..OK .2122.......OK .23.....OK .OK 2425.........OK .26....OK .27...OK .28OK .29....OK .30......OK .31.OK .32.OK 33.......OK 34.OK .35....OK .36...OK .37......OK .38.........OK .39.....OK .40...OK .41OK .42....OK .43......OK .44...OK .45OK .46........OK .47.OK .48....OK .OK 4950.....OK .OK 5152.........OK 53.....OK .54.....OK .55OK .56......OK .57.......OK .OK 58OK 5960........OK .61.....OK .62OK .OK .6364.....OK .OK ..65.......OK .66....OK ..67....OK .68OK .69.......OK 70.........OK 71.OK .72.OK .73....OK 74......OK .75.....OK .OK 76.......OK .OK 77........OK .78....OK .79OK .80.OK 81.......OK .82........OK .83OK .84.OK .85....OK .86.....OK .87......OK .888990.....OK .91.......OK .92.....OK 93.OK 94.....OK .95...OK 96.......OK .OK 9798........OK .99OK .100.....OK .101...OK .102..OK .OK 103104.........OK .OK 105106..OK .107....OK .108OK .109.....OK .110..OK SUCCESS
Bisecting: 1433 revisions left to test after this (roughly 11 steps)
[cf8e019b523a8caa95b56ff0ce62a4856b14395f] hvc_xen: introduce HVC_XEN_FRONTEND
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-11-19:42:03 cf8e019b523a8caa95b56ff0ce62a4856b14395f compiling
/home/wfg/linux

2013-01-11-19:43:35 detecting boot state 3.2.0-bisect-06289-gcf8e019 #9 ... TEST FAILURE
Bisecting: 1430 revisions left to test after this (roughly 11 steps)
[fe76daea9ede24f9f53cb847563c2fa7a50cedf2] ARM: restart: w90x900: use new restart hook
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-11-19:43:46 fe76daea9ede24f9f53cb847563c2fa7a50cedf2 compiling
/home/wfg/linux

2013-01-11-19:45:11 detecting boot state 3.2.0-rc7-bisect-00073-gfe76dae #10 12.................................................................OK .3.OK .4OK 5.OK 67OK 8OK .OK 910.1112......................................................OK .13........OK .OK 14OK 15.OK 16OK 17OK 18.OK 1920.OK .OK 2122.................................................OK 23.........OK .OK 2425OK .OK .26OK 27....OK .OK 28..OK .OK 2930.............................................OK 31.........OK .32OK .33..OK .34....OK .35..OK .OK .363738...............................................OK .39....OK .40...OK 41.OK ..4243OK ..44..OK .45....OK .OK 464748.........................................OK .49.......OK .5051.OK .52..OK .OK 53.5455..OK .56OK .OK .OK .OK 57585960.......................................OK .61.............OK 6263..OK 6465OK .OK 6667.OK .OK .68...OK .69.OK .70OK .OK 71OK .72..................................OK .73............OK .OK .74.OK .OK 75.....OK 76OK .77..OK .78...OK .79.OK 80.OK .81OK 82..................................OK .83..........OK .84.OK .85....OK .OK 8687...OK ..88OK .89OK .90..OK .91OK .92..................................OK .93.....OK .94...OK .95....OK .OK 96....OK 9798OK 99.....OK 100.OK 101OK .OK 102.....OK .103.................................OK .104..OK SUCCESS
Bisecting: 1423 revisions left to test after this (roughly 11 steps)
[8ded9709a171a52199c5ac64912c52f7290870a0] blackfin: bf537: change num_chipselect for spi-sport
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-11-20:02:21 8ded9709a171a52199c5ac64912c52f7290870a0 compiling
2013-01-11-20:03:14 8ded9709a171a52199c5ac64912c52f7290870a0 SKIP BROKEN BUILD
/usr/bin/make -C source O=/cc/wfg/linux-bisect-x86_64 ARCH=x86_64 distclean
make: Entering directory `/c/wfg/linux'
CLEAN .
CLEAN arch/x86/kernel/cpu
CLEAN arch/x86/kernel
CLEAN arch/x86/vdso
CLEAN arch/x86/lib
CLEAN firmware
CLEAN kernel
CLEAN lib
CLEAN usr
CLEAN Documentation/accounting
CLEAN Documentation/auxdisplay
CLEAN Documentation/connector
CLEAN Documentation/filesystems
CLEAN Documentation/ia64
CLEAN Documentation/laptops
CLEAN Documentation/networking/timestamping
CLEAN Documentation/networking
CLEAN Documentation/pcmcia
CLEAN Documentation/spi
CLEAN Documentation/timers
CLEAN Documentation/vm
CLEAN Documentation/watchdog/src
CLEAN arch/x86/boot/compressed
CLEAN arch/x86/boot
CLEAN .tmp_versions
CLEAN vmlinux System.map .tmp_kallsyms1.S .tmp_kallsyms1.o .tmp_kallsyms2.S .tmp_kallsyms2.o .tmp_vmlinux1 .tmp_vmlinux2 .tmp_System.map
CLEAN scripts/basic
CLEAN scripts/kconfig
CLEAN scripts/mod
CLEAN scripts
CLEAN include/config usr/include include/generated arch/x86/include/generated
CLEAN .config .config.old .version include/linux/version.h Module.symvers
make: Leaving directory `/c/wfg/linux'
Bisecting: 1423 revisions left to test after this (roughly 11 steps)
[bb74041b1367b4935b8284a2b541f5e4365d3f50] TTY: Remove redundant spi driver bus initialization
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-11-20:03:26 bb74041b1367b4935b8284a2b541f5e4365d3f50 compiling
/home/wfg/linux

2013-01-11-20:05:00 detecting boot state 3.2.0-rc3-bisect-00031-gbb74041 #1 ..................1...2......3.....4.5....678.9...10.11....12...13.............................OK .14.....OK .15......OK .16OK .17OK .18...OK .19OK .20OK ...21OK .22OK .23...OK .24..OK .25.............................OK .OK 26..OK 27..............OK .28OK .29OK .30....OK 31OK 32...OK .33OK .34OK .35...OK 3637.............................OK .38.OK .39..............OK .40OK .41OK .42...OK .OK 43OK 4445..OK ..OK 4647.OK .48.OK ..49..OK .50.........................OK 5152.OK .53..............OK .54..OK 55.OK .56..OK .57OK .OK 5859OK ..60..OK .OK 6162.OK .63..OK ..64...................OK .65..OK .66.OK ...67.............OK .68.OK .69.....OK 70...OK .71OK 72OK .73OK .74..OK .OK 75...OK .76...OK .77..............OK .78...OK 79...OK .80.............OK .81.OK .82.....OK .83...OK 84OK 85OK ..86OK .87.OK .OK 8889...OK .90...OK .91..........OK .92......OK .93.......OK 94.........OK 95OK .96............OK 97...OK 98OK 99100......OK .OK 101102..OK .103...OK .104......OK .105.......OK 106.......OK ..107.......OK .108OK 109...........OK .110...OK 111OK 112OK .113.........OK SUCCESS
Bisecting: 1379 revisions left to test after this (roughly 11 steps)
[12e55508921865aefdd80fd17afe70c191afbd1b] Merge branch 'staging-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-11-20:18:51 12e55508921865aefdd80fd17afe70c191afbd1b compiling
2013-01-11-20:19:35 12e55508921865aefdd80fd17afe70c191afbd1b SKIP BROKEN BUILD
/usr/bin/make -C source O=/cc/wfg/linux-bisect-x86_64 ARCH=x86_64 distclean
make: Entering directory `/c/wfg/linux'
CLEAN .
CLEAN arch/x86/kernel/cpu
CLEAN arch/x86/kernel
CLEAN arch/x86/vdso
CLEAN arch/x86/lib
CLEAN firmware
CLEAN kernel
CLEAN lib
CLEAN usr
CLEAN Documentation/accounting
CLEAN Documentation/auxdisplay
CLEAN Documentation/connector
CLEAN Documentation/filesystems
CLEAN Documentation/ia64
CLEAN Documentation/laptops
CLEAN Documentation/networking/timestamping
CLEAN Documentation/networking
CLEAN Documentation/pcmcia
CLEAN Documentation/spi
CLEAN Documentation/timers
CLEAN Documentation/vm
CLEAN Documentation/watchdog/src
CLEAN arch/x86/boot/compressed
CLEAN arch/x86/boot
CLEAN .tmp_versions
CLEAN vmlinux System.map .tmp_kallsyms1.S .tmp_kallsyms1.o .tmp_kallsyms2.S .tmp_kallsyms2.o .tmp_vmlinux1 .tmp_vmlinux2 .tmp_System.map
CLEAN scripts/basic
CLEAN scripts/kconfig
CLEAN scripts/mod
CLEAN scripts
CLEAN include/config usr/include include/generated arch/x86/include/generated
CLEAN .config .config.old .version include/linux/version.h Module.symvers
make: Leaving directory `/c/wfg/linux'
Bisecting: 1379 revisions left to test after this (roughly 11 steps)
[c909e99364c8b6ca07864d752950b6b4ecf6bef4] vmscan: activate executable pages after first usage
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-11-20:19:43 c909e99364c8b6ca07864d752950b6b4ecf6bef4 compiling
2013-01-11-20:20:26 c909e99364c8b6ca07864d752950b6b4ecf6bef4 SKIP BROKEN BUILD
/usr/bin/make -C source O=/cc/wfg/linux-bisect-x86_64 ARCH=x86_64 distclean
make: Entering directory `/c/wfg/linux'
CLEAN .
CLEAN arch/x86/kernel/cpu
CLEAN arch/x86/kernel
CLEAN arch/x86/vdso
CLEAN arch/x86/lib
CLEAN firmware
CLEAN kernel
CLEAN lib
CLEAN usr
CLEAN .tmp_versions
CLEAN scripts/basic
CLEAN scripts/kconfig
CLEAN scripts/mod
CLEAN scripts
CLEAN include/config include/generated arch/x86/include/generated
CLEAN .config .config.old .version include/linux/version.h
make: Leaving directory `/c/wfg/linux'
Bisecting: 1379 revisions left to test after this (roughly 11 steps)
[b890f4c363ebdc9c38d7f1ec91e9ec0976c4fb6a] wl12xx: stop device role on remove_interface
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-11-20:20:35 b890f4c363ebdc9c38d7f1ec91e9ec0976c4fb6a compiling
/home/wfg/linux

2013-01-11-20:22:02 detecting boot state 3.2.0-rc2-bisect-01255-gb890f4c #1 OK ....OK 12...........OK 3.....OK .4............OK .OK 56..........OK .OK 7OK 8OK 9OK .1011.OK 12......OK .13.OK .OK 1415......OK .OK 1617..........OK .18.....OK 19............OK .20OK 21...........OK 22OK .23.OK 2425OK 26OK .27.....OK .28..OK .29...OK .30......OK ..31......OK 32.....OK .33...........OK .34OK 35...........OK 36OK .37.OK .OK 38OK .OK 3940..........OK .41......OK .42....OK .43.OK .44......OK .45....OK ..46.......OK 47OK .48..........OK .49OK .50OK .OK .51OK 52OK 5354.........OK ..55.....OK .56....OK .57..OK .58..........OK 59.OK .60...........OK .61OK 62...........OK 63OK 64OK 65OK 66OK 67...........OK 6869.....OK 70........OK .OK .71........OK ..72OK ..73..........OK .74OK 75..........OK .OK 76OK 77OK 78OK 79OK 8081..........OK .OK .82.......OK .83.....OK .OK .84........OK .85.OK .86...............OK 87OK .88......OK .89OK 9091.OK .92..OK .9394......OK ..95......OK .96......OK ..97.......OK .98.OK .99..............OK SUCCESS
Bisecting: 1379 revisions left to test after this (roughly 11 steps)
[b5b4f2881f619460fdb165111bac10a3dd8eebee] ARM: OMAP4: PM: Program CPU1 to hit OFF when off-lined
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-11-20:33:51 b5b4f2881f619460fdb165111bac10a3dd8eebee compiling
/home/wfg/linux

2013-01-11-20:35:15 detecting boot state 3.2.0-rc4-bisect-00094-gb5b4f28 #2 ....12......3.......4.....56........78..........910.......11.12....................OK .OK 1314..OK .15.........OK .OK 1617OK .18...OK 19........OK .OK 2021......OK .22..OK 23.......OK .24.OK 25................OK .OK 2627..OK .28.........OK .OK 2930OK .31..OK .32........OK .OK 33OK .34.........OK 35...OK 36...OK .37OK .38.................OK 39..OK 40OK .41......OK .42.OK .43...OK .44OK .45..OK .46.....OK 47OK .4849.......OK .50..OK .51..OK .52OK .53.................OK .54.OK .55....OK .56..OK .57.....OK 58..OK 59.OK 60.....OK 61....OK 62OK .63OK .64OK .65..........OK .66OK .67.....................OK .68.OK .69OK .70..OK .71....OK .72.OK .73OK .74....OK .75...OK .OK 7677OK .78OK .79...........OK .OK .8081....................OK 82...OK 83....OK .84..OK 85OK .86OK 87....OK 88........OK .OK 8990OK 91...OK .92OK .93..........OK .OK 9495...................OK .96...OK 97....OK .98.OK .OK 99OK 100101.....OK .102.......OK .OK 103104...OK .105.OK 106.OK .107.........OK 108OK 109...................OK 110...OK .111........OK SUCCESS
Bisecting: 1367 revisions left to test after this (roughly 11 steps)
[743eb868657bdb1b26c7b24077ca21c67c82c777] perf tools: Resolve machine earlier and pass it to perf_event_ops
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-11-20:48:11 743eb868657bdb1b26c7b24077ca21c67c82c777 compiling
/home/wfg/linux

2013-01-11-20:49:37 detecting boot state 3.2.0-rc1-bisect-00131-g743eb86 #3 .1.2.3..45.............6....78.9...10....11..12................13...OK .14.......OK .15OK .16OK .17.OK .18OK .19...........OK ..20...OK .OK 21.OK 22...OK .23...OK .24.OK .25...................OK 26OK 27........OK 28...OK 29OK .OK 3031OK .32............OK .OK 3334..OK .35...OK .36OK ..37...OK .38.OK 39...................OK .OK 4041.......OK .42..OK .43OK .OK 4445OK .46.........OK 47...OK .48..OK .49......OK .OK 5051.OK .52.OK 53.OK 54.................OK .OK 5556........OK .57..OK .58.OK .59OK .60..OK .61....OK .62...OK .63..OK .64......OK .OK 6566.OK .67OK .68OK .69.................OK .OK 7071........OK 72..OK .OK 73....OK 74...OK .75........OK 76...OK .77..OK .78......OK .OK 7980.OK .81.OK .82OK .83.............OK .OK 8485.......OK .86.OK .OK .87...OK .88..OK .89........OK .90..OK .91...OK 92.......OK .OK 9394.OK 95.OK .96.OK .97............OK .OK 9899........OK 100101..OK .102..OK .103..OK .104........OK .105..OK .106...OK .107......OK .OK 108109.OK 110.OK SUCCESS
Bisecting: 1367 revisions left to test after this (roughly 11 steps)
[00e929808a1cb410f45a620c0fc79d8d0a2506b1] Merge branch 'highbank/devel' into next/devel
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-11-21:01:27 00e929808a1cb410f45a620c0fc79d8d0a2506b1 compiling
/home/wfg/linux

2013-01-11-21:03:02 detecting boot state 3.2.0-rc4-bisect-00016-g00e9298 #4 .............12.........3...4..5....6............7....8.......OK .910OK .11..OK .12OK .13............OK .14OK .15...........OK .OK .16.OK 17.......OK .18............OK 19....OK 20OK 2122...OK .OK 2324...OK 25.OK .26............OK .OK 27.28...........OK .OK .29OK 3031......OK .32............OK .33...OK .OK 34OK 3536..OK .37OK .38..OK .39.OK .40............OK .OK 4142..............OK .OK 4344OK .45........OK .46............OK .47.OK .48OK .OK 4950OK 5152...OK .53.OK ..54...........OK 55OK .56.............OK .OK 575859OK 60.........OK 61............OK .62......OK 63.OK .OK 64OK 6566...OK .67..OK .68........OK .69.OK .70..............OK .OK 71OK 72OK .73.....OK ..74..........OK .75......OK .76OK .OK 77OK 787980......OK .OK 8182........OK 83.....OK .84...........OK 85.OK .OK 8687.OK 88...............OK .89......OK 90.OK .OK 91OK 92OK 9394......OK .95...OK .96....OK .97....OK .98...........OK .99OK .OK .100101OK .102...............OK 103......OK .104..OK 105.OK .OK 106107OK .108.......OK .OK 109110.......OK SUCCESS
Bisecting: 1355 revisions left to test after this (roughly 10 steps)
[25b48ff852e2e71b0d44d8ee6f69c9b704bd5070] C6X: fix timer64 initialization
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-11-21:15:57 25b48ff852e2e71b0d44d8ee6f69c9b704bd5070 compiling
/home/wfg/linux

2013-01-11-21:17:41 detecting boot state 3.1.0-rc9-bisect-00046-g25b48ff #5 1..2...............3.........4..56.............7..8.........OK .9..........OK 10OK 1112OK .13OK .14.........OK .15............OK .16OK .OK 17OK .18........OK .19..OK .20.OK .21.............OK ..22........OK .OK 23OK 2425OK 2627......OK .28.............OK 29OK .30.OK .31..OK .32.......OK .OK .3334OK .35.............OK .36.........OK .37OK 3839OK 4041......OK 42.............OK 43.OK 44.OK 45OK 46..OK .47.........OK 48.OK .49OK .50............OK .51.........OK 52.OK .OK 53OK 545556........OK .57........OK .58OK .59OK .OK 6061..OK .62........OK .63.OK .64OK .65........OK .66............OK .67..OK 68.OK 69OK .70OK .71.....OK .72........OK .73OK 74.OK .75...OK .76...........OK 77OK 78...OK .79........OK .80.........OK .81.OK .82OK .OK 8384.OK 85.....OK .86........OK .OK 8788.OK 89....OK .90............OK .91.OK .92OK .93........OK 94............OK .95OK 96.OK .97OK .OK 9899....OK 100.........OK 101OK .102OK .103...OK .OK .104............OK 105..OK .106OK .107.......OK .108.........OK .109.OK .110..OK SUCCESS
Bisecting: 1329 revisions left to test after this (roughly 10 steps)
[9b467e6ebebbe75288aeb7e816ffbb5d35d6eaa3] reiserfs: don't lock root inode searching
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-11-21:30:23 9b467e6ebebbe75288aeb7e816ffbb5d35d6eaa3 compiling
2013-01-11-21:31:17 9b467e6ebebbe75288aeb7e816ffbb5d35d6eaa3 SKIP BROKEN BUILD
/usr/bin/make -C source O=/cc/wfg/linux-bisect-x86_64 ARCH=x86_64 distclean
make: Entering directory `/c/wfg/linux'
CLEAN .
CLEAN arch/x86/kernel/cpu
CLEAN arch/x86/kernel
CLEAN arch/x86/vdso
CLEAN arch/x86/lib
CLEAN firmware
CLEAN kernel
CLEAN lib
CLEAN usr
CLEAN Documentation/accounting
CLEAN Documentation/auxdisplay
CLEAN Documentation/connector
CLEAN Documentation/filesystems
CLEAN Documentation/ia64
CLEAN Documentation/laptops
CLEAN Documentation/networking/timestamping
CLEAN Documentation/networking
CLEAN Documentation/pcmcia
CLEAN Documentation/spi
CLEAN Documentation/timers
CLEAN Documentation/vm
CLEAN Documentation/watchdog/src
CLEAN arch/x86/boot/compressed
CLEAN arch/x86/boot
CLEAN .tmp_versions
CLEAN vmlinux System.map .tmp_kallsyms1.S .tmp_kallsyms1.o .tmp_kallsyms2.S .tmp_kallsyms2.o .tmp_vmlinux1 .tmp_vmlinux2 .tmp_System.map
CLEAN scripts/basic
CLEAN scripts/kconfig
CLEAN scripts/mod
CLEAN scripts
CLEAN include/config usr/include include/generated arch/x86/include/generated
CLEAN .config .config.old .version include/linux/version.h Module.symvers
make: Leaving directory `/c/wfg/linux'
Bisecting: 1329 revisions left to test after this (roughly 10 steps)
[79f1ddd06471b094ae30eb17b33beb9f1234ca93] x86: Use the same node_distance for 32 and 64-bit
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-11-21:31:48 79f1ddd06471b094ae30eb17b33beb9f1234ca93 compiling
/home/wfg/linux

2013-01-11-21:33:30 detecting boot state 3.2.0-rc4-bisect-00169-g79f1ddd #1 ....12.....3.........4..5....6..........789....10.............11OK .12..OK .OK .1314OK .15....OK .16OK .17....OK .18........OK .19.OK .20...OK 21..........OK 22....OK .OK 23OK 24..........OK .25.....OK 26....OK .27OK .OK 2829......OK .30OK .31OK .32.......OK .33.OK .34..OK ..35........OK .36....OK .OK 373839.........OK .40.....OK .41OK .OK 4243....OK .44......OK 45....OK .46.OK 47....OK 48..OK 49....OK .50.............OK 51.OK .52..OK 53OK .54.....OK .55....OK .56...OK .57OK .58.OK .59.....OK .60....OK .61OK .62...OK .63.OK .OK .6465................OK .66.OK .67.OK 68....OK .69......OK .OK 7071.....OK .72OK 73....OK .74......OK 75..OK .76OK .77......OK 78..OK .OK 7980.............OK .OK 8182....OK 83...OK 84.......OK 85OK .86.....OK .OK 87.88...OK .89.....OK .90..OK .91OK .92.....OK .93..OK .OK 9495.............OK 96OK 97....OK 98...OK .99.......OK .100.OK .101......OK .102OK .103...OK .104.....OK ..105.OK .106OK .107.OK .108..OK .OK 109110.............OK SUCCESS
Bisecting: 1329 revisions left to test after this (roughly 10 steps)
[f95a34c66554235b70a681fcd9feebc195f7ec0e] dlm: move recovery barrier calls
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-11-21:45:25 f95a34c66554235b70a681fcd9feebc195f7ec0e compiling
/home/wfg/linux

2013-01-11-21:47:04 detecting boot state 3.1.0-bisect-00002-gf95a34c #2 ........1..2.......3......45......67..8.....9............1011.12......OK .13............OK 14......OK 15....OK 16.....OK .17..OK .OK 18......OK .OK 1920.......OK .21.......OK .22OK .OK 2324......OK .25...........OK .26......OK 27....OK .28....OK .29...OK ..30.OK .31..OK .3233...OK .34..OK 35.........OK .OK 36OK 3738.....OK .39............OK 40......OK 41OK 42.............OK .43OK .44..OK .45.OK .46..OK .OK 4748...OK .49..OK ..50...OK .OK 51OK 5253.....OK .54............OK .55....OK .56OK 57..............OK 58OK .59......OK .60.OK .61...OK .OK 62OK 63...OK .64.......OK .65OK .6667OK .68............OK .69....OK .70OK 71.............OK .72OK .73......OK .74.OK .75...OK .OK 7677.OK .OK 7879........OK .80OK 8182.OK 83.............OK 84.....OK 85OK 86..............OK 87.OK 88......OK .89.OK .90...OK .91OK 92..OK .OK 9394.......OK .95OK .OK 9697OK .98........OK .99........OK 100OK .101.............OK .102OK .103......OK .104.....OK 105....OK 106OK .107..OK 108OK 109........OK .OK 110OK 111OK SUCCESS
Bisecting: 1327 revisions left to test after this (roughly 10 steps)
[2174f6df7891fa331800beb72634c969f017900b] pstore: gracefully handle NULL pstore_info functions
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-11-21:59:29 2174f6df7891fa331800beb72634c969f017900b compiling
/home/wfg/linux

2013-01-11-22:01:20 detecting boot state 3.2.0-rc2-bisect-00003-g2174f6d #3 ............1..2..........3......4.5..6.7..8..........910....11......OK .OK 1213OK 14..............OK .15OK .16..........OK .17....OK .18.OK 19.OK .20.OK .21OK .22.......OK 23.OK ..24..OK 25.....OK 26....OK 27....OK .28.........OK .29.....OK 30...........OK 31.....OK .OK 32OK 3334OK 35.OK .36...........OK .37.OK 38...OK .39OK .40...OK .41...OK .42.........OK .43....OK .44..........OK .45......OK 46OK 47OK .OK 48.OK .49..............OK .50.OK .51.....OK .52..OK .53....OK .54.....OK .55...OK .56...........OK 57......OK .OK 5859OK .60.OK .61..............OK .62.OK .63....OK .OK 6465..OK .66....OK .67....OK .68....OK .69..........OK .70.....OK .OK 7172OK .73...OK .74.OK 75..........OK .76..OK 77.....OK .78..OK .OK .79........OK .80OK .81....OK .82..........OK .83.....OK .OK 8485OK .86..OK .87.OK .88..........OK .89..OK 90.OK .OK 9192..OK .93..OK .94........OK 95OK .96.....OK .97..........OK .98....OK 99OK 100OK .101....OK .102.OK .103..........OK .104.OK .105OK .106OK .107..OK 108...OK SUCCESS
Bisecting: 1327 revisions left to test after this (roughly 10 steps)
[3c8276c6bc912025db50ff7e93af6bc7c3de0c8c] arm/imx6: add imx6q sabrelite board support
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-11-22:13:46 3c8276c6bc912025db50ff7e93af6bc7c3de0c8c compiling
/home/wfg/linux

2013-01-11-22:15:26 detecting boot state 3.2.0-rc5-bisect-00003-g3c8276c #4 1....2......3...........4..56.7.....89..............10.11.12..13..OK .14....OK 15....OK .16...OK .17.........OK 18.......OK 19...OK 20OK .21OK 22.....OK .23.OK 24...........OK 25OK .26OK .27..OK .28.OK .29........OK .OK 3031...OK .32.........OK .33......OK .34..OK .35OK .OK 3637....OK .38.OK .39..............OK .40OK 41OK .42......OK 43.....OK .44...OK .OK 4546............OK .47.......OK .48OK .49...OK .50OK .51.....OK .52..........OK 53OK .54OK .55.....OK .56....OK .57...OK .OK 5859............OK .60.......OK .61...OK .62OK .63OK 64.....OK 65..........OK .66OK .67OK 68...OK .69.OK .70.....OK 71....OK .72.............OK ..73......OK .7475...OK .OK 76OK 7778.....OK .79..........OK 80OK .81OK .82...OK 83..OK .84.....OK .85....OK 86..OK .87..........OK 88........OK 89...OK 90..OK .OK 9192OK 93.......OK .94.....OK .95OK .96OK .97......OK .98..OK .99OK .100....OK .101..OK .102.........OK .103.......OK .104......OK 105OK 106OK 107108......OK .109......OK 110.OK 111OK .112.......OK 113...OK 114.OK SUCCESS
Bisecting: 1324 revisions left to test after this (roughly 10 steps)
[381345652fca688aeaa967c231e5075cf68d05b6] mtd: do not use mtd->lock, unlock and is_locked directly
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-11-22:27:50 381345652fca688aeaa967c231e5075cf68d05b6 compiling
/home/wfg/linux

2013-01-11-22:29:43 detecting boot state 3.2.0-rc7-bisect-00108-g3813456 #5 .1.........2........3.4.5.......6..7.8.9.......10....11.12.13.........OK .14.....OK .15.........OK .16.......OK 17.OK .OK 181920......OK .21.OK .22OK 23OK ..24......OK 25....OK .26OK .27...........OK .28.OK .29............OK .30..........OK .OK 3132...OK 33.OK .34....OK 35.OK .36OK .37....OK .38....OK .39OK 4041..........OK .42.OK .43.............OK .44..........OK 45OK .46..OK .47.OK .48...OK .49.OK .50OK .51...OK .52.....OK .53..OK .54OK .55......OK .56.....OK .57.........OK .58.........OK .OK 5960...OK .61OK 6263....OK 64.OK .65OK .66....OK .67....OK .68...OK 69OK .70......OK .71.OK .72.................OK .73...OK 74.....OK .75..OK .OK 7677OK .78...OK .79OK 80....OK 81....OK .82.....OK .83....OK .84.OK .85..OK .86................OK .87...OK 88.....OK .89..OK .OK 9091OK .92...OK .93OK 94....OK .95...OK .96.....OK .97...OK 98OK .99..OK .100.OK .101.................OK 102...OK .103.........OK .104...OK .OK 105106.OK .107.OK .108.OK .109...OK .110.....OK 111...OK .112OK .113.OK .114.OK ..115................OK SUCCESS
Bisecting: 1300 revisions left to test after this (roughly 10 steps)
[1fc3eb81100c3f3cd44e706e54390151b0f1ce74] Merge branch 'imx/board' into next/boards
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-11-22:42:26 1fc3eb81100c3f3cd44e706e54390151b0f1ce74 compiling
/home/wfg/linux

2013-01-11-22:44:08 detecting boot state 3.2.0-rc6-bisect-00178-g1fc3eb8 #6 .........1234...5.......67............8..9.10.11.12.............OK .13..OK .14..............OK .OK 1516...OK .OK 17OK 18..OK .19......OK .OK 2021...........OK .OK 2223.OK .24.OK .25.OK .26........OK .27..OK .28...........OK .29.OK .30.....OK .OK 3132..OK .33..........OK .OK 3435.......OK .36...OK .37OK .OK 3839OK 40.........OK .41..OK .42.......OK .43.....OK .44.....OK 4546..OK 47OK .48..........OK .OK 4950.......OK .51..OK .52.OK .OK 53OK .5455........OK .56..OK .57......OK .58......OK 59.....OK .60..OK 61.OK 62.OK .63........OK .64.OK .65........OK .OK 6667.OK .OK 6869...OK .70...OK .71..OK ..72.....OK .73.....OK .74.....OK 75..OK .76OK .77OK .78............OK 79OK .80.......OK .81..OK .OK 8283...OK .84..OK ..85...OK 86...OK ..87.OK 88..OK .89.............OK .90..OK 91.OK .92OK .93............OK .OK 9495.......OK 96...OK .OK 9798...OK .99...OK .100...OK 101OK .102....OK ..103..OK .104............OK .105.OK .106.OK .107OK .108.........OK .109.OK 110.........OK 111...OK SUCCESS
Bisecting: 1294 revisions left to test after this (roughly 10 steps)
[c196adf87514560f867492978ae350d4bbced0bd] HID: usbkbd: synchronize LED URB submission
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-11-22:56:17 c196adf87514560f867492978ae350d4bbced0bd compiling
/home/wfg/linux

2013-01-11-22:57:59 detecting boot state 3.1.0-bisect-08913-gc196adf #7 ..12.....345.......6.............7...89.10...........11..12........OK 13...OK .14OK .15.......OK .OK .16....OK .OK 17OK ..18.....OK .19............OK .OK .2021...OK .22..........OK .23OK .24........OK .25.OK 26.OK 27...........OK .28....OK .29.OK .3031...OK .32.........OK .33..OK .34OK 35....OK .36..OK .37....OK ..38...........OK .39OK .40OK .41...........OK ..42..OK .OK .4344OK .45....OK .46.........OK .47..OK 48OK .49....OK .50..OK .51....OK ..52...........OK .53OK .54OK .55............OK .56...OK .OK 5758OK .59....OK ..60........OK .OK 6162OK .63.....OK .64......OK .65.OK ..66......OK .OK 6768....OK .69..............OK .OK 707172OK .73..OK .74....OK ..75........OK .OK 7677OK .78.....OK .79......OK .80..OK .81......OK .OK 8283...OK .84............OK .85.OK .8687.OK .88.OK .89......OK .90........OK .OK 91OK 92.93.OK .94......OK .95......OK 96.......OK .9798...OK .99............OK .100OK .OK .101102OK .103.OK .104......OK .105........OK .OK 106OK 107OK 108109.OK .110..............OK .111...OK .112..OK .OK SUCCESS
Bisecting: 1284 revisions left to test after this (roughly 10 steps)
[55ba70c40661b61f98c4188c428f265009af1aa5] drm/radeon: use after free in radeon_vm_bo_add()
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-11-23:10:47 55ba70c40661b61f98c4188c428f265009af1aa5 compiling
/home/wfg/linux

2013-01-11-23:12:23 detecting boot state 3.2.0-rc6-bisect-00363-g55ba70c #8 ......1....2..3..4......5.......6.....7...8.9.1011................12...OK .13....OK ..14.....OK .15...OK .16.OK 17..OK .18......OK .19.....OK .20....OK .21OK .22OK 23...OK .OK 2425..............OK .26....OK 27.....OK ..28.....OK .29.OK .30OK .31....OK .32.OK ..33.........OK .34...OK .35.OK .OK 3637...OK .OK 3839..............OK ..OK 4041.........OK .OK .42.....OK 43..OK .44OK .45....OK 46..OK ..47.........OK 48OK 49.....OK .50OK 51...OK .OK .5253..............OK .OK 54.55.........OK .OK .5657..OK .OK .5859...OK .60...OK .6162............OK .OK 63.OK 64.65...OK .66....OK .6768..........OK .69....OK 70...........OK .OK 71OK 7273.OK .74....OK .75....OK .OK .76............OK .77OK 78OK ..79..OK .80.....OK ..81..........OK .82...OK .83........OK .84OK .OK .85OK 86.87......OK .88....OK .OK .8990.......OK 91....OK .92OK .93...OK .94.....OK .95..........OK .96....OK 97........OK .98.OK .OK 99100OK .101......OK .102.....OK .OK .103104......OK .105..OK .106OK .107.OK .108.....OK .109..OK ..110........OK .111....OK SUCCESS
Bisecting: 1265 revisions left to test after this (roughly 10 steps)
[7239f65cf364180cdb100a4ed211b2a9f9a72119] clockevents: remove sysdev.h
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-11-23:25:15 7239f65cf364180cdb100a4ed211b2a9f9a72119 compiling
/home/wfg/linux

2013-01-11-23:26:59 detecting boot state 3.2.0-rc1-bisect-00066-g7239f65 #9 .1..2.3.4..5............678..........91011.....12..13..........14......15...........OK .16.OK .OK 1718.OK 19..OK .20...........OK .OK 21.22......OK .23.OK .OK .2425...OK ..26OK .27..........OK .28....OK .29...........OK .30.OK .OK 31.32OK .33..OK .34...........OK 35OK .OK .36......OK .37..OK .OK 3839...OK .40.OK .41........OK .42OK .43.............OK .44.....OK .OK 4546.OK .47..OK .48..........OK .49OK .OK .50.....OK ..51OK .OK 52OK .5354.....OK .55OK .56.....OK .57.................OK 58.OK .59....OK .60.OK .61.OK .62...........OK .63OK .OK .64....OK .65OK 66..OK .OK .6768...OK .69OK .70.......OK .71...............OK .OK 7273.OK .74..OK .OK 7576..................OK .77OK .OK 78.79..OK .80OK .81...OK .OK 8283...OK .84OK .85.......OK .86........OK .87.....OK 88...OK .89..OK .OK 9091..................OK .92OK .OK 9394...OK .95OK .96..OK .97OK .OK 98OK 99.100...........OK .101........OK .102OK .103...OK .104.....OK .105OK .106.................OK .107.OK 108OK .109...OK .110OK .111..OK SUCCESS
Bisecting: 1265 revisions left to test after this (roughly 10 steps)
[176f950d310c81b7fafd96aabe53704f778ce269] ixgbe: add write flush in ixgbe_clock_out_i2c_byte()
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-11-23:39:18 176f950d310c81b7fafd96aabe53704f778ce269 compiling
/home/wfg/linux

2013-01-11-23:41:00 detecting boot state 3.2.0-rc7-bisect-01749-g176f950 #10 ...........1.........2.3.....45....6...........7.......8..9......OK 1011..OK .OK 1213OK .14OK .15............OK .16........OK ..OK 1718....OK .19....OK .20..........OK .21......OK .22OK .23.....OK .24OK .2526..OK .27OK .28OK .29...........OK .30..........OK .OK 3132....OK .33...OK .34...........OK 35......OK .36.OK .OK 3738....OK .39OK ..40OK .41OK .42..OK 43............OK .44......OK 45...OK .OK 4647...OK .48OK .49..............OK .50.......OK .51OK .OK 5253...OK .54..OK .OK 5556OK .57..OK .58...........OK .59......OK .6061..OK .62....OK .63OK .64.............OK ..65......OK .66OK .67.....OK .68.OK .69OK 7071...OK ..72...........OK ..73.....OK .OK 7475..OK .76..OK 77.OK .78................OK .79......OK .80OK 8182OK .83...OK .84OK .85OK .86OK .87.................OK .88.....OK .OK .8990.OK .91.OK ..92OK .93...............OK .94.......OK .OK 95OK .96OK .97..OK .98.OK .99OK 100101..................OK .102......OK .OK 103104..OK .105.OK .106OK .107................OK .108.....OK .109OK .OK 110.111OK .112.OK .OK SUCCESS
Bisecting: 1223 revisions left to test after this (roughly 10 steps)
[681d0378a9057a92b9e6e51c2112e53d920a092d] drivers/rtc/rtc-jz4740.c: make jz4740_rtc_driver static
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-11-23:53:50 681d0378a9057a92b9e6e51c2112e53d920a092d compiling
2013-01-11-23:54:40 681d0378a9057a92b9e6e51c2112e53d920a092d SKIP BROKEN BUILD
/usr/bin/make -C source O=/cc/wfg/linux-bisect-x86_64 ARCH=x86_64 distclean
make: Entering directory `/c/wfg/linux'
CLEAN .
CLEAN arch/x86/kernel/cpu
CLEAN arch/x86/kernel
CLEAN arch/x86/vdso
CLEAN arch/x86/lib
CLEAN firmware
CLEAN kernel
CLEAN lib
CLEAN usr
CLEAN Documentation/accounting
CLEAN Documentation/auxdisplay
CLEAN Documentation/connector
CLEAN Documentation/filesystems
CLEAN Documentation/ia64
CLEAN Documentation/laptops
CLEAN Documentation/networking/timestamping
CLEAN Documentation/networking
CLEAN Documentation/pcmcia
CLEAN Documentation/spi
CLEAN Documentation/timers
CLEAN Documentation/vm
CLEAN Documentation/watchdog/src
CLEAN arch/x86/boot/compressed
CLEAN arch/x86/boot
CLEAN .tmp_versions
CLEAN vmlinux System.map .tmp_kallsyms1.S .tmp_kallsyms1.o .tmp_kallsyms2.S .tmp_kallsyms2.o .tmp_vmlinux1 .tmp_vmlinux2 .tmp_System.map
CLEAN scripts/basic
CLEAN scripts/kconfig
CLEAN scripts/mod
CLEAN scripts
CLEAN include/config usr/include include/generated arch/x86/include/generated
CLEAN .config .config.old .version include/linux/version.h Module.symvers
make: Leaving directory `/c/wfg/linux'
Bisecting: 1223 revisions left to test after this (roughly 10 steps)
[97607d157c133ab18dfcd77fa836e37fa950a44a] pinctrl: make a copy of pinmux map
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-11-23:55:05 97607d157c133ab18dfcd77fa836e37fa950a44a compiling
/home/wfg/linux

2013-01-11-23:56:44 detecting boot state 3.2.0-rc3-bisect-00014-g97607d1 #1 ......1..2..3.4..56...................7....8..9....1011...12............OK .13..OK .14.OK .15.....OK .16.OK .17.OK .18OK .19.OK 20OK .21..................OK .22...OK .23.OK .24OK .25.OK .26...OK .27............OK 28...OK .29.OK 30.....OK .OK 3132....OK .33OK ..OK 3435....................OK .36...OK .37.OK .38OK .39.OK .40...OK .41...........OK ..42....OK .43.....OK .OK 44.45..OK .46..OK .OK .4748...................OK .49..OK .50OK .OK 5152OK .53...OK .54...............OK .55....OK .56......OK .OK 57OK 5859..OK .60..OK .OK 6162...................OK .63...OK .OK 6465OK 66OK .67...OK .68...........OK ..69..OK 70.....OK .71.....OK .72OK .7374..OK ..75..OK .76..................OK .77...OK .78OK .OK 7980OK .81...OK .82............OK .83.OK .84.....OK .85.....OK .OK 8687OK .88...OK .89.OK ..90..................OK .91...OK .OK .OK 92939495....OK .96.......OK .97......OK .98....OK .99...OK .100OK .101.OK .102...OK ..103.OK .104..................OK .105.....OK .OK .OK 106.107...OK .108.......OK .109......OK .110....OK .111...OK .OK SUCCESS
Bisecting: 1209 revisions left to test after this (roughly 10 steps)
[0ad5a81472a9d6a0e826e0c6ebe66d3792932a93] imx: Add save/restore functions for UART control regs
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-12-00:09:56 0ad5a81472a9d6a0e826e0c6ebe66d3792932a93 compiling
/home/wfg/linux

2013-01-12-00:10:59 detecting boot state 3.2.0-rc3-bisect-00064-g0ad5a81 #2 .....1.......2....3...4.5.6........7..8..................9......OK .OK .OK 10OK 1112...OK .13....OK .14......OK .15.......OK .16..OK .17OK .18OK .19.......OK ..20OK .21.................OK .22.......OK 23OK .OK 2425...OK .26....OK .27......OK .28.....OK .OK 2930...OK .31..OK .32.......OK .OK .OK 3334..................OK .35......OK .OK 3637OK ..38.OK ..39...OK .40..OK .41.....OK ..OK 4243......OK ..44.......OK .45...OK .OK 4647.................OK .48......OK .49OK .50OK .5152.OK .53...OK ..54..OK .55......OK .5657......OK ..58.......OK 59...OK .OK ..60.........OK .61......OK .62.......OK .63.OK .6465.OK .66...OK .67...OK .68......OK .69....OK .7071.........OK .72....OK .OK 7374........OK .75......OK .76......OK .77OK .78.OK .79.OK .80....OK .81..OK .82......OK .OK .83OK .84..OK .85.........OK .86..OK .87.OK .88.OK .89..............OK .90......OK .OK 9192..OK .93OK .94....OK .95...OK .96.......OK .97OK 9899..OK .100.....OK ..101.....OK .102.OK .103.OK .104.............OK .105......OK .106OK ..107.OK 108.OK .109OK SUCCESS
Bisecting: 1165 revisions left to test after this (roughly 10 steps)
[cb69f7decc3777822b240c46890a209df288c7bb] [SCSI] lpfc 8.3.28: Add support for ABTS failure handling
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-12-00:24:03 cb69f7decc3777822b240c46890a209df288c7bb compiling
/home/wfg/linux

2013-01-12-00:25:31 detecting boot state 3.2.0-rc5-bisect-00084-gcb69f7d #3 1.2.3.........4.....5...6...7....89.......10..11.................12.OK .13...OK .14...OK .15.OK .16OK .17........OK .18....OK .19..OK .20..OK .21...OK .OK 22.23.OK .24.....OK .25.............OK .26.....OK .27...OK .OK .28.....OK .29OK .30.......OK .31.....OK .32..OK ..33.....OK .34OK .35..OK .36.....OK .37.........OK .38........OK .39....OK .4041....OK .42.OK .43..OK .44.........OK .45...OK .OK .4647.OK ..OK 4849OK .50.....OK .51.............OK .52.....OK .53........OK .5455....OK 56.OK .57...OK .58.........OK .59....OK .6061.OK .62OK .63OK .64....OK .65..............OK 66..OK .67........OK .68..OK .69....OK .70OK ..71..OK .72.........OK .73.OK .74...OK .7576OK .OK 7778.OK .79OK .80.............OK .81.....OK .82........OK .83...OK .84...OK .85.OK .86...OK .87.....OK .88.OK .89.......OK .90OK 9192OK .93..OK ..OK 9495............OK .96.....OK .97........OK .98...OK .99...OK .100.OK .101...OK .102.....OK .103.OK .104......OK .OK 105.OK 106107.....OK 108OK .109............OK .110.....OK .111.........OK .112113.......OK ..OK 114115...OK .116.....OK SUCCESS
Bisecting: 1181 revisions left to test after this (roughly 10 steps)
[ea5768c74b8e0d6a866508fc6399d5ff958da5e3] mm/hugetlb.c: avoid bogus counter of surplus huge page
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-12-00:38:59 ea5768c74b8e0d6a866508fc6399d5ff958da5e3 compiling
2013-01-12-00:39:44 ea5768c74b8e0d6a866508fc6399d5ff958da5e3 SKIP BROKEN BUILD
/usr/bin/make -C source O=/cc/wfg/linux-bisect-x86_64 ARCH=x86_64 distclean
make: Entering directory `/c/wfg/linux'
CLEAN .
CLEAN arch/x86/kernel/cpu
CLEAN arch/x86/kernel
CLEAN arch/x86/vdso
CLEAN arch/x86/lib
CLEAN firmware
CLEAN kernel
CLEAN lib
CLEAN usr
CLEAN Documentation/accounting
CLEAN Documentation/auxdisplay
CLEAN Documentation/connector
CLEAN Documentation/filesystems
CLEAN Documentation/ia64
CLEAN Documentation/laptops
CLEAN Documentation/networking/timestamping
CLEAN Documentation/networking
CLEAN Documentation/pcmcia
CLEAN Documentation/spi
CLEAN Documentation/timers
CLEAN Documentation/vm
CLEAN Documentation/watchdog/src
CLEAN arch/x86/boot/compressed
CLEAN arch/x86/boot
CLEAN .tmp_versions
CLEAN vmlinux System.map .tmp_kallsyms1.S .tmp_kallsyms1.o .tmp_kallsyms2.S .tmp_kallsyms2.o .tmp_vmlinux1 .tmp_vmlinux2 .tmp_System.map
CLEAN scripts/basic
CLEAN scripts/kconfig
CLEAN scripts/mod
CLEAN scripts
CLEAN include/config usr/include include/generated arch/x86/include/generated
CLEAN .config .config.old .version include/linux/version.h Module.symvers
make: Leaving directory `/c/wfg/linux'
Bisecting: 1181 revisions left to test after this (roughly 10 steps)
[1a2d9156b5fc92b40aa2ffbc2fdf6d88bbf74f3a] ARM: at91: gpio make struct at91_gpio_bank an initdata
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-12-00:40:01 1a2d9156b5fc92b40aa2ffbc2fdf6d88bbf74f3a compiling
/home/wfg/linux

2013-01-12-00:41:28 detecting boot state 3.2.0-rc3-bisect-00021-g1a2d915 #1 ......1..2.........34.5..6......7..........8910...1112................OK .13.OK .14..........OK .15..OK 16........OK .OK 17OK 1819..OK .20......OK .21......OK .22OK .23OK .OK 2425..OK 26OK .27................OK 28..OK .29..........OK 30..OK .31........OK .OK 32OK .33..OK .34......OK .35.............................................................................................................................................................................................................................................................................................................................................................................................................................................................................OK ..3637.....................................................................OK .38.OK .OK .OK 394041OK 42.4344............................................................OK 45.OK 46............................................................OK .47...........OK 48.4950.................................................................................................................................................................................................................................................................................................................OK .51.........................................................................................................................................OK ..52..........................................................................OK .OK .5354OK 55..56....................................................................OK .57OK .OK .OK 585960OK .OK 616263.OK 64................................................................OK .65.OK .OK .OK 66OK 6768OK .OK 69OK 7071OK .72........................................................OK 73......OK .74OK .OK 7576OK .OK 77OK 7879OK .OK 8081OK 8283........................................................OK .8485...OK .86OK .OK 87OK .88OK 89OK 90OK .OK 91OK 9293OK .94OK .9596.......................................................OK .OK 9798..OK .99OK .OK 100OK 101OK 102103OK .104OK 105OK .OK 106107OK .OK 108.OK 109110...................................................OK 111...OK .OK 112113OK .OK 114OK 115116OK 117118OK .OK SUCCESS
Bisecting: 1164 revisions left to test after this (roughly 10 steps)
[f812f0f53e5643c06b929ce3299cbaffb307c488] pinctrl: u300-pinmux: register proper GPIO ranges
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-12-01:21:10 f812f0f53e5643c06b929ce3299cbaffb307c488 compiling
/home/wfg/linux

2013-01-12-01:22:00 detecting boot state 3.2.0-rc3-bisect-00018-gf812f0f #2 ............1...2....3.4.5..678..9..10.11.1213..14...........................................OK .15...OK .16..OK ..OK 1718OK .19.OK .OK .20OK .21.OK .22OK .OK 23OK .24OK 2526............................................OK .27.OK ..28.......OK .29OK .30OK .31.OK .OK .OK .3233OK .34.OK .OK 35OK .OK 36OK .373839..........................................OK .40.OK .41........OK .42OK .43OK .44...OK .OK .45OK 4647.OK .OK 48OK 49.OK 50.OK .5152........................................OK .53..OK .54........OK 55OK .56OK .57....OK .OK .OK 585960OK .OK 6162OK .63.OK .OK .6465........................................OK 66..OK .67........OK .68OK .69OK .70..OK .71OK .72OK .OK .73OK 74OK .75OK 76.77OK ..OK 78.79......................................OK .80..OK .81........OK .82OK .83....OK .84OK .85.OK .OK 86OK 8788OK .89OK .OK .90OK 9192........................................OK 93...OK .94OK .95...OK .96.OK .97......OK .98OK .99.OK .OK .OK 100101OK 102103.OK .OK .OK .104105106.....................................OK .107...OK .OK 108109....OK .110OK .111.......OK SUCCESS
Bisecting: 1160 revisions left to test after this (roughly 10 steps)
[1415dd8705394399d59a3df1ab48d149e1e41e77] ext3: Fix error handling on inode bitmap corruption
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-12-01:35:47 1415dd8705394399d59a3df1ab48d149e1e41e77 compiling
/home/wfg/linux

2013-01-12-01:37:16 detecting boot state 3.2.0-rc1-bisect-00095-g1415dd8 #3 ...1......23.45.67.8.910...............................11....12...13....OK .14OK ..15......OK .16......OK ..OK 17.OK 18OK 19OK .2021OK .22OK ..23.............................OK .24....OK .25.OK .26.....OK .27.OK .28......OK .29......OK .OK 3031OK .OK 3233.OK .34OK .OK 3536...OK .OK ..37...................OK ..38.......OK ..39...OK .40.....OK .41......OK .42...OK 43...OK .44OK .45OK 46....OK .OK 4748..............................................................................................................OK .4950................................................................................OK .OK ..515253.........................................................................OK .OK 54OK 5556OK .57OK 5859...........................................................OK .60OK 61OK 62OK 63.OK 64OK .OK 65OK .66OK .OK 6768.........................................................................................OK ....6970...............................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................OK .OK ....71............................................................................OK .OK .72.OK .OK ....737475................................................................OK .7677.OK 78..OK .OK ..79OK 80OK 81..8283............................................................OK .OK .84OK 8586OK .87..OK .88OK .89OK .OK 90OK .OK .9192OK .OK .93.................................................OK .94.OK .95....OK .9697...OK .98OK .99OK .100OK .OK .OK 101102103OK .104................................................OK .105106.OK .107OK .108..OK .109....OK ..OK 110111...OK .OK .OK .112OK 113.114115..............................................OK SUCCESS
Bisecting: 1155 revisions left to test after this (roughly 10 steps)
[8e609d5e7bc032ab220d47c841c992bd8544d0e1] powerpc/pmac: Simplify old pmac PIC interrupt handling
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-12-02:13:25 8e609d5e7bc032ab220d47c841c992bd8544d0e1 compiling
/home/wfg/linux

2013-01-12-02:14:54 detecting boot state 3.2.0-rc3-bisect-00153-g8e609d5 #4 .1....234.........................................5...............................................................................................................................................................OK .67......................................................................OK .OK 89OK .OK ..10OK .OK ......11.121314........................................................OK .OK 1516......OK ..17.....OK 1819.OK .OK .2021......................................................OK .OK 2223..OK .24.....OK .25..OK .OK 26OK 27........................OK 28........................................................................OK .2930........................................................................OK .OK ..3132................................................................................OK ...333435......................................................................OK .36.OK .OK .OK 373839...................................................................OK .40..OK .OK ...41.424344................................................................OK .45....OK .46OK 47...............................................................................................................OK 484950.........................................................................OK .OK 51OK 52.5354........................................................................OK 5556OK .OK .OK 57585960...............................................................OK ..61.OK ..62.OK ..63.OK .OK .6465..........................................................OK .66..OK .OK 6768.OK .69OK 70.OK .OK 71OK 72..OK .73...........................................................OK .74..OK .75...OK .76OK .77OK ..7879OK ..80..........................................................OK .8182.OK ..8384OK 85OK .OK 86.87.OK .OK .88.OK .8990.....................................................OK .91..OK 92OK 93...OK 9495OK .96OK .OK 97OK 9899.OK .100..................................................OK 101......OK .OK 102103...OK .OK 104105OK .106OK .OK 107.OK .OK 108109..OK ..110................................................OK .111...OK .112OK .113....OK .114OK 115.OK 116.OK .117OK .OK SUCCESS
Bisecting: 1070 revisions left to test after this (roughly 10 steps)
[db0c2bf69aa095d4a6de7b1145f29fe9a7c0f6a3] Merge branch 'for-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-12-02:52:21 db0c2bf69aa095d4a6de7b1145f29fe9a7c0f6a3 compiling
2013-01-12-02:53:07 db0c2bf69aa095d4a6de7b1145f29fe9a7c0f6a3 SKIP BROKEN BUILD
/usr/bin/make -C source O=/cc/wfg/linux-bisect-x86_64 ARCH=x86_64 distclean
make: Entering directory `/c/wfg/linux'
CLEAN .
CLEAN arch/x86/kernel/cpu
CLEAN arch/x86/kernel
CLEAN arch/x86/vdso
CLEAN arch/x86/lib
CLEAN firmware
CLEAN kernel
CLEAN lib
CLEAN usr
CLEAN Documentation/accounting
CLEAN Documentation/auxdisplay
CLEAN Documentation/connector
CLEAN Documentation/filesystems
CLEAN Documentation/ia64
CLEAN Documentation/laptops
CLEAN Documentation/networking/timestamping
CLEAN Documentation/networking
CLEAN Documentation/pcmcia
CLEAN Documentation/spi
CLEAN Documentation/timers
CLEAN Documentation/vm
CLEAN Documentation/watchdog/src
CLEAN arch/x86/boot/compressed
CLEAN arch/x86/boot
CLEAN .tmp_versions
CLEAN vmlinux System.map .tmp_kallsyms1.S .tmp_kallsyms1.o .tmp_kallsyms2.S .tmp_kallsyms2.o .tmp_vmlinux1 .tmp_vmlinux2 .tmp_System.map
CLEAN scripts/basic
CLEAN scripts/kconfig
CLEAN scripts/mod
CLEAN scripts
CLEAN include/config usr/include include/generated arch/x86/include/generated
CLEAN .config .config.old .version include/linux/version.h Module.symvers
make: Leaving directory `/c/wfg/linux'
Bisecting: 1070 revisions left to test after this (roughly 10 steps)
[1ba37268cd19e5a2a80924bfe8618bf1ba3e8249] jbd2: clear revoked flag on buffers before a new transaction started
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-12-02:53:28 1ba37268cd19e5a2a80924bfe8618bf1ba3e8249 compiling
/home/wfg/linux

2013-01-12-02:55:00 detecting boot state 3.2.0-rc6-bisect-00009-g1ba3726 #1 ..1.....2....3.4.5.6.7.....8...................................................OK .9...OK ..10...OK .OK 11OK 1213OK .OK 1415.OK 16.OK .17..OK 18....................................................OK .19....OK .OK .2021OK 2223OK .OK .24OK 2526..OK .27OK .28..OK .29...................................................OK .30OK .31.OK .32OK .OK 33OK 34OK 3536.OK .37OK .38OK .39......OK .40...................................................OK .OK 41OK 4243..OK .OK 44OK .OK .OK 45.46OK 47OK 484950.......OK .51...................................................OK .52OK .OK 5354.OK .55....OK .OK .OK 56OK 57OK 585960..OK .61......................................................OK .OK 6263OK .64..OK .65...OK .66OK 67OK 6869OK .OK 707172........................................................OK .OK 73OK .74OK 7576.OK .77..OK .OK 78OK .OK 798081.OK .OK 82OK ..83..........................................................................................................................................................................................................................................................................OK .OK .....................................................................................................................................................................................................................................................................................................................................................................................................................................8485........................................................................OK .86.OK .OK 87OK 8889.OK .9091.................................................................OK .OK 92.93OK .OK .OK .9495OK .OK .9697.................................................................OK .98OK .OK 99100OK .OK .OK 101102OK .OK .103104...........................................................OK .OK 105106.OK .107.OK .OK SUCCESS
Bisecting: 1083 revisions left to test after this (roughly 10 steps)
[ac69e0928054ff29a5049902fb477f9c7605c773] Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-12-03:28:05 ac69e0928054ff29a5049902fb477f9c7605c773 compiling
2013-01-12-03:28:49 ac69e0928054ff29a5049902fb477f9c7605c773 SKIP BROKEN BUILD
/usr/bin/make -C source O=/cc/wfg/linux-bisect-x86_64 ARCH=x86_64 distclean
make: Entering directory `/c/wfg/linux'
CLEAN .
CLEAN arch/x86/kernel/cpu
CLEAN arch/x86/kernel
CLEAN arch/x86/vdso
CLEAN arch/x86/lib
CLEAN firmware
CLEAN kernel
CLEAN lib
CLEAN usr
CLEAN Documentation/accounting
CLEAN Documentation/auxdisplay
CLEAN Documentation/connector
CLEAN Documentation/filesystems
CLEAN Documentation/ia64
CLEAN Documentation/laptops
CLEAN Documentation/networking/timestamping
CLEAN Documentation/networking
CLEAN Documentation/pcmcia
CLEAN Documentation/spi
CLEAN Documentation/timers
CLEAN Documentation/vm
CLEAN Documentation/watchdog/src
CLEAN arch/x86/boot/compressed
CLEAN arch/x86/boot
CLEAN .tmp_versions
CLEAN vmlinux System.map .tmp_kallsyms1.S .tmp_kallsyms1.o .tmp_kallsyms2.S .tmp_kallsyms2.o .tmp_vmlinux1 .tmp_vmlinux2 .tmp_System.map
CLEAN scripts/basic
CLEAN scripts/kconfig
CLEAN scripts/mod
CLEAN scripts
CLEAN include/config usr/include include/generated arch/x86/include/generated
CLEAN .config .config.old .version include/linux/version.h Module.symvers
make: Leaving directory `/c/wfg/linux'
Bisecting: 1083 revisions left to test after this (roughly 10 steps)
[0f5a2601284237e2ba089389fd75d67f77626cef] perf: Avoid a useless pmu_disable() in the perf-tick
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-12-03:28:59 0f5a2601284237e2ba089389fd75d67f77626cef compiling
/home/wfg/linux

2013-01-12-03:30:29 detecting boot state 3.2.0-rc1-bisect-00384-g0f5a260 #1 .........................OK 1OK .2........OK .OK 3OK 45.OK .6.OK 7OK .OK 8OK 910.................................................OK .11OK 12..........OK .13OK .14OK .OK .15OK .16.OK .OK 1718OK .OK 1920................................................OK .21OK ..22.......OK .23OK .OK 2425..OK .26OK .27OK ..OK 28OK .29OK .30................................................OK .31.OK .32.......OK 33.OK 34OK .35.OK .36OK 37OK 38..OK .39OK .40OK 41.............................................OK 42..OK .43..OK .44.....OK .OK 45OK 46OK 47OK .48...OK .OK 4950....OK 51OK .52............................................OK .53.OK .5455.........OK .OK 56OK .57OK 58OK ..5960OK .61....OK .62OK .63...........................................OK .OK .64.OK .65..........OK .66OK 67OK .68OK .OK .OK 69OK 7071....OK .72.OK 73............................................OK .7475.OK 76..........OK .77OK .OK 78OK 79OK 80OK 81OK 8283....OK .84OK 85...........................................OK .86.OK .87..OK .88.........OK .89OK .OK 90OK .OK 9192OK .93..OK .94OK .95............................................OK SUCCESS
Bisecting: 1061 revisions left to test after this (roughly 10 steps)
[75072323a2968c1bd1b74a48ebf5a5d7e5e10183] Input: ucb1400_ts - drop inline annotations
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-12-03:45:28 75072323a2968c1bd1b74a48ebf5a5d7e5e10183 compiling
/home/wfg/linux

2013-01-12-03:46:53 detecting boot state 3.2.0-rc3-bisect-00062-g7507232 #2 ......1.2................34.5.6789..10..11.......................................OK .OK 12OK 1314...............OK 15..OK .16OK .17...OK 18OK 19OK 2021....OK .22...................................OK .23.OK .24OK .25..........OK .26......OK 27.OK .28..OK .OK 29OK 30OK .3132...OK .33....................................OK .34OK .35.....OK 36.......OK .37.....OK .38OK .39...OK .OK 4041OK .OK 4243....................................OK .44.OK 45.....OK .46..........OK .47.....OK .48OK .49OK 50...OK .OK 5152OK .5354............................OK .55........OK .56....OK ..57..........OK .58.....OK .59OK 60OK .6162..OK .OK .63OK 64.65............................OK .66........OK 67.....OK .68..........OK .69......OK .OK 7071OK .72....OK .OK 7374OK 7576.......................OK .77........OK .78.OK 79..................OK 80..OK .8182OK .83OK .84..OK .85.OK .86OK .87OK 88.......................OK .89....OK 90.....OK .91...................OK .OK .92.OK .OK .93..OK .9495OK .96..OK .97OK .98.......................OK .OK 99100................................................OK ..........................................................................................OK 101102..................................................................OK .103................................................................................................................................OK .OK ...............................104...............................................................................................................................................................................................................OK .105.....................................................................OK ..106107OK 108OK ..109............................................................................................OK ..110...........................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................OK .111........................................................................OK .112.OK .OK .OK SUCCESS
Bisecting: 1038 revisions left to test after this (roughly 10 steps)
[993ecff81aa6d50d694704de2647a5529ff2f166] Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfs
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-12-04:30:11 993ecff81aa6d50d694704de2647a5529ff2f166 compiling
2013-01-12-04:30:54 993ecff81aa6d50d694704de2647a5529ff2f166 SKIP BROKEN BUILD
/usr/bin/make -C source O=/cc/wfg/linux-bisect-x86_64 ARCH=x86_64 distclean
make: Entering directory `/c/wfg/linux'
CLEAN .
CLEAN arch/x86/kernel/cpu
CLEAN arch/x86/kernel
CLEAN arch/x86/vdso
CLEAN arch/x86/lib
CLEAN firmware
CLEAN kernel
CLEAN lib
CLEAN usr
CLEAN Documentation/accounting
CLEAN Documentation/auxdisplay
CLEAN Documentation/connector
CLEAN Documentation/filesystems
CLEAN Documentation/ia64
CLEAN Documentation/laptops
CLEAN Documentation/networking/timestamping
CLEAN Documentation/networking
CLEAN Documentation/pcmcia
CLEAN Documentation/spi
CLEAN Documentation/timers
CLEAN Documentation/vm
CLEAN Documentation/watchdog/src
CLEAN arch/x86/boot/compressed
CLEAN arch/x86/boot
CLEAN .tmp_versions
CLEAN vmlinux System.map .tmp_kallsyms1.S .tmp_kallsyms1.o .tmp_kallsyms2.S .tmp_kallsyms2.o .tmp_vmlinux1 .tmp_vmlinux2 .tmp_System.map
CLEAN scripts/basic
CLEAN scripts/kconfig
CLEAN scripts/mod
CLEAN scripts
CLEAN include/config usr/include include/generated arch/x86/include/generated
CLEAN .config .config.old .version include/linux/version.h Module.symvers
make: Leaving directory `/c/wfg/linux'
Bisecting: 1038 revisions left to test after this (roughly 10 steps)
[272f01bf9b6da93f49fcca2656c24da8d2cfcc09] [S390] irq: fix accounting of external call/emergency signal
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-12-04:31:04 272f01bf9b6da93f49fcca2656c24da8d2cfcc09 compiling
/home/wfg/linux

2013-01-12-04:32:34 detecting boot state 3.2.0-rc7-bisect-00018-g272f01b #1 .........................1.........2....345.6789......................................................OK .10OK .11........OK .12.OK .OK 13OK 14OK 1516OK 17OK .1819.....................................................OK .20.OK .21........OK .22..OK .OK 23OK 24OK 2526OK .OK ..2728.................................................OK .29OK .30..........OK .31.OK .OK 32OK 33OK 34OK 35OK .OK 363738OK .3940................................................OK ..OK 4142..........OK .43.OK .OK 44OK 45OK 46OK 47OK .OK 4849OK .OK 5051..................................................OK 52OK .53......OK .54.....OK .55OK .OK 56OK 5758OK .OK 5960OK .OK .61.................................................OK .OK 6263.......OK 64..OK .65....OK 66OK .OK 67OK 6869OK .70OK .OK 7172................................................OK .73OK .74......OK .75..OK .76...OK .77OK .OK 78OK .79OK 8081OK 82OK .83................................................OK .84OK 85.......OK .86.......OK .87OK .88OK .OK 89OK .OK 90.OK 9192..OK .93........................................OK .94....OK 95OK .96..............OK .97OK .98OK .99OK 100.OK .OK 101102..OK .103...................................OK .104......OK .105OK .106OK .107.......OK SUCCESS
Bisecting: 1038 revisions left to test after this (roughly 10 steps)
[134d33737f9015761c3832f6b268fae6274aac7f] cgroup: improve old cgroup handling in cgroup_attach_proc()
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-12-04:49:40 134d33737f9015761c3832f6b268fae6274aac7f compiling
/home/wfg/linux

2013-01-12-04:51:06 detecting boot state 3.2.0-rc2-bisect-00481-g134d337 #2 ..1.........2..3.4.5.6.7..................................8..........OK .OK 910OK .11.OK .12............OK 1314.OK .15OK .OK 16OK 1718..OK .19.................................OK .20......OK .OK 2122OK .23.....OK .24.........OK .25OK .OK 2627.OK .28OK .29OK .30.OK .31..................................OK .32......OK .OK 33OK 3435.OK .36.............OK .OK 37.OK .38....OK .39OK .40.OK .41..........................OK .42......OK .43......OK .44OK .45.OK .46.........OK .47OK .OK 4849.OK .50OK .51OK .52.OK .53..........................OK .54...........OK .55......OK .OK 5657.OK ..58.........OK 59.OK .OK 6061OK .OK 6263OK .64OK .65.............................OK .66..........OK .67....OK .68.OK 69....OK .70........OK .71.OK .OK 7273OK .74.OK 75.OK .76.............................OK 77...........OK .78....OK 79.OK .80....OK .81..........................................OK .................................................................82OK 83OK .8485.......................................................................OK .OK 86OK 87OK 888990................................................................OK 91.OK .OK 92OK 93OK .94OK 95OK 96OK 979899......................................................................................OK ..100..........................................................................................................................................................................................................................................................................................................................OK .101.................................................................................................OK ....................................................................................................................................................................................................................102103........................................................................OK .104..OK .OK 105106.....................................................................................................................................................................................................................................................................................................................................................................OK ...107108........................................................................................................................................................................................................OK ....109.........................................................................OK .110.OK .OK .111112113OK SUCCESS
Bisecting: 1016 revisions left to test after this (roughly 10 steps)
[fe5d3e887e3f9d0a97e5b8df968ab84a12128495] Merge branch 'prcm' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into omap/prcm
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-12-05:38:56 fe5d3e887e3f9d0a97e5b8df968ab84a12128495 compiling
/home/wfg/linux

2013-01-12-05:40:25 detecting boot state 3.2.0-rc4-bisect-00120-gfe5d3e8 #3 1234............................................................OK .5OK .6.....OK .OK 78OK .9OK ..OK 101112.......................................................OK .OK 1314......OK .15.OK .16OK .17OK .18.OK .OK 19OK 2021......................................................OK .22OK .23......OK 24.OK .OK 25OK 2627OK .OK ..28OK .OK .2930..................................................OK .31OK .32......OK .33OK 34....OK 35OK .3637.OK .OK .38OK .OK .3940................................................OK .41OK .42...OK 43OK .44...OK .45.OK 46..OK .47..OK .OK 4849OK .50OK 51.................................................OK .52OK .OK 5354OK .OK 5556.......OK ..57.OK .OK 5859OK .OK .606162OK 63..............................................OK .64OK .65....OK 66OK .67OK .68.......OK .69.OK .OK 7071.OK .OK 72OK .73OK 74..........................................OK .75OK .76....OK .77.OK .78.OK .79........OK .80.OK .OK 8182OK .83OK .OK .OK 8485.........................................OK .86OK .87....OK .OK 88.OK 89............OK .OK .9091.OK .92OK .93OK 9495..........................................OK .96.OK .97....OK 9899OK .100.........OK .101..OK .102..OK .103OK SUCCESS
Bisecting: 1007 revisions left to test after this (roughly 10 steps)
[e3a41a5ba9c2ab988b9f1442925109dca2382fd9] btrfs: pass __GFP_WRITE for buffered write page allocations
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-12-05:56:51 e3a41a5ba9c2ab988b9f1442925109dca2382fd9 compiling
2013-01-12-05:57:36 e3a41a5ba9c2ab988b9f1442925109dca2382fd9 SKIP BROKEN BUILD
/usr/bin/make -C source O=/cc/wfg/linux-bisect-x86_64 ARCH=x86_64 distclean
make: Entering directory `/c/wfg/linux'
CLEAN .
CLEAN arch/x86/kernel/cpu
CLEAN arch/x86/kernel
CLEAN arch/x86/vdso
CLEAN arch/x86/lib
CLEAN firmware
CLEAN kernel
CLEAN lib
CLEAN usr
CLEAN Documentation/accounting
CLEAN Documentation/auxdisplay
CLEAN Documentation/connector
CLEAN Documentation/filesystems
CLEAN Documentation/ia64
CLEAN Documentation/laptops
CLEAN Documentation/networking/timestamping
CLEAN Documentation/networking
CLEAN Documentation/pcmcia
CLEAN Documentation/spi
CLEAN Documentation/timers
CLEAN Documentation/vm
CLEAN Documentation/watchdog/src
CLEAN arch/x86/boot/compressed
CLEAN arch/x86/boot
CLEAN .tmp_versions
CLEAN vmlinux System.map .tmp_kallsyms1.S .tmp_kallsyms1.o .tmp_kallsyms2.S .tmp_kallsyms2.o .tmp_vmlinux1 .tmp_vmlinux2 .tmp_System.map
CLEAN scripts/basic
CLEAN scripts/kconfig
CLEAN scripts/mod
CLEAN scripts
CLEAN include/config usr/include include/generated arch/x86/include/generated
CLEAN .config .config.old .version include/linux/version.h Module.symvers
make: Leaving directory `/c/wfg/linux'
Bisecting: 1007 revisions left to test after this (roughly 10 steps)
[19c5246d251640ac76daa4d34165af78c64b1454] ext4: add new online resize interface
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-12-05:57:48 19c5246d251640ac76daa4d34165af78c64b1454 compiling
/home/wfg/linux

2013-01-12-05:59:19 detecting boot state 3.2.0-rc6-bisect-00023-g19c5246 #1 ...1.2.3..4.........5.......6.789...10.....................................OK 1112OK 13...OK .14.....OK .15.......OK .16......OK 17OK .18OK .OK 1920..OK .21.................................OK .22OK .23OK .24OK .25.....OK .26...........OK .27...OK ..28OK 29OK .30OK 3132...OK ..33................................OK .34OK .35OK .36OK .37.....OK .38............OK 39....OK .OK 4041OK .42.OK 43....OK .44............................OK .45OK .46OK .47OK .48.OK .49....................OK .50.OK .51.OK .OK 5253OK .54.....OK .55..........................OK .56OK .57OK .58.....OK .59....................OK .60.OK .61OK .OK .OK 626364.......OK .65......................OK .66OK .67OK .68.........OK .69....................OK 70..OK 71.OK .OK 72OK 73OK .74.......OK 75..................OK .76OK .OK 77OK 7879..........OK .80......................OK .OK 8182.OK .OK 8384OK .OK 8586........OK .87..............OK .88OK .89...OK 90OK .91.....OK .92........................OK .93.OK .OK 9495OK 96OK .97..OK .98.......OK .99..............OK .100.OK .OK .101102.........OK 103........................OK .OK 104OK 105OK 106107..OK .OK .108...........OK .109..........OK SUCCESS
Bisecting: 995 revisions left to test after this (roughly 10 steps)
[4f89b336fd1edf0c88875d0b7fcdc288c7de903d] rcu: Apply ACCESS_ONCE() to rcu_boost() return value
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-12-06:15:02 4f89b336fd1edf0c88875d0b7fcdc288c7de903d compiling
/home/wfg/linux

2013-01-12-06:16:28 detecting boot state 3.2.0-rc5-bisect-00063-g4f89b33 #2 .....................................................................................................1..................23.......................................................................OK .OK 45OK 6OK .OK 78....................................................................................................................................................................................................OK 910...........................................................................................................................................................................................................................................................................OK ...........................................................................11.....................................................................OK ..12.OK .1314.......................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................OK ..15......................................................................................................OK ......161718.........................................................................OK .1920..........................................................................................OK .2122......................................................................OK 23..OK .24..OK .OK ....252627..........................................................OK .28......OK .2930.....OK .OK 31OK 3233....................................................OK .34......OK .35..OK .36..OK .37..OK .OK .3839..................................................OK .40......OK .41..OK .42..OK .43..OK .44..OK .454647.............................................OK .48..........OK .49...OK .5051.OK .52..OK 53...OK .OK .OK 545556............................................OK .57......OK .58...OK .59..OK .60.OK .61...OK .62...OK .OK ..6364.......................................OK .65......OK .66.OK .67.......OK 68OK 6970......OK .71.....OK .OK 727374.................................OK .75...........OK .76.OK 77.......OK 78OK .7980.....OK .81...OK .82OK .83OK .8485.............................OK 86..........OK .87...OK .88.....OK .OK 8990...OK .91..OK .92...OK .93....OK .94OK .OK ..95.......................OK .96.............OK .97OK 98.........OK .99OK .100...OK .101.OK .OK 102103........OK .104..OK .105106......................OK .107.............OK .OK 108109.......OK .110OK .111.....OK .112.OK .OK 113114........OK .115..OK .OK ..116.................OK SUCCESS
Bisecting: 976 revisions left to test after this (roughly 10 steps)
[2b5e97e1fadf1ade87558f2a2003616879f9e228] KVM: x86 emulator: Use opcode::execute for INS/OUTS from/to port in DX
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-12-07:09:12 2b5e97e1fadf1ade87558f2a2003616879f9e228 compiling
/home/wfg/linux

2013-01-12-07:10:39 detecting boot state 3.2.0-rc7-bisect-00057-g2b5e97e #3 .1..............2.3..........45............6...7.8.....9....10.................OK .11..............OK .OK 1213.........OK .14OK 15...........OK ..16..OK .OK 1718.....OK .19..OK .2021.........22..OK .23..............OK 24OK .25........OK .26OK .27........OK 28..........OK .29OK .30.....OK .OK 3132............OK .33.............OK .OK 3435.....OK .36.......OK .37....OK 38...............OK 39OK 4041...OK 42..OK .43.............OK ..44.......OK .45..OK .OK .4647..............OK .48...OK .49..............OK .OK 50OK 5152..OK .53..OK .54..........OK 55...OK 56....OK .57......OK .OK .5859.........OK .60.......OK .61...............OK 62OK .63..OK .64..OK .65..........OK .66..OK 67.....OK 68.......OK .OK 6970......OK .71.......OK 72...................OK .73OK ..7475............OK .76.OK .77........OK .78....OK .79.OK .80..OK ..81..........OK .82...................OK .83.OK .84.85..........OK .86..OK .87........OK .88....OK .89.OK 90...OK .91.......OK .92..................OK .93...OK .94.OK 95OK .96..........OK .97..OK .98........OK .99....OK .100............................................OK ..101102103104..OK .105......OK .106......OK .107.OK ..108.................................................OK .OK 109OK .OK 110111112OK .113......OK ..114......OK .115.OK .116.........................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................OK ..117.......................................................................OK SUCCESS
Bisecting: 955 revisions left to test after this (roughly 10 steps)
[b7044d41b5a09ce9082699f74c8f10e0fe59f704] md/raid10: If there is a spare and a want_replacement device, start replacement.
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-12-08:00:30 b7044d41b5a09ce9082699f74c8f10e0fe59f704 compiling
/home/wfg/linux

2013-01-12-08:01:57 detecting boot state 3.2.0-rc1-bisect-00042-gb7044d4 #4 .....12...3......4.5.6........................................................OK .7OK .OK .89..OK 10....OK .OK 11OK 1213..OK ..14...................................................OK .15...OK .16.OK .17......OK .18OK 19OK .OK .OK 20.21.OK .22...................................................OK 23...OK .24.OK .OK 2526.....OK ..OK 2728OK .OK ..OK .2930OK 313233.................................................OK .34..OK .35..OK .OK 3637.....OK .OK 3839OK .OK 4041OK .OK .42OK 43.44.................................................OK 45...OK .46..OK .OK 4748.....OK .49OK .OK 5051OK 52.OK .53OK .OK 5455................................................OK .56....OK 57..OK .OK .5859....OK .60OK .OK 61.OK 6263OK .64OK .OK .OK 656667...........................................OK .68.......OK .69..OK .OK 7071.....OK .72OK 73OK .OK 7475OK .76.OK ..77...OK .78.......................................OK .79....OK .80.OK .81.........OK .OK .82OK .83.OK .84OK .85.OK .OK 8687...OK 88...................................OK .89........OK .OK 9091OK .92..........OK .OK .93OK 94OK 9596OK .97..OK .98OK .99..OK .100..............................OK .101............OK 102OK .OK 103104............OK SUCCESS
Bisecting: 955 revisions left to test after this (roughly 10 steps)
[0561ceabd0f13871900d116278fe9268aeb714d1] ARM: dts: Add intial dts file for EXYNOS4210 SoC, SMDKV310 and ORIGEN
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-12-08:18:37 0561ceabd0f13871900d116278fe9268aeb714d1 compiling
/home/wfg/linux

2013-01-12-08:20:10 detecting boot state 3.2.0-rc6-bisect-00027-g0561cea #5 .1...2.3....4......................5................6......7............OK ..OK 8OK 910OK .OK .1112...OK .13...OK 14.....................OK ..15...........OK 16.....OK .17...OK .18............OK .OK 1920OK 21.OK .OK 2223...OK .24...OK 25.....................OK .26.......OK .27.....OK .28...OK .29............OK .30OK .31.OK 32.OK .33OK .OK .3435...OK .36........................OK .37.......OK .38.....OK .OK 3940................OK .OK 41OK 4243...OK .OK 4445OK .46OK .47..OK .48.........................OK .49...OK .50..OK .51.OK 52..................OK .53..OK 54OK .55....OK .OK 56.OK 57OK .OK 5859..........................OK .60.OK .61.....OK .OK 6263.................OK 64....OK .65OK .66..OK .67..OK .68OK .69OK .OK 7071....................OK .OK 7273............OK .74OK .75...............OK .76..OK 77.OK 78.....OK .79..OK 8081OK 82.OK .83....................OK .84OK .85...........OK .86OK .87................OK .OK 8889OK .90......OK .OK .OK 9192.....OK .93...................OK .94OK .95..........OK .96OK 97.............OK .OK 9899.....OK .100....OK .101..OK 102OK .103....OK .104...................OK 105OK SUCCESS
Bisecting: 950 revisions left to test after this (roughly 10 steps)
[6c15d74defd38e7e7f8805392578b7a1d508097e] asix: fix infinite loop in rx_fixup()
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-12-08:35:26 6c15d74defd38e7e7f8805392578b7a1d508097e compiling
2013-01-12-08:35:52 6c15d74defd38e7e7f8805392578b7a1d508097e SKIP BROKEN BUILD
/usr/bin/make -C source O=/cc/wfg/linux-bisect-x86_64 ARCH=x86_64 distclean
make: Entering directory `/c/wfg/linux'
CLEAN .
CLEAN arch/x86/kernel/cpu
CLEAN arch/x86/kernel
CLEAN arch/x86/vdso
CLEAN arch/x86/lib
CLEAN firmware
CLEAN kernel
CLEAN lib
CLEAN usr
CLEAN Documentation/accounting
CLEAN Documentation/auxdisplay
CLEAN Documentation/connector
CLEAN Documentation/filesystems
CLEAN Documentation/ia64
CLEAN Documentation/laptops
CLEAN Documentation/networking/timestamping
CLEAN Documentation/networking
CLEAN Documentation/pcmcia
CLEAN Documentation/spi
CLEAN Documentation/timers
CLEAN Documentation/vm
CLEAN Documentation/watchdog/src
CLEAN arch/x86/boot/compressed
CLEAN arch/x86/boot
CLEAN .tmp_versions
CLEAN vmlinux System.map .tmp_kallsyms1.S .tmp_kallsyms1.o .tmp_kallsyms2.S .tmp_kallsyms2.o .tmp_vmlinux1 .tmp_vmlinux2 .tmp_System.map
CLEAN scripts/basic
CLEAN scripts/kconfig
CLEAN scripts/mod
CLEAN scripts
CLEAN include/config usr/include include/generated arch/x86/include/generated
CLEAN .config .config.old .version include/linux/version.h Module.symvers
make: Leaving directory `/c/wfg/linux'
Bisecting: 950 revisions left to test after this (roughly 10 steps)
[141168c36cdee3ff23d9c7700b0edc47cb65479f] x86: Simplify code by removing a !SMP #ifdefs from 'struct cpuinfo_x86'
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-12-08:36:03 141168c36cdee3ff23d9c7700b0edc47cb65479f compiling
/home/wfg/linux

2013-01-12-08:37:31 detecting boot state 3.2.0-rc4-bisect-00162-g141168c #1 ..1....2.3...4.56..7...........8...............9.10................OK .11OK 12.......OK .13...OK .14OK 15...OK 16OK .17OK 18.OK .19.........OK .20............OK .21OK .22................OK 23OK .24.......OK .OK 2526OK .27.....OK .28OK 29OK .30.OK .31.........OK 32............OK .33.OK 34............................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................OK .3536........................................................................OK .3738.OK ...3940.............................................................OK .41..OK 42..OK .OK .OK 434445.OK .OK .464748.....................................................OK .49......OK .50OK .51OK .OK 5253...OK .OK ..545556..................................................OK .57.......OK .58OK .59..OK .OK 60OK .61.....OK .OK 62OK 6364.................................................OK .65.........OK .OK 6667...OK ..OK 68.6970..OK .OK 7172OK .OK .7374...........................................OK .75..........OK .OK 7677.OK .78..OK .OK .7980OK ..81.OK .OK .8283OK .84.......................................OK .85...............OK .86.OK .87...OK .OK .88.OK .89..OK .OK 9091OK .92.......................................OK .93...........OK .94.OK .95..OK .96..OK .OK .OK .9798OK .99.OK ..OK 100101OK .102.......................................OK .103............OK .104.OK 105..OK .106.....OK .OK .107OK 108109..OK .110.OK .111OK .112................................OK SUCCESS
Bisecting: 950 revisions left to test after this (roughly 10 steps)
[1d3452c63d4b62329d34d7634f67a3dbec21ca87] HID: wiimote: Allow direct eeprom access
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-12-09:12:06 1d3452c63d4b62329d34d7634f67a3dbec21ca87 compiling
/home/wfg/linux

2013-01-12-09:13:42 detecting boot state 3.1.0-bisect-08917-g1d3452c #2 ..............1...2.......3....456.78..9............................OK ..10....................OK 11...OK 1213.....OK .14....OK 15OK 1617.OK 18OK 19OK 20.OK .21........................OK .22....................OK .23..OK .24..OK 25.....OK .26.OK .OK 2728OK ..OK 29OK 3031OK .32........................OK .33....................OK .34..OK 3536.OK .37....OK .38..OK .39..OK .40..OK .OK 41OK .42OK 4344....................OK .45....................OK .46.....OK .OK .47.OK 48.....OK .49..OK .50..OK .51..OK .52OK .OK 53OK 5455................OK .56....................OK 57.......OK ..58OK 59.........OK .60..OK .61..OK .6263OK .64.OK .65OK .66............OK .67................OK .68.............OK 69.OK .70..........OK .71..OK .OK .72..OK .73OK .74.OK .75.OK 76............OK ..77...............OK .78...........OK .OK 7980.OK .81.......OK 82.......OK ..83...OK .84OK 85OK .86...............OK .87...............OK .88.........OK 89.OK .OK 9091......OK 92........OK .93..OK .9495...OK .OK 9697OK .98..............OK .99............OK .100...........OK .OK 101102.OK .103......OK .104........OK .105..OK 106....OK .OK 107108OK .109..............OK ..110...........OK .111.......OK SUCCESS
Bisecting: 936 revisions left to test after this (roughly 10 steps)
[6c254de16a1d14c1ac931d3aa08dc88ac9fc582b] xen/pciback: Expand the warning message to include domain id.
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-12-09:29:58 6c254de16a1d14c1ac931d3aa08dc88ac9fc582b compiling
/home/wfg/linux

2013-01-12-09:31:34 detecting boot state 3.2.0-rc3-bisect-00039-g6c254de #3 .1.2.3..............4..5....6..7....8...........9............OK .10...OK .11......OK .12....OK 13.OK .14............OK .OK 1516......OK .17OK .18....OK .19..........OK 20........OK .21........OK .22.....OK .OK .23...OK .24.......OK .25.....OK .OK 2627....OK .28OK .29..OK .30.............OK .31........OK .32........OK 33...OK 34..OK .OK 3536........OK 37..........OK .OK 3839OK .40....OK .41.............OK .42........OK .43.......OK .44...OK .45.OK .46OK .47.......OK .48..........OK .49..OK 50.OK .51.OK 52..OK .53..........OK .54............OK .55.......OK .56.OK .OK .57...OK .58...OK .59...............OK 60OK .61OK .OK 6263............OK .64..................OK .65......OK .66..OK .67..OK .6869....................................OK .70..................OK .71......OK .72..OK .73..OK ..74.............................................................................................................................................................................................................................................................................................................................................................................OK .....................................................................................................................................................................................................................................................................................................................................................................75...................................................................................OK ....OK 76777879..OK .80..OK ...81...............................................................OK .OK .OK 828384.OK .85.OK 86..OK .8788................................................................OK .OK .8990OK 91.92OK .9394.OK 95..................................................................OK .OK .OK 96OK 979899OK .100.OK .101...................................................................OK .OK .OK .OK .OK 102OK .OK 103104OK 105106107.................................................................OK .108.OK .109110OK .OK SUCCESS
Bisecting: 941 revisions left to test after this (roughly 10 steps)
[4723b984b227f3fd466cd56cd18bc0110fff5987] microblaze/PCI: use pci_scan_root_bus()
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-12-10:08:44 4723b984b227f3fd466cd56cd18bc0110fff5987 compiling
/home/wfg/linux

2013-01-12-10:10:15 detecting boot state 3.2.0-rc7-bisect-00140-g4723b98 #4 1....234..............................................................OK .5.OK .OK 67OK .OK 89..OK .OK 10OK ..111213.......................................................OK .14..OK .OK 1516.OK .17OK .OK .18..OK .OK 1920.OK .OK 21.2223.....................................................OK .OK 2425..OK .26.OK ..27.OK .28..OK 29OK .30OK .31OK .OK 3233......................................................OK .OK 3435.OK .OK .36.OK .37.OK .38..OK 39OK .OK 40OK .41OK 4243....................................................OK 44..OK .OK 4546..OK .47OK 48.OK 49.OK .50.OK .51OK .OK 5253OK .54.................................................OK 55..OK .OK 565758..OK ..59OK .60..OK .61OK .62.OK .OK 63OK .64.................................................OK .65..OK .OK 66.OK 6768OK .69.OK ..70...OK .71OK .72OK .73................................................OK 74.OK .75OK .OK 76OK 77OK 78....OK .79OK 8081OK 82.OK .83...............................................OK 84.OK .85OK .OK 86OK 87OK 8889....OK .OK 90OK .91OK 9293OK .94..................................................OK 95.OK .96OK 97OK .OK 98OK .99100...OK .101OK .OK .OK SUCCESS
Bisecting: 899 revisions left to test after this (roughly 10 steps)
[abbb18fb4ad7472ee2e1351f0ca12bce64cac143] regmap: return ERR_PTR instead of NULL in regmap_init
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-12-10:26:37 abbb18fb4ad7472ee2e1351f0ca12bce64cac143 compiling
/home/wfg/linux

2013-01-12-10:28:26 detecting boot state 3.2.0-rc1-bisect-00011-gabbb18f #5 .............................1......2..34..5..6.7...8.910............................................OK .11........OK 12OK 13.OK .OK 1415.OK .16.OK .OK 1718OK .OK 1920.........................................OK .21.......OK 22OK .23.OK 24OK .25OK .OK 2627.OK 28OK 29....OK .30OK 31.....................................OK .32.......OK .33OK 34.OK .OK 3536OK .OK .OK 3738OK .OK 3940....OK .OK 4142......................................OK 43........OK 44OK 45..OK 46OK .47OK 4849..OK .OK 5051....OK 52OK 53................................................................................................................................................................................OK ..................................................................................................................................................................................................................................................................................................................................54.55..............................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................OK .......................................................................................................................................................................................................................................................5657.........................................................................OK 58..OK .OK 5960..................................................................OK 61OK 62..OK .OK 6364.OK .65..............................................................OK .OK .OK 66..OK .OK .6768OK .69...............................................................OK .70..OK 71OK 72OK 73.OK 74OK .OK 75..........................................................OK 7677.OK .OK 78OK 798081....OK 82OK .OK .83........................................................OK .OK 8485.OK 86OK .OK .8788.OK .89OK .90OK .OK .9192.......................................................OK .93..OK 94OK 9596OK 97...OK .OK 9899OK .100OK .101..OK .102...................................................OK .103.OK .OK 104OK 105OK 106107...OK 108OK 109110OK .111OK SUCCESS
Bisecting: 896 revisions left to test after this (roughly 10 steps)
[e8524b2f43ab6747518aef81c709d104c478b1cd] x86, apic: Add probe() for apic_flat
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-12-11:27:00 e8524b2f43ab6747518aef81c709d104c478b1cd compiling
/home/wfg/linux

2013-01-12-11:28:36 detecting boot state 3.2.0-rc4-bisect-00163-ge8524b2 #6 ..................................................1.2..3........OK 4OK 56....OK 7..OK 8...............................................OK .OK 9OK 1011.OK .12........OK .13OK 14OK 151617....OK 18...................................................OK .OK 19OK 2021........OK 22..OK .OK 23OK 242526.OK 27...................................................OK .OK 28OK .29........OK 30..OK .OK 3132OK .33OK .34OK .35.OK 36.................................................OK .37.OK .38OK .39...OK .40.OK .41OK 42.OK .43OK .OK 4445.OK .46................................................OK .47..OK 48OK .49.OK 50.OK 51..OK .52OK 5354OK .55..OK .56OK 57.................................................OK 58..OK .59OK .60OK .OK 61OK 6263..OK .64OK .65OK .OK 6667.OK .OK 6869.................................................OK 70..OK 71.OK .72OK .OK 73OK .74.OK .75.OK 76OK .77OK .78.OK 79OK .80................................................OK .81OK 82.OK 83...OK .84OK .85.....OK .86OK .OK 87.OK 88..................................................OK .89OK 90OK .91....OK .92OK .93....OK ..94OK .95.OK .OK 96.OK .97.............................................OK .98OK 99OK .100....OK .OK 101OK .102.....OK SUCCESS
Bisecting: 896 revisions left to test after this (roughly 10 steps)
[301b195db179241da8be25f345f3c4e64960f1d5] perf evlist: Fix errno value reporting on failed mmap
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-12-11:45:36 301b195db179241da8be25f345f3c4e64960f1d5 compiling
/home/wfg/linux

2013-01-12-11:47:10 detecting boot state 3.2.0-rc1-bisect-00408-g301b195 #7 .123......................................4........5.6..........OK 78.OK .9.OK .OK 1011OK .12..OK .13OK ..14................................OK 15........OK .16OK .17.............OK .OK 18OK 1920OK .21.OK 22OK 23....OK .OK 2425...............................OK .26............OK 27OK .28.........OK .OK 2930OK .31OK .32.OK .OK 3334OK .35....OK .36OK .37..........................OK .38............OK 39....OK .40......OK 4142....OK .43.OK 44..OK 4546OK .47.OK .OK 4849..........................OK .50........OK 51....OK .........OK .52......OK .53.......................................................................OK .54.......................................................................OK .OK 5556.OK .OK .5758..................................................................OK .OK 5960OK .OK 61OK 6263..OK ...6465................................................................OK .OK 66OK .OK 67OK 6869.OK .70.OK .OK 71.72...........................................................OK 73OK 74OK 75OK .OK 7677.....OK .OK 7879OK .80OK .81...................................................OK .82..OK .OK 83OK 84OK 85OK ..86OK .87...OK .88...OK .OK 8990OK .91...............................................OK .92......OK .OK 93OK .OK 94.OK .OK 95OK 9697....OK 98...OK .OK 99100OK .101............................................OK .102.....OK .103OK .OK SUCCESS
Bisecting: 889 revisions left to test after this (roughly 10 steps)
[9f9df00accb343f61a5782904af10366a18ebb5a] ARM: 7236/1: vic: always use simple ops
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-12-12:07:32 9f9df00accb343f61a5782904af10366a18ebb5a compiling
/home/wfg/linux

2013-01-12-12:09:05 detecting boot state 3.2.0-rc4-bisect-00120-g9f9df00 #8 ..12..34...5.6.7...............................................OK .8.........OK .OK 910.OK .OK .OK 1112.OK .13..OK .14OK .15.OK 16................................................OK .17.....OK .18..OK .19OK 2021.OK .22.OK .23OK .24.OK .25...............................................OK .26..........OK .OK 272829.OK .OK .30OK 31OK .32...OK .33.OK .34...........................................OK .35.....................OK .3637.OK 38...OK 39..........................................................OK .40..OK .41..OK 4243.OK .OK 4445.OK .46.......................................................OK .47..OK .48..OK .49..OK .OK 50..OK .5152.OK .53...................................................OK .54..OK .55...OK 56......OK .OK .57..OK .OK 5859.OK .60...............................................OK .61..OK 62.......OK 6364...OK .OK .6566OK .OK 6768OK .69OK .70.............................................OK .71..OK .72......OK .73.OK .74OK .75.....OK 7677OK .OK 7879OK .80OK .81.........................................OK 82.......OK .83..OK .84.....OK .OK 8586......OK .OK 87OK 88.89OK .OK 9091.....................................OK .92......OK .93.......OK 94..OK .OK 9596..........OK 97OK .OK .9899OK .100..................................OK 101.......OK .102......OK .103.OK .OK 104105106.....OK .107....OK .OK 108OK .109...OK SUCCESS
Bisecting: 889 revisions left to test after this (roughly 10 steps)
[2d5503b624736abfe0e0bad281f9b8d8a705b930] iommu/amd: Add routines to bind/unbind a pasid
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-12-12:28:46 2d5503b624736abfe0e0bad281f9b8d8a705b930 compiling
/home/wfg/linux

2013-01-12-12:30:17 detecting boot state 3.2.0-rc5-bisect-00018-g2d5503b #9 ..............................1...........2.......3.4.5...6...OK .7OK .OK 8..OK .OK .9.............................OK .10.......OK 11..........OK 12OK .13..OK 1415......OK .16OK 17.OK .18...OK .19..............................OK .20......OK .21.......OK .22OK 23....OK .OK 2425.......OK .26.OK ..27.OK ..28.................................OK .29..OK .30...OK .31........OK .32OK .33.OK .34.........OK .3536.OK 37..OK .OK 3839................................OK .OK 40...OK .41........OK .42.OK .43OK .44.........OK .45..OK .OK 4647OK .OK 4849................................OK 5051...OK .52........OK .53.OK .54OK .55.........OK .56..OK .OK 5758OK .OK 5960..OK .61................................OK .62...OK .63OK .64.........OK .65OK .66.........OK 67...OK .OK 6869OK .70..OK .71............................OK .72..OK .OK 7374OK .75..............OK 76OK .77..........OK 78OK .79OK .OK 8081.OK .82................................OK .83.OK .84OK 85............OK .86....OK .87.....OK 88OK .8990OK .OK 9192.OK 93................................OK .OK 9495.OK 96OK .97................OK .98....OK .99...OK 100.OK .OK 101102.OK .OK 103104.OK 105.............................OK .106...OK SUCCESS
Bisecting: 871 revisions left to test after this (roughly 10 steps)
[813abbbaa3750c561f8ed7560664e652997be3dc] xen-netback: make ops structs const
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-12-12:46:50 813abbbaa3750c561f8ed7560664e652997be3dc compiling
/home/wfg/linux

2013-01-12-12:48:21 detecting boot state 3.2.0-bisect-01997-g813abbb #10 .1.2...............3.4..........5.678......9......................OK .10OK .11...OK .12OK .13..............OK .14.....OK 15.....OK 16.OK .OK 17OK 1819OK .20OK 21..........................OK 22.OK .23...OK .24OK 25...............OK .26.....OK 27.....OK .28OK .29...OK .30OK 31.OK 32OK .33........................OK .OK 3435...OK .36..................OK 37......OK 38.OK 3940.....OK .OK 4142OK .43OK .44........................OK .OK 4546...OK 47...OK .48.............OK .49.....OK .50...OK 51OK .52.....OK 53OK 5455OK .56....................OK .OK 5758...OK .59..OK .60..............OK .61.....OK .62...OK .OK 6364.....OK .OK 6566.OK .67....................OK .68....OK 6970..OK .71...............OK .72.....OK 73.....OK .7475........OK .76OK .77OK .78................OK .79...OK .OK 8081..................OK .82.OK 83..........OK .84.OK .85.........OK .OK 8687.OK 88...................OK 89..OK 90.OK .91OK 92.................OK .93OK 94........OK .95.OK .96..........OK .97OK .OK .98.................OK .99.OK 100...OK .101.OK 102...........OK 103....OK .104.......OK .105......OK .106..OK 107...OK .108....OK .OK 109110.............OK 111.OK SUCCESS
Bisecting: 791 revisions left to test after this (roughly 10 steps)
[66655760bf38861299e3c8196f5303f886b0eef9] backlight: use kstrtoul()
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-12-13:03:54 66655760bf38861299e3c8196f5303f886b0eef9 compiling
2013-01-12-13:04:41 66655760bf38861299e3c8196f5303f886b0eef9 SKIP BROKEN BUILD
/usr/bin/make -C source O=/cc/wfg/linux-bisect-x86_64 ARCH=x86_64 distclean
make: Entering directory `/c/wfg/linux'
CLEAN .
CLEAN arch/x86/kernel/cpu
CLEAN arch/x86/kernel
CLEAN arch/x86/vdso
CLEAN arch/x86/lib
CLEAN firmware
CLEAN kernel
CLEAN lib
CLEAN usr
CLEAN Documentation/accounting
CLEAN Documentation/auxdisplay
CLEAN Documentation/connector
CLEAN Documentation/filesystems
CLEAN Documentation/ia64
CLEAN Documentation/laptops
CLEAN Documentation/networking/timestamping
CLEAN Documentation/networking
CLEAN Documentation/pcmcia
CLEAN Documentation/spi
CLEAN Documentation/timers
CLEAN Documentation/vm
CLEAN Documentation/watchdog/src
CLEAN arch/x86/boot/compressed
CLEAN arch/x86/boot
CLEAN .tmp_versions
CLEAN vmlinux System.map .tmp_kallsyms1.S .tmp_kallsyms1.o .tmp_kallsyms2.S .tmp_kallsyms2.o .tmp_vmlinux1 .tmp_vmlinux2 .tmp_System.map
CLEAN scripts/basic
CLEAN scripts/kconfig
CLEAN scripts/mod
CLEAN scripts
CLEAN include/config usr/include include/generated arch/x86/include/generated
CLEAN .config .config.old .version include/linux/version.h Module.symvers
make: Leaving directory `/c/wfg/linux'
Bisecting: 791 revisions left to test after this (roughly 10 steps)
[63e496340f07b58925f690451c93171d9b04fe1e] clocksource: parisc: Convert to clocksource_register_hz/khz
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-12-13:05:08 63e496340f07b58925f690451c93171d9b04fe1e compiling
/home/wfg/linux

2013-01-12-13:06:40 detecting boot state 3.1.0-rc1-bisect-00037-g63e4963 #1 ...1...........2.....3.4..5.............6..7..............8.......OK 910...OK .11OK .12.....OK 13..........OK 14......OK .OK 1516.OK .17.........OK .18OK .19.............OK .20.......OK 21OK 2223....OK .24.....OK .25.........OK 26..OK .OK 2728.OK .29.............OK .30.OK 31..............OK .32......OK .OK 333435....OK 36.....OK .37.........OK .38..OK 39OK .40.OK .41............OK .42.OK 43..............OK .44.......OK .OK 4546........OK .47.OK .48........OK .49..OK 50...OK .OK 5152...........OK .53.OK .54.............OK .55....OK .56.OK .57OK .58.......OK .59.OK .60.........OK .61.OK .62...OK 63OK 64............OK 65.OK .66.............OK .67........OK .68.OK .69OK 70...OK .71.OK .72........OK .73.OK .74..OK .75OK .76..........OK .77.OK 78.............OK .79........OK .80...OK .81OK .82.OK .83.OK .84........OK .85..OK 86...OK .OK 8788........OK 89.....OK .90.............OK .91........OK .92...OK .OK 93OK 9495....OK .96.........OK 97..OK 98...OK 99OK .100.......OK .101.....OK 102..............OK .103........OK .104OK .105.OK .106.OK 107.....OK 108.........OK .109.OK 110...OK SUCCESS
Bisecting: 789 revisions left to test after this (roughly 10 steps)
[6b3da11b3c36fdafce3a72e0e90d6c4e99e9aad5] Merge branch 'for-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-12-13:21:14 6b3da11b3c36fdafce3a72e0e90d6c4e99e9aad5 compiling
2013-01-12-13:22:06 6b3da11b3c36fdafce3a72e0e90d6c4e99e9aad5 SKIP BROKEN BUILD
/usr/bin/make -C source O=/cc/wfg/linux-bisect-x86_64 ARCH=x86_64 distclean
make: Entering directory `/c/wfg/linux'
CLEAN .
CLEAN arch/x86/kernel/cpu
CLEAN arch/x86/kernel
CLEAN arch/x86/vdso
CLEAN arch/x86/lib
CLEAN firmware
CLEAN kernel
CLEAN lib
CLEAN usr
CLEAN Documentation/accounting
CLEAN Documentation/auxdisplay
CLEAN Documentation/connector
CLEAN Documentation/filesystems
CLEAN Documentation/ia64
CLEAN Documentation/laptops
CLEAN Documentation/networking/timestamping
CLEAN Documentation/networking
CLEAN Documentation/pcmcia
CLEAN Documentation/spi
CLEAN Documentation/timers
CLEAN Documentation/vm
CLEAN Documentation/watchdog/src
CLEAN arch/x86/boot/compressed
CLEAN arch/x86/boot
CLEAN .tmp_versions
CLEAN vmlinux System.map .tmp_kallsyms1.S .tmp_kallsyms1.o .tmp_kallsyms2.S .tmp_kallsyms2.o .tmp_vmlinux1 .tmp_vmlinux2 .tmp_System.map
CLEAN scripts/basic
CLEAN scripts/kconfig
CLEAN scripts/mod
CLEAN scripts
CLEAN include/config usr/include include/generated arch/x86/include/generated
CLEAN .config .config.old .version include/linux/version.h Module.symvers
make: Leaving directory `/c/wfg/linux'
Bisecting: 789 revisions left to test after this (roughly 10 steps)
[e6171bbe4d5683960221d42c87195cbd366de4bf] blackfin: time-ts: rm unused func broadcast_timer_setup()
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-12-13:22:14 e6171bbe4d5683960221d42c87195cbd366de4bf compiling
2013-01-12-13:23:01 e6171bbe4d5683960221d42c87195cbd366de4bf SKIP BROKEN BUILD
/usr/bin/make -C source O=/cc/wfg/linux-bisect-x86_64 ARCH=x86_64 distclean
make: Entering directory `/c/wfg/linux'
CLEAN .
CLEAN arch/x86/kernel/cpu
CLEAN arch/x86/kernel
CLEAN arch/x86/vdso
CLEAN firmware
CLEAN kernel
CLEAN lib
CLEAN usr
CLEAN .tmp_versions
CLEAN scripts/basic
CLEAN scripts/kconfig
CLEAN scripts/mod
CLEAN scripts
CLEAN include/config include/generated arch/x86/include/generated
CLEAN .config .config.old .version include/linux/version.h
make: Leaving directory `/c/wfg/linux'
Bisecting: 789 revisions left to test after this (roughly 10 steps)
[be726ffd1ef291c04c4d6632ac277afa1c281712] sched/accounting: Fix parameter passing in task_group_account_field
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-12-13:23:10 be726ffd1ef291c04c4d6632ac277afa1c281712 compiling
/home/wfg/linux

2013-01-12-13:24:45 detecting boot state 3.2.0-rc1-bisect-00336-gbe726ff #1 ..OK .1..OK 2........OK .3........OK 4OK 56........OK .7...OK .8OK .9........OK .10.OK 11..................OK .12.....OK 13.....OK .14.......OK .OK 15OK .16........OK .17...OK 18.OK .OK .19.......OK .20.OK .21.................OK 22......OK 23.OK .24...........OK .25OK .26........OK .27...OK .28.OK .29..OK 30....OK .31OK .32................OK .33.....OK 34..OK 35...........OK .36.OK .37...........OK .OK 3839..OK .40.OK 41....OK .42.OK 43.................OK .44.....OK 45..OK 46...........OK .47.OK .48..OK .49........OK .50..OK .51.OK 52.....OK 53.OK .54.................OK 55......OK 56..OK 57............OK 58.OK .59.....OK .60.OK 61...OK .62.OK .63.OK .64....OK .65.OK .66...............OK .67.....OK .68.OK 69...........OK .70.OK .71......OK .72OK .73..OK .OK 7475.....OK 76...OK 77OK 78...................OK 79....OK .OK 8081..............OK .82.OK 83........OK .84OK .85OK .OK 8687....OK 88....OK .89.OK .90...........OK .91.......OK .OK 9293..............OK .94.OK 95........OK .96OK .97....OK .98OK SUCCESS
Bisecting: 776 revisions left to test after this (roughly 10 steps)
[57e964e1ae9bd4f699ae1074430bcf81a9a11377] Merge tag 'fixes-non-critical' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-12-13:38:09 57e964e1ae9bd4f699ae1074430bcf81a9a11377 compiling
2013-01-12-13:38:56 57e964e1ae9bd4f699ae1074430bcf81a9a11377 SKIP BROKEN BUILD
/usr/bin/make -C source O=/cc/wfg/linux-bisect-x86_64 ARCH=x86_64 distclean
make: Entering directory `/c/wfg/linux'
CLEAN .
CLEAN arch/x86/kernel/cpu
CLEAN arch/x86/kernel
CLEAN arch/x86/vdso
CLEAN arch/x86/lib
CLEAN firmware
CLEAN kernel
CLEAN lib
CLEAN usr
CLEAN Documentation/accounting
CLEAN Documentation/auxdisplay
CLEAN Documentation/connector
CLEAN Documentation/filesystems
CLEAN Documentation/ia64
CLEAN Documentation/laptops
CLEAN Documentation/networking/timestamping
CLEAN Documentation/networking
CLEAN Documentation/pcmcia
CLEAN Documentation/spi
CLEAN Documentation/timers
CLEAN Documentation/vm
CLEAN Documentation/watchdog/src
CLEAN arch/x86/boot/compressed
CLEAN arch/x86/boot
CLEAN .tmp_versions
CLEAN vmlinux System.map .tmp_kallsyms1.S .tmp_kallsyms1.o .tmp_kallsyms2.S .tmp_kallsyms2.o .tmp_vmlinux1 .tmp_vmlinux2 .tmp_System.map
CLEAN scripts/basic
CLEAN scripts/kconfig
CLEAN scripts/mod
CLEAN scripts
CLEAN include/config usr/include include/generated arch/x86/include/generated
CLEAN .config .config.old .version include/linux/version.h Module.symvers
make: Leaving directory `/c/wfg/linux'
Bisecting: 776 revisions left to test after this (roughly 10 steps)
[2c1c7430390ec2148499a3b8f72e37ff5483056e] powerpc: fix compile error with 85xx/p1023_rds.c
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-12-13:39:06 2c1c7430390ec2148499a3b8f72e37ff5483056e compiling
/home/wfg/linux

2013-01-12-13:40:38 detecting boot state 3.2.0-rc3-bisect-00198-g2c1c743 #1 ....OK 1OK .2.......OK 3....OK .4OK .5OK 6....OK .7OK 8...OK 9...........OK .10........OK .OK 1112..................OK 13OK .14.......OK 15.....OK 16OK .17OK 18....OK .19OK .20..OK 21...........OK .22........OK 2324.................OK .25OK .26......OK .27....OK .28OK .29OK 30....OK 31.....OK 32...........OK 33.........OK 3435..................OK .36OK .37......OK .38OK .39.....OK 40OK 41........OK 42.OK 4344..........OK .45........OK 4647...................OK 48OK .49......OK .50.OK .51....OK .OK 5253.......OK .54OK .55...........OK 56.........OK 57...................OK .58OK 59.........OK .60OK 61....OK 62OK 63........OK 64.OK .65..........OK 66........OK .OK 67...................OK .68OK .69.........OK 70OK 71OK .72...OK .73.......OK .74OK .OK 75..........OK .76.......OK .77...OK .78...............OK 79.OK 80.........OK 81OK .OK 8283.......OK .84...OK .85OK .OK .86.........OK .87.......OK .88...OK 89................OK 90.OK 91.........OK 92OK .93OK 94.......OK .95...OK .OK 9697OK .98..........OK 99........OK 100...OK SUCCESS
Bisecting: 743 revisions left to test after this (roughly 10 steps)
[acc952c1f373bf3f66cc7a10680eee1762bed40b] Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-12-13:54:19 acc952c1f373bf3f66cc7a10680eee1762bed40b compiling
2013-01-12-13:55:06 acc952c1f373bf3f66cc7a10680eee1762bed40b SKIP BROKEN BUILD
/usr/bin/make -C source O=/cc/wfg/linux-bisect-x86_64 ARCH=x86_64 distclean
make: Entering directory `/c/wfg/linux'
CLEAN .
CLEAN arch/x86/kernel/cpu
CLEAN arch/x86/kernel
CLEAN arch/x86/vdso
CLEAN arch/x86/lib
CLEAN firmware
CLEAN kernel
CLEAN lib
CLEAN usr
CLEAN Documentation/accounting
CLEAN Documentation/auxdisplay
CLEAN Documentation/connector
CLEAN Documentation/filesystems
CLEAN Documentation/ia64
CLEAN Documentation/laptops
CLEAN Documentation/networking/timestamping
CLEAN Documentation/networking
CLEAN Documentation/pcmcia
CLEAN Documentation/spi
CLEAN Documentation/timers
CLEAN Documentation/vm
CLEAN Documentation/watchdog/src
CLEAN arch/x86/boot/compressed
CLEAN arch/x86/boot
CLEAN .tmp_versions
CLEAN vmlinux System.map .tmp_kallsyms1.S .tmp_kallsyms1.o .tmp_kallsyms2.S .tmp_kallsyms2.o .tmp_vmlinux1 .tmp_vmlinux2 .tmp_System.map
CLEAN scripts/basic
CLEAN scripts/kconfig
CLEAN scripts/mod
CLEAN scripts
CLEAN include/config usr/include include/generated arch/x86/include/generated
CLEAN .config .config.old .version include/linux/version.h Module.symvers
make: Leaving directory `/c/wfg/linux'
Bisecting: 743 revisions left to test after this (roughly 10 steps)
[c84cdf75ccb2845f690579e838f13f7e744e3d23] cgroup: Remove unnecessary task_lock before fetching css_set on migration
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-12-13:55:17 c84cdf75ccb2845f690579e838f13f7e744e3d23 compiling
/home/wfg/linux

2013-01-12-13:56:51 detecting boot state 3.2.0-rc2-bisect-00489-gc84cdf7 #1 OK ........OK .1..OK .2.......OK .3...............OK 4..OK .5...........OK .6.....OK .7....OK .8.OK .9...OK 10.....OK .11..OK .12.......OK .13..............OK .14...OK .15..........OK .OK 1617....OK .18....OK .19..OK .20..OK .21OK .22.......OK .23.......OK 24...............OK 2526...........OK .27...OK 2829....OK .30.......OK .31..OK .32OK .33.OK 34.....OK .35......OK .36..........................OK .37......OK 3839..OK 40......OK .OK 41......OK .42..OK .43..OK .44......OK .45........................OK .46..OK .47......OK .48..OK 49.......OK .50.....OK .51..OK .52..OK .53..OK .54............................OK .55..OK .56.....OK .57.OK .58......OK .59.OK .60......OK 61...OK 62...OK 63..............................OK .64.OK .65......OK .66OK .67.......OK .68.OK .69......OK .70...OK 71..OK .72..............................OK 7374.OK .75.....OK .OK 7677.OK .78......OK 79..OK .80..............................................................................OK .OK ................................81...................................................................OK .82.OK .OK 8384.OK 85OK .86..............................................................OK .OK 8788OK .89OK 90.OK .91OK .OK 929394.......................................................................................................OK .95.....................................................................OK 96..OK .OK ...97OK 98.99..............................................................OK 100......OK .OK SUCCESS
Bisecting: 743 revisions left to test after this (roughly 10 steps)
[3b7f993394db7c446c251fb8eb32ec501a330acc] [S390] make arch/s390 subdirectories depend on config option
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-12-14:20:18 3b7f993394db7c446c251fb8eb32ec501a330acc compiling
/home/wfg/linux

2013-01-12-14:21:47 detecting boot state 3.2.0-rc7-bisect-00030-g3b7f993 #2 .1.2..3........................................................OK .4OK .OK 56..OK 7....OK .8.OK .OK .91011.....................................................OK .12.OK 13OK 14..OK .15....OK .16.OK .17....OK .18.................................................OK .19.OK 2021..OK 22.........OK 23..OK .24OK .25..OK .26.............................................OK 27.OK .OK 2829.OK .30........OK .OK 31OK .32..OK .33.................................................OK 34.OK .OK 3536..OK .37......OK .OK .OK 38OK .394041OK ..42...............................................OK 4344.OK 45OK 46...OK 47...........OK .OK 48OK 4950OK .51.OK .52......................................OK ..53.OK .54OK .55OK .56...............OK .OK 57.OK .58..OK 59OK .60.OK .61......................................OK 62OK 63OK 6465...OK .66............OK .67...OK .68.OK 69..OK .70OK .71.OK .72...................................OK 73OK .OK 74OK 7576....OK .77.......OK .78.......OK 79.OK .80..OK 81.OK .82.OK 83..................................OK 84.OK .85.OK 8687.....OK 88.......OK .89...OK .90OK .91....OK .OK 9293OK .94..................................OK .95OK .96.OK .97.....OK .98............OK 99OK 100.OK .101.OK .102.....OK .103OK 104105...............................OK .OK SUCCESS
Bisecting: 743 revisions left to test after this (roughly 10 steps)
[f5132b01386b5a67f1ff673bb2b96a507a3f7e41] KVM: Expose a version 2 architectural PMU to a guests
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-12-14:40:13 f5132b01386b5a67f1ff673bb2b96a507a3f7e41 compiling
/home/wfg/linux

2013-01-12-14:41:42 detecting boot state 3.2.0-rc7-bisect-00154-gf5132b0 #3 1.2.3.....4................5.6.7.89.10......11...........................OK .OK 1213..OK .14....OK .15............OK .16...OK .17....OK .18.OK .1920OK 21.....OK .22...................OK .23..OK .OK 24.25.OK .26....OK .27................OK .OK 2829........OK 30..OK .OK 31OK 3233..........................OK .34..OK .35OK .36..OK 37.....OK .38................OK 39OK .40.......OK .OK .4142..OK .43.....................OK .44..OK .45OK .46.OK .47.....OK 48.................OK .49...OK .50.....OK 51..OK .OK 5253..OK .54.....................OK .55..OK .56OK .5758...OK .59................OK .60.......OK .61.....OK .62...OK .6364................OK 65.........OK .OK 6667.OK .68....OK 69.................OK 70....OK 71.........OK .72OK 7374..OK ..75...........OK .76.........OK 77...OK .OK 7879......OK .80............OK .81...OK .82.............OK .OK 83OK .OK 8485..OK .86.......OK 87........OK .88....OK .89.OK .90.......OK .91........OK .92....OK 93...............OK .94.OK .95OK 96.97.OK .98.......OK 99.........OK 100....OK .101..OK .102............OK .103........OK 104...........OK 105....OK .106OK .OK 107....OK .108......OK .109....OK .110...OK .111...OK .112..OK .113...........OK SUCCESS
Bisecting: 750 revisions left to test after this (roughly 10 steps)
[8c939402e43b21ea8ac031b7f751fa0c6b0faf00] unicore32: standardize /proc/iomem "Kernel code" name
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-12-14:58:03 8c939402e43b21ea8ac031b7f751fa0c6b0faf00 compiling
2013-01-12-14:58:45 8c939402e43b21ea8ac031b7f751fa0c6b0faf00 SKIP BROKEN BUILD
/usr/bin/make -C source O=/cc/wfg/linux-bisect-x86_64 ARCH=x86_64 distclean
make: Entering directory `/c/wfg/linux'
CLEAN .
CLEAN arch/x86/kernel/cpu
CLEAN arch/x86/kernel
CLEAN arch/x86/vdso
CLEAN arch/x86/lib
CLEAN firmware
CLEAN kernel
CLEAN lib
CLEAN usr
CLEAN Documentation/accounting
CLEAN Documentation/auxdisplay
CLEAN Documentation/connector
CLEAN Documentation/filesystems
CLEAN Documentation/ia64
CLEAN Documentation/laptops
CLEAN Documentation/networking/timestamping
CLEAN Documentation/networking
CLEAN Documentation/pcmcia
CLEAN Documentation/spi
CLEAN Documentation/timers
CLEAN Documentation/vm
CLEAN Documentation/watchdog/src
CLEAN arch/x86/boot/compressed
CLEAN arch/x86/boot
CLEAN .tmp_versions
CLEAN vmlinux System.map .tmp_kallsyms1.S .tmp_kallsyms1.o .tmp_kallsyms2.S .tmp_kallsyms2.o .tmp_vmlinux1 .tmp_vmlinux2 .tmp_System.map
CLEAN scripts/basic
CLEAN scripts/kconfig
CLEAN scripts/mod
CLEAN scripts
CLEAN include/config usr/include include/generated arch/x86/include/generated
CLEAN .config .config.old .version include/linux/version.h Module.symvers
make: Leaving directory `/c/wfg/linux'
Bisecting: 750 revisions left to test after this (roughly 10 steps)
[8c3b2296f1aa13d7504d2c09bc819cef3759562a] Merge branch 'imx/clk' into next/clk
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-12-14:58:54 8c3b2296f1aa13d7504d2c09bc819cef3759562a compiling
/home/wfg/linux

2013-01-12-15:00:20 detecting boot state 3.2.0-rc7-bisect #1 .1.....2.............34...5................6..........7..8.9...........OK 10.OK .11OK 12.......OK .13..........OK 14.OK .15....OK .16..........OK .17..OK .18......OK 19....OK .OK 2021...........OK .22OK .23..........OK .24..........OK .25OK .26....OK .27..........OK .28...OK .29.....OK .30...OK .OK .3132...........OK 33OK .OK .34......OK 35..............OK .36OK .37....OK .38.......OK .39..OK .40.....OK .41........OK .OK 4243.....OK .44...OK 45OK 46....OK .47................OK .48OK .49...OK 50........OK .51..OK .52........OK .53....OK .OK 5455......OK 56...OK .OK 5758....OK .59....................OK .OK 6061...OK .62.......OK .63...OK .64....OK .65....OK .66...OK .67.....OK .68...OK .OK 6970OK 71....................OK .72....OK .73...OK .74.......OK .75...OK 76....OK .77.OK .78......OK .79.OK .80....OK .81OK 82....................OK .83........OK .OK 8485...........OK .OK 86...OK 87....OK .88......OK 89.OK .90....OK .OK .91...OK .92................OK 93.........OK 94OK .95..........OK .OK .9697.OK .98...OK .99......OK .100.OK 101.....OK .102..OK .103OK 104................OK 105.............OK SUCCESS
Bisecting: 736 revisions left to test after this (roughly 10 steps)
[4d447c9a6ebc0142d320f075c5bac6d202a79fd4] net/hyperv: Add support for jumbo frame up to 64KB
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-12-15:15:20 4d447c9a6ebc0142d320f075c5bac6d202a79fd4 compiling
/home/wfg/linux

2013-01-12-15:16:49 detecting boot state 3.2.0-rc5-bisect-00469-g4d447c9 #2 1..2......3....4..5....6........7.8.....9...10.....11....12.....................OK .13.OK 14..OK .15.......OK .16.OK .17...OK .18.........OK .19....OK .20...OK .21...OK .22.........................OK .23.OK .24.OK 25.......OK .OK 2627...OK .28........OK .29....OK .30...OK .31.......OK .32.....................OK .33....OK .OK 3435......OK .36..OK .37....OK .38.......OK .39.OK .40.OK .41...OK .42...OK .43.........................OK .44.OK .45.OK .46.......OK .47...OK .48....OK .49.OK .50...OK .51.....OK .52..OK .53...OK .54.........................OK .55..OK .56.OK 57.......OK .58...OK 59.OK .60.OK .61OK 62.......OK 63.....OK 64....OK 65....OK .66....................OK .67..OK .68.OK .69......OK .70...OK 71..OK 72..OK .OK 7374......OK .75........OK .OK 7677.......OK .78.................OK 79..OK .80.....OK .81......OK .82..OK 83OK .84OK .85...OK .86..OK .87........OK .88...OK .89...OK ..90................OK 91..OK .92..........OK .93.....OK .OK 9495..OK .OK 9697OK .98.......OK .99....OK .100.......OK 101....OK .102...........OK .103...OK .104.........OK .105.........OK .OK 106107...OK .108OK 109110.......OK .111....OK .112.......OK SUCCESS
Bisecting: 703 revisions left to test after this (roughly 10 steps)
[7287be1d0ac8c82999b67c2a33517c6ec9cfdbe7] drivers/rtc/rtc-mxc.c: fix setting time for MX1 SoC
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-12-15:32:19 7287be1d0ac8c82999b67c2a33517c6ec9cfdbe7 compiling
2013-01-12-15:33:07 7287be1d0ac8c82999b67c2a33517c6ec9cfdbe7 SKIP BROKEN BUILD
/usr/bin/make -C source O=/cc/wfg/linux-bisect-x86_64 ARCH=x86_64 distclean
make: Entering directory `/c/wfg/linux'
CLEAN .
CLEAN arch/x86/kernel/cpu
CLEAN arch/x86/kernel
CLEAN arch/x86/vdso
CLEAN arch/x86/lib
CLEAN firmware
CLEAN kernel
CLEAN lib
CLEAN usr
CLEAN Documentation/accounting
CLEAN Documentation/auxdisplay
CLEAN Documentation/connector
CLEAN Documentation/filesystems
CLEAN Documentation/ia64
CLEAN Documentation/laptops
CLEAN Documentation/networking/timestamping
CLEAN Documentation/networking
CLEAN Documentation/pcmcia
CLEAN Documentation/spi
CLEAN Documentation/timers
CLEAN Documentation/vm
CLEAN Documentation/watchdog/src
CLEAN arch/x86/boot/compressed
CLEAN arch/x86/boot
CLEAN .tmp_versions
CLEAN vmlinux System.map .tmp_kallsyms1.S .tmp_kallsyms1.o .tmp_kallsyms2.S .tmp_kallsyms2.o .tmp_vmlinux1 .tmp_vmlinux2 .tmp_System.map
CLEAN scripts/basic
CLEAN scripts/kconfig
CLEAN scripts/mod
CLEAN scripts
CLEAN include/config usr/include include/generated arch/x86/include/generated
CLEAN .config .config.old .version include/linux/version.h Module.symvers
make: Leaving directory `/c/wfg/linux'
Bisecting: 703 revisions left to test after this (roughly 10 steps)
[986b0c256b3b7920502969641a1cb6d2c525b750] Merge branch 'hwmod_data_devel_3.3' of git://git.pwsan.com/linux-2.6 into hwmod
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-12-15:33:19 986b0c256b3b7920502969641a1cb6d2c525b750 compiling
/home/wfg/linux

2013-01-12-15:34:56 detecting boot state 3.2.0-rc5-bisect-00011-g986b0c2 #1 123....4.....5........67........8........9.................10.......OK .11.OK .1213...OK .14OK .15....OK .16OK .17..........OK .18OK 19....OK .20.......OK .21................OK .22...........OK 23..OK .OK 2425....OK 26OK 27.....OK .28OK 29.......OK .30.OK .31.OK .32............OK .33............OK .34..........OK .35..OK .36....OK 37......OK .38.OK 39......OK .40.....OK .41.OK .42............OK .43............OK .44..........OK .45..OK .OK 4647...OK 48..OK .49.....OK 50......OK .51.....OK .OK 5253...............OK .54....OK .55..........OK .56..OK 57...OK .58...OK .OK 5960...........OK .61......OK .62.....OK .OK 6364.......OK 65........OK .66...............OK .67.OK .68...OK 69.OK 70..OK .7172.......OK .73.....OK .74.........OK .75OK 76.......OK .77....OK .78..............OK .79.....OK .80...OK 81OK .OK .82...........OK 83..OK .84........OK .85OK .86......OK .87....OK 88..........OK .89.....OK .90.........OK .OK 9192.OK .93..OK .94..........OK 95........OK .96OK 97.......OK 98....OK .99.........OK .OK 100101.................OK .OK 102103OK .OK 104105..............OK .106....OK .107....OK .108.......OK 109....OK .110......OK SUCCESS
Bisecting: 697 revisions left to test after this (roughly 10 steps)
[2a5ac6f7a9c0a24adcf68e0dd634afbe083191c1] isl29020: Remove a redundant semi-colon from return statement
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-12-15:50:29 2a5ac6f7a9c0a24adcf68e0dd634afbe083191c1 compiling
/home/wfg/linux

2013-01-12-15:51:56 detecting boot state 3.2.0-rc2-bisect-00008-g2a5ac6f #2 .........1...........2...34...............5.6...........7...........OK 8.OK 9...OK .10......OK .11..............OK .OK 1213.OK 14OK .15..............OK .OK 1617...........OK 18.....OK .19....OK .20.OK .21.........OK .22..........OK .OK 2324.....OK 25OK .OK 2627...........OK 28.OK .29...........OK .30.OK .31........OK .32.OK .33.....OK .34..............OK .35OK 36...OK .37OK .38OK .39.......OK .40.OK 41............OK .42.....OK .43...OK .44......OK .45.OK .46.............OK .47..OK .48OK .49...OK 50...OK .51..OK .52.OK 53.................OK .54.....OK .55...OK .56..OK 57..OK .58.........OK 59.......OK 60OK .61...OK .62..OK .63...OK .64OK .65................OK .66.........OK .67OK 68......OK 6970........OK .71......OK 72OK .73...OK .74...OK 75...OK .76OK .77................OK .78..........OK .OK 7980.....OK .81........OK .82......OK 83....OK .84...OK .OK 85....OK 86.....OK 87.............OK 88..........OK .89...OK .90.OK .91..OK .92.....OK .93.....OK .94...OK ..95..OK .OK 96OK 9798........OK .99............OK 100...........OK .101..OK .OK 102103.........OK 104.....OK .105..OK 106....OK SUCCESS
Bisecting: 697 revisions left to test after this (roughly 10 steps)
[d7a83c0f7f0f7a04710f31701f195018a4f5fdd3] fat: Spelling s/obsolate/obsolete/g
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-12-16:06:38 d7a83c0f7f0f7a04710f31701f195018a4f5fdd3 compiling
/home/wfg/linux

2013-01-12-16:08:06 detecting boot state 3.2.0-rc1-bisect-00334-gd7a83c0 #3 1...2.34.........5.................6......7....89........10.....OK .11.OK .12....OK .13..OK .14OK 15OK .16.........OK .17...............OK .18.....OK .19....OK .20.......OK .21.......OK 22.OK .23...OK .24...OK 25OK 26OK .27.........OK 28................OK .29.....OK .30....OK .3132......OK .33.......OK .34OK 35....OK .36..OK .37OK .OK 3839.........OK 40................OK .41.....OK .42.....OK 4344.......OK 45.....OK 46.OK .47.........OK .OK 48OK .OK 4950.........OK 51.................OK .52.....OK 53.....OK .54OK 55...OK 56......OK .57OK .58...........OK .OK 59OK 6061OK 62.........OK .63................OK 64.....OK .65.....OK .66OK .67..OK 68......OK .69OK .70...........OK .OK 71OK 72.OK 7374........OK .75................OK 76.....OK .77.....OK .OK 78OK .79......OK .80OK .81.............OK 82OK .83OK 84OK 85........OK .86...............OK .87.....OK 88......OK .89OK .OK .90......OK 91OK .92.........OK .OK 9394....OK 95OK .96........OK .97................OK .98....OK .99.....OK .100...OK 101......OK 102.OK .103........OK .104OK 105....OK .OK 106107........OK .108................OK SUCCESS
Bisecting: 697 revisions left to test after this (roughly 10 steps)
[d7bd1b8a6104bcdc53611689fec8715a236a22c8] Merge branch 'drivers/pxa-gpio' into next/drivers
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-12-16:22:47 d7bd1b8a6104bcdc53611689fec8715a236a22c8 compiling
/home/wfg/linux

2013-01-12-16:24:13 detecting boot state 3.2.0-rc6-bisect-00128-gd7bd1b8 #4 1.....2.......3...4...5..6..7........8.910........11.....12................OK .13....OK .14.....OK .15...OK 16...OK 17..OK .18OK .19........OK 20.OK 21OK 22........OK .23....OK 24.............OK 25.....OK .26..........OK .27..OK .28..OK 29..OK .30OK .31.......OK .32OK .OK 3334........OK 35....OK .36........OK .37........OK 38...............OK .OK 39......OK .40.OK 41OK 42......OK .43OK .44OK 45........OK .46....OK .47.......OK .48........OK .49...............OK .5051.....OK .52OK .OK 5354......OK 55.OK 56OK .57.......OK 58.....OK 59....OK 60.............OK .61................OK 62..OK .63..OK .64OK .OK 6566......OK 67OK .68OK .69.......OK 70.OK .71.......OK 72.............OK 73................OK .74..OK 75.....OK .OK 76OK 77.....OK .78....OK .79OK 80.....OK 81OK .82.....OK 83............OK .84...............OK .85.OK .86....OK .OK 87OK .88....OK .89.....OK .OK 9091.....OK 92OK .93.....OK .94.............OK 95................OK .96......OK .97.....OK .OK 9899100OK .101....OK .102OK .103....OK .104OK .105.....OK 106.............OK .107................OK 108..........OK 109110...OK .111OK SUCCESS
Bisecting: 681 revisions left to test after this (roughly 9 steps)
[ab8fabd46f811d5153d8a0cd2fac9a0d41fb593d] mm: exclude reserved pages from dirtyable memory
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-12-16:38:57 ab8fabd46f811d5153d8a0cd2fac9a0d41fb593d compiling
2013-01-12-16:39:42 ab8fabd46f811d5153d8a0cd2fac9a0d41fb593d SKIP BROKEN BUILD
/usr/bin/make -C source O=/cc/wfg/linux-bisect-x86_64 ARCH=x86_64 distclean
make: Entering directory `/c/wfg/linux'
CLEAN .
CLEAN arch/x86/kernel/cpu
CLEAN arch/x86/kernel
CLEAN arch/x86/vdso
CLEAN arch/x86/lib
CLEAN firmware
CLEAN kernel
CLEAN lib
CLEAN usr
CLEAN Documentation/accounting
CLEAN Documentation/auxdisplay
CLEAN Documentation/connector
CLEAN Documentation/filesystems
CLEAN Documentation/ia64
CLEAN Documentation/laptops
CLEAN Documentation/networking/timestamping
CLEAN Documentation/networking
CLEAN Documentation/pcmcia
CLEAN Documentation/spi
CLEAN Documentation/timers
CLEAN Documentation/vm
CLEAN Documentation/watchdog/src
CLEAN arch/x86/boot/compressed
CLEAN arch/x86/boot
CLEAN .tmp_versions
CLEAN vmlinux System.map .tmp_kallsyms1.S .tmp_kallsyms1.o .tmp_kallsyms2.S .tmp_kallsyms2.o .tmp_vmlinux1 .tmp_vmlinux2 .tmp_System.map
CLEAN scripts/basic
CLEAN scripts/kconfig
CLEAN scripts/mod
CLEAN scripts
CLEAN include/config usr/include include/generated arch/x86/include/generated
CLEAN .config .config.old .version include/linux/version.h Module.symvers
make: Leaving directory `/c/wfg/linux'
Bisecting: 681 revisions left to test after this (roughly 9 steps)
[2f2e3f6d7a24e7fceb0fef514767025cddb64dc2] hid-input/battery: make the battery setup common for INPUTs and FEATUREs
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-12-16:39:54 2f2e3f6d7a24e7fceb0fef514767025cddb64dc2 compiling
/home/wfg/linux

2013-01-12-16:41:28 detecting boot state 3.1.0-bisect-08921-g2f2e3f6 #1 ...1............2.....3.4......5.6...78......9............10................OK .11...........OK .12.....OK 13OK .14.....OK .15.OK 16..OK 17.OK .18.....OK .19...........OK .20...............OK .21...........OK .2223....OK .OK 24OK .25........OK .26.OK .27.OK .28OK .29.OK .30...........OK .31....................OK 32........OK .33..OK 34.....OK .35OK .OK 3637........OK .38OK 39OK .40......OK .41.......OK .42...................OK .43...........OK .OK 4445...OK .46..OK .47.OK .48....OK .OK .49OK .50.OK 51....OK .52.......OK 53........................OK 54........OK .55..OK 56OK .57..OK .58.....OK .59.OK .60...OK .OK 6162......OK .63..OK .64..........................OK .65........OK .OK 66....OK .67.....OK 68...OK .69..OK .70...OK .71.......OK .7273.........................OK .74.......OK 75...OK .OK 76OK 7778....OK .79..OK 80...OK .81...OK .82.......OK .83...OK .84......................OK 85.......OK .86OK .87......OK 88OK .89....OK .90.OK .91...OK 9293...OK 94....OK .95......OK .96.....................OK .97......OK 98OK .99....OK 100OK .101........OK .OK 102103......OK .OK 104105..OK .OK 106107.......OK .108........................OK .109..OK SUCCESS
Bisecting: 673 revisions left to test after this (roughly 9 steps)
[a2ecb155a30fea933cc539fc2064fef825fd9511] crypto: caam - fix polarity of "propagate error" logic
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-12-16:57:31 a2ecb155a30fea933cc539fc2064fef825fd9511 compiling
/home/wfg/linux

2013-01-12-16:59:03 detecting boot state 3.2.0-rc1-bisect-00045-ga2ecb15 #2 ..1..2.............3....4...5.6.78.....9............................OK .10OK 1112.OK .13.OK .14...........OK .15..OK .16..OK 17.OK .18.OK .OK .19...OK .20.............................OK .21..OK 22OK 2324OK .25..............OK .OK 26OK 2728.......OK .29..OK .OK 30.31..............................OK .OK .32.OK .33...OK 3435..............OK .OK 3637..OK .38....OK .39..OK .OK 4041............................OK 42OK .43.OK .44..OK .45...OK 46...............OK .OK 4748.......OK .OK 4950..OK .51...................OK .52........OK 53..OK .54..OK .55...............OK .OK 5657..OK 58......OK .59.OK .60....OK .61.................OK .62......OK .63.....OK .6465.............OK 66OK .67.OK .68......OK .69.OK .70...OK .OK 7172.....................OK .73...OK .74..OK .75......OK .76........OK 77..OK 78...OK 79.......OK 80......OK 81.OK .82.OK .83..................OK .84.......OK .85..OK 86.......OK .8788......OK .89.OK .9091.........OK .92.....OK 93.OK .94..OK .95..................OK 96.......OK ..97.OK .98...OK .99..OK .100......OK .101102.OK .103.........OK .104.OK .105....OK .OK 106107.................OK 108...........OK .OK 109110......OK .111..OK 112.......OK 113114.OK SUCCESS
Bisecting: 659 revisions left to test after this (roughly 9 steps)
[d8c9584ea2a92879f471fd3a2be3af6c534fb035] vfs: prefer ->dentry->d_sb to ->mnt->mnt_sb
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-12-17:15:25 d8c9584ea2a92879f471fd3a2be3af6c534fb035 compiling
2013-01-12-17:16:52 d8c9584ea2a92879f471fd3a2be3af6c534fb035 SKIP BROKEN BUILD
/usr/bin/make -C source O=/cc/wfg/linux-bisect-x86_64 ARCH=x86_64 distclean
make: Entering directory `/c/wfg/linux'
CLEAN .
CLEAN arch/x86/kernel/cpu
CLEAN arch/x86/kernel
CLEAN arch/x86/vdso
CLEAN arch/x86/lib
CLEAN firmware
CLEAN kernel
CLEAN lib
CLEAN usr
CLEAN Documentation/accounting
CLEAN Documentation/auxdisplay
CLEAN Documentation/connector
CLEAN Documentation/filesystems
CLEAN Documentation/ia64
CLEAN Documentation/laptops
CLEAN Documentation/networking/timestamping
CLEAN Documentation/networking
CLEAN Documentation/pcmcia
CLEAN Documentation/spi
CLEAN Documentation/timers
CLEAN Documentation/vm
CLEAN Documentation/watchdog/src
CLEAN arch/x86/boot/compressed
CLEAN arch/x86/boot
CLEAN .tmp_versions
CLEAN vmlinux System.map .tmp_kallsyms1.S .tmp_kallsyms1.o .tmp_kallsyms2.S .tmp_kallsyms2.o .tmp_vmlinux1 .tmp_vmlinux2 .tmp_System.map
CLEAN scripts/basic
CLEAN scripts/kconfig
CLEAN scripts/mod
CLEAN scripts
CLEAN include/config usr/include include/generated arch/x86/include/generated
CLEAN .config .config.old .version include/linux/version.h Module.symvers
make: Leaving directory `/c/wfg/linux'
Bisecting: 659 revisions left to test after this (roughly 9 steps)
[1b51197d0fd0c06877c6df1bba84ac4008a7fc60] [SCSI] lpfc 8.3.28: Add Loopback support for SLI4 adapters
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-12-17:17:08 1b51197d0fd0c06877c6df1bba84ac4008a7fc60 compiling
/home/wfg/linux

2013-01-12-17:21:32 detecting boot state 3.2.0-rc5-bisect-00087-g1b51197 #1 1..2.....3..45..6...........7.............8...........9..10......OK .11......OK .12......OK 13.....OK 14.OK .15OK 16..OK 17.......OK .18........OK .19.............OK .20.OK .21.......OK .22......OK .23.....OK 24.....OK 25.OK .OK .OK 262728........OK .29............OK .30.....OK .31.....OK .32...........OK .3334......OK .35....OK .36.OK .37.OK .3839.OK .40.....OK ..41........OK .42.............OK .43.OK .44...............OK ..45....OK 46.OK 47....OK .48..OK 49..OK .50..OK .51.OK .52........OK .53.............OK .54.....OK .55........OK .56......OK .57....OK 58.OK 59....OK .60.OK .OK 6162.....OK .63.OK .64....OK .65................OK .66.OK .67........OK .68..........OK 69OK .70....OK .71...OK .72..OK 73OK 74.....OK .75.OK .76.OK 77.............OK .78.....OK 79.........OK .80.........OK .OK .OK 81.82.........OK .83.OK .84...OK .85.OK 86..OK .87OK .88................OK .89OK .90......OK .91..............OK .92..OK .OK 9394.........OK .95..OK .9697...OK .98OK .99OK .100................OK .101OK .102........OK 103...............OK 104105...OK .106.........OK .OK 107108.....OK .109.OK 110..OK .111..............OK 112....OK SUCCESS
Bisecting: 656 revisions left to test after this (roughly 9 steps)
[2d51daaa615e4724f24e43fa01e705c40551080a] Merge tag 'spi-for-linus' of git://git.secretlab.ca/git/linux-2.6
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-12-17:36:52 2d51daaa615e4724f24e43fa01e705c40551080a compiling
/home/wfg/linux

2013-01-12-17:38:36 detecting boot state 3.2.0-bisect-03012-g2d51daa #2 1.....2....... TEST FAILURE
Bisecting: 149 revisions left to test after this (roughly 7 steps)
[edf7c8148ec40c0fd27c0ef3f688defcc65e3913] Merge branch 'x86-mce-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-12-17:39:00 edf7c8148ec40c0fd27c0ef3f688defcc65e3913 compiling
/home/wfg/linux

2013-01-12-17:40:38 detecting boot state 3.2.0-bisect-00379-gedf7c81 #3 .. TEST FAILURE
Bisecting: 64 revisions left to test after this (roughly 6 steps)
[35b740e4662ef386f0c60e1b60aaf5b44db9914c] Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-12-17:40:45 35b740e4662ef386f0c60e1b60aaf5b44db9914c compiling
/home/wfg/linux

2013-01-12-17:42:27 detecting boot state 3.2.0-bisect-00257-g35b740e #4 12 TEST FAILURE
Bisecting: 40 revisions left to test after this (roughly 6 steps)
[4a2164a7dbf0d3b6a1c2ef6f20c0d54350491a12] Merge branch 'core-memblock-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-12-17:42:34 4a2164a7dbf0d3b6a1c2ef6f20c0d54350491a12 compiling
/home/wfg/linux

2013-01-12-17:44:11 detecting boot state 3.2.0-bisect-00072-g4a2164a #5 .1.... TEST FAILURE
Bisecting: 22 revisions left to test after this (roughly 5 steps)
[9d15ffc824a90842b16592f3a960836841bd6c58] mips: Use HAVE_MEMBLOCK_NODE_MAP
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-12-17:44:23 9d15ffc824a90842b16592f3a960836841bd6c58 compiling
/home/wfg/linux

2013-01-12-17:46:15 detecting boot state 3.2.0-rc3-bisect-00072-g9d15ffc #6 1.2.........................................................OK .OK 34.OK .OK 56.OK .OK 78...OK ..OK 9OK .1011.........................................................OK .OK 1213.OK 14OK .15.OK .OK .OK 1617...OK .18OK .OK .1920.....................................................OK 21.OK .22OK 2324.OK .OK 25.26.OK .OK 2728..OK .OK ..29OK .30....................................................OK .OK 3132.OK .33OK .34.OK .35OK .36.OK 37....OK .38OK .39..................................................OK .OK 40.OK .41OK .OK 4243OK .44...OK 45..OK .46OK .47OK .48..OK .49..................................................OK .OK 50.OK .51OK .OK 5253OK 5455...OK .56..OK .OK 5758OK .OK .5960.....................................................OK .61OK .62.OK .OK 63OK 64OK 6566...OK .67.OK .68OK 6970.OK .71...................................................OK 72...OK 73OK .OK 74OK 7576OK ..77OK .78.OK .79OK .OK 8081OK ..82.................................................OK .83......OK .84OK .OK 8586OK 87OK .88OK 8990OK .91OK .92.OK .93OK .94.................................................OK .95......OK .96OK .OK 9798OK 99.OK .100OK .OK SUCCESS
Bisecting: 12 revisions left to test after this (roughly 4 steps)
[f07fdec50a13f134ea9608c8fb3f6408c58ef55e] lockdep/waitqueues: Add better annotation
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-12-18:02:18 f07fdec50a13f134ea9608c8fb3f6408c58ef55e compiling
/home/wfg/linux

2013-01-12-18:03:48 detecting boot state 3.2.0-rc6-bisect-00010-gf07fdec #7 ..1..23...4.5.................................................6.....OK .7OK 89OK .10OK .11.OK .1213OK .14OK .15OK .OK 1617...............................................OK .18...OK 19.OK .20OK 2122......OK .2324.OK .25OK .26OK .27OK .28................................................OK .29...OK 3031OK .32....OK .OK 3334.....OK .35OK .36OK 37OK .38.............................................OK .OK 3940..OK .41OK 4243.....OK 44...OK .45......OK 46.OK .47OK .OK 4849.....................................OK .50..OK .51....OK .52.OK .5354......OK .55.....OK .56.OK .57..OK 58.OK .OK .59................................OK .60...OK 61OK .62.....OK .OK 6364..OK .65......OK .66....OK .OK 6768....OK .OK 69...OK 70.............................OK 71.......OK 72.OK 73..OK .OK 7475..OK .76......OK 77....OK .78OK 79....OK .OK 8081..OK .82...........................OK .83......OK .84OK .85..OK .86..OK .87......OK .88...OK ..OK 8990...OK .91...OK ..92...............................OK 93...OK .94....OK 9596......OK .97......OK .98....OK .OK 99100...OK .101OK .102..OK .103..........................OK 104...OK .105....OK .106..OK .OK .107.OK 108..........OK .109OK .110OK SUCCESS
Bisecting: 5 revisions left to test after this (roughly 3 steps)
[15f043a65f655eb8a3aeb831a85da66de520c80f] Merge branch 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-12-18:19:49 15f043a65f655eb8a3aeb831a85da66de520c80f compiling
/home/wfg/linux

2013-01-12-18:21:43 detecting boot state 3.2.0-bisect-00017-g15f043a #8 .. TEST FAILURE
Bisecting: 2 revisions left to test after this (roughly 2 steps)
[dc4218bd0fe499fce2896f88101ea42dac1f60fc] timer: Use debugobjects to catch deletion of uninitialized timers
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-12-18:21:48 dc4218bd0fe499fce2896f88101ea42dac1f60fc compiling
/home/wfg/linux

2013-01-12-18:23:27 detecting boot state 3.2.0-rc2-bisect-00136-gdc4218b #9 1.. TEST FAILURE
Bisecting: 1 revision left to test after this (roughly 1 step)
[b84d435cc228e87951f3bbabf6cc4a5f25d5fb16] debugobjects: Extend to assert that an object is initialized
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-12-18:23:34 b84d435cc228e87951f3bbabf6cc4a5f25d5fb16 compiling
/home/wfg/linux

2013-01-12-18:24:28 detecting boot state 3.2.0-rc2-bisect-00134-gb84d435 #10 .1 TEST FAILURE
Bisecting: 0 revisions left to test after this (roughly 0 steps)
[feac18dda25134005909e7770c77464e65608bd8] debugobjects: Be smarter about static objects
running /c/kernel-tests/bisect-test-boot-failure.sh obj-bisect-x86_64

2013-01-12-18:24:33 feac18dda25134005909e7770c77464e65608bd8 compiling
/home/wfg/linux

2013-01-12-18:25:53 detecting boot state 3.2.0-rc2-bisect-00133-gfeac18d #11 ..1 TEST FAILURE
feac18dda25134005909e7770c77464e65608bd8 is the first bad commit
commit feac18dda25134005909e7770c77464e65608bd8
Author: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
Date: Mon Nov 7 19:48:26 2011 -0800

debugobjects: Be smarter about static objects

Make debugobjects use the return code from the fixup function. That
allows us better diagnostics in the activate check than relying on a
WARN_ON() in the object specific code.

[ tglx@xxxxxxxxxxxxx: Split out the debugobjects vs. the timer change ]

Signed-off-by: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
Cc: Christine Chan <cschan@xxxxxxxxxxxxxx>
Cc: John Stultz <john.stultz@xxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
Link: http://lkml.kernel.org/r/1320724108-20788-2-git-send-email-sboyd@xxxxxxxxxxxxxx
Signed-off-by: Thomas Gleixner <tglx@xxxxxxxxxxxxx>

:040000 040000 28ecd5f0279d9bb4b898fe34121ded280cf8829e 4fe33cf928f216e28be46f85b1315d9cd9ae42eb M lib
bisect run success

========= linux-next =========

2013-01-12-18:26:19 21841151fca8b548a79b1f72d978da26d5eb1169 compiling
2013-01-12-18:27:13 21841151fca8b548a79b1f72d978da26d5eb1169 SKIP BROKEN BUILD
/usr/bin/make -C source O=/cc/wfg/linux-bisect-x86_64 ARCH=x86_64 distclean
make: Entering directory `/c/wfg/linux'
CLEAN .
CLEAN arch/x86/kernel/cpu
CLEAN arch/x86/kernel
CLEAN arch/x86/realmode/rm
CLEAN arch/x86/vdso
CLEAN arch/x86/lib
CLEAN firmware
CLEAN kernel
CLEAN lib
CLEAN usr
CLEAN Documentation/accounting
CLEAN Documentation/auxdisplay
CLEAN Documentation/connector
CLEAN Documentation/filesystems
CLEAN Documentation/ia64
CLEAN Documentation/laptops
CLEAN Documentation/networking/timestamping
CLEAN Documentation/networking
CLEAN Documentation/pcmcia
CLEAN Documentation/spi
CLEAN Documentation/timers
CLEAN Documentation/watchdog/src
CLEAN arch/x86/boot/compressed
CLEAN arch/x86/boot
CLEAN arch/x86/tools
CLEAN .tmp_versions
CLEAN scripts/basic
CLEAN scripts/kconfig
CLEAN scripts/mod
CLEAN scripts
CLEAN include/config usr/include include/generated arch/x86/include/generated
CLEAN .config .config.old .version include/generated/uapi/linux/version.h Module.symvers
make: Leaving directory `/c/wfg/linux'
ERROR# 125: /c/kernel-tests/bisect:29: main: $BISECT_TEST $KBUILD_OUTPUT
#
# Automatically generated file; DO NOT EDIT.
# Linux/x86_64 3.2.0 Kernel Configuration
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_GPIO=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11"
# CONFIG_KTIME_SCALAR is not set
CONFIG_ARCH_CPU_PROBE_RELEASE=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
CONFIG_HAVE_IRQ_WORK=y
CONFIG_IRQ_WORK=y

#
# General setup
#
# CONFIG_EXPERIMENTAL is not set
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
CONFIG_KERNEL_LZO=y
CONFIG_DEFAULT_HOSTNAME="(none)"
# CONFIG_SYSVIPC is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_FHANDLE=y
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
CONFIG_HAVE_GENERIC_HARDIRQS=y

#
# IRQ subsystem
#
CONFIG_GENERIC_HARDIRQS=y
CONFIG_HAVE_SPARSE_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_PREEMPT_RCU is not set
CONFIG_RCU_TRACE=y
CONFIG_RCU_FANOUT=64
CONFIG_RCU_FANOUT_EXACT=y
CONFIG_TREE_RCU_TRACE=y
CONFIG_IKCONFIG=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_DEVICE=y
# CONFIG_CPUSETS is not set
# CONFIG_CGROUP_CPUACCT is not set
# CONFIG_RESOURCE_COUNTERS is not set
# CONFIG_CGROUP_PERF is not set
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
# CONFIG_PID_NS is not set
CONFIG_NET_NS=y
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
# CONFIG_RD_XZ is not set
# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_ANON_INODES=y
CONFIG_EXPERT=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
# CONFIG_BASE_FULL is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
# CONFIG_SHMEM is not set
CONFIG_AIO=y
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_PERF_COUNTERS is not set
CONFIG_DEBUG_PERF_USE_VMALLOC=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
CONFIG_TRACEPOINTS=y
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
CONFIG_JUMP_LABEL=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y

#
# GCOV-based kernel profiling
#
CONFIG_GCOV_KERNEL=y
# CONFIG_GCOV_PROFILE_ALL is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=1
# CONFIG_MODULES is not set
CONFIG_STOP_MACHINE=y
# CONFIG_BLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
# CONFIG_INLINE_SPIN_UNLOCK is not set
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
# CONFIG_INLINE_READ_UNLOCK is not set
# CONFIG_INLINE_READ_UNLOCK_BH is not set
# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
# CONFIG_INLINE_WRITE_UNLOCK is not set
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
# CONFIG_MUTEX_SPIN_ON_OWNER is not set
CONFIG_FREEZER=y

#
# Processor type and features
#
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_SMP=y
CONFIG_X86_MPPARSE=y
# CONFIG_X86_EXTENDED_PLATFORM is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
CONFIG_PARAVIRT_GUEST=y
# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
CONFIG_XEN=y
CONFIG_XEN_DOM0=y
CONFIG_XEN_PRIVILEGED_GUEST=y
CONFIG_XEN_PVHVM=y
CONFIG_XEN_MAX_DOMAIN_MEMORY=500
CONFIG_XEN_SAVE_RESTORE=y
CONFIG_XEN_DEBUG_FS=y
# CONFIG_KVM_CLOCK is not set
CONFIG_KVM_GUEST=y
CONFIG_PARAVIRT=y
CONFIG_PARAVIRT_CLOCK=y
# CONFIG_PARAVIRT_DEBUG is not set
CONFIG_NO_BOOTMEM=y
# CONFIG_MEMTEST is not set
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_CMPXCHG=y
CONFIG_CMPXCHG_LOCAL=y
CONFIG_CMPXCHG_DOUBLE=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_PROCESSOR_SELECT=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
# CONFIG_CPU_SUP_CENTAUR is not set
CONFIG_HPET_TIMER=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
CONFIG_NR_CPUS=8
# CONFIG_SCHED_SMT is not set
# CONFIG_SCHED_MC is not set
# CONFIG_IRQ_TIME_ACCOUNTING is not set
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_COUNT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
CONFIG_X86_MCE_THRESHOLD=y
CONFIG_X86_MCE_INJECT=y
CONFIG_X86_THERMAL_VECTOR=y
CONFIG_I8K=y
CONFIG_MICROCODE=y
# CONFIG_MICROCODE_INTEL is not set
# CONFIG_MICROCODE_AMD is not set
CONFIG_MICROCODE_OLD_INTERFACE=y
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_DIRECT_GBPAGES=y
# CONFIG_NUMA is not set
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
# CONFIG_SPARSEMEM_VMEMMAP is not set
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=999999
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_VIRT_TO_BUS=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_MEMORY_FAILURE is not set
CONFIG_TRANSPARENT_HUGEPAGE=y
# CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS is not set
CONFIG_TRANSPARENT_HUGEPAGE_MADVISE=y
CONFIG_CLEANCACHE=y
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW=64
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
# CONFIG_EFI is not set
# CONFIG_SECCOMP is not set
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
# CONFIG_SCHED_HRTICK is not set
# CONFIG_KEXEC is not set
CONFIG_CRASH_DUMP=y
CONFIG_PHYSICAL_START=0x1000000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y

#
# Power management and ACPI options
#
# CONFIG_SUSPEND is not set
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_RUNTIME is not set
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_ACPI=y
# CONFIG_ACPI_EC_DEBUGFS is not set
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_SBS is not set
# CONFIG_ACPI_HED is not set
# CONFIG_ACPI_CUSTOM_METHOD is not set
# CONFIG_ACPI_APEI is not set
# CONFIG_SFI is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_STAT is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE=y
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y

#
# x86 CPU frequency scaling drivers
#
# CONFIG_X86_PCC_CPUFREQ is not set
# CONFIG_X86_ACPI_CPUFREQ is not set
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
CONFIG_X86_P4_CLOCKMOD=y

#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=y
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_INTEL_IDLE=y

#
# Memory power savings
#

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
# CONFIG_PCI_MMCONFIG is not set
CONFIG_PCI_XEN=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_DEBUG=y
# CONFIG_PCI_STUB is not set
# CONFIG_XEN_PCIDEV_FRONTEND is not set
CONFIG_HT_IRQ=y
# CONFIG_PCI_ATS is not set
# CONFIG_PCI_IOV is not set
# CONFIG_PCI_PRI is not set
# CONFIG_PCI_PASID is not set
# CONFIG_PCI_IOAPIC is not set
CONFIG_PCI_LABEL=y
CONFIG_ISA_DMA_API=y
CONFIG_AMD_NB=y
# CONFIG_PCCARD is not set
# CONFIG_RAPIDIO is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
# CONFIG_IA32_EMULATION is not set
# CONFIG_COMPAT_FOR_U64_ALIGNMENT is not set
CONFIG_HAVE_TEXT_POKE_SMP=y
CONFIG_NET=y

#
# Networking options
#
# CONFIG_PACKET is not set
CONFIG_UNIX=y
# CONFIG_UNIX_DIAG is not set
# CONFIG_NET_KEY is not set
# CONFIG_INET is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_DNS_RESOLVER is not set
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set
# CONFIG_NETPRIO_CGROUP is not set
CONFIG_HAVE_BPF_JIT=y

#
# Network testing
#
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
# CONFIG_LIB80211 is not set

#
# CFG80211 needs to be enabled for MAC80211
#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_RFKILL_REGULATOR is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_DEBUG_DRIVER=y
CONFIG_DEBUG_DEVRES=y
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_IRQ=y
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y

#
# Protocols
#
CONFIG_PNPACPI=y
# CONFIG_SENSORS_LIS3LV02D is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_FUSION=y
CONFIG_FUSION_MAX_SGE=128
# CONFIG_FUSION_LOGGING is not set

#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=y
# CONFIG_FIREWIRE_OHCI is not set
# CONFIG_FIREWIRE_NOSY is not set
CONFIG_I2O=y
# CONFIG_I2O_LCT_NOTIFY_ON_CHANGES is not set
CONFIG_I2O_EXT_ADAPTEC=y
# CONFIG_I2O_EXT_ADAPTEC_DMA64 is not set
CONFIG_I2O_CONFIG=y
CONFIG_I2O_CONFIG_OLD_IOCTL=y
# CONFIG_I2O_BUS is not set
CONFIG_I2O_PROC=y
# CONFIG_MACINTOSH_DRIVERS is not set
# CONFIG_NETDEVICES is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
# CONFIG_INPUT_SPARSEKMAP is not set

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5520 is not set
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_GPIO_POLLED is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_TC3589X is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_GPIO is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
CONFIG_GAMEPORT=y
CONFIG_GAMEPORT_NS558=y
# CONFIG_GAMEPORT_L4 is not set
# CONFIG_GAMEPORT_EMU10K1 is not set
CONFIG_GAMEPORT_FM801=y

#
# Character devices
#
# CONFIG_VT is not set
# CONFIG_UNIX98_PTYS is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_TRACE_ROUTER is not set
CONFIG_TRACE_SINK=y
CONFIG_DEVKMEM=y

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_MAX3107 is not set
CONFIG_SERIAL_MFD_HSU=y
# CONFIG_SERIAL_MFD_HSU_CONSOLE is not set
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_TIMBERDALE=y
CONFIG_SERIAL_ALTERA_JTAGUART=y
CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE=y
# CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE_BYPASS is not set
CONFIG_SERIAL_ALTERA_UART=y
CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
CONFIG_SERIAL_ALTERA_UART_CONSOLE=y
CONFIG_SERIAL_PCH_UART=y
CONFIG_SERIAL_PCH_UART_CONSOLE=y
# CONFIG_SERIAL_XILINX_PS_UART is not set
CONFIG_TTY_PRINTK=y
CONFIG_HVC_DRIVER=y
CONFIG_HVC_IRQ=y
CONFIG_HVC_XEN=y
# CONFIG_HVC_XEN_FRONTEND is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_TIMERIOMEM=y
CONFIG_HW_RANDOM_INTEL=y
CONFIG_HW_RANDOM_AMD=y
CONFIG_HW_RANDOM_VIA=y
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
CONFIG_R3964=y
CONFIG_APPLICOM=y
# CONFIG_MWAVE is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
CONFIG_DEVPORT=y
# CONFIG_RAMOOPS is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCA=y

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
CONFIG_I2C_ALI15X3=y
CONFIG_I2C_AMD756=y
CONFIG_I2C_AMD8111=y
CONFIG_I2C_I801=y
CONFIG_I2C_ISCH=y
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_NFORCE2=y
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
CONFIG_I2C_SIS96X=y
CONFIG_I2C_VIAPRO=y

#
# ACPI drivers
#
# CONFIG_I2C_SCMI is not set

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_DESIGNWARE_PCI=y
CONFIG_I2C_GPIO=y
CONFIG_I2C_INTEL_MID=y
CONFIG_I2C_PCA_PLATFORM=y
# CONFIG_I2C_PXA_PCI is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_EG20T is not set

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT_LIGHT is not set

#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_DEBUG_CORE=y
# CONFIG_I2C_DEBUG_ALGO is not set
CONFIG_I2C_DEBUG_BUS=y
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y

#
# SPI Master Controller Drivers
#
CONFIG_SPI_ALTERA=y
CONFIG_SPI_BITBANG=y
# CONFIG_SPI_GPIO is not set
CONFIG_SPI_OC_TINY=y
# CONFIG_SPI_PXA2XX_PCI is not set
CONFIG_SPI_TOPCLIFF_PCH=y
# CONFIG_SPI_DESIGNWARE is not set

#
# SPI Protocol Masters
#

#
# PPS support
#

#
# PPS generators support
#

#
# PTP clock support
#

#
# Enable Device Drivers -> PPS to see the PTP clock options.
#
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_GENERIC=y
CONFIG_GPIO_MAX730X=y

#
# Memory mapped GPIO drivers:
#
CONFIG_GPIO_GENERIC_PLATFORM=y
CONFIG_GPIO_IT8761E=y
# CONFIG_GPIO_SCH is not set
# CONFIG_GPIO_VX855 is not set

#
# I2C GPIO expanders:
#
CONFIG_GPIO_MAX7300=y
CONFIG_GPIO_MAX732X=y
# CONFIG_GPIO_MAX732X_IRQ is not set
# CONFIG_GPIO_PCA953X is not set
CONFIG_GPIO_PCF857X=y
CONFIG_GPIO_SX150X=y
# CONFIG_GPIO_TC3589X is not set
CONFIG_GPIO_TPS65912=y
CONFIG_GPIO_WM831X=y
# CONFIG_GPIO_WM8994 is not set
CONFIG_GPIO_ADP5520=y
CONFIG_GPIO_ADP5588=y
CONFIG_GPIO_ADP5588_IRQ=y

#
# PCI GPIO expanders:
#
CONFIG_GPIO_BT8XX=y
# CONFIG_GPIO_LANGWELL is not set
CONFIG_GPIO_PCH=y
# CONFIG_GPIO_ML_IOH is not set
# CONFIG_GPIO_TIMBERDALE is not set
# CONFIG_GPIO_RDC321X is not set

#
# SPI GPIO expanders:
#
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MCP23S08 is not set
CONFIG_GPIO_MC33880=y
# CONFIG_GPIO_74X164 is not set

#
# AC97 GPIO expanders:
#

#
# MODULbus GPIO expanders:
#
CONFIG_GPIO_TPS65910=y
CONFIG_W1=y

#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_MATROX=y
CONFIG_W1_MASTER_DS1WM=y
# CONFIG_W1_MASTER_GPIO is not set

#
# 1-wire Slaves
#
# CONFIG_W1_SLAVE_THERM is not set
# CONFIG_W1_SLAVE_SMEM is not set
CONFIG_W1_SLAVE_DS2408=y
# CONFIG_W1_SLAVE_DS2423 is not set
# CONFIG_W1_SLAVE_DS2431 is not set
# CONFIG_W1_SLAVE_DS2433 is not set
# CONFIG_W1_SLAVE_DS2760 is not set
# CONFIG_W1_SLAVE_DS2780 is not set
CONFIG_W1_SLAVE_BQ27000=y
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_MAX8925_POWER is not set
# CONFIG_WM831X_BACKUP is not set
# CONFIG_WM831X_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_BQ20Z75 is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_ISP1704 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_GPIO is not set
# CONFIG_CHARGER_MAX8997 is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Native drivers
#
CONFIG_SENSORS_ADM1021=y
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
CONFIG_SENSORS_ADT7475=y
CONFIG_SENSORS_ASC7621=y
# CONFIG_SENSORS_K10TEMP is not set
# CONFIG_SENSORS_FAM15H_POWER is not set
CONFIG_SENSORS_DS620=y
# CONFIG_SENSORS_DS1621 is not set
CONFIG_SENSORS_F71805F=y
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
CONFIG_SENSORS_FSCHMD=y
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
CONFIG_SENSORS_GL520SM=y
# CONFIG_SENSORS_GPIO_FAN is not set
# CONFIG_SENSORS_IT87 is not set
CONFIG_SENSORS_JC42=y
CONFIG_SENSORS_LM63=y
# CONFIG_SENSORS_LM70 is not set
CONFIG_SENSORS_LM73=y
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
CONFIG_SENSORS_LM78=y
CONFIG_SENSORS_LM80=y
# CONFIG_SENSORS_LM83 is not set
CONFIG_SENSORS_LM85=y
CONFIG_SENSORS_LM87=y
CONFIG_SENSORS_LM90=y
CONFIG_SENSORS_LM92=y
CONFIG_SENSORS_LM93=y
# CONFIG_SENSORS_LTC4151 is not set
CONFIG_SENSORS_LM95241=y
CONFIG_SENSORS_MAX1111=y
# CONFIG_SENSORS_MAX16065 is not set
CONFIG_SENSORS_MAX1619=y
CONFIG_SENSORS_PC87360=y
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_PCF8591 is not set
CONFIG_SENSORS_SHT15=y
# CONFIG_SENSORS_SHT21 is not set
# CONFIG_SENSORS_SIS5595 is not set
CONFIG_SENSORS_EMC1403=y
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_EMC6W201 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SCH56XX_COMMON is not set
# CONFIG_SENSORS_SCH5627 is not set
# CONFIG_SENSORS_SCH5636 is not set
# CONFIG_SENSORS_ADS1015 is not set
CONFIG_SENSORS_ADS7828=y
# CONFIG_SENSORS_ADS7871 is not set
# CONFIG_SENSORS_THMC50 is not set
CONFIG_SENSORS_VIA_CPUTEMP=y
CONFIG_SENSORS_VIA686A=y
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
CONFIG_SENSORS_W83781D=y
CONFIG_SENSORS_W83791D=y
# CONFIG_SENSORS_W83792D is not set
CONFIG_SENSORS_W83627HF=y
CONFIG_SENSORS_W83627EHF=y
CONFIG_SENSORS_WM831X=y
# CONFIG_SENSORS_APPLESMC is not set
# CONFIG_SENSORS_MC13783_ADC is not set

#
# ACPI drivers
#
# CONFIG_SENSORS_ACPI_POWER is not set
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y

#
# Broadcom specific AMBA
#
# CONFIG_BCMA is not set

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
CONFIG_MFD_88PM860X=y
CONFIG_MFD_SM501=y
CONFIG_MFD_SM501_GPIO=y
# CONFIG_HTC_PASIC3 is not set
CONFIG_HTC_I2CPLD=y
CONFIG_TPS6105X=y
CONFIG_TPS65010=y
CONFIG_TPS6507X=y
CONFIG_MFD_TPS6586X=y
CONFIG_MFD_TPS65910=y
CONFIG_MFD_TPS65912=y
CONFIG_MFD_TPS65912_I2C=y
# CONFIG_MFD_TPS65912_SPI is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_STMPE is not set
CONFIG_MFD_TC3589X=y
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
CONFIG_PMIC_DA9052=y
# CONFIG_MFD_DA9052_SPI is not set
CONFIG_MFD_DA9052_I2C=y
CONFIG_PMIC_ADP5520=y
CONFIG_MFD_MAX8925=y
CONFIG_MFD_MAX8997=y
# CONFIG_MFD_MAX8998 is not set
CONFIG_MFD_WM8400=y
CONFIG_MFD_WM831X=y
CONFIG_MFD_WM831X_I2C=y
# CONFIG_MFD_WM831X_SPI is not set
# CONFIG_MFD_WM8350_I2C is not set
CONFIG_MFD_WM8994=y
# CONFIG_MFD_PCF50633 is not set
CONFIG_MFD_MC13783=y
CONFIG_MFD_MC13XXX=y
# CONFIG_ABX500_CORE is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_MFD_CS5535 is not set
CONFIG_MFD_TIMBERDALE=y
CONFIG_LPC_SCH=y
CONFIG_MFD_RDC321X=y
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_VX855 is not set
# CONFIG_MFD_WL1273_CORE is not set
CONFIG_MFD_AAT2870_CORE=y
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
CONFIG_REGULATOR_DUMMY=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
CONFIG_REGULATOR_GPIO=y
# CONFIG_REGULATOR_BQ24022 is not set
# CONFIG_REGULATOR_MAX1586 is not set
CONFIG_REGULATOR_MAX8649=y
CONFIG_REGULATOR_MAX8660=y
# CONFIG_REGULATOR_MAX8925 is not set
CONFIG_REGULATOR_MAX8952=y
CONFIG_REGULATOR_MAX8997=y
CONFIG_REGULATOR_WM831X=y
CONFIG_REGULATOR_WM8400=y
CONFIG_REGULATOR_WM8994=y
# CONFIG_REGULATOR_DA9052 is not set
CONFIG_REGULATOR_LP3971=y
# CONFIG_REGULATOR_LP3972 is not set
CONFIG_REGULATOR_MC13XXX_CORE=y
CONFIG_REGULATOR_MC13783=y
CONFIG_REGULATOR_MC13892=y
# CONFIG_REGULATOR_TPS6105X is not set
CONFIG_REGULATOR_TPS65023=y
# CONFIG_REGULATOR_TPS6507X is not set
# CONFIG_REGULATOR_TPS65912 is not set
# CONFIG_REGULATOR_88PM8607 is not set
CONFIG_REGULATOR_ISL6271A=y
CONFIG_REGULATOR_AD5398=y
# CONFIG_REGULATOR_TPS6586X is not set
# CONFIG_REGULATOR_TPS6524X is not set
# CONFIG_REGULATOR_TPS65910 is not set
# CONFIG_REGULATOR_AAT2870 is not set
# CONFIG_MEDIA_SUPPORT is not set

#
# Graphics support
#
# CONFIG_AGP is not set
# CONFIG_VGA_ARB is not set
# CONFIG_VGA_SWITCHEROO is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
CONFIG_DRM_R128=y
# CONFIG_DRM_RADEON is not set
CONFIG_DRM_MGA=y
# CONFIG_DRM_VIA is not set
CONFIG_DRM_SAVAGE=y
# CONFIG_DRM_VMWGFX is not set
# CONFIG_STUB_POULSBO is not set
CONFIG_VGASTATE=y
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DDC=y
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
# CONFIG_FB_WMT_GE_ROPS is not set
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_HECUBA=y
CONFIG_FB_SVGALIB=y
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
CONFIG_FB_CIRRUS=y
CONFIG_FB_PM2=y
# CONFIG_FB_PM2_FIFO_DISCONNECT is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
CONFIG_FB_ASILIANT=y
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_VESA=y
CONFIG_FB_N411=y
# CONFIG_FB_HGA is not set
CONFIG_FB_S1D13XXX=y
CONFIG_FB_NVIDIA=y
CONFIG_FB_NVIDIA_I2C=y
# CONFIG_FB_NVIDIA_DEBUG is not set
# CONFIG_FB_NVIDIA_BACKLIGHT is not set
CONFIG_FB_RIVA=y
CONFIG_FB_RIVA_I2C=y
CONFIG_FB_RIVA_DEBUG=y
CONFIG_FB_RIVA_BACKLIGHT=y
CONFIG_FB_LE80578=y
# CONFIG_FB_CARILLO_RANCH is not set
CONFIG_FB_MATROX=y
# CONFIG_FB_MATROX_MILLENIUM is not set
# CONFIG_FB_MATROX_MYSTIQUE is not set
CONFIG_FB_MATROX_G=y
CONFIG_FB_MATROX_I2C=y
# CONFIG_FB_MATROX_MAVEN is not set
CONFIG_FB_RADEON=y
CONFIG_FB_RADEON_I2C=y
CONFIG_FB_RADEON_BACKLIGHT=y
# CONFIG_FB_RADEON_DEBUG is not set
CONFIG_FB_ATY128=y
# CONFIG_FB_ATY128_BACKLIGHT is not set
# CONFIG_FB_ATY is not set
CONFIG_FB_S3=y
# CONFIG_FB_S3_DDC is not set
CONFIG_FB_SIS=y
# CONFIG_FB_SIS_300 is not set
# CONFIG_FB_SIS_315 is not set
CONFIG_FB_VIA=y
# CONFIG_FB_VIA_DIRECT_PROCFS is not set
# CONFIG_FB_VIA_X_COMPATIBILITY is not set
# CONFIG_FB_NEOMAGIC is not set
CONFIG_FB_KYRO=y
CONFIG_FB_3DFX=y
CONFIG_FB_VOODOO1=y
CONFIG_FB_VT8623=y
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
CONFIG_FB_CARMINE=y
CONFIG_FB_CARMINE_DRAM_EVAL=y
# CONFIG_CARMINE_DRAM_CUSTOM is not set
CONFIG_FB_TMIO=y
CONFIG_FB_TMIO_ACCELL=y
# CONFIG_FB_SM501 is not set
CONFIG_FB_VIRTUAL=y
CONFIG_XEN_FBDEV_FRONTEND=y
CONFIG_FB_METRONOME=y
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
# CONFIG_LCD_L4F00242T03 is not set
CONFIG_LCD_LMS283GF05=y
# CONFIG_LCD_LTV350QV is not set
CONFIG_LCD_ILI9320=y
# CONFIG_LCD_TDO24M is not set
CONFIG_LCD_VGG2432A4=y
CONFIG_LCD_PLATFORM=y
# CONFIG_LCD_S6E63M0 is not set
CONFIG_LCD_LD9040=y
# CONFIG_LCD_AMS369FG06 is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
# CONFIG_BACKLIGHT_PROGEAR is not set
# CONFIG_BACKLIGHT_CARILLO_RANCH is not set
CONFIG_BACKLIGHT_MAX8925=y
# CONFIG_BACKLIGHT_APPLE is not set
# CONFIG_BACKLIGHT_SAHARA is not set
# CONFIG_BACKLIGHT_WM831X is not set
CONFIG_BACKLIGHT_ADP5520=y
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_88PM860X is not set
CONFIG_BACKLIGHT_AAT2870=y

#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
# CONFIG_LOGO is not set
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HID_BATTERY_STRENGTH=y
# CONFIG_HIDRAW is not set
# CONFIG_HID_PID is not set

#
# Special HID drivers
#
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB_ARCH_HAS_XHCI=y
# CONFIG_USB is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_DEBUG=y
CONFIG_USB_GADGET_DEBUG_FS=y
CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2
# CONFIG_USB_R8A66597 is not set
# CONFIG_USB_MV_UDC is not set
# CONFIG_USB_M66592 is not set
# CONFIG_USB_AMD5536UDC is not set
# CONFIG_USB_CI13XXX_PCI is not set
# CONFIG_USB_NET2272 is not set
# CONFIG_USB_NET2280 is not set
# CONFIG_USB_GOKU is not set
CONFIG_USB_EG20T=y
CONFIG_USB_GADGET_DUALSPEED=y
CONFIG_USB_ZERO=y
# CONFIG_USB_ETH is not set
# CONFIG_USB_G_NCM is not set
# CONFIG_USB_G_SERIAL is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_CDC_COMPOSITE is not set
# CONFIG_USB_G_HID is not set
# CONFIG_USB_G_DBGP is not set

#
# OTG and related infrastructure
#
CONFIG_USB_OTG_UTILS=y
CONFIG_USB_GPIO_VBUS=y
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_MMC is not set
CONFIG_MEMSTICK=y
CONFIG_MEMSTICK_DEBUG=y

#
# MemoryStick drivers
#
CONFIG_MEMSTICK_UNSAFE_RESUME=y

#
# MemoryStick Host Controller Drivers
#
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y

#
# LED drivers
#
# CONFIG_LEDS_88PM860X is not set
# CONFIG_LEDS_LM3530 is not set
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_LP3944=y
CONFIG_LEDS_LP5521=y
# CONFIG_LEDS_LP5523 is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
# CONFIG_LEDS_PCA955X is not set
CONFIG_LEDS_WM831X_STATUS=y
# CONFIG_LEDS_DAC124S085 is not set
CONFIG_LEDS_REGULATOR=y
CONFIG_LEDS_BD2802=y
# CONFIG_LEDS_INTEL_SS4200 is not set
# CONFIG_LEDS_LT3593 is not set
CONFIG_LEDS_ADP5520=y
CONFIG_LEDS_MC13783=y
CONFIG_LEDS_TCA6507=y
# CONFIG_LEDS_TRIGGERS is not set

#
# LED Triggers
#
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC=y

#
# Reporting subsystems
#
CONFIG_EDAC_DEBUG=y
# CONFIG_EDAC_DECODE_MCE is not set
CONFIG_EDAC_MM_EDAC=y
# CONFIG_EDAC_E752X is not set
# CONFIG_EDAC_I82975X is not set
CONFIG_EDAC_I3000=y
# CONFIG_EDAC_X38 is not set
# CONFIG_EDAC_I5400 is not set
# CONFIG_EDAC_I7CORE is not set
# CONFIG_EDAC_I5000 is not set
CONFIG_EDAC_I5100=y
# CONFIG_EDAC_I7300 is not set
# CONFIG_RTC_CLASS is not set
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set

#
# DMA Devices
#
# CONFIG_INTEL_MID_DMAC is not set
CONFIG_INTEL_IOATDMA=y
CONFIG_TIMB_DMA=y
CONFIG_PCH_DMA=y
CONFIG_DMA_ENGINE=y

#
# DMA Clients
#
CONFIG_NET_DMA=y
CONFIG_ASYNC_TX_DMA=y
# CONFIG_DMATEST is not set
CONFIG_DCA=y
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set

#
# Virtio drivers
#
# CONFIG_VIRTIO_BALLOON is not set

#
# Microsoft Hyper-V guest support
#
# CONFIG_HYPERV is not set

#
# Xen driver support
#
# CONFIG_XEN_BALLOON is not set
# CONFIG_XEN_DEV_EVTCHN is not set
CONFIG_XEN_BACKEND=y
# CONFIG_XENFS is not set
CONFIG_XEN_XENBUS_FRONTEND=y
# CONFIG_XEN_GNTDEV is not set
# CONFIG_XEN_GRANT_DEV_ALLOC is not set
CONFIG_SWIOTLB_XEN=y
CONFIG_XEN_TMEM=y
CONFIG_XEN_PCIDEV_BACKEND=y
CONFIG_XEN_PRIVCMD=y
CONFIG_XEN_ACPI_PROCESSOR=y
CONFIG_STAGING=y
# CONFIG_SLICOSS is not set
# CONFIG_ECHO is not set
# CONFIG_POHMELFS is not set
# CONFIG_DRM_NOUVEAU is not set
# CONFIG_VME_BUS is not set
CONFIG_DX_SEP=y
# CONFIG_IIO is not set
# CONFIG_XVMALLOC is not set
# CONFIG_ZCACHE is not set
CONFIG_FB_SM7XX=y
CONFIG_CRYSTALHD=y
# CONFIG_FB_XGI is not set
# CONFIG_ACPI_QUICKSTART is not set
CONFIG_FT1000=y

#
# Speakup console speech
#
# CONFIG_TOUCHSCREEN_CLEARPAD_TM1217 is not set
# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 is not set
# CONFIG_STAGING_MEDIA is not set

#
# Android
#
CONFIG_ANDROID=y
CONFIG_ANDROID_BINDER_IPC=y
# CONFIG_ANDROID_LOGGER is not set
# CONFIG_ANDROID_RAM_CONSOLE is not set
# CONFIG_ANDROID_TIMED_OUTPUT is not set
CONFIG_ANDROID_LOW_MEMORY_KILLER=y
# CONFIG_ANDROID_SWITCH is not set
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ACERHDF is not set
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_HP_ACCEL is not set
# CONFIG_PANASONIC_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_INTEL_MENLOW is not set
# CONFIG_ACPI_WMI is not set
# CONFIG_ACPI_ASUS is not set
# CONFIG_TOPSTAR_LAPTOP is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_TOSHIBA_BT_RFKILL is not set
# CONFIG_ACPI_CMPC is not set
# CONFIG_INTEL_IPS is not set
CONFIG_IBM_RTL=y
# CONFIG_XO15_EBOOK is not set
# CONFIG_SAMSUNG_Q10 is not set

#
# Hardware Spinlock drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
# CONFIG_IOMMU_SUPPORT is not set
CONFIG_VIRT_DRIVERS=y
CONFIG_PM_DEVFREQ=y

#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
CONFIG_DEVFREQ_GOV_PERFORMANCE=y
# CONFIG_DEVFREQ_GOV_POWERSAVE is not set
# CONFIG_DEVFREQ_GOV_USERSPACE is not set

#
# DEVFREQ Drivers
#

#
# Firmware Drivers
#
CONFIG_EDD=y
CONFIG_EDD_OFF=y
# CONFIG_FIRMWARE_MEMMAP is not set
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
CONFIG_ISCSI_IBFT_FIND=y
# CONFIG_SIGMA is not set
# CONFIG_GOOGLE_FIRMWARE is not set

#
# File systems
#
# CONFIG_FS_POSIX_ACL is not set
CONFIG_EXPORTFS=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY_USER=y
# CONFIG_FANOTIFY is not set
CONFIG_QUOTA=y
# CONFIG_QUOTA_NETLINK_INTERFACE is not set
# CONFIG_PRINT_QUOTA_WARNING is not set
CONFIG_QUOTA_DEBUG=y
CONFIG_QFMT_V1=y
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set

#
# Caches
#
# CONFIG_FSCACHE is not set

#
# Pseudo filesystems
#
# CONFIG_PROC_FS is not set
# CONFIG_SYSFS is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
CONFIG_MISC_FILESYSTEMS=y
CONFIG_PSTORE=y
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
CONFIG_NLS_CODEPAGE_775=y
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_CODEPAGE_852=y
# CONFIG_NLS_CODEPAGE_855 is not set
CONFIG_NLS_CODEPAGE_857=y
# CONFIG_NLS_CODEPAGE_860 is not set
CONFIG_NLS_CODEPAGE_861=y
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
CONFIG_NLS_CODEPAGE_864=y
# CONFIG_NLS_CODEPAGE_865 is not set
CONFIG_NLS_CODEPAGE_866=y
CONFIG_NLS_CODEPAGE_869=y
# CONFIG_NLS_CODEPAGE_936 is not set
CONFIG_NLS_CODEPAGE_950=y
CONFIG_NLS_CODEPAGE_932=y
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
CONFIG_NLS_ISO8859_8=y
CONFIG_NLS_CODEPAGE_1250=y
CONFIG_NLS_CODEPAGE_1251=y
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
CONFIG_NLS_ISO8859_4=y
CONFIG_NLS_ISO8859_5=y
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
CONFIG_NLS_ISO8859_13=y
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_LOCKUP_DETECTOR is not set
# CONFIG_HARDLOCKUP_DETECTOR is not set
# CONFIG_DETECT_HUNG_TASK is not set
CONFIG_DEBUG_OBJECTS=y
CONFIG_DEBUG_OBJECTS_SELFTEST=y
# CONFIG_DEBUG_OBJECTS_FREE is not set
CONFIG_DEBUG_OBJECTS_TIMERS=y
CONFIG_DEBUG_OBJECTS_WORK=y
CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER=y
CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_LOCK_ALLOC=y
# CONFIG_PROVE_LOCKING is not set
# CONFIG_SPARSE_RCU_POINTER is not set
CONFIG_LOCKDEP=y
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_LOCKDEP is not set
CONFIG_DEBUG_ATOMIC_SLEEP=y
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
CONFIG_STACKTRACE=y
CONFIG_DEBUG_STACK_USAGE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
CONFIG_DEBUG_VIRTUAL=y
CONFIG_DEBUG_WRITECOUNT=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_TEST_LIST_SORT is not set
CONFIG_DEBUG_SG=y
CONFIG_DEBUG_NOTIFIERS=y
CONFIG_DEBUG_CREDENTIALS=y
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
CONFIG_RCU_TORTURE_TEST=y
# CONFIG_RCU_TORTURE_TEST_RUNNABLE is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=21
# CONFIG_BACKTRACE_SELF_TEST is not set
CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_CPU_NOTIFIER_ERROR_INJECT is not set
CONFIG_FAULT_INJECTION=y
CONFIG_FAILSLAB=y
CONFIG_FAIL_PAGE_ALLOC=y
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FTRACE_NMI_ENTER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_RING_BUFFER=y
CONFIG_FTRACE_NMI_ENTER=y
CONFIG_EVENT_TRACING=y
# CONFIG_EVENT_POWER_TRACING_DEPRECATED is not set
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_FTRACE_SYSCALLS is not set
CONFIG_TRACE_BRANCH_PROFILING=y
# CONFIG_BRANCH_PROFILE_NONE is not set
CONFIG_PROFILE_ANNOTATED_BRANCHES=y
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_BRANCH_TRACER is not set
CONFIG_STACK_TRACER=y
CONFIG_DYNAMIC_FTRACE=y
CONFIG_FUNCTION_PROFILER=y
CONFIG_FTRACE_MCOUNT_RECORD=y
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_MMIOTRACE is not set
CONFIG_RING_BUFFER_BENCHMARK=y
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
CONFIG_BUILD_DOCSRC=y
# CONFIG_DYNAMIC_DEBUG is not set
CONFIG_DMA_API_DEBUG=y
CONFIG_ATOMIC64_SELFTEST=y
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_HAVE_ARCH_KMEMCHECK=y
CONFIG_TEST_KSTRTOX=y
# CONFIG_STRICT_DEVMEM is not set
CONFIG_X86_VERBOSE_BOOTUP=y
# CONFIG_EARLY_PRINTK is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
CONFIG_DEBUG_RODATA_TEST=y
# CONFIG_IOMMU_DEBUG is not set
CONFIG_IOMMU_STRESS=y
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
# CONFIG_IO_DELAY_0X80 is not set
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
CONFIG_IO_DELAY_NONE=y
CONFIG_DEFAULT_IO_DELAY_TYPE=3
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
CONFIG_OPTIMIZE_INLINING=y

#
# Security options
#
CONFIG_KEYS=y
# CONFIG_ENCRYPTED_KEYS is not set
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY_DMESG_RESTRICT=y
# CONFIG_SECURITYFS is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA=y
CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA=y
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_AUTHENC=y

#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_SEQIV=y

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
# CONFIG_CRYPTO_ECB is not set
CONFIG_CRYPTO_LRW=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_XTS=y

#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_INTEL=y
CONFIG_CRYPTO_GHASH=y
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
CONFIG_CRYPTO_RMD160=y
CONFIG_CRYPTO_RMD256=y
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA1_SSSE3 is not set
CONFIG_CRYPTO_SHA256=y
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_WP512=y
# CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL is not set

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_X86_64=y
# CONFIG_CRYPTO_AES_NI_INTEL is not set
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_BLOWFISH_COMMON=y
CONFIG_CRYPTO_BLOWFISH_X86_64=y
CONFIG_CRYPTO_CAMELLIA=y
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST6=y
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_KHAZAD=y
CONFIG_CRYPTO_SEED=y
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_SERPENT_SSE2_X86_64=y
CONFIG_CRYPTO_TEA=y
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y
CONFIG_CRYPTO_TWOFISH_X86_64=y
CONFIG_CRYPTO_TWOFISH_X86_64_3WAY=y

#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set

#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_USER_API_HASH is not set
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=y
# CONFIG_CRYPTO_DEV_PADLOCK_AES is not set
CONFIG_CRYPTO_DEV_PADLOCK_SHA=y
CONFIG_HAVE_KVM=y
# CONFIG_VIRTUALIZATION is not set
CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
CONFIG_CRC7=y
CONFIG_LIBCRC32C=y
# CONFIG_CRC8 is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
# CONFIG_XZ_DEC is not set
# CONFIG_XZ_DEC_BCJ is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_NLATTR=y
# CONFIG_AVERAGE is not set
# CONFIG_CORDIC is not set
CONFIG_MPILIB=y
# CONFIG_MPILIB_EXTRA is not set
# CONFIG_DIGSIG is not set
# CONFIG_IIO_SIMPLE_DUMMY is not set
# CONFIG_ATA_SFF is not set
# CONFIG_DRM_TTM is not set
# CONFIG_ISDN_DRV_LOOP is not set

Next message: u3557: "Re: PTRACE_SYSCALL && vsyscall (Was: arch_check_bp_in_kernelspace:fix the range check)"
Previous message: Fangxiaozhi (Franko): "RE: [PATCH 2/2]linux-usb:optimize to match the Huawei USB storagedevices and support new switch command"
Next in thread: Thomas Gleixner: "Re: WARNING: at x86/lib/debugobjects.c:908check_results.constprop.9+0x129/0x153()"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]