Re: [PATCH 07/14] usb: ehci-omap: Instantiate PHY devices if required

[Alan Stern]

On Thu, 10 Jan 2013, Roger Quadros wrote:

> If the OMAP's Host controller is in PHY mode then we instantiate
> a platform device for the PHY (one for each port in PHY mode) and
> hold a reference to it so that we can use the usb_phy API, e.g.
> while suspend/resume.
> 
> The platform data for the PHY must be supplied in the newly added
> .phy_config parameter in struct usbhs_omap_platform_data.
> 
> The end goal is to move the PHY's reset and power handling code
> out of the ehci-omap driver and into the phy driver.

As mentioned in another thread, I would prefer to have these changes to 
ehci-omap.c made after the driver is converted to the new "ehci-hcd is 
a library" scheme.  The patch below does the conversion; it is meant to 
apply on top of the similar patch for ehci-mxc posted recently on the 
linux-usb mailing list.

After this conversion, the omap_ehci_hcd private data structure doesn't 
have to be allocated specifically.  It can be handled in the same way 
as the private data structure in the ehci-mxc patch.

I haven't even tried to compile this.  Please let me know how it works.

Alan Stern



Index: usb-3.7/drivers/usb/host/Kconfig
===================================================================
--- usb-3.7.orig/drivers/usb/host/Kconfig
+++ usb-3.7/drivers/usb/host/Kconfig
@@ -155,7 +155,7 @@ config USB_EHCI_MXC
 	  Variation of ARC USB block used in some Freescale chips.
 
 config USB_EHCI_HCD_OMAP
-	bool "EHCI support for OMAP3 and later chips"
+	tristate "EHCI support for OMAP3 and later chips"
 	depends on USB_EHCI_HCD && ARCH_OMAP
 	default y
 	---help---
Index: usb-3.7/drivers/usb/host/Makefile
===================================================================
--- usb-3.7.orig/drivers/usb/host/Makefile
+++ usb-3.7/drivers/usb/host/Makefile
@@ -27,6 +27,7 @@ obj-$(CONFIG_USB_EHCI_HCD)	+= ehci-hcd.o
 obj-$(CONFIG_USB_EHCI_PCI)	+= ehci-pci.o
 obj-$(CONFIG_USB_EHCI_HCD_PLATFORM)	+= ehci-platform.o
 obj-$(CONFIG_USB_EHCI_MXC)	+= ehci-mxc.o
+obj-$(CONFIG_USB_EHCI_HCD_OMAP)	+= ehci-omap.o
 
 obj-$(CONFIG_USB_OXU210HP_HCD)	+= oxu210hp-hcd.o
 obj-$(CONFIG_USB_ISP116X_HCD)	+= isp116x-hcd.o
Index: usb-3.7/drivers/usb/host/ehci-hcd.c
===================================================================
--- usb-3.7.orig/drivers/usb/host/ehci-hcd.c
+++ usb-3.7/drivers/usb/host/ehci-hcd.c
@@ -1255,11 +1255,6 @@ MODULE_LICENSE ("GPL");
 #define PLATFORM_DRIVER		ehci_hcd_sh_driver
 #endif
 
-#ifdef CONFIG_USB_EHCI_HCD_OMAP
-#include "ehci-omap.c"
-#define        PLATFORM_DRIVER         ehci_hcd_omap_driver
-#endif
-
 #ifdef CONFIG_PPC_PS3
 #include "ehci-ps3.c"
 #define	PS3_SYSTEM_BUS_DRIVER	ps3_ehci_driver
@@ -1349,6 +1344,7 @@ MODULE_LICENSE ("GPL");
 	!IS_ENABLED(CONFIG_USB_EHCI_HCD_PLATFORM) && \
 	!defined(CONFIG_USB_CHIPIDEA_HOST) && \
 	!defined(CONFIG_USB_EHCI_MXC) && \
+	!defined(CONFIG_USB_EHCI_HCD_OMAP) && \
 	!defined(PLATFORM_DRIVER) && \
 	!defined(PS3_SYSTEM_BUS_DRIVER) && \
 	!defined(OF_PLATFORM_DRIVER) && \
Index: usb-3.7/drivers/usb/host/ehci-omap.c
===================================================================
--- usb-3.7.orig/drivers/usb/host/ehci-omap.c
+++ usb-3.7/drivers/usb/host/ehci-omap.c
@@ -36,6 +36,9 @@
  *	- convert to use hwmod and runtime PM
  */
 
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/io.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/usb/ulpi.h>
@@ -44,6 +47,10 @@
 #include <linux/pm_runtime.h>
 #include <linux/gpio.h>
 #include <linux/clk.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+
+#include "ehci.h"
 
 /* EHCI Register Set */
 #define EHCI_INSNREG04					(0xA0)
@@ -56,11 +63,13 @@
 #define	EHCI_INSNREG05_ULPI_EXTREGADD_SHIFT		8
 #define	EHCI_INSNREG05_ULPI_WRDATA_SHIFT		0
 
-/*-------------------------------------------------------------------------*/
+#define DRIVER_DESC = "OMAP-EHCI Host Controller driver";
 
-static const struct hc_driver ehci_omap_hc_driver;
+static const char hcd_name[] = "ehci-omap";
 
 
+/*-------------------------------------------------------------------------*/
+
 static inline void ehci_write(void __iomem *base, u32 reg, u32 val)
 {
 	__raw_writel(val, base + reg);
@@ -165,6 +174,12 @@ static void disable_put_regulator(
 /* configure so an HC device and id are always provided */
 /* always called with process context; sleeping is OK */
 
+static struct hc_driver __read_mostly ehci_omap_hc_driver;
+
+static const struct ehci_driver_overrides ehci_omap_overrides __initdata = {
+	.reset =	omap_ehci_init,
+};
+
 /**
  * ehci_hcd_omap_probe - initialize TI-based HCDs
  *
@@ -322,56 +337,33 @@ static struct platform_driver ehci_hcd_o
 	/*.suspend		= ehci_hcd_omap_suspend, */
 	/*.resume		= ehci_hcd_omap_resume, */
 	.driver = {
-		.name		= "ehci-omap",
+		.name		= hcd_name,
 	}
 };
 
 /*-------------------------------------------------------------------------*/
 
-static const struct hc_driver ehci_omap_hc_driver = {
-	.description		= hcd_name,
-	.product_desc		= "OMAP-EHCI Host Controller",
-	.hcd_priv_size		= sizeof(struct ehci_hcd),
-
-	/*
-	 * generic hardware linkage
-	 */
-	.irq			= ehci_irq,
-	.flags			= HCD_MEMORY | HCD_USB2,
-
-	/*
-	 * basic lifecycle operations
-	 */
-	.reset			= omap_ehci_init,
-	.start			= ehci_run,
-	.stop			= ehci_stop,
-	.shutdown		= ehci_shutdown,
-
-	/*
-	 * managing i/o requests and associated device resources
-	 */
-	.urb_enqueue		= ehci_urb_enqueue,
-	.urb_dequeue		= ehci_urb_dequeue,
-	.endpoint_disable	= ehci_endpoint_disable,
-	.endpoint_reset		= ehci_endpoint_reset,
+static int __init ehci_omap_init(void)
+{
+	if (usb_disabled())
+		return -ENODEV;
 
-	/*
-	 * scheduling support
-	 */
-	.get_frame_number	= ehci_get_frame,
+	pr_info("%s: " DRIVER_DESC "\n", hcd_name);
 
-	/*
-	 * root hub support
-	 */
-	.hub_status_data	= ehci_hub_status_data,
-	.hub_control		= ehci_hub_control,
-	.bus_suspend		= ehci_bus_suspend,
-	.bus_resume		= ehci_bus_resume,
+	ehci_init_driver(&ehci_omap_hc_driver, &ehci_omap_overrides);
+	return platform_driver_register(&ehci_omap_driver);
+}
+module_init(ehci_omap_init);
 
-	.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
-};
+static void __exit ehci_omap_cleanup(void)
+{
+	platform_driver_unregister(&ehci_omap_driver);
+}
+module_exit(ehci_omap_cleanup);
 
 MODULE_ALIAS("platform:omap-ehci");
 MODULE_AUTHOR("Texas Instruments, Inc.");
 MODULE_AUTHOR("Felipe Balbi <felipe.balbi@xxxxxxxxx>");
 
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/