[PATCH] input: vt8500: Add power button keypad driver

[Tony Prisk]

This patch adds support for the Power Button keypad found on
Wondermedia netbooks/tablets.

A keymap property is exposed to allowing defining the key
event to be generated when the power button is pressed.

Signed-off-by: Tony Prisk <linux@xxxxxxxxxxxxxxx>
---
 .../bindings/input/vt8500-power-keypad.txt         |   17 ++
 drivers/input/keyboard/Kconfig                     |   10 ++
 drivers/input/keyboard/Makefile                    |    1 +
 drivers/input/keyboard/wmt_power_keypad.c          |  174 ++++++++++++++++++++
 4 files changed, 202 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/input/vt8500-power-keypad.txt
 create mode 100644 drivers/input/keyboard/wmt_power_keypad.c

diff --git a/Documentation/devicetree/bindings/input/vt8500-power-keypad.txt b/Documentation/devicetree/bindings/input/vt8500-power-keypad.txt
new file mode 100644
index 0000000..bae6228
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/vt8500-power-keypad.txt
@@ -0,0 +1,17 @@
+* Wondermedia Power Keypad device tree bindings
+
+Wondermedia SoCs have a single irq-driven power button attached to
+the power management controller.
+
+Required SoC Specific Properties:
+- compatible: should be one of the following
+   - "wm,power-keypad": For all Wondermedia 8xxx-series SoCs.
+- interrupts: should be the power management controller wakeup interrupt.
+- keymap: linux keycode to generate when power button pressed.
+
+Example:
+	powerkey: pwrkey@0 {
+		compatible = "wm,power-keypad";
+		interrupts = <22>;
+		keymap = <116>; /* KEY_POWER */
+	};
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index 5a240c6..c270f27 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -595,6 +595,16 @@ config KEYBOARD_TWL4030
 	  To compile this driver as a module, choose M here: the
 	  module will be called twl4030_keypad.
 
+config KEYBOARD_WMT_POWER_KEYPAD
+	tristate "Wondermedia Power keypad support"
+	depends on ARCH_VT8500
+	help
+	  Say Y here to enable support for the power button keypad
+	  on Wondermedia 8xxx-series SoCs.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called wmt_power_keypad.
+
 config KEYBOARD_XTKBD
 	tristate "XT keyboard"
 	select SERIO
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
index 44e7600..eea31af 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@@ -52,5 +52,6 @@ obj-$(CONFIG_KEYBOARD_TC3589X)		+= tc3589x-keypad.o
 obj-$(CONFIG_KEYBOARD_TEGRA)		+= tegra-kbc.o
 obj-$(CONFIG_KEYBOARD_TNETV107X)	+= tnetv107x-keypad.o
 obj-$(CONFIG_KEYBOARD_TWL4030)		+= twl4030_keypad.o
+obj-$(CONFIG_KEYBOARD_WMT_POWER_KEYPAD)	+= wmt_power_keypad.o
 obj-$(CONFIG_KEYBOARD_XTKBD)		+= xtkbd.o
 obj-$(CONFIG_KEYBOARD_W90P910)		+= w90p910_keypad.o
diff --git a/drivers/input/keyboard/wmt_power_keypad.c b/drivers/input/keyboard/wmt_power_keypad.c
new file mode 100644
index 0000000..ce8aa9a
--- /dev/null
+++ b/drivers/input/keyboard/wmt_power_keypad.c
@@ -0,0 +1,174 @@
+/* Wondermedia Power Keypad
+ *
+ * Copyright (C) 2012 Tony Prisk <linux@xxxxxxxxxxxxxxx>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/bitops.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_device.h>
+
+static void __iomem *pmc_base;
+static struct input_dev *kpad_power;
+static spinlock_t kpad_power_lock;
+static int power_button_pressed;
+static struct timer_list kpad_power_timer;
+static unsigned int kpad_power_code;
+
+static inline void kpad_power_timeout(unsigned long fcontext)
+{
+	u32 status;
+	unsigned long flags;
+
+	spin_lock_irqsave(&kpad_power_lock, flags);
+
+	status = readl(pmc_base + 0x14);
+
+	if (power_button_pressed) {
+		input_report_key(kpad_power, kpad_power_code, 0);
+		input_sync(kpad_power);
+		power_button_pressed = 0;
+	}
+
+	spin_unlock_irqrestore(&kpad_power_lock, flags);
+}
+
+static irqreturn_t kpad_power_isr(int irq_num, void *data)
+{
+	u32 status;
+	unsigned long flags;
+
+	spin_lock_irqsave(&kpad_power_lock, flags);
+
+	status = readl(pmc_base + 0x14);
+	udelay(100);
+	writel(status, pmc_base + 0x14);
+
+	if (status & BIT(14)) {
+		if (!power_button_pressed) {
+			input_report_key(kpad_power, kpad_power_code, 1);
+			input_sync(kpad_power);
+
+			power_button_pressed = 1;
+
+			mod_timer(&kpad_power_timer,
+				  jiffies + msecs_to_jiffies(500));
+		}
+	}
+
+	spin_unlock_irqrestore(&kpad_power_lock, flags);
+
+	return IRQ_HANDLED;
+}
+
+static int vt8500_pwr_kpad_probe(struct platform_device *pdev)
+{
+	struct device_node *np;
+	u32 status;
+	int err;
+	int irq;
+
+	np = of_find_compatible_node(NULL, NULL, "via,vt8500-pmc");
+	if (!np) {
+		dev_err(&pdev->dev, "pmc node not found\n");
+		return -EINVAL;
+	}
+
+	pmc_base = of_iomap(np, 0);
+	if (!pmc_base) {
+		dev_err(&pdev->dev, "unable to map pmc memory\n");
+		return -ENOMEM;
+	}
+
+	np = pdev->dev.of_node;
+	if (!np) {
+		dev_err(&pdev->dev, "devicenode not found\n");
+		return -ENODEV;
+	}
+
+	err = of_property_read_u32(np, "keymap", &kpad_power_code);
+	if (err) {
+		dev_warn(&pdev->dev, "defaulting to KEY_POWER\n");
+		kpad_power_code = KEY_POWER;
+	}
+
+	/* set power button to soft-power */
+	status = readl(pmc_base + 0x54);
+	writel(status | 1, pmc_base + 0x54);
+
+	/* clear any pending interrupts */
+	status = readl(pmc_base + 0x14);
+	writel(status, pmc_base + 0x14);
+
+	kpad_power = input_allocate_device();
+	if (!kpad_power) {
+		dev_err(&pdev->dev, "failed to allocate input device\n");
+		return -ENOMEM;
+	}
+
+	spin_lock_init(&kpad_power_lock);
+	setup_timer(&kpad_power_timer, kpad_power_timeout,
+				       (unsigned long)kpad_power);
+
+	irq = irq_of_parse_and_map(np, 0);
+	err = request_irq(irq, &kpad_power_isr, 0, "pwrbtn", NULL);
+	if (err < 0) {
+		dev_err(&pdev->dev, "failed to request irq\n");
+		return err;
+	}
+
+	kpad_power->evbit[0] = BIT_MASK(EV_KEY);
+	set_bit(kpad_power_code, kpad_power->keybit);
+
+	kpad_power->name = "wmt_power_keypad";
+	kpad_power->phys = "wmt_power_keypad";
+	kpad_power->keycode = &kpad_power_code;
+	kpad_power->keycodesize = sizeof(unsigned int);
+	kpad_power->keycodemax = 1;
+
+	err = input_register_device(kpad_power);
+	if (err < 0) {
+		dev_err(&pdev->dev, "failed to register input device\n");
+		return err;
+	}
+
+	return 0;
+}
+
+static struct of_device_id vt8500_pwr_kpad_dt_ids[] = {
+	{ .compatible = "wm,power-keypad" },
+	{ /* Sentinel */ },
+};
+
+static struct platform_driver vt8500_pwr_kpad_driver = {
+	.probe		= vt8500_pwr_kpad_probe,
+	.driver		= {
+		.name	= "wmt-power-keypad",
+		.owner	= THIS_MODULE,
+		.of_match_table = vt8500_pwr_kpad_dt_ids,
+	},
+};
+
+module_platform_driver(vt8500_pwr_kpad_driver);
+
+MODULE_DESCRIPTION("Wondermedia Power Keypad Driver");
+MODULE_AUTHOR("Tony Prisk <linux@xxxxxxxxxxxxxxx>");
+MODULE_LICENSE("GPL v2");
+MODULE_DEVICE_TABLE(of, vt8500_pwr_kpad_dt_ids);
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/