[PATCH] Replace incomming with incoming in all comments and strings

From: Jorrit Schippers
Date: Thu Dec 27 2012 - 11:38:18 EST

Next message: anish kumar: "Re: What does ISA/PCI really mean to ARM architecture?"
Previous message: Thadeu Lima de Souza Cascardo: "[PATCH] ppc/EEH: fix crash when adding a device in a slot with DDW"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Signed-off-by: Jorrit Schippers <jorrit@xxxxxxxx>
---
Documentation/networking/ip-sysctl.txt | 2 +-
.../cavium-octeon/executive/cvmx-helper-util.c | 4 ++--
arch/mips/include/asm/octeon/cvmx-helper-util.h | 4 ++--
arch/x86/kernel/cpu/perf_event_amd_ibs.c | 2 +-
drivers/hid/Kconfig | 2 +-
drivers/isdn/hardware/eicon/divacapi.h | 6 +++---
drivers/isdn/hardware/eicon/pc.h | 4 ++--
drivers/isdn/mISDN/l1oip_core.c | 2 +-
drivers/media/platform/soc_camera/mx2_camera.c | 2 +-
drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 2 +-
drivers/net/ethernet/mellanox/mlx4/en_main.c | 2 +-
drivers/net/irda/ali-ircc.c | 2 +-
drivers/staging/android/binder.h | 2 +-
drivers/staging/octeon/ethernet.c | 2 +-
drivers/tty/ipwireless/hardware.c | 4 ++--
include/net/irda/irlmp.h | 2 +-
include/net/irda/irttp.h | 2 +-
net/bluetooth/hci_core.c | 2 +-
net/irda/timer.c | 2 +-
net/sctp/sm_make_chunk.c | 2 +-
20 files changed, 26 insertions(+), 26 deletions(-)

diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
index dd52d51..b3d239e 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -215,7 +215,7 @@ tcp_ecn - INTEGER
Possible values are:
0 Disable ECN. Neither initiate nor accept ECN.
1 Always request ECN on outgoing connection attempts.
- 2 Enable ECN when requested by incomming connections
+ 2 Enable ECN when requested by incoming connections
but do not request ECN on outgoing connections.
Default: 2

diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-util.c b/arch/mips/cavium-octeon/executive/cvmx-helper-util.c
index 116dea1..dfdfe8b 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-helper-util.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-helper-util.c
@@ -175,7 +175,7 @@ int cvmx_helper_dump_packet(cvmx_wqe_t *work)
* Packets will begin slowly dropping when there are less than
* this many packet buffers free in FPA 0.
* @drop_thresh:
- * All incomming packets will be dropped when there are less
+ * All incoming packets will be dropped when there are less
* than this many free packet buffers in FPA 0.
* Returns Zero on success. Negative on failure
*/
@@ -210,7 +210,7 @@ int cvmx_helper_setup_red_queue(int queue, int pass_thresh, int drop_thresh)
* Packets will begin slowly dropping when there are less than
* this many packet buffers free in FPA 0.
* @drop_thresh:
- * All incomming packets will be dropped when there are less
+ * All incoming packets will be dropped when there are less
* than this many free packet buffers in FPA 0.
* Returns Zero on success. Negative on failure
*/
diff --git a/arch/mips/include/asm/octeon/cvmx-helper-util.h b/arch/mips/include/asm/octeon/cvmx-helper-util.h
index 6a6e52f..01c8ddd 100644
--- a/arch/mips/include/asm/octeon/cvmx-helper-util.h
+++ b/arch/mips/include/asm/octeon/cvmx-helper-util.h
@@ -60,7 +60,7 @@ extern int cvmx_helper_dump_packet(cvmx_wqe_t *work);
* Packets will begin slowly dropping when there are less than
* this many packet buffers free in FPA 0.
* @drop_thresh:
- * All incomming packets will be dropped when there are less
+ * All incoming packets will be dropped when there are less
* than this many free packet buffers in FPA 0.
* Returns Zero on success. Negative on failure
*/
@@ -74,7 +74,7 @@ extern int cvmx_helper_setup_red_queue(int queue, int pass_thresh,
* Packets will begin slowly dropping when there are less than
* this many packet buffers free in FPA 0.
* @drop_thresh:
- * All incomming packets will be dropped when there are less
+ * All incoming packets will be dropped when there are less
* than this many free packet buffers in FPA 0.
* Returns Zero on success. Negative on failure
*/
diff --git a/arch/x86/kernel/cpu/perf_event_amd_ibs.c b/arch/x86/kernel/cpu/perf_event_amd_ibs.c
index 6336bcb..5f0581e 100644
--- a/arch/x86/kernel/cpu/perf_event_amd_ibs.c
+++ b/arch/x86/kernel/cpu/perf_event_amd_ibs.c
@@ -528,7 +528,7 @@ static int perf_ibs_handle_irq(struct perf_ibs *perf_ibs, struct pt_regs *iregs)
if (!test_bit(IBS_STARTED, pcpu->state)) {
/*
* Catch spurious interrupts after stopping IBS: After
- * disabling IBS there could be still incomming NMIs
+ * disabling IBS there could be still incoming NMIs
* with samples that even have the valid bit cleared.
* Mark all this NMIs as handled.
*/
diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index e7d6a13..eae0c7e 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -320,7 +320,7 @@ config HID_LOGITECH_DJ
Say Y if you want support for Logitech Unifying receivers and devices.
Unifying receivers are capable of pairing up to 6 Logitech compliant
devices to the same receiver. Without this driver it will be handled by
- generic USB_HID driver and all incomming events will be multiplexed
+ generic USB_HID driver and all incoming events will be multiplexed
into a single mouse and a single keyboard device.

config LOGITECH_FF
diff --git a/drivers/isdn/hardware/eicon/divacapi.h b/drivers/isdn/hardware/eicon/divacapi.h
index 3942efb..a315a29 100644
--- a/drivers/isdn/hardware/eicon/divacapi.h
+++ b/drivers/isdn/hardware/eicon/divacapi.h
@@ -422,11 +422,11 @@ struct _DIVA_CAPI_ADAPTER {
#define LAPD 6 /* lapd (Q.921) */
#define X25_L2 7 /* x.25 layer-2 */
#define V120_L2 8 /* V.120 layer-2 protocol */
-#define V42_IN 9 /* V.42 layer-2 protocol, incomming */
+#define V42_IN 9 /* V.42 layer-2 protocol, incoming */
#define V42 10 /* V.42 layer-2 protocol */
#define MDM_ATP 11 /* AT Parser built in the L2 */
#define X75_V42BIS 12 /* ISO7776 (X.75 SLP) modified to support V.42 bis compression */
-#define RTPL2_IN 13 /* RTP layer-2 protocol, incomming */
+#define RTPL2_IN 13 /* RTP layer-2 protocol, incoming */
#define RTPL2 14 /* RTP layer-2 protocol */
#define V120_V42BIS 15 /* V.120 layer-2 protocol supporting V.42 bis compression */

@@ -1125,7 +1125,7 @@ extern word li_total_channels;
| Direction | word | Enable compression/decompression for |
| | | 0: All direction |
| | | 1: disable outgoing data |
- | | | 2: disable incomming data |
+ | | | 2: disable incoming data |
| | | 3: disable both direction (default) |
+---------------------+------+-----------------------------------------+
| Number of code | word | Parameter P1 of V.42bis in accordance |
diff --git a/drivers/isdn/hardware/eicon/pc.h b/drivers/isdn/hardware/eicon/pc.h
index 889dc98..329c0c2 100644
--- a/drivers/isdn/hardware/eicon/pc.h
+++ b/drivers/isdn/hardware/eicon/pc.h
@@ -419,11 +419,11 @@ struct dual
#define LAPD 6 /* lapd (Q.921) */
#define X25_L2 7 /* x.25 layer-2 */
#define V120_L2 8 /* V.120 layer-2 protocol */
-#define V42_IN 9 /* V.42 layer-2 protocol, incomming */
+#define V42_IN 9 /* V.42 layer-2 protocol, incoming */
#define V42 10 /* V.42 layer-2 protocol */
#define MDM_ATP 11 /* AT Parser built in the L2 */
#define X75_V42BIS 12 /* x.75 with V.42bis */
-#define RTPL2_IN 13 /* RTP layer-2 protocol, incomming */
+#define RTPL2_IN 13 /* RTP layer-2 protocol, incoming */
#define RTPL2 14 /* RTP layer-2 protocol */
#define V120_V42BIS 15 /* V.120 asynchronous mode supporting V.42bis compression */
#define LISTENER 27 /* Layer 2 to listen line */
diff --git a/drivers/isdn/mISDN/l1oip_core.c b/drivers/isdn/mISDN/l1oip_core.c
index f8e405c..2c0d2c2 100644
--- a/drivers/isdn/mISDN/l1oip_core.c
+++ b/drivers/isdn/mISDN/l1oip_core.c
@@ -689,7 +689,7 @@ l1oip_socket_thread(void *data)
hc->sin_remote.sin_addr.s_addr = htonl(hc->remoteip);
hc->sin_remote.sin_port = htons((unsigned short)hc->remoteport);

- /* bind to incomming port */
+ /* bind to incoming port */
if (socket->ops->bind(socket, (struct sockaddr *)&hc->sin_local,
sizeof(hc->sin_local))) {
printk(KERN_ERR "%s: Failed to bind socket to port %d.\n",
diff --git a/drivers/media/platform/soc_camera/mx2_camera.c b/drivers/media/platform/soc_camera/mx2_camera.c
index 791cd1d..e76dc4d 100644
--- a/drivers/media/platform/soc_camera/mx2_camera.c
+++ b/drivers/media/platform/soc_camera/mx2_camera.c
@@ -345,7 +345,7 @@ static struct mx2_fmt_cfg mx27_emma_prp_table[] = {
/*
* This is a generic configuration which is valid for most
* prp input-output format combinations.
- * We set the incomming and outgoing pixelformat to a
+ * We set the incoming and outgoing pixelformat to a
* 16 Bit wide format and adjust the bytesperline
* accordingly. With this configuration the inputdata
* will not be changed by the emma and could be any type
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index 940ef85..7cb1425 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -8678,7 +8678,7 @@ static void bnx2x_set_234_gates(struct bnx2x *bp, bool close)
(!close) ? (val | HC_CONFIG_0_REG_BLOCK_DISABLE_0) :
(val & ~(u32)HC_CONFIG_0_REG_BLOCK_DISABLE_0));
} else {
- /* Prevent incomming interrupts in IGU */
+ /* Prevent incoming interrupts in IGU */
val = REG_RD(bp, IGU_REG_BLOCK_CONFIGURATION);

REG_WR(bp, IGU_REG_BLOCK_CONFIGURATION,
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_main.c b/drivers/net/ethernet/mellanox/mlx4/en_main.c
index 3a2b8c6..8611c89 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_main.c
@@ -64,7 +64,7 @@ static const char mlx4_en_version[] =

/* Enable RSS UDP traffic */
MLX4_EN_PARM_INT(udp_rss, 1,
- "Enable RSS for incomming UDP traffic or disabled (0)");
+ "Enable RSS for incoming UDP traffic or disabled (0)");

/* Priority pausing */
MLX4_EN_PARM_INT(pfctx, 0, "Priority based Flow Control policy on TX[7:0]."
diff --git a/drivers/net/irda/ali-ircc.c b/drivers/net/irda/ali-ircc.c
index 8487204..9cea451 100644
--- a/drivers/net/irda/ali-ircc.c
+++ b/drivers/net/irda/ali-ircc.c
@@ -993,7 +993,7 @@ static void ali_ircc_change_speed(struct ali_ircc_cb *self, __u32 baud)
/* Enable Interuupt */
self->ier = IER_EOM; // benjamin 2000/11/20 07:24PM

- /* Be ready for incomming frames */
+ /* Be ready for incoming frames */
ali_ircc_dma_receive(self); // benajmin 2000/11/8 07:46PM not complete
}
/* Go to SIR Speed */
diff --git a/drivers/staging/android/binder.h b/drivers/staging/android/binder.h
index 2f7d195..629372f 100644
--- a/drivers/staging/android/binder.h
+++ b/drivers/staging/android/binder.h
@@ -224,7 +224,7 @@ enum BinderDriverReturnProtocol {
BR_SPAWN_LOOPER = _IO('r', 13),
/*
* No parameters. The driver has determined that a process has no
- * threads waiting to service incomming transactions. When a process
+ * threads waiting to service incoming transactions. When a process
* receives this command, it must spawn a new service thread and
* register it via bcENTER_LOOPER.
*/
diff --git a/drivers/staging/octeon/ethernet.c b/drivers/staging/octeon/ethernet.c
index ef32dc1..1335283 100644
--- a/drivers/staging/octeon/ethernet.c
+++ b/drivers/staging/octeon/ethernet.c
@@ -72,7 +72,7 @@ int pow_receive_group = 15;
module_param(pow_receive_group, int, 0444);
MODULE_PARM_DESC(pow_receive_group, "\n"
"\tPOW group to receive packets from. All ethernet hardware\n"
- "\twill be configured to send incomming packets to this POW\n"
+ "\twill be configured to send incoming packets to this POW\n"
"\tgroup. Also any other software can submit packets to this\n"
"\tgroup for the kernel to process.");

diff --git a/drivers/tty/ipwireless/hardware.c b/drivers/tty/ipwireless/hardware.c
index b4ba067..97a511f 100644
--- a/drivers/tty/ipwireless/hardware.c
+++ b/drivers/tty/ipwireless/hardware.c
@@ -646,7 +646,7 @@ static void queue_received_packet(struct ipw_hardware *hw,
(*assem) = pool_allocate(hw, *assem, length);
if (!(*assem)) {
printk(KERN_ERR IPWIRELESS_PCCARD_NAME
- ": no memory for incomming data packet, dropped!\n");
+ ": no memory for incoming data packet, dropped!\n");
return;
}
(*assem)->protocol = protocol;
@@ -670,7 +670,7 @@ static void queue_received_packet(struct ipw_hardware *hw,
packet = pool_allocate(hw, NULL, length);
if (!packet) {
printk(KERN_ERR IPWIRELESS_PCCARD_NAME
- ": no memory for incomming ctrl packet, dropped!\n");
+ ": no memory for incoming ctrl packet, dropped!\n");
return;
}
packet->protocol = protocol;
diff --git a/include/net/irda/irlmp.h b/include/net/irda/irlmp.h
index 591f786..f741091 100644
--- a/include/net/irda/irlmp.h
+++ b/include/net/irda/irlmp.h
@@ -278,7 +278,7 @@ static inline int irlmp_lap_tx_queue_full(struct lsap_cb *self)
}

/* After doing a irlmp_dup(), this get one of the two socket back into
- * a state where it's waiting incomming connections.
+ * a state where it's waiting incoming connections.
* Note : this can be used *only* if the socket is not yet connected
* (i.e. NO irlmp_connect_response() done on this socket).
* - Jean II */
diff --git a/include/net/irda/irttp.h b/include/net/irda/irttp.h
index af4b877..98682d4 100644
--- a/include/net/irda/irttp.h
+++ b/include/net/irda/irttp.h
@@ -185,7 +185,7 @@ static inline __u32 irttp_get_max_seg_size(struct tsap_cb *self)
}

/* After doing a irttp_dup(), this get one of the two socket back into
- * a state where it's waiting incomming connections.
+ * a state where it's waiting incoming connections.
* Note : this can be used *only* if the socket is not yet connected
* (i.e. NO irttp_connect_response() done on this socket).
* - Jean II */
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index 596660d..6ed79a4 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -1921,7 +1921,7 @@ int hci_recv_frame(struct sk_buff *skb)
return -ENXIO;
}

- /* Incomming skb */
+ /* Incoming skb */
bt_cb(skb)->incoming = 1;

/* Time stamp */
diff --git a/net/irda/timer.c b/net/irda/timer.c
index 1d552b3..0c4c115 100644
--- a/net/irda/timer.c
+++ b/net/irda/timer.c
@@ -57,7 +57,7 @@ void irlap_start_query_timer(struct irlap_cb *self, int S, int s)
* Basically, we multiply the number of remaining slots by our
* slot time, plus add some extra time to properly receive the last
* discovery packet (which is longer due to extra discovery info),
- * to avoid messing with for incomming connections requests and
+ * to avoid messing with for incoming connections requests and
* to accommodate devices that perform discovery slower than us.
* Jean II */
timeout = ((sysctl_slot_timeout * HZ / 1000) * (S - s)
diff --git a/net/sctp/sm_make_chunk.c b/net/sctp/sm_make_chunk.c
index e1c5fc2..04df530 100644
--- a/net/sctp/sm_make_chunk.c
+++ b/net/sctp/sm_make_chunk.c
@@ -1201,7 +1201,7 @@ nodata:
* specifically, max(asoc->pathmtu, SCTP_DEFAULT_MAXSEGMENT)
* This is a helper function to allocate an error chunk for
* for those invalid parameter codes in which we may not want
- * to report all the errors, if the incomming chunk is large
+ * to report all the errors, if the incoming chunk is large
*/
static inline struct sctp_chunk *sctp_make_op_error_fixed(
const struct sctp_association *asoc,
--
1.7.8.6

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: anish kumar: "Re: What does ISA/PCI really mean to ARM architecture?"
Previous message: Thadeu Lima de Souza Cascardo: "[PATCH] ppc/EEH: fix crash when adding a device in a slot with DDW"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]