Re: [PATCH 2/4] regulator: 88pm8607: Use apply_[reg|bit] with regmapbased voltage_sel operations

From: Haojian Zhuang
Date: Fri Dec 21 2012 - 11:06:49 EST


On Tue, Dec 18, 2012 at 9:31 AM, Axel Lin <axel.lin@xxxxxxxxxx> wrote:
> Signed-off-by: Axel Lin <axel.lin@xxxxxxxxxx>
> ---
> drivers/regulator/88pm8607.c | 43 ++++++++++++------------------------------
> 1 file changed, 12 insertions(+), 31 deletions(-)
>
> diff --git a/drivers/regulator/88pm8607.c b/drivers/regulator/88pm8607.c
> index 2b55711..9ebdf8c 100644
> --- a/drivers/regulator/88pm8607.c
> +++ b/drivers/regulator/88pm8607.c
> @@ -30,8 +30,6 @@ struct pm8607_regulator_info {
> unsigned int *vol_table;
> unsigned int *vol_suspend;
>
> - int update_reg;
> - int update_bit;
> int slope_double;
> };
>
> @@ -222,29 +220,6 @@ static int pm8607_list_voltage(struct regulator_dev *rdev, unsigned index)
> return ret;
> }
>
> -static int pm8607_set_voltage_sel(struct regulator_dev *rdev, unsigned selector)
> -{
> - struct pm8607_regulator_info *info = rdev_get_drvdata(rdev);
> - uint8_t val;
> - int ret;
> -
> - val = (uint8_t)(selector << (ffs(rdev->desc->vsel_mask) - 1));
> -
> - ret = pm860x_set_bits(info->i2c, rdev->desc->vsel_reg,
> - rdev->desc->vsel_mask, val);
> - if (ret)
> - return ret;
> - switch (info->desc.id) {
> - case PM8607_ID_BUCK1:
> - case PM8607_ID_BUCK3:
> - ret = pm860x_set_bits(info->i2c, info->update_reg,
> - 1 << info->update_bit,
> - 1 << info->update_bit);
> - break;
> - }
> - return ret;
> -}
> -
> static int pm8606_preg_enable(struct regulator_dev *rdev)
> {
> struct pm8607_regulator_info *info = rdev_get_drvdata(rdev);
> @@ -276,7 +251,7 @@ static int pm8606_preg_is_enabled(struct regulator_dev *rdev)
>
> static struct regulator_ops pm8607_regulator_ops = {
> .list_voltage = pm8607_list_voltage,
> - .set_voltage_sel = pm8607_set_voltage_sel,
> + .set_voltage_sel = regulator_set_voltage_sel_regmap,
> .get_voltage_sel = regulator_get_voltage_sel_regmap,
> .enable = regulator_enable_regmap,
> .disable = regulator_disable_regmap,
> @@ -313,11 +288,11 @@ static struct regulator_ops pm8606_preg_ops = {
> .n_voltages = ARRAY_SIZE(vreg##_table), \
> .vsel_reg = PM8607_##vreg, \
> .vsel_mask = ARRAY_SIZE(vreg##_table) - 1, \
> + .apply_reg = PM8607_##ureg, \
> + .apply_bit = (ubit), \
> .enable_reg = PM8607_##ereg, \
> .enable_mask = 1 << (ebit), \
> }, \
> - .update_reg = PM8607_##ureg, \
> - .update_bit = (ubit), \
> .slope_double = (0), \
> .vol_table = (unsigned int *)&vreg##_table, \
> .vol_suspend = (unsigned int *)&vreg##_suspend_table, \
> @@ -343,9 +318,15 @@ static struct regulator_ops pm8606_preg_ops = {
> }
>
> static struct pm8607_regulator_info pm8607_regulator_info[] = {
> - PM8607_DVC(BUCK1, GO, 0, SUPPLIES_EN11, 0),
> - PM8607_DVC(BUCK2, GO, 1, SUPPLIES_EN11, 1),
> - PM8607_DVC(BUCK3, GO, 2, SUPPLIES_EN11, 2),
> + PM8607_DVC(BUCK1, GO, BIT(0), SUPPLIES_EN11, 0),
> + /*
> + * BUCK2 is designed to control voltage of CP domain.
> + * Linux only runs in AP side, so we don't need to control BUCK2 in AP
> + * side. Thus set the apply bit to be 0 instead of BIT(1) to avoid
> + * updating apply_bit for BUCK2.
> + */
> + PM8607_DVC(BUCK2, GO, 0, SUPPLIES_EN11, 1),
Since update bit is already defined in GO register of PM8607, it seems
better to
define it as BIT(1) in this register. Otherwise, the comment is so strange.

I'm sorry on this since I didn't look at your patch carefully in the
first round. Please
help to change it as
PM8607_DVC(BUCK2, GO, BIT(1), SUPPLIES_EN11, 1).

Since I messed it with the implementation of set_voltage_sel() api.

For others, Acked-by: Haojian Zhuang <haojian.zhuang@xxxxxxxxx>

> + PM8607_DVC(BUCK3, GO, BIT(2), SUPPLIES_EN11, 2),
>
> PM8607_LDO(1, LDO1, 0, SUPPLIES_EN11, 3),
> PM8607_LDO(2, LDO2, 0, SUPPLIES_EN11, 4),
> --
> 1.7.9.5
>
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/