Re: [PATCH] usb: phy: samsung: Add support for USB 3.0 phy for exynos5250

From: Vivek Gautam
Date: Wed Dec 19 2012 - 00:44:01 EST


CC: Doug Anderson


On Tue, Dec 18, 2012 at 8:43 PM, Felipe Balbi <balbi@xxxxxx> wrote:
> On Tue, Dec 18, 2012 at 08:40:26PM +0530, Vivek Gautam wrote:
>> Adding support for USB3.0 phy for dwc3 controller on
>> exynos5250 SOC.
>>
>> Signed-off-by: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
>> ---
>> drivers/usb/phy/samsung-usbphy.c | 339 +++++++++++++++++++++++++++++++++++++-
>
> let's make the phy names standard from now on and call this
> phy-samsung.c :-)
>
>> 1 files changed, 337 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/usb/phy/samsung-usbphy.c b/drivers/usb/phy/samsung-usbphy.c
>> index 621348a..246eb28 100644
>> --- a/drivers/usb/phy/samsung-usbphy.c
>> +++ b/drivers/usb/phy/samsung-usbphy.c
>> @@ -154,6 +154,86 @@
>>
>> #define EXYNOS5_PHY_OTG_TUNE (0x40)
>>
>> +/* EXYNOS5: USB 3.0 DRD */
>> +#define EXYNOS5_DRD_LINKSYSTEM (0x04)
>> +
>> +#define LINKSYSTEM_FLADJ_MASK (0x3f << 1)
>> +#define LINKSYSTEM_FLADJ(_x) ((_x) << 1)
>> +#define LINKSYSTEM_XHCI_VERSION_CONTROL (0x1 << 27)
>> +
>> +#define EXYNOS5_DRD_PHYUTMI (0x08)
>> +
>> +#define PHYUTMI_OTGDISABLE (0x1 << 6)
>> +#define PHYUTMI_FORCESUSPEND (0x1 << 1)
>> +#define PHYUTMI_FORCESLEEP (0x1 << 0)
>> +
>> +#define EXYNOS5_DRD_PHYPIPE (0x0c)
>> +
>> +#define EXYNOS5_DRD_PHYCLKRST (0x10)
>> +
>> +#define PHYCLKRST_SSC_REFCLKSEL_MASK (0xff << 23)
>> +#define PHYCLKRST_SSC_REFCLKSEL(_x) ((_x) << 23)
>> +
>> +#define PHYCLKRST_SSC_RANGE_MASK (0x03 << 21)
>> +#define PHYCLKRST_SSC_RANGE(_x) ((_x) << 21)
>> +
>> +#define PHYCLKRST_SSC_EN (0x1 << 20)
>> +#define PHYCLKRST_REF_SSP_EN (0x1 << 19)
>> +#define PHYCLKRST_REF_CLKDIV2 (0x1 << 18)
>> +
>> +#define PHYCLKRST_MPLL_MULTIPLIER_MASK (0x7f << 11)
>> +#define PHYCLKRST_MPLL_MULTIPLIER_100MHZ_REF (0x19 << 11)
>> +#define PHYCLKRST_MPLL_MULTIPLIER_50M_REF (0x02 << 11)
>> +#define PHYCLKRST_MPLL_MULTIPLIER_24MHZ_REF (0x68 << 11)
>> +#define PHYCLKRST_MPLL_MULTIPLIER_20MHZ_REF (0x7d << 11)
>> +#define PHYCLKRST_MPLL_MULTIPLIER_19200KHZ_REF (0x02 << 11)
>> +
>> +#define PHYCLKRST_FSEL_MASK (0x3f << 5)
>> +#define PHYCLKRST_FSEL(_x) ((_x) << 5)
>> +#define PHYCLKRST_FSEL_PAD_100MHZ (0x27 << 5)
>> +#define PHYCLKRST_FSEL_PAD_24MHZ (0x2a << 5)
>> +#define PHYCLKRST_FSEL_PAD_20MHZ (0x31 << 5)
>> +#define PHYCLKRST_FSEL_PAD_19_2MHZ (0x38 << 5)
>> +
>> +#define PHYCLKRST_RETENABLEN (0x1 << 4)
>> +
>> +#define PHYCLKRST_REFCLKSEL_MASK (0x03 << 2)
>> +#define PHYCLKRST_REFCLKSEL_PAD_REFCLK (0x2 << 2)
>> +#define PHYCLKRST_REFCLKSEL_EXT_REFCLK (0x3 << 2)
>> +
>> +#define PHYCLKRST_PORTRESET (0x1 << 1)
>> +#define PHYCLKRST_COMMONONN (0x1 << 0)
>> +
>> +#define EXYNOS5_DRD_PHYREG0 (0x14)
>> +#define EXYNOS5_DRD_PHYREG1 (0x18)
>> +
>> +#define EXYNOS5_DRD_PHYPARAM0 (0x1c)
>> +
>> +#define PHYPARAM0_REF_USE_PAD (0x1 << 31)
>> +#define PHYPARAM0_REF_LOSLEVEL_MASK (0x1f << 26)
>> +#define PHYPARAM0_REF_LOSLEVEL (0x9 << 26)
>> +
>> +#define EXYNOS5_DRD_PHYPARAM1 (0x20)
>> +
>> +#define PHYPARAM1_PCS_TXDEEMPH_MASK (0x1f << 0)
>> +#define PHYPARAM1_PCS_TXDEEMPH (0x1c)
>> +
>> +#define EXYNOS5_DRD_PHYTERM (0x24)
>> +
>> +#define EXYNOS5_DRD_PHYTEST (0x28)
>> +
>> +#define PHYTEST_POWERDOWN_SSP (0x1 << 3)
>> +#define PHYTEST_POWERDOWN_HSP (0x1 << 2)
>> +
>> +#define EXYNOS5_DRD_PHYADP (0x2c)
>> +
>> +#define EXYNOS5_DRD_PHYBATCHG (0x30)
>> +
>> +#define PHYBATCHG_UTMI_CLKSEL (0x1 << 2)
>> +
>> +#define EXYNOS5_DRD_PHYRESUME (0x34)
>> +#define EXYNOS5_DRD_LINKPORT (0x44)
>> +
>> #ifndef MHZ
>> #define MHZ (1000*1000)
>> #endif
>> @@ -164,6 +244,15 @@ enum samsung_cpu_type {
>> TYPE_EXYNOS5250,
>> };
>>
>> +/* structure usb3 - usb3.0 phy trasceiver state
>> + * @phy: transceiver structure for USB 3.0
>> + * @regs_phy: usb 3.0 phy register memory base
>> + */
>> +struct usb3 {
>> + struct usb_phy phy;
>> + void __iomem *regs_phy;
>> +};
>> +
>> /*
>> * struct samsung_usbphy - transceiver driver state
>> * @phy: transceiver structure
>> @@ -192,11 +281,15 @@ struct samsung_usbphy {
>> u32 en_mask;
>> int ref_clk_freq;
>> int cpu_type;
>> + struct usb3 usb3phy;
>> + int has_usb3;
>> enum samsung_usb_phy_type phy_type;
>> atomic_t host_usage;
>> };
>>
>> #define phy_to_sphy(x) container_of((x), struct samsung_usbphy, phy)
>> +#define phy_to_usb3phy(x) container_of((x), struct usb3, phy);
>> +#define usb3phy_to_sphy(x) container_of((x), struct samsung_usbphy, usb3phy)
>>
>> static int samsung_usbphy_parse_dt_param(struct samsung_usbphy *sphy)
>> {
>> @@ -394,6 +487,42 @@ static int samsung_usbphy_get_refclk_freq(struct samsung_usbphy *sphy)
>> return refclk_freq;
>> }
>>
>> +/*
>> + * Sets the phy clk as EXTREFCLK (XXTI) which is internal clock form clock core.
>> + */
>> +static u32 exynos5_usb3phy_set_clock(struct samsung_usbphy *sphy)
>> +{
>> + u32 reg;
>> + u32 refclk;
>> +
>> + refclk = sphy->ref_clk_freq;
>> +
>> + reg = PHYCLKRST_REFCLKSEL_EXT_REFCLK |
>> + PHYCLKRST_FSEL(refclk);
>> +
>> + switch (refclk) {
>> + case HOST_CTRL0_FSEL_CLKSEL_50M:
>> + reg |= (PHYCLKRST_MPLL_MULTIPLIER_50M_REF |
>> + PHYCLKRST_SSC_REFCLKSEL(0x00));
>> + break;
>> + case HOST_CTRL0_FSEL_CLKSEL_20M:
>> + reg |= (PHYCLKRST_MPLL_MULTIPLIER_20MHZ_REF |
>> + PHYCLKRST_SSC_REFCLKSEL(0x00));
>> + break;
>> + case HOST_CTRL0_FSEL_CLKSEL_19200K:
>> + reg |= (PHYCLKRST_MPLL_MULTIPLIER_19200KHZ_REF |
>> + PHYCLKRST_SSC_REFCLKSEL(0x88));
>> + break;
>> + case HOST_CTRL0_FSEL_CLKSEL_24M:
>> + default:
>> + reg |= (PHYCLKRST_MPLL_MULTIPLIER_24MHZ_REF |
>> + PHYCLKRST_SSC_REFCLKSEL(0x88));
>> + break;
>> + }
>> +
>> + return reg;
>> +}
>> +
>> static int exynos5_phyhost_is_on(void *regs)
>> {
>> u32 reg;
>> @@ -403,6 +532,78 @@ static int exynos5_phyhost_is_on(void *regs)
>> return !(reg & HOST_CTRL0_SIDDQ);
>> }
>>
>> +static int samsung_exynos5_usb3phy_enable(struct samsung_usbphy *sphy)
>> +{
>> + void __iomem *regs = sphy->usb3phy.regs_phy;
>> + u32 phyparam0;
>> + u32 phyparam1;
>> + u32 linksystem;
>> + u32 phybatchg;
>> + u32 phytest;
>> + u32 phyclkrst;
>> +
>> + /* Reset USB 3.0 PHY */
>> + writel(0x0, regs + EXYNOS5_DRD_PHYREG0);
>> +
>> + phyparam0 = readl(regs + EXYNOS5_DRD_PHYPARAM0);
>> + /* Select PHY CLK source */
>> + phyparam0 &= ~PHYPARAM0_REF_USE_PAD;
>> + /* Set Loss-of-Signal Detector sensitivity */
>> + phyparam0 &= ~PHYPARAM0_REF_LOSLEVEL_MASK;
>> + phyparam0 |= PHYPARAM0_REF_LOSLEVEL;
>> + writel(phyparam0, regs + EXYNOS5_DRD_PHYPARAM0);
>> +
>> + writel(0x0, regs + EXYNOS5_DRD_PHYRESUME);
>> +
>> + /*
>> + * Setting the Frame length Adj value[6:1] to default 0x20
>> + * See xHCI 1.0 spec, 5.2.4
>> + */
>> + linksystem = LINKSYSTEM_XHCI_VERSION_CONTROL |
>> + LINKSYSTEM_FLADJ(0x20);
>> + writel(linksystem, regs + EXYNOS5_DRD_LINKSYSTEM);
>> +
>> + phyparam1 = readl(regs + EXYNOS5_DRD_PHYPARAM1);
>> + /* Set Tx De-Emphasis level */
>> + phyparam1 &= ~PHYPARAM1_PCS_TXDEEMPH_MASK;
>> + phyparam1 |= PHYPARAM1_PCS_TXDEEMPH;
>> + writel(phyparam1, regs + EXYNOS5_DRD_PHYPARAM1);
>> +
>> + phybatchg = readl(regs + EXYNOS5_DRD_PHYBATCHG);
>> + phybatchg |= PHYBATCHG_UTMI_CLKSEL;
>> + writel(phybatchg, regs + EXYNOS5_DRD_PHYBATCHG);
>> +
>> + /* PHYTEST POWERDOWN Control */
>> + phytest = readl(regs + EXYNOS5_DRD_PHYTEST);
>> + phytest &= ~(PHYTEST_POWERDOWN_SSP |
>> + PHYTEST_POWERDOWN_HSP);
>> + writel(phytest, regs + EXYNOS5_DRD_PHYTEST);
>> +
>> + /* UTMI Power Control */
>> + writel(PHYUTMI_OTGDISABLE, regs + EXYNOS5_DRD_PHYUTMI);
>> +
>> + phyclkrst = exynos5_usb3phy_set_clock(sphy);
>> +
>> + phyclkrst |= PHYCLKRST_PORTRESET |
>> + /* Digital power supply in normal operating mode */
>> + PHYCLKRST_RETENABLEN |
>> + /* Enable ref clock for SS function */
>> + PHYCLKRST_REF_SSP_EN |
>> + /* Enable spread spectrum */
>> + PHYCLKRST_SSC_EN |
>> + /* Power down HS Bias and PLL blocks in suspend mode */
>> + PHYCLKRST_COMMONONN;
>> +
>> + writel(phyclkrst, regs + EXYNOS5_DRD_PHYCLKRST);
>> +
>> + udelay(10);
>> +
>> + phyclkrst &= ~(PHYCLKRST_PORTRESET);
>> + writel(phyclkrst, regs + EXYNOS5_DRD_PHYCLKRST);
>> +
>> + return 0;
>> +}
>> +
>> static void samsung_exynos5_usbphy_enable(struct samsung_usbphy *sphy)
>> {
>> void __iomem *regs = sphy->regs;
>> @@ -541,6 +742,32 @@ static void samsung_usbphy_enable(struct samsung_usbphy *sphy)
>> writel(rstcon, regs + SAMSUNG_RSTCON);
>> }
>>
>> +static void samsung_exynos5_usb3phy_disable(struct samsung_usbphy *sphy)
>> +{
>> + u32 phyutmi;
>> + u32 phyclkrst;
>> + u32 phytest;
>> + void __iomem *regs = sphy->usb3phy.regs_phy;
>> +
>> + phyutmi = PHYUTMI_OTGDISABLE |
>> + PHYUTMI_FORCESUSPEND |
>> + PHYUTMI_FORCESLEEP;
>> + writel(phyutmi, regs + EXYNOS5_DRD_PHYUTMI);
>> +
>> + /* Resetting the PHYCLKRST enable bits to reduce leakage current */
>> + phyclkrst = readl(regs + EXYNOS5_DRD_PHYCLKRST);
>> + phyclkrst &= ~(PHYCLKRST_REF_SSP_EN |
>> + PHYCLKRST_SSC_EN |
>> + PHYCLKRST_COMMONONN);
>> + writel(phyclkrst, regs + EXYNOS5_DRD_PHYCLKRST);
>> +
>> + /* Control PHYTEST to remove leakage current */
>> + phytest = readl(regs + EXYNOS5_DRD_PHYTEST);
>> + phytest |= (PHYTEST_POWERDOWN_SSP |
>> + PHYTEST_POWERDOWN_HSP);
>> + writel(phytest, regs + EXYNOS5_DRD_PHYTEST);
>> +}
>> +
>> static void samsung_exynos5_usbphy_disable(struct samsung_usbphy *sphy)
>> {
>> void __iomem *regs = sphy->regs;
>> @@ -600,6 +827,78 @@ static void samsung_usbphy_disable(struct samsung_usbphy *sphy)
>> /*
>> * The function passed to the usb driver for phy initialization
>> */
>> +static int samsung_usb3phy_init(struct usb_phy *phy)
>> +{
>> + struct usb3 *usb3phy;
>> + struct samsung_usbphy *sphy;
>> + int ret = 0;
>> +
>> + usb3phy = phy_to_usb3phy(phy);
>> + sphy = usb3phy_to_sphy(usb3phy);
>> +
>> + if (!sphy->has_usb3) {
>> + dev_err(sphy->dev, "Not a valid cpu_type for USB 3.0\n");
>> + return -ENODEV;
>> + }
>> +
>> + /* setting default phy-type for USB 3.0 */
>> + samsung_usbphy_set_type(&sphy->usb3phy.phy, USB_PHY_TYPE_DEVICE);
>> +
>> + /* Enable the phy clock */
>> + ret = clk_prepare_enable(sphy->clk);
>> + if (ret) {
>> + dev_err(sphy->dev, "%s: clk_prepare_enable failed\n", __func__);
>> + return ret;
>> + }
>> +
>> + /* Disable phy isolation */
>> + samsung_usbphy_set_isolation(sphy, false, sphy->phy_type);
>> +
>> + /* Initialize usb phy registers */
>> + samsung_exynos5_usb3phy_enable(sphy);
>> +
>> + /* Disable the phy clock */
>> + clk_disable_unprepare(sphy->clk);
>> +
>> + return ret;
>> +}
>> +
>> +/*
>> + * The function passed to the usb driver for phy shutdown
>> + */
>> +static void samsung_usb3phy_shutdown(struct usb_phy *phy)
>> +{
>> + struct usb3 *usb3phy;
>> + struct samsung_usbphy *sphy;
>> +
>> + usb3phy = phy_to_usb3phy(phy);
>> + sphy = usb3phy_to_sphy(usb3phy);
>> +
>> + if (!sphy->has_usb3) {
>> + dev_err(sphy->dev, "Not a valid cpu_type for USB 3.0\n");
>> + return;
>> + }
>> +
>> + /* setting default phy-type for USB 3.0 */
>> + samsung_usbphy_set_type(&sphy->usb3phy.phy, USB_PHY_TYPE_DEVICE);
>> +
>> + if (clk_prepare_enable(sphy->clk)) {
>> + dev_err(sphy->dev, "%s: clk_prepare_enable failed\n", __func__);
>> + return;
>> + }
>> +
>> + /* De-initialize usb phy registers */
>> + samsung_exynos5_usb3phy_disable(sphy);
>> +
>> + /* Enable phy isolation */
>> + samsung_usbphy_set_isolation(sphy, true, sphy->phy_type);
>> +
>> + clk_disable_unprepare(sphy->clk);
>> +}
>> +
>> +/*
>> + * The function passed to the usb driver for phy initialization
>> + */
>> static int samsung_usbphy_init(struct usb_phy *phy)
>> {
>> struct samsung_usbphy *sphy;
>> @@ -682,7 +981,7 @@ static int __devinit samsung_usbphy_probe(struct platform_device *pdev)
>> struct resource *phy_mem;
>> void __iomem *phy_base;
>> struct clk *clk;
>> - int ret;
>> + int ret = 0;
>>
>> phy_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> if (!phy_mem) {
>> @@ -736,7 +1035,41 @@ static int __devinit samsung_usbphy_probe(struct platform_device *pdev)
>>
>> sphy->clk = clk;
>>
>> - return usb_add_phy(&sphy->phy, USB_PHY_TYPE_USB2);
>> + sphy->has_usb3 = (sphy->cpu_type == TYPE_EXYNOS5250);
>> +
>> + if (sphy->has_usb3) {
>> + struct resource *usb3phy_mem;
>> + void __iomem *usb3phy_base;
>> +
>> + usb3phy_mem = platform_get_resource(pdev, IORESOURCE_MEM, 1);
>> + if (!usb3phy_mem) {
>> + dev_err(dev, "%s: missing mem resource\n", __func__);
>> + return -ENODEV;
>> + }
>> +
>> + usb3phy_base = devm_request_and_ioremap(dev, usb3phy_mem);
>> + if (!usb3phy_base) {
>> + dev_err(dev, "%s: register mapping failed\n", __func__);
>> + return -ENXIO;
>> + }
>> +
>> + sphy->usb3phy.regs_phy = usb3phy_base;
>> + sphy->usb3phy.phy.dev = sphy->dev;
>> + sphy->usb3phy.phy.label = "samsung-usb3phy";
>> + sphy->usb3phy.phy.init = samsung_usb3phy_init;
>> + sphy->usb3phy.phy.shutdown = samsung_usb3phy_shutdown;
>> + }
>> +
>> + ret = usb_add_phy(&sphy->phy, USB_PHY_TYPE_USB2);
>> + if (ret)
>> + return ret;
>
> is this realy how your HW behaves ? USB2 and USB3 phys are a single HW
> entity ? I kinda doubt that :-s
>
> --
> balbi



--
Thanks & Regards
Vivek
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/