[GIT PULL] fbdev changes for 3.8

From: Tomi Valkeinen
Date: Fri Dec 14 2012 - 05:22:58 EST

Next message: Stanislaw Gruszka: "[PATCH v2] sched: cputime: avoid multiplication overflow (in commoncases)"
Previous message: Michal Hocko: "[PATCH] memcg,vmscan: do not break out targeted reclaim withoutreclaimed pages"
Next in thread: Linus Torvalds: "Re: [GIT PULL] fbdev changes for 3.8"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hi Linus,

Florian, the fbdev maintainer, has been very busy lately, so I offered to send
the pull request for fbdev for this merge window.

There are a few conflicts, but they look clear to me.
arch/arm/plat-omap/common.c is to be removed.

Tomi

The following changes since commit 9489e9dcae718d5fde988e4a684a0f55b5f94d17:

Linux 3.7-rc7 (2012-11-25 17:59:19 -0800)

are available in the git repository at:

git://gitorious.org/linux-omap-dss2/linux.git tags/fbdev-for-3.8

for you to fetch changes up to e7f5c9a16ea2648a3e85af8e34191026bf3dcb62:

Merge tag 'omapdss-for-3.8' of git://gitorious.org/linux-omap-dss2/linux into for-linus (2012-12-13 14:30:56 +0200)

----------------------------------------------------------------

fbdev changes for 3.8:

OMAPDSS changes, including:
- use dynanic debug prints
- OMAP platform dependency removals
- Creation of compat-layer, helping us to improve omapdrm
- Misc cleanups, aiming to make omadss more in line with the upcoming common
display framework

Exynos DP changes for the 3.8 merge window:
- Device Tree support for Samsung Exynos DP
- SW Link training is cleaned up.
- HPD interrupt is supported.

Samsung Framebuffer changes for the 3.8 merge window:
- The bit definitions of header file are updated.
- Some minor typos are fixed.
- Some minor bugs of s3c_fb_check_var() are fixed.

FB related changes for SH Mobile, Freescale DIU

Add support for the Solomon SSD1307 OLED Controller

----------------------------------------------------------------
Aaro Koskinen (1):
OMAPDSS: panel-n8x0: register the DSS driver after SPI probe

Ajay Kumar (5):
video: exynos_dp: Add device tree support to DP driver
video: exynos_dp: device tree documentation
video: exynos_dp: Reset and initialize DP before requesting irq
video: exynos_dp: Fix incorrect setting for INT_CTL
video: exynos_dp: remove redundant parameters

Archit Taneja (10):
OMAPDSS: Remove acb and acbi fields from omap_dss_device
OMAPDSS: DISPC: Fix calc_scaling_44xx() bugs for writeback pipeline
OMAPDSS: DISPC: Don't allow predecimation for writeback
OMAPDSS: DISPC: Use output width and height to calculate row/pix inc for writeback
OMAPDSS: APPLY: Don't treat an overlay's channel out as shadow bits
OMAPDSS: APPLY: Remove unnecessary variable in dss_apply_irq_handler
OMAPDSS: APPLY: Remove unnecessary call to mg_clear_shadow_dirty
OMAPDSS: Add overlay manager width and height limits as a dispc feature
OMAPDSS: Add a dispc_features struct for OMAP5
OMAPDSS: Use only "omapdss_dss" platform device to get context lost count

Axel Lin (1):
OMAPDSS: Add terminating entry for picodlp_i2c_id table

Chandrabhanu Mahapatra (5):
OMAPDSS: Move definition of DEBUG flag to Makefile
OMAPDSS: Create new debug config options
OMAPDSS: Cleanup DSSDBG with dynamic pr_debug function
OMAPDSS: Replace multi part debug prints with pr_debug
OMAPDSS: Remove dss_debug variable

Chuansheng Liu (2):
OMAPDSS: DISPC: Fix the usage of wait_for_completion_timeout
OMAPDSS: APPLY: Fix the usage of wait_for_completion_timeout

Hideki EIRAKU (1):
fbdev: sh_mobile_lcdc: use dma_mmap_coherent

Jingoo Han (14):
video: s3c-fb: clean the bit definition for WINCON register
video: s3c-fb: move the address definitions for VIDTCON registers
video: s3c-fb: move the address definition for VIDOSD register
video: s3c-fb: move the bit definitions for VIDINTCON0 register
video: s3c-fb: move the bit definitions for WINxMAP and WPALCON register
video: s3c-fb: move the bit definitions for DITHMODE register
video: s3c-fb: add the bit definitions for VIDCON0_VIDOUT_WB
video: s3c-fb: fix typo in comment
video: s3c-fb: fix help message for FB_S3C_DEBUG_REGWRITE
video: s3c-fb: use FIMD_V8_VIDTCON0 for EXYNOS5 FIMD
video: s3c-fb: use dev_get_drvdata() instead of platform_get_drvdata()
video: s3c-fb: add "drop through" comment
video: s3c-fb: return an error when bpp is invalid
video: s3c-fb: fix red offset and length for ARGB232 format

Laurent Pinchart (19):
fbdev: sh_mobile_lcdc: Get display dimensions from the channel structure
fbdev: sh_mobile_lcdc: Rename mode argument to modes
fbdev: sh_mobile_lcdc: Remove priv argument from channel and overlay init
ARM: mach-shmobile: ag5evm: Add LCDC tx_dev field to platform data
fbdev: sh_mipi_dsi: Add channel field to platform data
ARM: mach-shmobile: Initiliaze the new sh_mipi_dsi_info channel field
fbdev: sh_mipi_dsi: Use the sh_mipi_dsi_info channel field
fbdev: sh_mipi_dsi: Use the LCDC entity default mode
fbdev: sh_mipi_dsi: Remove last reference to LCDC platform data
ARM: mach-shmobile: Remove the unused sh_mipi_dsi_info lcd_chan field
fbdev: sh_mipi_dsi: Remove the unused sh_mipi_dsi_info lcd_chan field
fbdev: sh_mobile_lcdc: Store the backlight brightness internally
ARM: mach-shmobile: mackerel: Removed unused get_brightness callback
sh: ap325rxa: Remove unused get_brightness LCDC callback
sh: ecovec24: Remove unused get_brightness LCDC callback
fbdev: sh_mobile_lcdc: Remove unused get_brightness pdata callback
ARM: mach-shmobile: ag5evm: Use the backlight API for brightness control
sh: kfr2r09: Use the backlight API for brightness control
fbdev: sh_mobile_lcdc: Make sh_mobile_lcdc_sys_bus_ops static

Manjunathappa (1):
video: da8xx-fb: clk_get on connection id fck

Manjunathappa, Prakash (2):
da8xx-fb: adopt fb_videomode data for panel information
da8xx-fb: cleanup LCDC configurations

Matthias Brugger (1):
OMAPFB: Delete if statement evaluating a constant.

Maxime Ripard (1):
drivers/video: add support for the Solomon SSD1307 OLED Controller

Pantelis Antoniou (1):
da8xx: Fix revision check on the da8xx driver

Peter Ujfalusi (1):
OMAPDSS: Correct check for the callback pointer in dss_dsi_disable_pads()

Ricardo Neri (8):
OMAPDSS: HDMI: Rename resource variable at probe.
OMAPDSS: HDMI: Convert to devm_request_and_ioremap
OMAPDSS: HDMI: Make panel return dssdev register errors
OMAPDSS: HDMI: Handle panel init error at probe
OMAPDSS: HDMI: Uninit display on device add error
OMAPDSS: HDMI: Add op to get audio DMA port address offset
OMAPDSS: HDMI: Create platform device for audio support
OMAPDSS: HDMI: Remove __exit macro from hdmi_uninit_display

Sachin Kamat (1):
drivers/video/console/softcursor.c: remove redundant NULL check before kfree()

Sean Paul (8):
video: exynos_dp: Check DPCD return codes
video: exynos_dp: Clean up SW link training
video: exynos_dp: Get pll lock before pattern set
video: exynos_dp: Improve EDID error handling
video: exynos_dp: Fix bug when checking dp->irq
video: exynos_dp: Remove sink control to D0
video: exynos_dp: Move hotplug into a workqueue
video: exynos_dp: Enable hotplug interrupts

Timur Tabi (9):
MAINTAINERS: Make Timur Tabi the maintainer for the Freescale DIU driver
drivers/video: fsl-diu-fb: simplify platforms that have only one port
drivers/video: fsl-diu-fb: add support for set_gamma ioctls
drivers/video: fsl-diu-fb: streamline enabling of interrupts
drivers/video: fsl-diu-fb: improve message displays
drivers/video: fsl-diu-fb: remove unused 'cursor_reset' variable
drivers/video: fsl-diu-fb: clean up reset of primary display
drivers/video: fsl-diu-fb: don't touch registers for unused features
drivers/video: fsl-diu-fb: store EDID data in the global object

Tomi Valkeinen (113):
Merge tag 'v3.7-rc1'
OMAPDSS: add missing sizes.h includes
OMAPDSS: fix compilation warnings
OMAPDSS: remove Kconfig dependencies
Merge branch '3.8/dss-version'
Merge branch '3.8/vrfb-conversion'
OMAPDSS: DSI: fix dsi_get_dsidev_from_id()
OMAPDSS: fix registering the vsync isr in apply
OMAPDSS: DISPC: constify function parameters
OMAPDSS: combine LCD related config into one func
OMAPDSS: remove declarations for non-existing funcs
OMAPDSS: DISPC: remove struct omap_overlay use
OMAPDSS: DISPC: cleanup lcd and digit enable
OMAPDSS: DISPC: add dispc_mgr_get_sync_lost_irq()
OMAPDSS: DISPC: cleanup lcd/digit enable/disable
OMAPDSS: remove omap_dss_device's suspend/resume
OMAPDSS: get the dss version from core pdev
OMAPDSS: remove dispc_irq_handler declaration
OMAPDSS: DISPC: fix dispc_mgr_lclk_rate for DIGIT output
OMAPDSS: export dss_get_def_display_name()
OMAPDSS: remove initial display code from omapdss
OMAPDSS: DISPC: use dss_feat_get_num_ovls()
OMAPDSS: DISPC: rename dispc_mgr_enable/disable to _sync
OMAPDSS: DISPC: make _enable_mgr_out public as "dispc_mgr_enable"
OMAPDSS: add dispc_ovl_enabled()
OMAPDSS: DISPC: Add IRQ enable/status helpers
OMAPDSS: HDMI: split power_on/off to two parts
OMAPDSS: HDMI: use core power on/off with edid & detect
OMAPDSS: HDMI: add 1920x1200 video mode
OMAPDSS: HDMI: make hdmi pclk check more permissive
OMAPFB: remove use of extended edid block
OMAPFB: improve mode selection from EDID
OMAPDSS: fix DSI2 PLL clk names
OMAPDSS: DISPC: fix loop in error handler
OMAPDSS: DISPC: remove dssdev depependency from error handler
OMAPDSS: split hdmi muxing function
Merge branch '3.8/misc-2'
OMAPDSS: fix DPI & DSI init order
OMAPDSS: DSI: skip odd dividers when pck >= 100MHz
OMAPDSS: DSI: workaround for HSDiv problem
OMAPDSS: add dss_calc_clock_rates() back
OMAPDSS: setup default dss fck
OMAPDSS: hide dss_select_dispc_clk_source()
OMAPDSS: DPI: use dpi.dsidev to see whether to use dsi pll
OMAPDSS: DPI: verify if DSI PLL is operational
OMAPDSS: DPI: always use DSI PLL if available
Merge branch '3.8/dsi-pll-work'
OMAPDSS: DISPC: fix DS variable name
OMAPDSS: DISPC: fix sparse warning
OMAPDSS: HACK: look for regulators with omap4 names
OMAP: FB: use DMA_BIT_MASK() for fb's coherent_dma_mask
OMAPFB: use dma_alloc_attrs to allocate memory
OMAP: RX51: remove use of vram
OMAP: common.c: remove init call to vram
OMAP: remove vram allocator
Revert "OMAPDSS: HDMI: Create platform device for audio support"
Merge tag 'v3.7-rc4'
Merge branch '3.8/vram-conversion' of git://gitorious.org/linux-omap-dss2/linux
OMAPFB: fix compilation error
Merge tag 'omapdss-for-3.7-rc' of git://gitorious.org/linux-omap-dss2/linux
Merge branch 'lcdc-next' of git://linuxtv.org/pinchartl/fbdev into for-linus
Merge branch 'fbdev-next' of github.com:timur-tabi/linux-2.6 into for-linus
OMAPDSS: remove declarations for non-existing functions
OMAPDSS: DPI: fix crash with dpi_verify_dsi_pll()
OMAPDSS: don't WARN if there's no DSI device
OMAPDSS: DISPC: add no_framedone_tv feat
OMAPDSS: DISPC: use get_framedone_irq in disable_digit_out
OMAPDSS: DISPC: Remove blocking code from dispc_wb_enable()
OMAPDSS: cleanup WB enable/is_enabled functions
OMAPDSS: DISPC: use WARN_ON() in dispc_mgr_go
OMAPDSS: DISPC: pclk & lclk rates for writeback
OMAPDSS: DISPC: pass pclk to calc_core_clk()
OMAPDSS: DISPC: pass pclk & lclk to check_horiz_timing_omap3
OMAPDSS: DISPC: pass pclk & lclk to calc_scaling
OMAPDSS: DISPC: pass pclk & lclk to dispc_ovl_calc_scaling
OMAPDSS: create display-sysfs.c
OMAPDSS: add dss_get_core_pdev()
Merge branch 'samsung-fb-next' of git://github.com/jingoo/linux into for-linus
Merge branch 'exynos-dp-next' of git://github.com/jingoo/linux into for-linus
[media] omap_vout: use omapdss's version instead of cpu_is_*
[media] omap_vout: remove extra include
OMAPFB: remove exported udpate window
OMAPFB: move dssdev->sync call out from omapfb_realloc_fbmem
OMAPFB: simplify locking
OMAPFB: remove warning when trying to alloc at certain paddress
OMAPDSS: manage output-dssdev connection in output drivers
OMAPFB: connect ovl managers to all dssdevs
OMAPDSS: add omapdss_compat_init()
OMAPDSS: move ovl & ovl-mgr init to apply.c
OMAPDSS: move ovl-mgr function setup to apply.c
OMAPDSS: move ovl function setup to apply.c
OMAPDSS: add manager ops
OMAPDSS: manage framedone irq with mgr ops
OMAPDSS: move blocking mgr enable/disable to compat layer
OMAPDSS: move omap_dispc_wait_for_irq_interruptible_timeout to dispc-compat.c
OMAPDSS: move irq handling to dispc-compat
OMAPDSS: DISPC: add dispc_ovl_check()
OMAPDSS: DPI: use dispc's check_timings
OMAPDSS: move display sysfs init to compat layer
OMAPDSS: separate compat files in the Makefile
OMAPDSS: export dss_mgr_ops functions
OMAPDSS: export dss_feat functions
OMAPDSS: export dispc functions
OMAPDSS: use omapdss_compat_init() in other drivers
Merge omapdss compat layer work
OMAPDSS: DISPC: get dss clock rate from dss driver
OMAPDSS: DISPC: remove dispc fck uses
OMAPFB: use devm_kzalloc to allocate omapfb2_device
OMAPFB: fix error handling in omapfb_find_best_mode()
OMAPFB: remove silly loop in fb2display()
Revert "OMAPFB: simplify locking"
OMAPDSS: fix TV-out issue with DSI PLL
Merge tag 'omapdss-for-3.8' of git://gitorious.org/linux-omap-dss2/linux into for-linus

Wei Yongjun (1):
OMAPDSS: HDMI: fix missing unlock on error in hdmi_dump_regs()

Documentation/arm/OMAP/DSS | 10 +-
.../devicetree/bindings/video/exynos_dp.txt | 80 ++
.../devicetree/bindings/video/ssd1307fb.txt | 24 +
MAINTAINERS | 6 +
arch/arm/mach-davinci/da830.c | 2 +-
arch/arm/mach-davinci/da850.c | 2 +-
arch/arm/mach-davinci/devices-da8xx.c | 22 +-
arch/arm/mach-davinci/pm_domain.c | 1 +
arch/arm/mach-omap2/board-rx51-video.c | 14 -
arch/arm/mach-omap2/board-rx51.c | 3 -
arch/arm/mach-omap2/display.c | 53 +-
arch/arm/mach-omap2/sdrc.c | 16 -
arch/arm/mach-shmobile/board-ag5evm.c | 198 ++--
arch/arm/mach-shmobile/board-ap4evb.c | 4 +-
arch/arm/mach-shmobile/board-mackerel.c | 6 -
arch/arm/plat-omap/common.c | 2 -
arch/arm/plat-omap/fb.c | 66 +-
arch/arm/plat-omap/include/plat/sdrc.h | 7 -
arch/arm/plat-omap/include/plat/vram.h | 43 -
arch/sh/boards/mach-ap325rxa/setup.c | 6 -
arch/sh/boards/mach-ecovec24/setup.c | 6 -
arch/sh/boards/mach-kfr2r09/lcd_wqvga.c | 16 +-
arch/sh/boards/mach-kfr2r09/setup.c | 7 +-
arch/sh/include/mach-kfr2r09/mach/kfr2r09.h | 6 +-
drivers/media/platform/omap/omap_vout.c | 23 +-
drivers/media/platform/omap/omap_vout_vrfb.c | 2 +-
drivers/media/platform/omap/omap_voutdef.h | 2 +-
drivers/media/platform/omap/omap_voutlib.c | 38 +-
drivers/media/platform/omap/omap_voutlib.h | 3 +
drivers/staging/omapdrm/omap_drv.c | 11 +
drivers/video/Kconfig | 17 +-
drivers/video/Makefile | 1 +
drivers/video/console/softcursor.c | 3 +-
drivers/video/da8xx-fb.c | 170 ++-
drivers/video/exynos/exynos_dp_core.c | 697 ++++++++-----
drivers/video/exynos/exynos_dp_core.h | 21 +-
drivers/video/exynos/exynos_dp_reg.c | 77 +-
drivers/video/exynos/exynos_dp_reg.h | 3 +-
drivers/video/fsl-diu-fb.c | 201 ++--
drivers/video/omap2/Kconfig | 3 -
drivers/video/omap2/Makefile | 1 -
drivers/video/omap2/displays/panel-acx565akm.c | 23 -
drivers/video/omap2/displays/panel-generic-dpi.c | 36 -
.../omap2/displays/panel-lgphilips-lb035q02.c | 34 -
drivers/video/omap2/displays/panel-n8x0.c | 89 +-
.../omap2/displays/panel-nec-nl8048hl11-01b.c | 24 -
drivers/video/omap2/displays/panel-picodlp.c | 45 +-
.../video/omap2/displays/panel-sharp-ls037v7dw01.c | 17 -
drivers/video/omap2/displays/panel-taal.c | 72 --
drivers/video/omap2/displays/panel-tfp410.c | 33 -
.../video/omap2/displays/panel-tpo-td043mtea1.c | 20 -
drivers/video/omap2/dss/Kconfig | 35 +-
drivers/video/omap2/dss/Makefile | 7 +-
drivers/video/omap2/dss/apply.c | 331 ++++--
drivers/video/omap2/dss/core.c | 72 +-
drivers/video/omap2/dss/dispc-compat.c | 667 ++++++++++++
drivers/video/omap2/dss/dispc-compat.h | 30 +
drivers/video/omap2/dss/dispc.c | 1102 ++++++--------------
drivers/video/omap2/dss/display-sysfs.c | 321 ++++++
drivers/video/omap2/dss/display.c | 386 +------
drivers/video/omap2/dss/dpi.c | 126 ++-
drivers/video/omap2/dss/dsi.c | 247 +++--
drivers/video/omap2/dss/dss.c | 138 ++-
drivers/video/omap2/dss/dss.h | 124 +--
drivers/video/omap2/dss/dss_features.c | 79 +-
drivers/video/omap2/dss/dss_features.h | 12 +-
drivers/video/omap2/dss/hdmi.c | 158 ++-
drivers/video/omap2/dss/hdmi_panel.c | 82 +-
drivers/video/omap2/dss/manager.c | 39 -
drivers/video/omap2/dss/output.c | 90 +-
drivers/video/omap2/dss/overlay.c | 17 -
drivers/video/omap2/dss/rfbi.c | 23 +-
drivers/video/omap2/dss/sdi.c | 11 +-
drivers/video/omap2/dss/ti_hdmi.h | 3 +
drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c | 11 +-
drivers/video/omap2/dss/venc.c | 11 +-
drivers/video/omap2/dss/venc_panel.c | 19 -
drivers/video/omap2/omapfb/Kconfig | 1 -
drivers/video/omap2/omapfb/omapfb-ioctl.c | 48 +-
drivers/video/omap2/omapfb/omapfb-main.c | 212 ++--
drivers/video/omap2/omapfb/omapfb-sysfs.c | 6 +-
drivers/video/omap2/omapfb/omapfb.h | 20 +-
drivers/video/omap2/vram.c | 514 ---------
drivers/video/omap2/vrfb.c | 142 ++-
drivers/video/s3c-fb.c | 24 +-
drivers/video/sh_mipi_dsi.c | 69 +-
drivers/video/sh_mobile_lcdcfb.c | 74 +-
drivers/video/sh_mobile_lcdcfb.h | 1 +
drivers/video/ssd1307fb.c | 396 +++++++
include/linux/fsl-diu-fb.h | 9 +
include/video/da8xx-fb.h | 25 +-
include/video/omapdss.h | 105 +-
.../plat/vrfb.h => include/video/omapvrfb.h | 2 +
include/video/samsung_fimd.h | 168 +--
include/video/sh_mipi_dsi.h | 4 +-
include/video/sh_mobile_lcdc.h | 1 -
96 files changed, 4355 insertions(+), 3873 deletions(-)
create mode 100644 Documentation/devicetree/bindings/video/exynos_dp.txt
create mode 100644 Documentation/devicetree/bindings/video/ssd1307fb.txt
delete mode 100644 arch/arm/plat-omap/include/plat/vram.h
create mode 100644 drivers/video/omap2/dss/dispc-compat.c
create mode 100644 drivers/video/omap2/dss/dispc-compat.h
create mode 100644 drivers/video/omap2/dss/display-sysfs.c
delete mode 100644 drivers/video/omap2/vram.c
create mode 100644 drivers/video/ssd1307fb.c
rename arch/arm/plat-omap/include/plat/vrfb.h => include/video/omapvrfb.h (95%)

Attachment: signature.asc
Description: OpenPGP digital signature

Next message: Stanislaw Gruszka: "[PATCH v2] sched: cputime: avoid multiplication overflow (in commoncases)"
Previous message: Michal Hocko: "[PATCH] memcg,vmscan: do not break out targeted reclaim withoutreclaimed pages"
Next in thread: Linus Torvalds: "Re: [GIT PULL] fbdev changes for 3.8"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]