Re: [V2 PATCH 1/2] rtc: sa1100: move clock enable/disable to probe/remove

From: Haojian Zhuang
Date: Wed Dec 05 2012 - 02:04:55 EST


On Wed, Dec 5, 2012 at 2:49 PM, Chao Xie <chao.xie@xxxxxxxxxxx> wrote:
> The original sa1100_rtc_open/sa1100_rtc_release will be called
> when the /dev/rtc0 is opened or closed.
> In fact, these two functions will enable/disable the clock.
> Disabling clock will make rtc not work.
> So only enable/disable clock when probe/remove the device.
>
> Signed-off-by: Chao Xie <chao.xie@xxxxxxxxxxx>
> ---
> drivers/rtc/rtc-sa1100.c | 11 ++++++-----
> 1 files changed, 6 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/rtc/rtc-sa1100.c b/drivers/rtc/rtc-sa1100.c
> index 50a5c4a..34f66b8 100644
> --- a/drivers/rtc/rtc-sa1100.c
> +++ b/drivers/rtc/rtc-sa1100.c
> @@ -108,9 +108,6 @@ static int sa1100_rtc_open(struct device *dev)
> struct rtc_device *rtc = info->rtc;
> int ret;
>
> - ret = clk_prepare_enable(info->clk);
> - if (ret)
> - goto fail_clk;
> ret = request_irq(info->irq_1hz, sa1100_rtc_interrupt, 0, "rtc 1Hz", dev);
> if (ret) {
> dev_err(dev, "IRQ %d already in use.\n", info->irq_1hz);
> @@ -130,7 +127,6 @@ static int sa1100_rtc_open(struct device *dev)
> free_irq(info->irq_1hz, dev);
> fail_ui:
> clk_disable_unprepare(info->clk);
> - fail_clk:
> return ret;
> }
>
> @@ -144,7 +140,6 @@ static void sa1100_rtc_release(struct device *dev)
>
> free_irq(info->irq_alarm, dev);
> free_irq(info->irq_1hz, dev);
> - clk_disable_unprepare(info->clk);
> }
>
> static int sa1100_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
> @@ -253,6 +248,9 @@ static int sa1100_rtc_probe(struct platform_device *pdev)
> spin_lock_init(&info->lock);
> platform_set_drvdata(pdev, info);
>
> + ret = clk_prepare_enable(info->clk);
> + if (ret)
> + goto err_enable_clk;
> /*
> * According to the manual we should be able to let RTTR be zero
> * and then a default diviser for a 32.768KHz clock is used.
> @@ -305,6 +303,8 @@ static int sa1100_rtc_probe(struct platform_device *pdev)
>
> return 0;
> err_dev:
> + clk_disable_unprepare(info->clk);
> +err_enable_clk:
> platform_set_drvdata(pdev, NULL);
> clk_put(info->clk);
> err_clk:
> @@ -318,6 +318,7 @@ static int sa1100_rtc_remove(struct platform_device *pdev)
>
> if (info) {
> rtc_device_unregister(info->rtc);
> + clk_disable_unprepare(info->clk);
> clk_put(info->clk);
> platform_set_drvdata(pdev, NULL);
> kfree(info);
> --
> 1.7.4.1
>

Acked-by: Haojian Zhuang <haojian.zhuang@xxxxxxxxx>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/