[PATCH v2] net: phy: smsc: force all capable mode if the phy is started in powerdown mode

From: Philippe Reynes
Date: Tue Dec 04 2012 - 13:52:33 EST


A SMSC PHY in power down mode can't be used.
If a SMSC PHY is in this mode in the config_init
stage, the mode "all capable" is set. So the PHY
could then be used.

Signed-off-by: Philippe Reynes <tremyfr@xxxxxxxx>
---
Difference between v1 and v2:
- move comment after first block
- update comment to network rules

drivers/net/phy/smsc.c | 26 +++++++++++++++++++++++++-
include/linux/smscphy.h | 5 +++++
2 files changed, 30 insertions(+), 1 deletions(-)

diff --git a/drivers/net/phy/smsc.c b/drivers/net/phy/smsc.c
index 88e3991..ad4fa0e 100644
--- a/drivers/net/phy/smsc.c
+++ b/drivers/net/phy/smsc.c
@@ -43,7 +43,31 @@ static int smsc_phy_ack_interrupt(struct phy_device *phydev)

static int smsc_phy_config_init(struct phy_device *phydev)
{
- int rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS);
+ int rc = phy_read(phydev, MII_LAN83C185_SPECIAL_MODES);
+ if (rc < 0)
+ return rc;
+
+ /* If the SMSC PHY is in power down mode, then set it
+ * in all capable mode before using it.
+ */
+ if ((rc & MII_LAN83C185_MODE_MASK) == MII_LAN83C185_MODE_POWERDOWN) {
+ int timeout = 50000;
+
+ /* set "all capable" mode and reset the phy */
+ rc |= MII_LAN83C185_MODE_ALL;
+ phy_write(phydev, MII_LAN83C185_SPECIAL_MODES, rc);
+ phy_write(phydev, MII_BMCR, BMCR_RESET);
+
+ /* wait end of reset (max 500 ms) */
+ do {
+ udelay(10);
+ if (timeout-- == 0)
+ return -1;
+ rc = phy_read(phydev, MII_BMCR);
+ } while (rc & BMCR_RESET);
+ }
+
+ rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS);
if (rc < 0)
return rc;

diff --git a/include/linux/smscphy.h b/include/linux/smscphy.h
index ce718cb..f4bf16e 100644
--- a/include/linux/smscphy.h
+++ b/include/linux/smscphy.h
@@ -4,6 +4,7 @@
#define MII_LAN83C185_ISF 29 /* Interrupt Source Flags */
#define MII_LAN83C185_IM 30 /* Interrupt Mask */
#define MII_LAN83C185_CTRL_STATUS 17 /* Mode/Status Register */
+#define MII_LAN83C185_SPECIAL_MODES 18 /* Special Modes Register */

#define MII_LAN83C185_ISF_INT1 (1<<1) /* Auto-Negotiation Page Received */
#define MII_LAN83C185_ISF_INT2 (1<<2) /* Parallel Detection Fault */
@@ -22,4 +23,8 @@
#define MII_LAN83C185_EDPWRDOWN (1 << 13) /* EDPWRDOWN */
#define MII_LAN83C185_ENERGYON (1 << 1) /* ENERGYON */

+#define MII_LAN83C185_MODE_MASK 0xE0
+#define MII_LAN83C185_MODE_POWERDOWN 0xC0 /* Power Down mode */
+#define MII_LAN83C185_MODE_ALL 0xE0 /* All capable mode */
+
#endif /* __LINUX_SMSCPHY_H__ */
--
1.7.4.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/