Re: [PATCH][GPIO] Add IRQ edge setter to gpiolib

[Grant Likely]

On Fri, 5 Oct 2012 14:20:55 +0200, Drasko DRASKOVIC <drasko.draskovic@xxxxxxxxx> wrote:
> Hi all,
> please find a patch that adds IRQ edge set-up mechanism to sysfs that
> can be called from the kernel.
> 
> This functionality can be very useful for embedded systems, as it
> permits kernel to do GPIO set-up during boot stage. Configuration
> which defines pins behavior is often kept in NVRAM, and during boot
> stage these structures can be parsed and executed by the kernel, so
> that when user processes already find all sysfs environment ready and
> correctly set-up.
> 
> While at the present it is possible to export GPIO pins to sysfs (and
> correct direction / value), it is not possible to export IRQ
> configuration as well, so this must be done in user space (most often
> via command line). this patch implements missing functionality, so
> that  gpio_sysfs_set_edge() function can be called directly from the
> kernel.

This really seems like the wrong place to be doing this. If the GPIO
needs to be used with a particular configuration for an IRQ, then the
device tree or platform data on non-dt should be given that information.
I do not feel good about exporting anonymnous IRQ configuration to
userspace.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/