Re: [PATCH 3/4] imx27-dt: configure i2c1 gpio on armadeus apf27

[Thomas Petazzoni]

Dear Philippe Reynes,

On Sun, 25 Nov 2012 21:17:04 +0100, Philippe Reynes wrote:

>  static const struct of_dev_auxdata imx27_auxdata_lookup[] __initconst = {
> @@ -48,6 +49,10 @@ int apf27_lan8700_wakeup(struct phy_device *phydev)
>  static void __init apf27_init(void)
>  {
>  	phy_register_fixup_for_id("imx27-fec.0-1:1f", apf27_lan8700_wakeup);
> +
> +	/* configure i2c1 gpio */
> +	mxc_gpio_mode((GPIO_PORTD | GPIO_OUT | GPIO_PF | 17));
> +	mxc_gpio_mode((GPIO_PORTD | GPIO_OUT | GPIO_PF | 18));
>  }

I haven't followed i.MX 27 support lately, but this surely should be
done using a pinctrl driver. I see that there is a general pinctrl
driver for i.MX, but a drivers/pinctrl/pinctrl-imx27.c might be
missing. It would probably be a better idea to implement the missing
pinctrl driver, if not already available?

Best regards,

Thomas
-- 
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/