Re: 82571EB: Detected Hardware Unit Hang

From: Joe Jin
Date: Mon Nov 19 2012 - 00:38:26 EST


On 11/16/12 04:26, Dave, Tushar N wrote:
>> Would you please help to fine the offset of max payload size in eeprom?
>> I'd like to have a try to modify it by ethtool.
>
> It is defined using bit 8 of word 0x1A.
> Bit value 0 = 128B , bit value 1 = 256B

Hi Tushar,

I checked one of my server which Max Payload Size is 128:

# lspci -vvv -s 52:00.1
52:00.1 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet Controller (rev 06)
Subsystem: Intel Corporation PRO/1000 PT Quad Port Server Adapter
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 266
Region 0: Memory at dfea0000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at dfe80000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at 6020 [size=32]
[virtual] Expansion ROM at d8120000 [disabled] [size=128K]
Capabilities: [c8] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee00000 Data: 409a
Capabilities: [e0] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 4096 bytes
DevSta: CorrErr- UncorrErr- FatalErr+ UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s, Latency L0 <4us, L1 <64us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
UESvrt: DLP+ SDES- TLP+ FCP+ CmpltTO+ CmpltAbrt+ UnxCmplt+ RxOF+ MalfTLP+ ECRC- UnsupReq+ ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr+ BadTLP+ BadDLLP+ Rollover+ Timeout+ NonFatalErr-
AERCap: First Error Pointer: 14, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [140 v1] Device Serial Number 00-15-17-ff-ff-16-ed-86
Kernel driver in use: e1000e
Kernel modules: e1000e

And eeprom dump as below:

Offset Values
------ ------
0x0000 00 15 17 16 ed 86 24 05 ff ff a2 50 ff ff ff ff
0x0010 57 d4 07 74 2f a4 a4 11 86 80 a4 10 86 80 65 b1
0x0020 08 00 a4 10 00 58 00 00 01 50 00 00 00 00 00 01
0x0030 f6 6c b0 37 a6 07 03 84 83 07 00 00 03 c3 02 06
0x0040 08 00 f0 0e 64 21 40 00 01 40 00 00 00 00 00 00
0x0050 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0060 00 01 00 40 1e 12 07 40 00 01 00 40 ff ff ff ff


If I did not misunderstand, the value of offset 0x1a is 0x07a6, then the bit 8 is 1, but
my NIC's MPS is 128b, anything I'm wrong?

Thanks,
Joe

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/