Re: [PATCH 4/4] perf, amd: Enable northbridge performance counterson AMD family 15h

[Jacob Shin]

On Fri, Nov 16, 2012 at 07:43:44PM +0100, Robert Richter wrote:
> Jacob,
> 
> On 15.11.12 15:31:53, Jacob Shin wrote:
> > On AMD family 15h processors, there are 4 new performance counters
> > (in addition to 6 core performance counters) that can be used for
> > counting northbridge events (i.e. DRAM accesses). Their bit fields are
> > almost identical to the core performance counters. However, unlike the
> > core performance counters, these MSRs are shared between multiple
> > cores (that share the same northbridge). We will reuse the same code
> > path as existing family 10h northbridge event constraints handler
> > logic to enforce this sharing.
> > 
> > These new counters are indexed contiguously right above the existing
> > core performance counters, and their indexes correspond to RDPMC ECX
> > values.
> > 
> > Signed-off-by: Jacob Shin <jacob.shin@xxxxxxx>
> 
> your approach looks ok to me in general, but see my comments inline.
> 
> > @@ -156,31 +161,28 @@ static inline int amd_pmu_addr_offset(int index)
> >  	if (offset)
> >  		return offset;
> >  
> > -	if (!cpu_has_perfctr_core)
> > +	if (!cpu_has_perfctr_core) {
> >  		offset = index;
> > -	else
> > +		ncore = AMD64_NUM_COUNTERS;
> > +	} else {
> >  		offset = index << 1;
> > +		ncore = AMD64_NUM_COUNTERS_CORE;
> > +	}
> > +
> > +	/* find offset of NB counters with respect to x86_pmu.eventsel */
> > +	if (cpu_has_perfctr_nb) {
> > +		if (index >= ncore && index < (ncore + AMD64_NUM_COUNTERS_NB))
> > +			offset = (MSR_F15H_NB_PERF_CTL - x86_pmu.eventsel) +
> > +				 ((index - ncore) << 1);
> > +	}
> 
> There is duplicate calculatoin of offset in some cases. Better we
> avoid this.

Which cases? The code calculates the offset for a given index the very
first time it is called, stores it, and uses that stored offset from
then on. My [PATCH 3/4] sets that up.

> 
> > +static int __amd_nb_hw_config(struct perf_event *event)
> > +{
> > +	if (event->attr.exclude_user || event->attr.exclude_kernel ||
> > +	    event->attr.exclude_host || event->attr.exclude_guest)
> > +		return -EINVAL;
> >  
> > -	event->hw.config |= event->attr.config & AMD64_RAW_EVENT_MASK;
> > +	event->hw.config &= ~ARCH_PERFMON_EVENTSEL_USR;
> > +	event->hw.config &= ~ARCH_PERFMON_EVENTSEL_OS;
> > +
> > +	if (event->hw.config & ~(AMD64_EVENTSEL_EVENT        |
> > +				 ARCH_PERFMON_EVENTSEL_UMASK |
> > +				 ARCH_PERFMON_EVENTSEL_INT   |
> > +				 AMD_PERFMON_EVENTSEL_INT_CORE_ENABLE |
> > +				 AMD_PERFMON_EVENTSEL_INT_CORE_SEL_MASK))
> > +		return -EINVAL;
> >  
> >  	return 0;
> >  }
> 
> Comments are missing and an AMD64_NB_EVENT_MASK macro should be
> defined for the above. See my previous version for reference:
> 
> /*
>  * AMD NB counters (MSRs 0xc0010240 etc.) do not support the following
>  * flags:
>  *
>  *  Host/Guest Only
>  *  Counter Mask
>  *  Invert Comparison
>  *  Edge Detect
>  *  Operating-System Mode
>  *  User Mode
>  *
>  * Try to fix the config for default settings, otherwise fail.
>  */
> static int amd_nb_event_config(struct perf_event *event)
> {
>        if (!amd_is_nb_perfctr_event(&event->hw))
>                return 0;
> 
>        if (event->attr.exclude_host || event->attr.exclude_guest
>            || event->attr.exclude_user || event->attr.exclude_kernel)
>                goto fail;
> 
>        event->hw.config &= ~(ARCH_PERFMON_EVENTSEL_USR | ARCH_PERFMON_EVENTSEL_OS);
> 
>        if (event->hw.config & ~(AMD64_NB_EVENT_MASK | ARCH_PERFMON_EVENTSEL_INT))
>                goto fail;
> 
>        return 0;
> fail:
>        pr_debug("Invalid nb counter config value: %016Lx\n", event->hw.config);
>        return -EINVAL;
> }
> 
> 
> > @@ -323,6 +368,16 @@ __amd_get_nb_event_constraints(struct cpu_hw_events *cpuc, struct perf_event *ev
> >  	if (new == -1)
> >  		return &emptyconstraint;
> >  
> > +	/* set up interrupts to be delivered only to this core */
> > +	if (cpu_has_perfctr_nb) {
> > +		struct cpuinfo_x86 *c = &cpu_data(smp_processor_id());
> > +
> > +		hwc->config |= AMD_PERFMON_EVENTSEL_INT_CORE_ENABLE;
> > +		hwc->config &= ~AMD_PERFMON_EVENTSEL_INT_CORE_SEL_MASK;
> > +		hwc->config |= (0ULL | (c->cpu_core_id)) <<
> > +			AMD_PERFMON_EVENTSEL_INT_CORE_SEL_SHIFT;
> > +	}
> 
> Looks like a hack to me. The constaints handler is only supposed to
> determine constraints and not to touch anything in the event's
> structure. This should be done later when setting up hwc->config in
> amd_nb_event_config() or so.

Hm.. is the hwc->config called after constraints have been set up
already? If so, I'll change it ..

> 
> I also do not think that smp_processor_id() is the right thing to do
> here. Since cpu_hw_events is per-cpu the cpu is already selected.

Yeah, I could not figure out how to get the cpu number from cpuc. Is
there a container_of kind of thing that I can do to get the cpu number
?

> 
> > +
> >  	return &nb->event_constraints[new];
> >  }
> >  
> > @@ -520,6 +575,7 @@ static struct event_constraint amd_f15_PMC3  = EVENT_CONSTRAINT(0, 0x08, 0);
> >  static struct event_constraint amd_f15_PMC30 = EVENT_CONSTRAINT_OVERLAP(0, 0x09, 0);
> >  static struct event_constraint amd_f15_PMC50 = EVENT_CONSTRAINT(0, 0x3F, 0);
> >  static struct event_constraint amd_f15_PMC53 = EVENT_CONSTRAINT(0, 0x38, 0);
> > +static struct event_constraint amd_f15_NBPMC30 = EVENT_CONSTRAINT(0, 0x3C0, 0);
> 
> The counter index mask depends on the number of core counters which is
> either 4 or 6 (depending on cpu_has_perfctr_core).
> 
> >  static int setup_event_constraints(void)
> >  {
> > -	if (boot_cpu_data.x86 >= 0x15)
> > +	if (boot_cpu_data.x86 == 0x15)
> >  		x86_pmu.get_event_constraints = amd_get_event_constraints_f15h;
> 
> Since this does not cover family 16h anymore, you also need to extend
> amd_get_event_ constraints() to setup nb counters with __amd_get_nb_
> event_constraints() if cpu_has_perfctr_nb is set.

Yes family 16h will be covered by a separate patch at a later date.

> 
> >  	return 0;
> >  }
> > @@ -655,6 +714,18 @@ static int setup_perfctr_core(void)
> >  	return 0;
> >  }
> >  
> > +static int setup_perfctr_nb(void)
> > +{
> > +	if (!cpu_has_perfctr_nb)
> > +		return -ENODEV;
> > +
> > +	x86_pmu.num_counters += AMD64_NUM_COUNTERS_NB;
> 
> You should add a nb counter mask here which is used for nb counters.
> 
> The mask can be either 0x3c0 or 0x0f0 depending on cpu_has_perfctr_
> core for later use, you will need it at various locations.
> 
> In general I also would try to write the code in a way that make
> further cpu_has_perfctr_nb lookups unnecessary. There are many tests
> of this your code.

Okay will spin V3 soon.

> 
> -Robert
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/