Re: [PATCH] staging: ste_rmi4: Convert to Type-B support
From: Henrik Rydberg
Date: Wed Oct 31 2012 - 14:38:48 EST
Hi Alexandra,
> From: Alexandra Chin <alexandra.chin@xxxxxxxxxxxxxxxx>
> Date: Wed, 31 Oct 2012 16:21:12 +0800
> Subject: [PATCH] staging: ste_rmi4: Convert to Type-B support
>
> This patch:
> - Convert to MT-B because Synaptics touch devices are capable of
> tracking identifiable fingers
> - Modify maximum supported fingers up to 10
> - Set INPUT_PROP_POINTER for direct input devices
Thanks for the patch, looks good overall. Please find some comments
below. Also, the patch looks word-damaged, possibly mail client
problems.
> diff --git a/drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c b/drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c
> index 11728a0..e69ca5ee1 100644
> --- a/drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c
> +++ b/drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c
> @@ -31,6 +31,7 @@
> #include <linux/interrupt.h>
> #include <linux/regulator/consumer.h>
> #include <linux/module.h>
> +#include <linux/input/mt.h>
> #include "synaptics_i2c_rmi4.h"
>
> /* TODO: for multiple device support will need a per-device mutex */
> @@ -67,7 +68,7 @@
> #define PDT_START_SCAN_LOCATION (0x00E9)
> #define PDT_END_SCAN_LOCATION (0x000A)
> #define PDT_ENTRY_SIZE (0x0006)
> -#define RMI4_NUMBER_OF_MAX_FINGERS (8)
> +#define RMI4_NUMBER_OF_MAX_FINGERS (10)
It seems this define can be dropped altogether.
> #define SYNAPTICS_RMI4_TOUCHPAD_FUNC_NUM (0x11)
> #define SYNAPTICS_RMI4_DEVICE_CONTROL_FUNC_NUM (0x01)
>
> @@ -164,6 +165,8 @@ struct synaptics_rmi4_device_info {
> * @regulator: pointer to the regulator structure
> * @wait: wait queue structure variable
> * @touch_stopped: flag to stop the thread function
> + * @finger_state: previous state of fingers
> + * @fingers_supported: maximum supported fingers
> *
> * This structure gives the device data information.
> */
> @@ -184,6 +187,8 @@ struct synaptics_rmi4_data {
> struct regulator *regulator;
> wait_queue_head_t wait;
> bool touch_stopped;
> + unsigned char finger_state[RMI4_NUMBER_OF_MAX_FINGERS];
The finger state is not needed with MT-B.
> + unsigned char fingers_supported;
> };
>
> /**
> @@ -303,7 +308,6 @@ static int synpatics_rmi4_touchpad_report(struct synaptics_rmi4_data *pdata,
> /* number of touch points - fingers down in this case */
> int touch_count = 0;
> int finger;
> - int fingers_supported;
> int finger_registers;
> int reg;
> int finger_shift;
> @@ -314,10 +318,8 @@ static int synpatics_rmi4_touchpad_report(struct synaptics_rmi4_data *pdata,
> unsigned char data_reg_blk_size;
> unsigned char values[2];
> unsigned char data[DATA_LEN];
> - int x[RMI4_NUMBER_OF_MAX_FINGERS];
> - int y[RMI4_NUMBER_OF_MAX_FINGERS];
> - int wx[RMI4_NUMBER_OF_MAX_FINGERS];
> - int wy[RMI4_NUMBER_OF_MAX_FINGERS];
> + int x, y;
> + int wx, wy;
> struct i2c_client *client = pdata->i2c_client;
>
> /* get 2D sensor finger data */
> @@ -333,8 +335,7 @@ static int synpatics_rmi4_touchpad_report(struct synaptics_rmi4_data *pdata,
> * 10 = finger present but data may not be accurate,
> * 11 = reserved for product use.
> */
> - fingers_supported = rfi->num_of_data_points;
> - finger_registers = (fingers_supported + 3)/4;
> + finger_registers = (pdata->fingers_supported + 3)/4;
> data_base_addr = rfi->fn_desc.data_base_addr;
> retval = synaptics_rmi4_i2c_block_read(pdata, data_base_addr, values,
> finger_registers);
> @@ -348,17 +349,26 @@ static int synpatics_rmi4_touchpad_report(struct synaptics_rmi4_data *pdata,
> * to get absolute data.
> */
> data_reg_blk_size = rfi->size_of_data_register_block;
> - for (finger = 0; finger < fingers_supported; finger++) {
> + for (finger = 0; finger < pdata->fingers_supported; finger++) {
> /* determine which data byte the finger status is in */
> reg = finger/4;
> /* bit shift to get finger's status */
> finger_shift = (finger % 4) * 2;
> - finger_status = (values[reg] >> finger_shift) & 3;
> + finger_status = (values[reg] >> finger_shift) & MASK_2BIT;
> /*
> * if finger status indicates a finger is present then
> * read the finger data and report it
> */
> - if (finger_status == 1 || finger_status == 2) {
> + if (!finger_status && !pdata->finger_state[finger])
> + continue;
This can be dropped - the input core will only emit changes anyways.
> +
> + input_mt_slot(pdata->input_dev, finger);
> + input_mt_report_slot_state(pdata->input_dev,
> + MT_TOOL_FINGER, finger_status);
> +
> + if (!finger_status && pdata->finger_state[finger]) {
> + /* release event */
> + } else {
A "if (finger_status) {" will do here.
> /* Read the finger data */
> data_offset = data_base_addr +
> ((finger * data_reg_blk_size) +
> @@ -371,44 +381,30 @@ static int synpatics_rmi4_touchpad_report(struct synaptics_rmi4_data *pdata,
> __func__);
> return 0;
> } else {
> - x[touch_count] =
> - (data[0] << 4) | (data[2] & MASK_4BIT);
> - y[touch_count] =
> - (data[1] << 4) |
> - ((data[2] >> 4) & MASK_4BIT);
> - wy[touch_count] =
> - (data[3] >> 4) & MASK_4BIT;
> - wx[touch_count] =
> - (data[3] & MASK_4BIT);
> + x = (data[0] << 4) | (data[2] & MASK_4BIT);
> + y = (data[1] << 4)
> + | ((data[2] >> 4) & MASK_4BIT);
> + wy = (data[3] >> 4) & MASK_4BIT;
> + wx = (data[3] & MASK_4BIT);
>
> if (pdata->board->x_flip)
> - x[touch_count] =
> - pdata->sensor_max_x -
> - x[touch_count];
> + x = pdata->sensor_max_x - x;
> if (pdata->board->y_flip)
> - y[touch_count] =
> - pdata->sensor_max_y -
> - y[touch_count];
> + y = pdata->sensor_max_y - y;
> }
> + input_report_abs(pdata->input_dev, ABS_MT_TOUCH_MAJOR,
> + max(wx, wy));
> + input_report_abs(pdata->input_dev,
> + ABS_MT_POSITION_X, x);
> + input_report_abs(pdata->input_dev,
> + ABS_MT_POSITION_Y, y);
> +
A local variable for pdata->input_dev might clean up the wrapping here.
> /* number of active touch points */
> touch_count++;
> }
> + pdata->finger_state[finger] = finger_status;
Not necessary.
> }
>
> - /* report to input subsystem */
> - if (touch_count) {
> - for (finger = 0; finger < touch_count; finger++) {
> - input_report_abs(pdata->input_dev, ABS_MT_TOUCH_MAJOR,
> - max(wx[finger] , wy[finger]));
> - input_report_abs(pdata->input_dev, ABS_MT_POSITION_X,
> - x[finger]);
> - input_report_abs(pdata->input_dev, ABS_MT_POSITION_Y,
> - y[finger]);
> - input_mt_sync(pdata->input_dev);
> - }
> - } else
> - input_mt_sync(pdata->input_dev);
> -
> /* sync after groups of events */
> input_sync(pdata->input_dev);
> /* return the number of touch points */
> @@ -575,6 +571,7 @@ static int synpatics_rmi4_touchpad_detect(struct synaptics_rmi4_data *pdata,
> if ((queries[1] & MASK_3BIT) == 5)
> rfi->num_of_data_points = 10;
> }
> + pdata->fingers_supported = rfi->num_of_data_points;
> /* Need to get interrupt info for handling interrupts */
> rfi->index_to_intr_reg = (interruptcount + 7)/8;
> if (rfi->index_to_intr_reg != 0)
> @@ -981,13 +978,16 @@ static int __devinit synaptics_rmi4_probe
> set_bit(EV_SYN, rmi4_data->input_dev->evbit);
> set_bit(EV_KEY, rmi4_data->input_dev->evbit);
> set_bit(EV_ABS, rmi4_data->input_dev->evbit);
> -
> +#ifdef INPUT_PROP_DIRECT
> + set_bit(INPUT_PROP_DIRECT, rmi4_data->input_dev->propbit);
> +#endif
> input_set_abs_params(rmi4_data->input_dev, ABS_MT_POSITION_X, 0,
> rmi4_data->sensor_max_x, 0, 0);
> input_set_abs_params(rmi4_data->input_dev, ABS_MT_POSITION_Y, 0,
> rmi4_data->sensor_max_y, 0, 0);
> input_set_abs_params(rmi4_data->input_dev, ABS_MT_TOUCH_MAJOR, 0,
> MAX_TOUCH_MAJOR, 0, 0);
> + input_mt_init_slots(rmi4_data->input_dev, rmi4_data->fingers_supported);
Looks like your patch is against a slightly old kernel version;
Please send patches against 3.7-rcX.
>
> /* Clear interrupts */
> synaptics_rmi4_i2c_block_read(rmi4_data,
> --
> 1.7.5.4
>
Thanks!
Henrik
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/