[PATCH 2/2] therma: exynos: Supports thermal tripping

From: Jonghwan Choi
Date: Tue Oct 30 2012 - 01:32:51 EST


TMU urgently sends active-high signal (thermal trip) to PMU,
and thermal tripping by hardware logic i.e PMU is performed.
Thermal tripping means that PMU cut off the whole power of SoC
by controlling external voltage regulator.

Signed-off-by: Jonghwan Choi <jhbird.choi@xxxxxxxxxxx>
---
drivers/thermal/exynos_thermal.c | 7 ++++++-
include/linux/platform_data/exynos_thermal.h | 4 ++++
2 files changed, 10 insertions(+), 1 deletions(-)

diff --git a/drivers/thermal/exynos_thermal.c
b/drivers/thermal/exynos_thermal.c
index 6ce6667..edac601 100644
--- a/drivers/thermal/exynos_thermal.c
+++ b/drivers/thermal/exynos_thermal.c
@@ -53,6 +53,7 @@
#define EXYNOS_TMU_TRIM_TEMP_MASK 0xff
#define EXYNOS_TMU_GAIN_SHIFT 8
#define EXYNOS_TMU_REF_VOLTAGE_SHIFT 24
+#define EXYNOS_TMU_TRIP_EN BIT(12)
#define EXYNOS_TMU_CORE_ON 1
#define EXYNOS_TMU_CORE_OFF 0
#define EXYNOS_TMU_DEF_CODE_TO_TEMP_OFFSET 50
@@ -656,6 +657,8 @@ static void exynos_tmu_control(struct platform_device
*pdev, bool on)
if (data->soc == SOC_ARCH_EXYNOS) {
con |= pdata->noise_cancel_mode <<
EXYNOS_TMU_TRIP_MODE_SHIFT;
con |= (EXYNOS_MUX_ADDR_VALUE << EXYNOS_MUX_ADDR_SHIFT);
+ if (pdata->trip_en)
+ con |= EXYNOS_THERMAL_TRIP_EN;
}

if (on) {
@@ -762,10 +765,12 @@ static struct exynos_tmu_platform_data const
exynos_default_tmu_data = {
.trigger_levels[0] = 85,
.trigger_levels[1] = 103,
.trigger_levels[2] = 110,
+ .trigger_levels[3] = 120,
.trigger_level0_en = 1,
.trigger_level1_en = 1,
.trigger_level2_en = 1,
- .trigger_level3_en = 0,
+ .trigger_level3_en = 1,
+ .trip_en = 1,
.gain = 8,
.reference_voltage = 16,
.noise_cancel_mode = 4,
diff --git a/include/linux/platform_data/exynos_thermal.h
b/include/linux/platform_data/exynos_thermal.h
index a7bdb2f..9e44aac 100644
--- a/include/linux/platform_data/exynos_thermal.h
+++ b/include/linux/platform_data/exynos_thermal.h
@@ -79,6 +79,9 @@ struct freq_clip_table {
* @trigger_level3_en:
* 1 = enable trigger_level3 interrupt,
* 0 = disable trigger_level3 interrupt
+ * @trip_en:
+ * 1 = enable thermal tripping
+ * 0 = disable thermal tripping
* @gain: gain of amplifier in the positive-TC generator block
* 0 <= gain <= 15
* @reference_voltage: reference voltage of amplifier
@@ -102,6 +105,7 @@ struct exynos_tmu_platform_data {
bool trigger_level1_en;
bool trigger_level2_en;
bool trigger_level3_en;
+ bool trip_en;

u8 gain;
u8 reference_voltage;
--
1.7.4.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/