Re: [PATCH 1/2] ARM: dt: tegra: Add sdhci regulators

[Marc Dietrich]

Pavan,

On Tuesday 23 October 2012 12:48:59 Pavan Kunapuli wrote:
> Adding vmmc and vmmcq supplies for sdhci nodes
> in tegra dt files.

<...>

> diff --git a/arch/arm/boot/dts/tegra20-paz00.dts
> b/arch/arm/boot/dts/tegra20-paz00.dts index 6a93d14..e161b65 100644
> --- a/arch/arm/boot/dts/tegra20-paz00.dts
> +++ b/arch/arm/boot/dts/tegra20-paz00.dts
> @@ -422,13 +422,17 @@
>  		status = "okay";
>  		cd-gpios = <&gpio 173 0>; /* gpio PV5 */
>  		wp-gpios = <&gpio 57 0>;  /* gpio PH1 */
> -		power-gpios = <&gpio 169 0>; /* gpio PV1 */
>  		bus-width = <4>;
> +		vmmc-supply = <&vddio_sd_reg>;
> +		vqmmc-supply = <&vddio_sd_reg>;
>  	};
> 
>  	sdhci@c8000600 {
>  		status = "okay";
>  		bus-width = <8>;
> +		vmmc-supply = <&vddio_sdmmc_reg>;
> +		vqmmc-supply = <&vddio_sdmmc_reg>;

to make it better, this should be:

vmmc-supply = <&vcore_mmc_reg>; and
vqmmc-supply = <&vddio_nand_reg>;

with vcore_mmc_reg is ldo5 and vddio_nand_reg is the fixed regulator below.

By doing so, I get "sdhci-tegra sdhci-tegra.3: could not set regulator OCR 
(-1)". MMC subsys wants to set ldo5 to 3.3V but it is fixed. I guess that's 
harmless for now. 

>  	};
> 
>  	gpio-keys {
> @@ -465,6 +469,24 @@
>  			regulator-max-microvolt = <5000000>;
>  			regulator-always-on;
>  		};
> +
> +		vddio_sd_reg: regulator@1 {
> +			compatible = "regulator-fixed";
> +			reg = <1>;
> +			regulator-name = "vddio_sd";
> +			regulator-min-microvolt = <3300000>;
> +			regulator-max-microvolt = <3300000>;
> +			enable-active-high;
> +			gpio = <&gpio 169 0>; /* gpio PV1 */
> +		};
> +
> +		vddio_sdmmc_reg: regulator@2 {

       ^^ vddio_nand_reg acording to schematics

> +			compatible = "regulator-fixed";
> +			reg = <2>;
> +			regulator-name  = "vddio_sdmmc";

also here

> +			regulator-min-microvolt = <3300000>;
> +			regulator-max-microvolt = <3300000>;
> +		};
>  	};
> 
>  	sound {

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/