[PATCH v7 2/3] pwm_backlight: use power sequences
From: Alexandre Courbot
Date: Fri Oct 19 2012 - 05:05:43 EST
Make use of the power sequences specified in the device tree or platform
data to control how the backlight is powered on and off.
Signed-off-by: Alexandre Courbot <acourbot@xxxxxxxxxx>
---
.../bindings/video/backlight/pwm-backlight.txt | 72 ++++++++-
drivers/video/backlight/Kconfig | 1 +
drivers/video/backlight/pwm_bl.c | 161 ++++++++++++++++-----
include/linux/pwm_backlight.h | 18 ++-
4 files changed, 213 insertions(+), 39 deletions(-)
diff --git a/Documentation/devicetree/bindings/video/backlight/pwm-backlight.txt b/Documentation/devicetree/bindings/video/backlight/pwm-backlight.txt
index 1e4fc72..3ba25ea 100644
--- a/Documentation/devicetree/bindings/video/backlight/pwm-backlight.txt
+++ b/Documentation/devicetree/bindings/video/backlight/pwm-backlight.txt
@@ -14,15 +14,83 @@ Required properties:
Optional properties:
- pwm-names: a list of names for the PWM devices specified in the
"pwms" property (see PWM binding[0])
+ - low-threshold-brightness: brightness threshold low level. Sets the lowest
+ brightness value.
+ On some panels the backlight misbehaves if the duty cycle percentage of the
+ PWM wave is less than a certain level (say 20%). In this example the user
+ can set low-threshold-brightness to a value above 50 (ie, 20% of 255), thus
+ preventing the PWM duty cycle from going too low.
+ On setting low-threshold-brightness the range of brightness levels is
+ calculated in the range low-threshold-brightness to the maximum value in
+ brightness-levels, described above.
+ - pwm-names: name for the PWM device specified in the "pwms" property (see PWM
+ binding[0]). Necessary if power sequences are used
+ - power-sequences: Power sequences (see Power sequences[1]) used to bring the
+ backlight on and off. If this property is present, then two power
+ sequences named "power-on" and "power-off" must be defined to control how
+ the backlight is to be powered on and off. These sequences must reference
+ the PWM specified in the pwms property by its name, and can also reference
+ other resources supported by the power sequences mechanism
[0]: Documentation/devicetree/bindings/pwm/pwm.txt
+[1]: Documentation/devicetree/bindings/power/power_seq.txt
Example:
backlight {
compatible = "pwm-backlight";
- pwms = <&pwm 0 5000000>;
-
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
+ low-threshold-brightness = <50>;
+
+ /* resources used by the power sequences */
+ pwms = <&pwm 0 5000000>;
+ pwm-names = "backlight";
+ power-supply = <&backlight_reg>;
+
+ power-sequences {
+ power-on {
+ step0 {
+ type = "regulator";
+ id = "power";
+ enable;
+ };
+ step1 {
+ type = "delay";
+ delay = <10000>;
+ };
+ step2 {
+ type = "pwm";
+ id = "backlight";
+ enable;
+ };
+ step3 {
+ type = "gpio";
+ gpio = <&gpio 28 0>;
+ value = <1>;
+ };
+ };
+
+ power-off {
+ step0 {
+ type = "gpio";
+ gpio = <&gpio 28 0>;
+ value = <0>;
+ };
+ step1 {
+ type = "pwm";
+ id = "backlight";
+ disable;
+ };
+ step2 {
+ type = "delay";
+ delay = <10000>;
+ };
+ step3 {
+ type = "regulator";
+ id = "power";
+ disable;
+ };
+ };
+ };
};
diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index c101697..c2e5f79 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -239,6 +239,7 @@ config BACKLIGHT_CARILLO_RANCH
config BACKLIGHT_PWM
tristate "Generic PWM based Backlight Driver"
depends on PWM
+ select POWER_SEQ
help
If you have a LCD backlight adjustable by PWM, say Y to enable
this driver.
diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c
index 069983c..e607c6e 100644
--- a/drivers/video/backlight/pwm_bl.c
+++ b/drivers/video/backlight/pwm_bl.c
@@ -27,6 +27,12 @@ struct pwm_bl_data {
unsigned int period;
unsigned int lth_brightness;
unsigned int *levels;
+ bool enabled;
+ struct power_seq_set power_seqs;
+ struct power_seq *power_on_seq;
+ struct power_seq *power_off_seq;
+
+ /* Legacy callbacks */
int (*notify)(struct device *,
int brightness);
void (*notify_after)(struct device *,
@@ -35,6 +41,52 @@ struct pwm_bl_data {
void (*exit)(struct device *);
};
+static void pwm_backlight_on(struct backlight_device *bl)
+{
+ struct pwm_bl_data *pb = dev_get_drvdata(&bl->dev);
+ int ret;
+
+ if (pb->enabled)
+ return;
+
+ if (pb->power_on_seq) {
+ ret = power_seq_run(pb->power_on_seq);
+ if (ret < 0) {
+ dev_err(&bl->dev, "cannot run power on sequence\n");
+ return;
+ }
+ } else {
+ /* legacy framework */
+ pwm_config(pb->pwm, 0, pb->period);
+ pwm_disable(pb->pwm);
+ }
+
+ pb->enabled = true;
+}
+
+static void pwm_backlight_off(struct backlight_device *bl)
+{
+ struct pwm_bl_data *pb = dev_get_drvdata(&bl->dev);
+ int ret;
+
+ if (!pb->enabled)
+ return;
+
+ if (pb->power_off_seq) {
+ ret = power_seq_run(pb->power_off_seq);
+ if (ret < 0) {
+ dev_err(&bl->dev, "cannot run power off sequence\n");
+ return;
+ }
+ } else {
+ /* legacy framework */
+ pwm_enable(pb->pwm);
+ return;
+ }
+
+ pb->enabled = false;
+}
+
static int pwm_backlight_update_status(struct backlight_device *bl)
{
struct pwm_bl_data *pb = dev_get_drvdata(&bl->dev);
@@ -51,8 +103,7 @@ static int pwm_backlight_update_status(struct backlight_device *bl)
brightness = pb->notify(pb->dev, brightness);
if (brightness == 0) {
- pwm_config(pb->pwm, 0, pb->period);
- pwm_disable(pb->pwm);
+ pwm_backlight_off(bl);
} else {
int duty_cycle;
@@ -66,7 +117,7 @@ static int pwm_backlight_update_status(struct backlight_device *bl)
duty_cycle = pb->lth_brightness +
(duty_cycle * (pb->period - pb->lth_brightness) / max);
pwm_config(pb->pwm, duty_cycle, pb->period);
- pwm_enable(pb->pwm);
+ pwm_backlight_on(bl);
}
if (pb->notify_after)
@@ -145,11 +196,10 @@ static int pwm_backlight_parse_dt(struct device *dev,
data->max_brightness--;
}
- /*
- * TODO: Most users of this driver use a number of GPIOs to control
- * backlight power. Support for specifying these needs to be
- * added.
- */
+ /* read power sequences */
+ data->power_seqs = devm_of_parse_power_seq_set(dev);
+ if (IS_ERR(data->power_seqs))
+ return PTR_ERR(data->power_seqs);
return 0;
}
@@ -172,6 +222,7 @@ static int pwm_backlight_probe(struct platform_device *pdev)
{
struct platform_pwm_backlight_data *data = pdev->dev.platform_data;
struct platform_pwm_backlight_data defdata;
+ struct power_seq_resource *res;
struct backlight_properties props;
struct backlight_device *bl;
struct pwm_bl_data *pb;
@@ -180,7 +231,9 @@ static int pwm_backlight_probe(struct platform_device *pdev)
if (!data) {
ret = pwm_backlight_parse_dt(&pdev->dev, &defdata);
- if (ret < 0) {
+ if (ret == -EPROBE_DEFER) {
+ return ret;
+ } else if (ret < 0) {
dev_err(&pdev->dev, "failed to find platform data\n");
return ret;
}
@@ -201,6 +254,68 @@ static int pwm_backlight_probe(struct platform_device *pdev)
goto err_alloc;
}
+ if (data->power_seqs) {
+ /* use power sequences */
+ struct power_seq_set *seqs = &pb->power_seqs;
+
+ power_seq_set_init(seqs, &pdev->dev);
+ power_seq_set_add_sequences(seqs, data->power_seqs);
+
+ /* Check that the required sequences are here */
+ pb->power_on_seq = power_seq_lookup(seqs, "power-on");
+ if (!pb->power_on_seq) {
+ dev_err(&pdev->dev, "missing power-on sequence\n");
+ return -EINVAL;
+ }
+ pb->power_off_seq = power_seq_lookup(seqs, "power-off");
+ if (!pb->power_off_seq) {
+ dev_err(&pdev->dev, "missing power-off sequence\n");
+ return -EINVAL;
+ }
+
+ /* we must have exactly one PWM resource for this driver */
+ power_seq_for_each_resource(res, seqs) {
+ if (res->type != POWER_SEQ_PWM)
+ continue;
+ if (pb->pwm) {
+ dev_err(&pdev->dev, "more than one PWM used\n");
+ return -EINVAL;
+ }
+ /* keep the pwm at hand */
+ pb->pwm = res->pwm.pwm;
+ }
+ /* from here we should have a PWM */
+ if (!pb->pwm) {
+ dev_err(&pdev->dev, "no PWM defined!\n");
+ return -EINVAL;
+ }
+ } else {
+ /* use legacy interface */
+ pb->pwm = devm_pwm_get(&pdev->dev, NULL);
+ if (IS_ERR(pb->pwm)) {
+ dev_err(&pdev->dev,
+ "unable to request PWM, trying legacy API\n");
+
+ pb->pwm = pwm_request(data->pwm_id, "pwm-backlight");
+ if (IS_ERR(pb->pwm)) {
+ dev_err(&pdev->dev,
+ "unable to request legacy PWM\n");
+ ret = PTR_ERR(pb->pwm);
+ goto err_alloc;
+ }
+ }
+
+ dev_dbg(&pdev->dev, "got pwm for backlight\n");
+
+ /*
+ * The DT case will set the pwm_period_ns field to 0 and store
+ * the period, parsed from the DT, in the PWM device. For the
+ * non-DT case, set the period from platform data.
+ */
+ if (data->pwm_period_ns > 0)
+ pwm_set_period(pb->pwm, data->pwm_period_ns);
+ }
+
if (data->levels) {
max = data->levels[data->max_brightness];
pb->levels = data->levels;
@@ -213,28 +328,6 @@ static int pwm_backlight_probe(struct platform_device *pdev)
pb->exit = data->exit;
pb->dev = &pdev->dev;
- pb->pwm = devm_pwm_get(&pdev->dev, NULL);
- if (IS_ERR(pb->pwm)) {
- dev_err(&pdev->dev, "unable to request PWM, trying legacy API\n");
-
- pb->pwm = pwm_request(data->pwm_id, "pwm-backlight");
- if (IS_ERR(pb->pwm)) {
- dev_err(&pdev->dev, "unable to request legacy PWM\n");
- ret = PTR_ERR(pb->pwm);
- goto err_alloc;
- }
- }
-
- dev_dbg(&pdev->dev, "got pwm for backlight\n");
-
- /*
- * The DT case will set the pwm_period_ns field to 0 and store the
- * period, parsed from the DT, in the PWM device. For the non-DT case,
- * set the period from platform data.
- */
- if (data->pwm_period_ns > 0)
- pwm_set_period(pb->pwm, data->pwm_period_ns);
-
pb->period = pwm_get_period(pb->pwm);
pb->lth_brightness = data->lth_brightness * (pb->period / max);
@@ -267,8 +360,7 @@ static int pwm_backlight_remove(struct platform_device *pdev)
struct pwm_bl_data *pb = dev_get_drvdata(&bl->dev);
backlight_device_unregister(bl);
- pwm_config(pb->pwm, 0, pb->period);
- pwm_disable(pb->pwm);
+ pwm_backlight_off(bl);
if (pb->exit)
pb->exit(&pdev->dev);
return 0;
@@ -282,8 +374,7 @@ static int pwm_backlight_suspend(struct device *dev)
if (pb->notify)
pb->notify(pb->dev, 0);
- pwm_config(pb->pwm, 0, pb->period);
- pwm_disable(pb->pwm);
+ pwm_backlight_off(bl);
if (pb->notify_after)
pb->notify_after(pb->dev, 0);
return 0;
diff --git a/include/linux/pwm_backlight.h b/include/linux/pwm_backlight.h
index 56f4a86..0dcec1d 100644
--- a/include/linux/pwm_backlight.h
+++ b/include/linux/pwm_backlight.h
@@ -5,14 +5,28 @@
#define __LINUX_PWM_BACKLIGHT_H
#include <linux/backlight.h>
+#include <linux/power_seq.h>
struct platform_pwm_backlight_data {
- int pwm_id;
unsigned int max_brightness;
unsigned int dft_brightness;
unsigned int lth_brightness;
- unsigned int pwm_period_ns;
unsigned int *levels;
+ /*
+ * New interface using power sequences. Must include exactly
+ * two power sequences named 'power-on' and 'power-off'. If NULL,
+ * the legacy interface is used.
+ */
+ struct platform_power_seq_set *power_seqs;
+
+ /*
+ * Legacy interface - use power sequences instead!
+ *
+ * pwm_id and pwm_period_ns need only be specified
+ * if get_pwm(dev, NULL) would return NULL.
+ */
+ int pwm_id;
+ unsigned int pwm_period_ns;
int (*init)(struct device *dev);
int (*notify)(struct device *dev, int brightness);
void (*notify_after)(struct device *dev, int brightness);
--
1.7.12.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/