Re: [PATCH v5 1/2] x86, pci: Reset PCIe devices at boot time

From: Khalid Aziz
Date: Thu Oct 18 2012 - 11:32:35 EST


On Wed, 2012-10-17 at 15:23 +0900, Takao Indoh wrote:
> This patch resets PCIe devices at boot time by hot reset when
> "reset_devices" is specified.
>
> Signed-off-by: Takao Indoh <indou.takao@xxxxxxxxxxxxxx>
> ---
> arch/x86/include/asm/pci-direct.h | 1
> arch/x86/kernel/setup.c | 3
> arch/x86/pci/early.c | 353 ++++++++++++++++++++++++++++
> include/linux/pci.h | 2
> init/main.c | 4
> 5 files changed, 361 insertions(+), 2 deletions(-)
>
> diff --git a/arch/x86/include/asm/pci-direct.h b/arch/x86/include/asm/pci-direct.h
> index b1e7a45..de30db2 100644
> --- a/arch/x86/include/asm/pci-direct.h
> +++ b/arch/x86/include/asm/pci-direct.h
> @@ -18,4 +18,5 @@ extern int early_pci_allowed(void);
> extern unsigned int pci_early_dump_regs;
> extern void early_dump_pci_device(u8 bus, u8 slot, u8 func);
> extern void early_dump_pci_devices(void);
> +extern void early_reset_pcie_devices(void);
> #endif /* _ASM_X86_PCI_DIRECT_H */
> diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
> index a2bb18e..73d3425 100644
> --- a/arch/x86/kernel/setup.c
> +++ b/arch/x86/kernel/setup.c
> @@ -987,6 +987,9 @@ void __init setup_arch(char **cmdline_p)
> generic_apic_probe();
>
> early_quirks();
> +#ifdef CONFIG_PCI
> + early_reset_pcie_devices();
> +#endif
>
> /*
> * Read APIC and some other early information from ACPI tables.
> diff --git a/arch/x86/pci/early.c b/arch/x86/pci/early.c
> index d1067d5..df7f4fc 100644
> --- a/arch/x86/pci/early.c
> +++ b/arch/x86/pci/early.c
> @@ -1,5 +1,6 @@
> #include <linux/kernel.h>
> #include <linux/pci.h>
> +#include <linux/bootmem.h>
> #include <asm/pci-direct.h>
> #include <asm/io.h>
> #include <asm/pci_x86.h>
> @@ -109,3 +110,355 @@ void early_dump_pci_devices(void)
> }
> }
> }
> +
> +#define PCI_EXP_SAVE_REGS 7
> +#define pcie_cap_has_devctl(type, flags) 1
> +#define pcie_cap_has_lnkctl(type, flags) \
> + ((flags & PCI_EXP_FLAGS_VERS) > 1 || \
> + (type == PCI_EXP_TYPE_ROOT_PORT || \
> + type == PCI_EXP_TYPE_ENDPOINT || \
> + type == PCI_EXP_TYPE_LEG_END))
> +#define pcie_cap_has_sltctl(type, flags) \
> + ((flags & PCI_EXP_FLAGS_VERS) > 1 || \
> + ((type == PCI_EXP_TYPE_ROOT_PORT) || \
> + (type == PCI_EXP_TYPE_DOWNSTREAM && \
> + (flags & PCI_EXP_FLAGS_SLOT))))
> +#define pcie_cap_has_rtctl(type, flags) \
> + ((flags & PCI_EXP_FLAGS_VERS) > 1 || \
> + (type == PCI_EXP_TYPE_ROOT_PORT || \
> + type == PCI_EXP_TYPE_RC_EC))
> +
> +struct save_config {
> + u32 pci[16];
> + u16 pcie[PCI_EXP_SAVE_REGS];
> +};
> +
> +struct pcie_dev {
> + int cap; /* position of PCI Express capability */
> + int flags; /* PCI_EXP_FLAGS */
> + struct save_config save; /* saved configration register */
> +};
> +
> +struct pcie_port {
> + struct list_head dev;
> + u8 bus;
> + u8 slot;
> + u8 func;
> + u8 secondary;
> + struct pcie_dev child[PCI_MAX_FUNCTIONS];
> +};
> +
> +static LIST_HEAD(device_list);
> +static void __init pci_udelay(int loops)
> +{
> + while (loops--) {
> + /* Approximately 1 us */
> + native_io_delay();
> + }
> +}
> +
> +/* Derived from drivers/pci/pci.c */
> +#define PCI_FIND_CAP_TTL 48
> +static int __init __pci_find_next_cap_ttl(u8 bus, u8 slot, u8 func,
> + u8 pos, int cap, int *ttl)
> +{
> + u8 id;
> +
> + while ((*ttl)--) {
> + pos = read_pci_config_byte(bus, slot, func, pos);
> + if (pos < 0x40)
> + break;
> + pos &= ~3;
> + id = read_pci_config_byte(bus, slot, func,
> + pos + PCI_CAP_LIST_ID);
> + if (id == 0xff)
> + break;
> + if (id == cap)
> + return pos;
> + pos += PCI_CAP_LIST_NEXT;
> + }
> + return 0;
> +}
> +
> +static int __init __pci_find_next_cap(u8 bus, u8 slot, u8 func, u8 pos, int cap)
> +{
> + int ttl = PCI_FIND_CAP_TTL;
> +
> + return __pci_find_next_cap_ttl(bus, slot, func, pos, cap, &ttl);
> +}
> +
> +static int __init __pci_bus_find_cap_start(u8 bus, u8 slot, u8 func,
> + u8 hdr_type)
> +{
> + u16 status;
> +
> + status = read_pci_config_16(bus, slot, func, PCI_STATUS);
> + if (!(status & PCI_STATUS_CAP_LIST))
> + return 0;
> +
> + switch (hdr_type) {
> + case PCI_HEADER_TYPE_NORMAL:
> + case PCI_HEADER_TYPE_BRIDGE:
> + return PCI_CAPABILITY_LIST;
> + case PCI_HEADER_TYPE_CARDBUS:
> + return PCI_CB_CAPABILITY_LIST;
> + default:
> + return 0;
> + }
> +
> + return 0;
> +}
> +
> +static int __init early_pci_find_capability(u8 bus, u8 slot, u8 func, int cap)
> +{
> + int pos;
> + u8 type = read_pci_config_byte(bus, slot, func, PCI_HEADER_TYPE);
> +
> + pos = __pci_bus_find_cap_start(bus, slot, func, type & 0x7f);
> + if (pos)
> + pos = __pci_find_next_cap(bus, slot, func, pos, cap);
> +
> + return pos;
> +}
> +
> +static void __init do_reset(u8 bus, u8 slot, u8 func)
> +{
> + u16 ctrl;
> +
> + printk(KERN_INFO "pci 0000:%02x:%02x.%d reset\n", bus, slot, func);
> +
> + /* Assert Secondary Bus Reset */
> + ctrl = read_pci_config_16(bus, slot, func, PCI_BRIDGE_CONTROL);
> + ctrl |= PCI_BRIDGE_CTL_BUS_RESET;
> + write_pci_config_16(bus, slot, func, PCI_BRIDGE_CONTROL, ctrl);
> +
> + /*
> + * PCIe spec requires software to ensure a minimum reset duration
> + * (Trst == 1ms). We have here 5ms safety margin because pci_udelay is
> + * not precise.
> + */
> + pci_udelay(5000);
> +
> + /* De-assert Secondary Bus Reset */
> + ctrl &= ~PCI_BRIDGE_CTL_BUS_RESET;
> + write_pci_config_16(bus, slot, func, PCI_BRIDGE_CONTROL, ctrl);
> +}
> +
> +static void __init save_state(unsigned bus, unsigned slot, unsigned func,
> + struct pcie_dev *dev)
> +{
> + int i;
> + int pcie, flags, pcie_type;
> + struct save_config *save;
> +
> + pcie = dev->cap;
> + flags = dev->flags;
> + pcie_type = (flags & PCI_EXP_FLAGS_TYPE) >> 4;
> + save = &dev->save;
> +
> + printk(KERN_INFO "pci 0000:%02x:%02x.%d save state\n", bus, slot, func);
> +
> + for (i = 0; i < 16; i++)
> + save->pci[i] = read_pci_config(bus, slot, func, i * 4);
> + i = 0;
> + if (pcie_cap_has_devctl(pcie_type, flags))
> + save->pcie[i++] = read_pci_config_16(bus, slot, func,
> + pcie + PCI_EXP_DEVCTL);
> + if (pcie_cap_has_lnkctl(pcie_type, flags))
> + save->pcie[i++] = read_pci_config_16(bus, slot, func,
> + pcie + PCI_EXP_LNKCTL);
> + if (pcie_cap_has_sltctl(pcie_type, flags))
> + save->pcie[i++] = read_pci_config_16(bus, slot, func,
> + pcie + PCI_EXP_SLTCTL);
> + if (pcie_cap_has_rtctl(pcie_type, flags))
> + save->pcie[i++] = read_pci_config_16(bus, slot, func,
> + pcie + PCI_EXP_RTCTL);
> +
> + if ((flags & PCI_EXP_FLAGS_VERS) >= 2) {
> + save->pcie[i++] = read_pci_config_16(bus, slot, func,
> + pcie + PCI_EXP_DEVCTL2);
> + save->pcie[i++] = read_pci_config_16(bus, slot, func,
> + pcie + PCI_EXP_LNKCTL2);
> + save->pcie[i++] = read_pci_config_16(bus, slot, func,
> + pcie + PCI_EXP_SLTCTL2);
> + }
> +}
> +
> +static void __init restore_state(unsigned bus, unsigned slot, unsigned func,
> + struct pcie_dev *dev)
> +{
> + int i = 0;
> + int pcie, flags, pcie_type;
> + struct save_config *save;
> +
> + pcie = dev->cap;
> + flags = dev->flags;
> + pcie_type = (flags & PCI_EXP_FLAGS_TYPE) >> 4;
> + save = &dev->save;
> +
> + printk(KERN_INFO "pci 0000:%02x:%02x.%d restore state\n",
> + bus, slot, func);
> +
> + if (pcie_cap_has_devctl(pcie_type, flags))
> + write_pci_config_16(bus, slot, func,
> + pcie + PCI_EXP_DEVCTL, save->pcie[i++]);
> + if (pcie_cap_has_lnkctl(pcie_type, flags))
> + write_pci_config_16(bus, slot, func,
> + pcie + PCI_EXP_LNKCTL, save->pcie[i++]);
> + if (pcie_cap_has_sltctl(pcie_type, flags))
> + write_pci_config_16(bus, slot, func,
> + pcie + PCI_EXP_SLTCTL, save->pcie[i++]);
> + if (pcie_cap_has_rtctl(pcie_type, flags))
> + write_pci_config_16(bus, slot, func,
> + pcie + PCI_EXP_RTCTL, save->pcie[i++]);
> +
> + if ((flags & PCI_EXP_FLAGS_VERS) >= 2) {
> + write_pci_config_16(bus, slot, func,
> + pcie + PCI_EXP_DEVCTL2, save->pcie[i++]);
> + write_pci_config_16(bus, slot, func,
> + pcie + PCI_EXP_LNKCTL2, save->pcie[i++]);
> + write_pci_config_16(bus, slot, func,
> + pcie + PCI_EXP_SLTCTL2, save->pcie[i++]);
> + }
> +
> + for (i = 15; i >= 0; i--)
> + write_pci_config(bus, slot, func, i * 4, save->pci[i]);
> +}
> +
> +static void __init find_pcie_device(unsigned bus, unsigned slot, unsigned func)
> +{
> + int f, count;
> + int pcie, pcie_type;
> + u8 type;
> + u16 vendor, flags;
> + u32 class;
> + int secondary;
> + struct pcie_port *port;
> + int pcie_cap[PCI_MAX_FUNCTIONS];
> + int pcie_flags[PCI_MAX_FUNCTIONS];
> +
> + pcie = early_pci_find_capability(bus, slot, func, PCI_CAP_ID_EXP);
> + if (!pcie)
> + return;
> +
> + flags = read_pci_config_16(bus, slot, func, pcie + PCI_EXP_FLAGS);
> + pcie_type = (flags & PCI_EXP_FLAGS_TYPE) >> 4;
> + if ((pcie_type != PCI_EXP_TYPE_ROOT_PORT) &&
> + (pcie_type != PCI_EXP_TYPE_DOWNSTREAM))
> + return;
> +
> + type = read_pci_config_byte(bus, slot, func, PCI_HEADER_TYPE);
> + if ((type & 0x7f) != PCI_HEADER_TYPE_BRIDGE)
> + return;
> + secondary = read_pci_config_byte(bus, slot, func, PCI_SECONDARY_BUS);
> +
> + memset(pcie_cap, 0, sizeof(pcie_cap));
> + memset(pcie_flags, 0, sizeof(pcie_flags));
> + for (count = 0, f = 0; f < PCI_MAX_FUNCTIONS; f++) {
> + vendor = read_pci_config_16(secondary, 0, f, PCI_VENDOR_ID);
> + if (vendor == 0xffff)
> + continue;
> +
> + pcie = early_pci_find_capability(secondary, 0, f,
> + PCI_CAP_ID_EXP);
> + if (!pcie)
> + continue;
> +
> + flags = read_pci_config_16(secondary, 0, f,
> + pcie + PCI_EXP_FLAGS);
> + pcie_type = (flags & PCI_EXP_FLAGS_TYPE) >> 4;
> + if ((pcie_type == PCI_EXP_TYPE_UPSTREAM) ||
> + (pcie_type == PCI_EXP_TYPE_PCI_BRIDGE))
> + /* Don't reset switch, bridge */
> + return;
> +
> + class = read_pci_config(secondary, 0, f, PCI_CLASS_REVISION);
> + if ((class >> 24) == PCI_BASE_CLASS_DISPLAY)
> + /* Don't reset VGA device */
> + return;
> +
> + count++;
> + pcie_cap[f] = pcie;
> + pcie_flags[f] = flags;
> + }
> +
> + if (!count)
> + return;
> +
> + port = (struct pcie_port *)alloc_bootmem(sizeof(struct pcie_port));
> + if (port == NULL) {
> + printk(KERN_ERR "pci 0000:%02x:%02x.%d alloc_bootmem failed\n",
> + bus, slot, func);
> + return;
> + }
> + memset(port, 0, sizeof(*port));
> + port->bus = bus;
> + port->slot = slot;
> + port->func = func;
> + port->secondary = secondary;
> + for (f = 0; f < PCI_MAX_FUNCTIONS; f++) {
> + if (pcie_cap[f] != 0) {
> + port->child[f].cap = pcie_cap[f];
> + port->child[f].flags = pcie_flags[f];
> + save_state(secondary, 0, f, &port->child[f]);
> + }
> + }
> + list_add_tail(&port->dev, &device_list);
> +}
> +
> +void __init early_reset_pcie_devices(void)
> +{
> + unsigned bus, slot, func;
> + struct pcie_port *port, *tmp;
> +
> + if (!early_pci_allowed() || !reset_devices)
> + return;
> +
> + /* Find PCIe port and save config registers of its downstream devices */
> + for (bus = 0; bus < 256; bus++) {
> + for (slot = 0; slot < 32; slot++) {
> + for (func = 0; func < PCI_MAX_FUNCTIONS; func++) {
> + u16 vendor;
> + u8 type;
> + vendor = read_pci_config_16(bus, slot, func,
> + PCI_VENDOR_ID);
> +
> + if (vendor == 0xffff)
> + continue;
> +
> + find_pcie_device(bus, slot, func);
> +
> + if (func == 0) {
> + type = read_pci_config_byte(bus, slot,
> + func,
> + PCI_HEADER_TYPE);
> + if (!(type & 0x80))
> + break;
> + }
> + }
> + }
> + }
> +
> + if (list_empty(&device_list))
> + return;
> +
> + /* Do bus reset */
> + list_for_each_entry(port, &device_list, dev)
> + do_reset(port->bus, port->slot, port->func);
> +
> + /*
> + * According to PCIe spec, software must wait a minimum of 100 ms
> + * before sending a configuration request. We have 500ms safety margin
> + * here.
> + */
> + pci_udelay(500000);
> +
> + /* Restore config registers and free memory */
> + list_for_each_entry_safe(port, tmp, &device_list, dev) {
> + for (func = 0; func < PCI_MAX_FUNCTIONS; func++)
> + if (port->child[func].cap)
> + restore_state(port->secondary, 0, func,
> + &port->child[func]);
> + free_bootmem(__pa(port), sizeof(*port));
> + }
> +}
> diff --git a/include/linux/pci.h b/include/linux/pci.h
> index ee21795..eca3231 100644
> --- a/include/linux/pci.h
> +++ b/include/linux/pci.h
> @@ -35,6 +35,8 @@
> /* Include the ID list */
> #include <linux/pci_ids.h>
>
> +#define PCI_MAX_FUNCTIONS 8
> +
> /* pci_slot represents a physical slot */
> struct pci_slot {
> struct pci_bus *bus; /* The bus this slot is on */
> diff --git a/init/main.c b/init/main.c
> index 9cf77ab..0eb7430 100644
> --- a/init/main.c
> +++ b/init/main.c
> @@ -144,10 +144,10 @@ EXPORT_SYMBOL(reset_devices);
> static int __init set_reset_devices(char *str)
> {
> reset_devices = 1;
> - return 1;
> + return 0;
> }
>
> -__setup("reset_devices", set_reset_devices);
> +early_param("reset_devices", set_reset_devices);
>
> static const char * argv_init[MAX_INIT_ARGS+2] = { "init", NULL, };
> const char * envp_init[MAX_INIT_ENVS+2] = { "HOME=/", "TERM=linux", NULL, };
>
>
> _______________________________________________
> kexec mailing list
> kexec@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/kexec

This looks good. Good catch on access to downstream devices after reset.
It is certainly safer to save all config registers before any resets.

One thing I am concerned about is would a reset affect SR-IOV extended
capability registers. If so, should save_state() save those registers as
well? Alex Williamson (cc'd) can possibly comment on that aspect.

--
Khalid

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/