[PATCH 1/3] pinctrl/coh901: use irqdomain, allocate irqdescs

[Linus Walleij]

From: Linus Walleij <linus.walleij@xxxxxxxxxx>

This switches the COH 901 pinctrl driver to allocate its GPIO
IRQs dynamically, and start to use a linear irqdomain to map
from the hardware IRQs.

This way we can cut away the complex allocation of IRQ numbers
from the <mach/irqs.h> file.

Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
---
 arch/arm/mach-u300/core.c                    |  1 -
 arch/arm/mach-u300/include/mach/irqs.h       | 10 -----
 drivers/pinctrl/pinctrl-coh901.c             | 60 +++++++++++++++++++++-------
 include/linux/platform_data/pinctrl-coh901.h |  2 -
 4 files changed, 46 insertions(+), 27 deletions(-)

diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index 603c08e..ce2de0d 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -1445,7 +1445,6 @@ static struct platform_device pinctrl_device = {
 static struct u300_gpio_platform u300_gpio_plat = {
 	.ports = 7,
 	.gpio_base = 0,
-	.gpio_irq_base = IRQ_U300_GPIO_BASE,
 	.pinctrl_device = &pinctrl_device,
 };
 
diff --git a/arch/arm/mach-u300/include/mach/irqs.h b/arch/arm/mach-u300/include/mach/irqs.h
index e85ec38..21d5e76 100644
--- a/arch/arm/mach-u300/include/mach/irqs.h
+++ b/arch/arm/mach-u300/include/mach/irqs.h
@@ -77,14 +77,4 @@
 #define IRQ_U300_GPIO_PORT6		87
 #define U300_VIC_IRQS_END		88
 
-/* Maximum 8*7 GPIO lines */
-#ifdef CONFIG_PINCTRL_COH901
-#define IRQ_U300_GPIO_BASE		(U300_VIC_IRQS_END)
-#define IRQ_U300_GPIO_END		(IRQ_U300_GPIO_BASE + 56)
-#else
-#define IRQ_U300_GPIO_END		(U300_VIC_IRQS_END)
-#endif
-
-#define NR_IRQS_U300			(IRQ_U300_GPIO_END - IRQ_U300_INTCON0_START)
-
 #endif
diff --git a/drivers/pinctrl/pinctrl-coh901.c b/drivers/pinctrl/pinctrl-coh901.c
index b446c96..152efae 100644
--- a/drivers/pinctrl/pinctrl-coh901.c
+++ b/drivers/pinctrl/pinctrl-coh901.c
@@ -13,6 +13,7 @@
 #include <linux/delay.h>
 #include <linux/errno.h>
 #include <linux/io.h>
+#include <linux/irqdomain.h>
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/platform_device.h>
@@ -67,7 +68,6 @@ struct u300_gpio {
 	struct resource *memres;
 	void __iomem *base;
 	struct device *dev;
-	int irq_base;
 	u32 stride;
 	/* Register offsets */
 	u32 pcr;
@@ -83,6 +83,7 @@ struct u300_gpio_port {
 	struct list_head node;
 	struct u300_gpio *gpio;
 	char name[8];
+	struct irq_domain *domain;
 	int irq;
 	int number;
 	u8 toggle_edge_mode;
@@ -314,10 +315,30 @@ static int u300_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
 static int u300_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
 {
 	struct u300_gpio *gpio = to_u300_gpio(chip);
-	int retirq = gpio->irq_base + offset;
+	int portno = offset >> 3;
+	struct u300_gpio_port *port = NULL;
+	struct list_head *p;
+	int retirq;
 
-	dev_dbg(gpio->dev, "request IRQ for GPIO %d, return %d\n", offset,
-		retirq);
+	list_for_each(p, &gpio->port_list) {
+		port = list_entry(p, struct u300_gpio_port, node);
+		if (port->number == portno)
+			break;
+	}
+	if (port == NULL) {
+		dev_err(gpio->dev, "could not locate port for GPIO %d IRQ\n",
+			offset);
+		return -EINVAL;
+	}
+
+	/*
+	 * The local hwirqs on the port are the lower three bits, there
+	 * are exactly 8 IRQs per port since they are 8-bit
+	 */
+	retirq = irq_find_mapping(port->domain, (offset & 0x7));
+
+	dev_dbg(gpio->dev, "request IRQ for GPIO %d, return %d from port %d\n",
+		offset, retirq, port->number);
 	return retirq;
 }
 
@@ -467,7 +488,7 @@ static int u300_gpio_irq_type(struct irq_data *d, unsigned trigger)
 {
 	struct u300_gpio_port *port = irq_data_get_irq_chip_data(d);
 	struct u300_gpio *gpio = port->gpio;
-	int offset = d->irq - gpio->irq_base;
+	int offset = (port->number << 3) + d->hwirq;
 	u32 val;
 
 	if ((trigger & IRQF_TRIGGER_RISING) &&
@@ -503,10 +524,12 @@ static void u300_gpio_irq_enable(struct irq_data *d)
 {
 	struct u300_gpio_port *port = irq_data_get_irq_chip_data(d);
 	struct u300_gpio *gpio = port->gpio;
-	int offset = d->irq - gpio->irq_base;
+	int offset = (port->number << 3) + d->hwirq;
 	u32 val;
 	unsigned long flags;
 
+	dev_dbg(gpio->dev, "enable IRQ for hwirq %lu on port %s, offset %d\n",
+		 d->hwirq, port->name, offset);
 	local_irq_save(flags);
 	val = readl(U300_PIN_REG(offset, ien));
 	writel(val | U300_PIN_BIT(offset), U300_PIN_REG(offset, ien));
@@ -517,7 +540,7 @@ static void u300_gpio_irq_disable(struct irq_data *d)
 {
 	struct u300_gpio_port *port = irq_data_get_irq_chip_data(d);
 	struct u300_gpio *gpio = port->gpio;
-	int offset = d->irq - gpio->irq_base;
+	int offset = (port->number << 3) + d->hwirq;
 	u32 val;
 	unsigned long flags;
 
@@ -555,8 +578,7 @@ static void u300_gpio_irq_handler(unsigned irq, struct irq_desc *desc)
 		int irqoffset;
 
 		for_each_set_bit(irqoffset, &val, U300_GPIO_PINS_PER_PORT) {
-			int pin_irq = gpio->irq_base + (port->number << 3)
-				+ irqoffset;
+			int pin_irq = irq_find_mapping(port->domain, irqoffset);
 			int offset = pinoffset + irqoffset;
 
 			dev_dbg(gpio->dev, "GPIO IRQ %d on pin %d\n",
@@ -631,6 +653,8 @@ static inline void u300_gpio_free_ports(struct u300_gpio *gpio)
 	list_for_each_safe(p, n, &gpio->port_list) {
 		port = list_entry(p, struct u300_gpio_port, node);
 		list_del(&port->node);
+		if (port->domain)
+			irq_domain_remove(port->domain);
 		kfree(port);
 	}
 }
@@ -653,7 +677,6 @@ static int __init u300_gpio_probe(struct platform_device *pdev)
 
 	gpio->chip = u300_gpio_chip;
 	gpio->chip.ngpio = plat->ports * U300_GPIO_PINS_PER_PORT;
-	gpio->irq_base = plat->gpio_irq_base;
 	gpio->chip.dev = &pdev->dev;
 	gpio->chip.base = plat->gpio_base;
 	gpio->dev = &pdev->dev;
@@ -732,18 +755,26 @@ static int __init u300_gpio_probe(struct platform_device *pdev)
 		port->irq = platform_get_irq_byname(pdev,
 						    port->name);
 
-		dev_dbg(gpio->dev, "register IRQ %d for %s\n", port->irq,
+		dev_dbg(gpio->dev, "register IRQ %d for port %s\n", port->irq,
 			port->name);
 
+		port->domain = irq_domain_add_linear(pdev->dev.of_node,
+						     U300_GPIO_PINS_PER_PORT,
+						     &irq_domain_simple_ops,
+						     port);
+		if (!port->domain)
+			goto err_no_domain;
+
 		irq_set_chained_handler(port->irq, u300_gpio_irq_handler);
 		irq_set_handler_data(port->irq, port);
 
 		/* For each GPIO pin set the unique IRQ handler */
 		for (i = 0; i < U300_GPIO_PINS_PER_PORT; i++) {
-			int irqno = gpio->irq_base + (portno << 3) + i;
+			int irqno = irq_create_mapping(port->domain, i);
 
-			dev_dbg(gpio->dev, "handler for IRQ %d on %s\n",
-				irqno, port->name);
+			dev_dbg(gpio->dev, "GPIO%d on port %s gets IRQ %d\n",
+				gpio->chip.base + (port->number << 3) + i,
+				port->name, irqno);
 			irq_set_chip_and_handler(irqno, &u300_gpio_irqchip,
 						 handle_simple_irq);
 			set_irq_flags(irqno, IRQF_VALID);
@@ -776,6 +807,7 @@ static int __init u300_gpio_probe(struct platform_device *pdev)
 err_no_pinctrl:
 	err = gpiochip_remove(&gpio->chip);
 err_no_chip:
+err_no_domain:
 err_no_port:
 	u300_gpio_free_ports(gpio);
 	iounmap(gpio->base);
diff --git a/include/linux/platform_data/pinctrl-coh901.h b/include/linux/platform_data/pinctrl-coh901.h
index 30dea25..27a23b3 100644
--- a/include/linux/platform_data/pinctrl-coh901.h
+++ b/include/linux/platform_data/pinctrl-coh901.h
@@ -13,13 +13,11 @@
  * struct u300_gpio_platform - U300 GPIO platform data
  * @ports: number of GPIO block ports
  * @gpio_base: first GPIO number for this block (use a free range)
- * @gpio_irq_base: first GPIO IRQ number for this block (use a free range)
  * @pinctrl_device: pin control device to spawn as child
  */
 struct u300_gpio_platform {
 	u8 ports;
 	int gpio_base;
-	int gpio_irq_base;
 	struct platform_device *pinctrl_device;
 };
 
-- 
1.7.11.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/