[PATCH] staging/comedi: Use dev_ printks in rtd520.c

From: YAMANE Toshiaki
Date: Sat Oct 06 2012 - 01:53:07 EST


fixed below checkpatch warning.
-Prefer netdev_info(netdev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ...

Signed-off-by: YAMANE Toshiaki <yamanetoshi@xxxxxxxxx>
---
drivers/staging/comedi/drivers/rtd520.c | 25 +++++++++++++------------
1 file changed, 13 insertions(+), 12 deletions(-)

diff --git a/drivers/staging/comedi/drivers/rtd520.c b/drivers/staging/comedi/drivers/rtd520.c
index 41d24b0..d7ed26a 100644
--- a/drivers/staging/comedi/drivers/rtd520.c
+++ b/drivers/staging/comedi/drivers/rtd520.c
@@ -507,15 +507,14 @@ static int rtd520_probe_fifo_depth(struct comedi_device *dev)
}
}
if (i == limit) {
- printk(KERN_INFO "\ncomedi: %s: failed to probe fifo size.\n",
- DRV_NAME);
+ dev_info(dev->class_dev, "failed to probe fifo size.\n");
return -EIO;
}
writel(0, devpriv->las0 + LAS0_ADC_FIFO_CLEAR);
if (fifo_size != 0x400 && fifo_size != 0x2000) {
- printk
- (KERN_INFO "\ncomedi: %s: unexpected fifo size of %i, expected 1024 or 8192.\n",
- DRV_NAME, fifo_size);
+ dev_info(dev->class_dev,
+ "unexpected fifo size of %i, expected 1024 or 8192.\n",
+ fifo_size);
return -EIO;
}
return fifo_size;
@@ -1600,7 +1599,7 @@ static int rtd_attach(struct comedi_device *dev, struct comedi_devconfig *it)
int index;
#endif

- printk(KERN_INFO "comedi%d: rtd520 attaching.\n", dev->minor);
+ dev_info(dev->class_dev, "rtd520 attaching.\n");

#if defined(CONFIG_COMEDI_DEBUG) && defined(USE_DMA)
/* You can set this a load time: modprobe comedi comedi_debug=1 */
@@ -1626,7 +1625,8 @@ static int rtd_attach(struct comedi_device *dev, struct comedi_devconfig *it)

ret = comedi_pci_enable(pcidev, DRV_NAME);
if (ret < 0) {
- printk(KERN_INFO "Failed to enable PCI device and request regions.\n");
+ dev_info(dev->class_dev,
+ "Failed to enable PCI device and request regions.\n");
return ret;
}
dev->iobase = 1; /* the "detach" needs this */
@@ -1653,8 +1653,9 @@ static int rtd_attach(struct comedi_device *dev, struct comedi_devconfig *it)
pci_read_config_byte(pcidev,
PCI_LATENCY_TIMER, &pci_latency);
if (pci_latency < 32) {
- printk(KERN_INFO "%s: PCI latency changed from %d to %d\n",
- dev->board_name, pci_latency, 32);
+ dev_info(dev->class_dev,
+ "PCI latency changed from %d to %d\n",
+ pci_latency, 32);
pci_write_config_byte(pcidev,
PCI_LATENCY_TIMER, 32);
} else {
@@ -1675,7 +1676,7 @@ static int rtd_attach(struct comedi_device *dev, struct comedi_devconfig *it)
}

/* Show board configuration */
- printk(KERN_INFO "%s:", dev->board_name);
+ dev_info(dev->class_dev, "%s:", dev->board_name);

ret = comedi_alloc_subdevices(dev, 4);
if (ret)
@@ -1767,7 +1768,7 @@ static int rtd_attach(struct comedi_device *dev, struct comedi_devconfig *it)
return ret;
}
dev->irq = pcidev->irq;
- printk(KERN_INFO "( irq=%u )", dev->irq);
+ dev_info(dev->class_dev, "( irq=%u )", dev->irq);

ret = rtd520_probe_fifo_depth(dev);
if (ret < 0)
@@ -1844,7 +1845,7 @@ static int rtd_attach(struct comedi_device *dev, struct comedi_devconfig *it)
/* set DMA trigger source */
writel(DMAS_ADFIFO_HALF_FULL, devpriv->las0 + LAS0_DMA0_SRC);
} else {
- printk(KERN_INFO "( no IRQ->no DMA )");
+ dev_info(dev->class_dev, "( no IRQ->no DMA )");
}
#endif /* USE_DMA */

--
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/