[ 06/58] usb: gadget: make g_printer enumerate again
From: Greg Kroah-Hartman
Date: Thu Oct 04 2012 - 17:20:25 EST
3.5-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
commit 5a175bb84d7344fbe5e26cf61b597129e7c80564 upstream.
This was broken in 2e87edf49 ("usb: gadget: make g_printer use
composite").
The USB-strings were not setup properly and were not used. No function
was added which results in an empty USB config.
While fixing this, the interface number is now auto generated and not
hard coded to 0.
Acked-by: Michal Nazarewicz <mina86@xxxxxxxxxx>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
Signed-off-by: Felipe Balbi <balbi@xxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/usb/gadget/printer.c | 128 +++++++++++++++++++++----------------------
1 file changed, 65 insertions(+), 63 deletions(-)
--- a/drivers/usb/gadget/printer.c
+++ b/drivers/usb/gadget/printer.c
@@ -141,18 +141,14 @@ module_param(qlen, uint, S_IRUGO|S_IWUSR
* descriptors are built on demand.
*/
-#define STRING_MANUFACTURER 1
-#define STRING_PRODUCT 2
-#define STRING_SERIALNUM 3
+#define STRING_MANUFACTURER 0
+#define STRING_PRODUCT 1
+#define STRING_SERIALNUM 2
/* holds our biggest descriptor */
#define USB_DESC_BUFSIZE 256
#define USB_BUFSIZE 8192
-/* This device advertises one configuration. */
-#define DEV_CONFIG_VALUE 1
-#define PRINTER_INTERFACE 0
-
static struct usb_device_descriptor device_desc = {
.bLength = sizeof device_desc,
.bDescriptorType = USB_DT_DEVICE,
@@ -162,16 +158,12 @@ static struct usb_device_descriptor devi
.bDeviceProtocol = 0,
.idVendor = cpu_to_le16(PRINTER_VENDOR_NUM),
.idProduct = cpu_to_le16(PRINTER_PRODUCT_NUM),
- .iManufacturer = STRING_MANUFACTURER,
- .iProduct = STRING_PRODUCT,
- .iSerialNumber = STRING_SERIALNUM,
.bNumConfigurations = 1
};
static struct usb_interface_descriptor intf_desc = {
.bLength = sizeof intf_desc,
.bDescriptorType = USB_DT_INTERFACE,
- .bInterfaceNumber = PRINTER_INTERFACE,
.bNumEndpoints = 2,
.bInterfaceClass = USB_CLASS_PRINTER,
.bInterfaceSubClass = 1, /* Printer Sub-Class */
@@ -260,9 +252,9 @@ static char pnp_string [1024] =
/* static strings, in UTF-8 */
static struct usb_string strings [] = {
- { STRING_MANUFACTURER, manufacturer, },
- { STRING_PRODUCT, product_desc, },
- { STRING_SERIALNUM, serial_num, },
+ [STRING_MANUFACTURER].s = manufacturer,
+ [STRING_PRODUCT].s = product_desc,
+ [STRING_SERIALNUM].s = serial_num,
{ } /* end of list */
};
@@ -871,25 +863,13 @@ static int set_interface(struct printer_
int result = 0;
/* Free the current interface */
- switch (dev->interface) {
- case PRINTER_INTERFACE:
- printer_reset_interface(dev);
- break;
- }
+ printer_reset_interface(dev);
- switch (number) {
- case PRINTER_INTERFACE:
- result = set_printer_interface(dev);
- if (result) {
- printer_reset_interface(dev);
- } else {
- dev->interface = PRINTER_INTERFACE;
- }
- break;
- default:
- result = -EINVAL;
- /* FALL THROUGH */
- }
+ result = set_printer_interface(dev);
+ if (result)
+ printer_reset_interface(dev);
+ else
+ dev->interface = number;
if (!result)
INFO(dev, "Using interface %x\n", number);
@@ -972,7 +952,7 @@ static int printer_func_setup(struct usb
switch (ctrl->bRequest) {
case 0: /* Get the IEEE-1284 PNP String */
/* Only one printer interface is supported. */
- if ((wIndex>>8) != PRINTER_INTERFACE)
+ if ((wIndex>>8) != dev->interface)
break;
value = (pnp_string[0]<<8)|pnp_string[1];
@@ -983,7 +963,7 @@ static int printer_func_setup(struct usb
case 1: /* Get Port Status */
/* Only one printer interface is supported. */
- if (wIndex != PRINTER_INTERFACE)
+ if (wIndex != dev->interface)
break;
*(u8 *)req->buf = dev->printer_status;
@@ -992,7 +972,7 @@ static int printer_func_setup(struct usb
case 2: /* Soft Reset */
/* Only one printer interface is supported. */
- if (wIndex != PRINTER_INTERFACE)
+ if (wIndex != dev->interface)
break;
printer_soft_reset(dev);
@@ -1020,6 +1000,37 @@ unknown:
static int __init printer_func_bind(struct usb_configuration *c,
struct usb_function *f)
{
+ struct printer_dev *dev = container_of(f, struct printer_dev, function);
+ struct usb_composite_dev *cdev = c->cdev;
+ struct usb_ep *in_ep, *out_ep;
+ int id;
+
+ id = usb_interface_id(c, f);
+ if (id < 0)
+ return id;
+ intf_desc.bInterfaceNumber = id;
+
+ /* all we really need is bulk IN/OUT */
+ in_ep = usb_ep_autoconfig(cdev->gadget, &fs_ep_in_desc);
+ if (!in_ep) {
+autoconf_fail:
+ dev_err(&cdev->gadget->dev, "can't autoconfigure on %s\n",
+ cdev->gadget->name);
+ return -ENODEV;
+ }
+ in_ep->driver_data = in_ep; /* claim */
+
+ out_ep = usb_ep_autoconfig(cdev->gadget, &fs_ep_out_desc);
+ if (!out_ep)
+ goto autoconf_fail;
+ out_ep->driver_data = out_ep; /* claim */
+
+ /* assumes that all endpoints are dual-speed */
+ hs_ep_in_desc.bEndpointAddress = fs_ep_in_desc.bEndpointAddress;
+ hs_ep_out_desc.bEndpointAddress = fs_ep_out_desc.bEndpointAddress;
+
+ dev->in_ep = in_ep;
+ dev->out_ep = out_ep;
return 0;
}
@@ -1035,7 +1046,8 @@ static int printer_func_set_alt(struct u
int ret = -ENOTSUPP;
if (!alt)
- ret = set_interface(dev, PRINTER_INTERFACE);
+ ret = set_interface(dev, intf);
+
return ret;
}
@@ -1107,13 +1119,14 @@ static int __init printer_bind_config(st
{
struct usb_gadget *gadget = c->cdev->gadget;
struct printer_dev *dev;
- struct usb_ep *in_ep, *out_ep;
int status = -ENOMEM;
int gcnum;
size_t len;
u32 i;
struct usb_request *req;
+ usb_ep_autoconfig_reset(gadget);
+
dev = &usb_printer_gadget;
dev->function.name = shortname;
@@ -1125,6 +1138,10 @@ static int __init printer_bind_config(st
dev->function.set_alt = printer_func_set_alt;
dev->function.disable = printer_func_disable;
+ status = usb_add_function(c, &dev->function);
+ if (status)
+ return status;
+
/* Setup the sysfs files for the printer gadget. */
dev->pdev = device_create(usb_gadget_class, NULL, g_printer_devno,
NULL, "g_printer");
@@ -1169,26 +1186,6 @@ static int __init printer_bind_config(st
pnp_string[0] = (len >> 8) & 0xFF;
pnp_string[1] = len & 0xFF;
- /* all we really need is bulk IN/OUT */
- usb_ep_autoconfig_reset(gadget);
- in_ep = usb_ep_autoconfig(gadget, &fs_ep_in_desc);
- if (!in_ep) {
-autoconf_fail:
- dev_err(&gadget->dev, "can't autoconfigure on %s\n",
- gadget->name);
- return -ENODEV;
- }
- in_ep->driver_data = in_ep; /* claim */
-
- out_ep = usb_ep_autoconfig(gadget, &fs_ep_out_desc);
- if (!out_ep)
- goto autoconf_fail;
- out_ep->driver_data = out_ep; /* claim */
-
- /* assumes that all endpoints are dual-speed */
- hs_ep_in_desc.bEndpointAddress = fs_ep_in_desc.bEndpointAddress;
- hs_ep_out_desc.bEndpointAddress = fs_ep_out_desc.bEndpointAddress;
-
usb_gadget_set_selfpowered(gadget);
if (gadget->is_otg) {
@@ -1215,9 +1212,6 @@ autoconf_fail:
dev->current_rx_bytes = 0;
dev->current_rx_buf = NULL;
- dev->in_ep = in_ep;
- dev->out_ep = out_ep;
-
for (i = 0; i < QLEN; i++) {
req = printer_req_alloc(dev->in_ep, USB_BUFSIZE, GFP_KERNEL);
if (!req) {
@@ -1250,8 +1244,6 @@ autoconf_fail:
dev->gadget = gadget;
INFO(dev, "%s, version: " DRIVER_VERSION "\n", driver_desc);
- INFO(dev, "using %s, OUT %s IN %s\n", gadget->name, out_ep->name,
- in_ep->name);
return 0;
fail:
@@ -1266,7 +1258,17 @@ static int printer_unbind(struct usb_com
static int __init printer_bind(struct usb_composite_dev *cdev)
{
- return usb_add_config(cdev, &printer_cfg_driver, printer_bind_config);
+ int ret;
+
+ ret = usb_string_ids_tab(cdev, strings);
+ if (ret < 0)
+ return ret;
+ device_desc.iManufacturer = strings[STRING_MANUFACTURER].id;
+ device_desc.iProduct = strings[STRING_PRODUCT].id;
+ device_desc.iSerialNumber = strings[STRING_SERIALNUM].id;
+
+ ret = usb_add_config(cdev, &printer_cfg_driver, printer_bind_config);
+ return ret;
}
static struct usb_composite_driver printer_driver = {
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/