[ 261/262] drm/i915: only enable sdvo hotplug irq if needed

[Greg Kroah-Hartman]

From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>

3.5-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jani Nikula <jani.nikula@xxxxxxxxx>

commit fcbc50da7753b210b4442ca9abc4efbd4e481f6e upstream.

Avoid constant wakeups caused by noisy irq lines when we don't even care
about the irq. This should be particularly useful for i945g/gm where the
hotplug has been disabled:

commit 768b107e4b3be0acf6f58e914afe4f337c00932b
Author: Daniel Vetter <daniel.vetter@xxxxxxxx>
Date:   Fri May 4 11:29:56 2012 +0200

    drm/i915: disable sdvo hotplug on i945g/gm

v2: While at it, remove the bogus hotplug_active read, and do not mask
hotplug_active[0] before checking whether the irq is needed, per discussion
with Daniel on IRC.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=38442
Tested-by: Dominik KÃppl <dominik@xxxxxxxxxxx>
Signed-off-by: Jani Nikula <jani.nikula@xxxxxxxxx>
Signed-off-by: Daniel Vetter <daniel.vetter@xxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
 drivers/gpu/drm/i915/intel_sdvo.c |   23 ++++++++++-------------
 1 file changed, 10 insertions(+), 13 deletions(-)

--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -2552,25 +2552,12 @@ bool intel_sdvo_init(struct drm_device *
 		}
 	}
 
-	if (intel_sdvo->is_sdvob)
-		dev_priv->hotplug_supported_mask |= SDVOB_HOTPLUG_INT_STATUS;
-	else
-		dev_priv->hotplug_supported_mask |= SDVOC_HOTPLUG_INT_STATUS;
-
 	drm_encoder_helper_add(&intel_encoder->base, &intel_sdvo_helper_funcs);
 
 	/* In default case sdvo lvds is false */
 	if (!intel_sdvo_get_capabilities(intel_sdvo, &intel_sdvo->caps))
 		goto err;
 
-	/* Set up hotplug command - note paranoia about contents of reply.
-	 * We assume that the hardware is in a sane state, and only touch
-	 * the bits we think we understand.
-	 */
-	intel_sdvo_get_value(intel_sdvo, SDVO_CMD_GET_ACTIVE_HOT_PLUG,
-			     &intel_sdvo->hotplug_active, 2);
-	intel_sdvo->hotplug_active[0] &= ~0x3;
-
 	if (intel_sdvo_output_setup(intel_sdvo,
 				    intel_sdvo->caps.output_flags) != true) {
 		DRM_DEBUG_KMS("SDVO output failed to setup on %s\n",
@@ -2578,6 +2565,16 @@ bool intel_sdvo_init(struct drm_device *
 		goto err;
 	}
 
+	/* Only enable the hotplug irq if we need it, to work around noisy
+	 * hotplug lines.
+	 */
+	if (intel_sdvo->hotplug_active[0]) {
+		if (intel_sdvo->is_sdvob)
+			dev_priv->hotplug_supported_mask |= SDVOB_HOTPLUG_INT_STATUS;
+		else
+			dev_priv->hotplug_supported_mask |= SDVOC_HOTPLUG_INT_STATUS;
+	}
+
 	intel_sdvo_select_ddc_bus(dev_priv, intel_sdvo, sdvo_reg);
 
 	/* Set the input timing to the screen. Assume always input 0. */


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/