Re: [alsa-devel] [PATCH v3 00/15] ASoC: OMAP: Convert to use dmaengine

[Ricardo Neri]

Hi Peter, Mark,

On 09/14/2012 07:05 AM, Peter Ujfalusi wrote:
> Hello,
>
> Changes since v2:
> - As it has been discussed the no_wakeup parameter has been replaced with flags
>    for the dmaengine APIs
>
> Changes since v1:
> - Support for pause/resume for OMAP audio via dmaengine
> - dmaengine: support for NO_PERIOD_WAKEUP in cyclic mode
>   - OMAP to keep supporting NO_PERIOD_WAKEUP for audio
>   - Other plaforms can also try to enable this mode since we have now generic
>     interface to do so.
>
> This series will switch the OMAP audio to use dmaengine.
> The final patch which does the switch was based on Russell King's earlier patch.
>
> The first 10 patch is to prepare the OMAP audio drivers for a smooth change to
> dmaengine:
> - sDMA FRAME sync mode is removed and replaced with PACKET mode
> - dai drivers no longer need to configure sDMA sync mode
> - dai drivers does not need to specify the DMA word length - with the exception
>    of the omap-hdmi driver which requires 32bit word length regardless of the
>    audio format in use
> - the McPDM driver used (to my surprise) hackish way of getting the DMA channel
>    and address - via defines from some header files
>
> After the conversion OMAP audio support should have the same features as before,
> no regressions expected.
>
> I have tested the series on:
> - BeagleBoard (audio via McBSP):
>   - aplay/arecord. In element mode and in threshold mode with different period
>     sizes
>   - mplayer -ao alsa: for direct ALSA access
>   - mplayer -ao pulse: via PulseAudio to test NO_PERIOD_WAKEUP feature
> - OMAP4 Blaze (audio via McPDM and DMIC)
>   - aplay/arecord
>   - mplayer -ao alsa: for direct ALSA access
>   - mplayer -ao pulse: via PulseAudio to test NO_PERIOD_WAKEUP feature
>
> The patches has been generated against:
> git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-3.7
>
> Janusz: Can you retest this series on OMAP1 to be sure I have not broken it?
> Ricardo: Can you test the omap-hmdi if it is still working?

I tested these changes from Mark's for-3.7 branch. HDMI audio is working 
fine after applying patch 03. Such patch is missing in Mark's branch and 
this causes a build break with omap2plus_defconfig. Not sure if this is 
expected, Most likely not.

Tested-by: Ricardo Neri <ricardo.neri@xxxxxx>

Ricardo
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/