Re: linux-next: build failure after merge of the final tree(net-next tree related)

[Benjamin Herrenschmidt]

On Thu, 2012-09-20 at 18:53 -0400, David Miller wrote:
> From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
> Date: Fri, 21 Sep 2012 08:22:44 +1000
> 
> > Hrm, that's ancient gunk, I'll have to dig. We potentially can support
> > ISA devices DMA'ing from an ISA bridge... but via the iommu, which means
> > isa_virt_to_bus is a non-starter.
> > 
> > But then, do we really care ? IE. Is there single device that actually
> > requires ISA_DMA_API and that is expected to work on any currently
> > supported powerpc hw ? :-)
> > 
> > We don't even support PReP anymore, so that leaves us with what ?
> 
> ISA_DMA_API implies a fixed window of addresses which are <= 32-bits
> on the bus, which is a hardware requirement of these devices.
>
> isa_virt_to_bus() goes to that physical address, and the expection is
> that you use GFP_DMA and thus the physical addresses fit inside of
> an unsigned int.

Right, but on ppc, GFP_DMA is a nop (no separate ZONE_DMA, or rather all
of memory is ZONE_DMA). It's always been like that afaik.

We could support ISA device limited addressability using the iommu but
that would involve a map/unmap type API (which I remember we did support
in the old days by passing NULL to pci_map_*, but we dropped that along
the way).

> isa_virt_to_bus() basically amounts to a virt-->phys plus a cast.
> 
> > Anybody has an objection to turning ISA_DMA_API off ?
> 
> Then you can remove all of the DMA api stuff in powerpc's asm/dma.h
> but some of it looks like it might be in use.

I will dig a bit. I think there might be some users of the ISA DMA
engine for legacy floppies and parport on some early pSeries and CHRP
machines (including Pegasos).

Cheers,
Ben.


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/