Re: [PATCH 01/17] ASoC: Ux500: Move MSP pinctrl setup into the MSPdriver

From: Lee Jones
Date: Mon Sep 10 2012 - 12:46:27 EST


Ola poke.

On Fri, Aug 24, 2012 at 03:01:37PM +0100, Lee Jones wrote:
> In the initial submission of the MSP driver msp1 and msp3's associated
> pinctrl mechanism was passed back to platform code using a plat_init()
> call-back routine, but it has no place in platform code. The MSP driver
> should set this up for the appropriate ports. Instead we use a use_pinctrl
> identifier which is passed from platform_data/Device Tree which indicates
> which ports should use pinctrl.
>
> CC: alsa-devel@xxxxxxxxxxxxxxxx
> Signed-off-by: Lee Jones <lee.jones@xxxxxxxxxx>
> ---
> arch/arm/mach-ux500/board-mop500-msp.c | 75 +-------------------------------
> arch/arm/mach-ux500/include/mach/msp.h | 2 -
> sound/soc/ux500/ux500_msp_i2s.c | 67 +++++++++++++++++++++-------
> sound/soc/ux500/ux500_msp_i2s.h | 8 +++-
> 4 files changed, 58 insertions(+), 94 deletions(-)
>
> diff --git a/arch/arm/mach-ux500/board-mop500-msp.c b/arch/arm/mach-ux500/board-mop500-msp.c
> index df15646..fc78d5d 100644
> --- a/arch/arm/mach-ux500/board-mop500-msp.c
> +++ b/arch/arm/mach-ux500/board-mop500-msp.c
> @@ -23,53 +23,6 @@
> #include "devices-db8500.h"
> #include "pins-db8500.h"
>
> -/* MSP1/3 Tx/Rx usage protection */
> -static DEFINE_SPINLOCK(msp_rxtx_lock);
> -
> -/* Reference Count */
> -static int msp_rxtx_ref;
> -
> -/* Pin modes */
> -struct pinctrl *msp1_p;
> -struct pinctrl_state *msp1_def;
> -struct pinctrl_state *msp1_sleep;
> -
> -int msp13_i2s_init(void)
> -{
> - int retval = 0;
> - unsigned long flags;
> -
> - spin_lock_irqsave(&msp_rxtx_lock, flags);
> - if (msp_rxtx_ref == 0 && !(IS_ERR(msp1_p) || IS_ERR(msp1_def))) {
> - retval = pinctrl_select_state(msp1_p, msp1_def);
> - if (retval)
> - pr_err("could not set MSP1 defstate\n");
> - }
> - if (!retval)
> - msp_rxtx_ref++;
> - spin_unlock_irqrestore(&msp_rxtx_lock, flags);
> -
> - return retval;
> -}
> -
> -int msp13_i2s_exit(void)
> -{
> - int retval = 0;
> - unsigned long flags;
> -
> - spin_lock_irqsave(&msp_rxtx_lock, flags);
> - WARN_ON(!msp_rxtx_ref);
> - msp_rxtx_ref--;
> - if (msp_rxtx_ref == 0 && !(IS_ERR(msp1_p) || IS_ERR(msp1_sleep))) {
> - retval = pinctrl_select_state(msp1_p, msp1_sleep);
> - if (retval)
> - pr_err("could not set MSP1 sleepstate\n");
> - }
> - spin_unlock_irqrestore(&msp_rxtx_lock, flags);
> -
> - return retval;
> -}
> -
> static struct stedma40_chan_cfg msp0_dma_rx = {
> .high_priority = true,
> .dir = STEDMA40_PERIPH_TO_MEM,
> @@ -132,8 +85,6 @@ static struct msp_i2s_platform_data msp1_platform_data = {
> .id = MSP_I2S_1,
> .msp_i2s_dma_rx = NULL,
> .msp_i2s_dma_tx = &msp1_dma_tx,
> - .msp_i2s_init = msp13_i2s_init,
> - .msp_i2s_exit = msp13_i2s_exit,
> };
>
> static struct stedma40_chan_cfg msp2_dma_rx = {
> @@ -219,47 +170,23 @@ static struct msp_i2s_platform_data msp3_platform_data = {
> .id = MSP_I2S_3,
> .msp_i2s_dma_rx = &msp1_dma_rx,
> .msp_i2s_dma_tx = NULL,
> - .msp_i2s_init = msp13_i2s_init,
> - .msp_i2s_exit = msp13_i2s_exit,
> };
>
> int mop500_msp_init(struct device *parent)
> {
> - struct platform_device *msp1;
> -
> pr_info("%s: Register platform-device 'snd-soc-mop500'.\n", __func__);
> platform_device_register(&snd_soc_mop500);
>
> pr_info("Initialize MSP I2S-devices.\n");
> db8500_add_msp_i2s(parent, 0, U8500_MSP0_BASE, IRQ_DB8500_MSP0,
> &msp0_platform_data);
> - msp1 = db8500_add_msp_i2s(parent, 1, U8500_MSP1_BASE, IRQ_DB8500_MSP1,
> + db8500_add_msp_i2s(parent, 1, U8500_MSP1_BASE, IRQ_DB8500_MSP1,
> &msp1_platform_data);
> db8500_add_msp_i2s(parent, 2, U8500_MSP2_BASE, IRQ_DB8500_MSP2,
> &msp2_platform_data);
> db8500_add_msp_i2s(parent, 3, U8500_MSP3_BASE, IRQ_DB8500_MSP1,
> &msp3_platform_data);
>
> - /* Get the pinctrl handle for MSP1 */
> - if (msp1) {
> - msp1_p = pinctrl_get(&msp1->dev);
> - if (IS_ERR(msp1_p))
> - dev_err(&msp1->dev, "could not get MSP1 pinctrl\n");
> - else {
> - msp1_def = pinctrl_lookup_state(msp1_p,
> - PINCTRL_STATE_DEFAULT);
> - if (IS_ERR(msp1_def)) {
> - dev_err(&msp1->dev,
> - "could not get MSP1 defstate\n");
> - }
> - msp1_sleep = pinctrl_lookup_state(msp1_p,
> - PINCTRL_STATE_SLEEP);
> - if (IS_ERR(msp1_sleep))
> - dev_err(&msp1->dev,
> - "could not get MSP1 idlestate\n");
> - }
> - }
> -
> pr_info("%s: Register platform-device 'ux500-pcm'\n", __func__);
> platform_device_register(&ux500_pcm);
>
> diff --git a/arch/arm/mach-ux500/include/mach/msp.h b/arch/arm/mach-ux500/include/mach/msp.h
> index 798be19..3cc7142 100644
> --- a/arch/arm/mach-ux500/include/mach/msp.h
> +++ b/arch/arm/mach-ux500/include/mach/msp.h
> @@ -22,8 +22,6 @@ struct msp_i2s_platform_data {
> enum msp_i2s_id id;
> struct stedma40_chan_cfg *msp_i2s_dma_rx;
> struct stedma40_chan_cfg *msp_i2s_dma_tx;
> - int (*msp_i2s_init) (void);
> - int (*msp_i2s_exit) (void);
> };
>
> #endif
> diff --git a/sound/soc/ux500/ux500_msp_i2s.c b/sound/soc/ux500/ux500_msp_i2s.c
> index 36be11e..08813c5 100644
> --- a/sound/soc/ux500/ux500_msp_i2s.c
> +++ b/sound/soc/ux500/ux500_msp_i2s.c
> @@ -15,6 +15,7 @@
>
> #include <linux/module.h>
> #include <linux/platform_device.h>
> +#include <linux/pinctrl/consumer.h>
> #include <linux/delay.h>
> #include <linux/slab.h>
>
> @@ -25,6 +26,9 @@
>
> #include "ux500_msp_i2s.h"
>
> +/* MSP1/3 Tx/Rx usage protection */
> +static DEFINE_SPINLOCK(msp_rxtx_lock);
> +
> /* Protocol desciptors */
> static const struct msp_protdesc prot_descs[] = {
> { /* I2S */
> @@ -352,17 +356,23 @@ static int configure_multichannel(struct ux500_msp *msp,
>
> static int enable_msp(struct ux500_msp *msp, struct ux500_msp_config *config)
> {
> - int status = 0;
> + int status = 0, retval = 0;
> u32 reg_val_DMACR, reg_val_GCR;
> + unsigned long flags;
>
> /* Check msp state whether in RUN or CONFIGURED Mode */
> - if ((msp->msp_state == MSP_STATE_IDLE) && (msp->plat_init)) {
> - status = msp->plat_init();
> - if (status) {
> - dev_err(msp->dev, "%s: ERROR: Failed to init MSP (%d)!\n",
> - __func__, status);
> - return status;
> + if (msp->msp_state == MSP_STATE_IDLE) {
> + spin_lock_irqsave(&msp_rxtx_lock, flags);
> + if (msp->pinctrl_rxtx_ref == 0 &&
> + !(IS_ERR(msp->pinctrl_p) || IS_ERR(msp->pinctrl_def))) {
> + retval = pinctrl_select_state(msp->pinctrl_p,
> + msp->pinctrl_def);
> + if (retval)
> + pr_err("could not set MSP defstate\n");
> }
> + if (!retval)
> + msp->pinctrl_rxtx_ref++;
> + spin_unlock_irqrestore(&msp_rxtx_lock, flags);
> }
>
> /* Configure msp with protocol dependent settings */
> @@ -620,7 +630,8 @@ int ux500_msp_i2s_trigger(struct ux500_msp *msp, int cmd, int direction)
>
> int ux500_msp_i2s_close(struct ux500_msp *msp, unsigned int dir)
> {
> - int status = 0;
> + int status = 0, retval = 0;
> + unsigned long flags;
>
> dev_dbg(msp->dev, "%s: Enter (dir = 0x%01x).\n", __func__, dir);
>
> @@ -631,12 +642,19 @@ int ux500_msp_i2s_close(struct ux500_msp *msp, unsigned int dir)
> writel((readl(msp->registers + MSP_GCR) &
> (~(FRAME_GEN_ENABLE | SRG_ENABLE))),
> msp->registers + MSP_GCR);
> - if (msp->plat_exit)
> - status = msp->plat_exit();
> - if (status)
> - dev_warn(msp->dev,
> - "%s: WARN: ux500_msp_i2s_exit failed (%d)!\n",
> - __func__, status);
> +
> + spin_lock_irqsave(&msp_rxtx_lock, flags);
> + WARN_ON(!msp->pinctrl_rxtx_ref);
> + msp->pinctrl_rxtx_ref--;
> + if (msp->pinctrl_rxtx_ref == 0 &&
> + !(IS_ERR(msp->pinctrl_p) || IS_ERR(msp->pinctrl_sleep))) {
> + retval = pinctrl_select_state(msp->pinctrl_p,
> + msp->pinctrl_sleep);
> + if (retval)
> + pr_err("could not set MSP sleepstate\n");
> + }
> + spin_unlock_irqrestore(&msp_rxtx_lock, flags);
> +
> writel(0, msp->registers + MSP_GCR);
> writel(0, msp->registers + MSP_TCF);
> writel(0, msp->registers + MSP_RCF);
> @@ -678,8 +696,6 @@ int ux500_msp_i2s_init_msp(struct platform_device *pdev,
>
> msp->id = platform_data->id;
> msp->dev = &pdev->dev;
> - msp->plat_init = platform_data->msp_i2s_init;
> - msp->plat_exit = platform_data->msp_i2s_exit;
> msp->dma_cfg_rx = platform_data->msp_i2s_dma_rx;
> msp->dma_cfg_tx = platform_data->msp_i2s_dma_tx;
>
> @@ -717,6 +733,25 @@ int ux500_msp_i2s_init_msp(struct platform_device *pdev,
> dev_dbg(&pdev->dev, "I2S device-name: '%s'\n", i2s_cont->name);
> msp->i2s_cont = i2s_cont;
>
> + msp->pinctrl_p = pinctrl_get(msp->dev);
> + if (IS_ERR(msp->pinctrl_p))
> + dev_err(&pdev->dev, "could not get MSP pinctrl\n");
> + else {
> + msp->pinctrl_def = pinctrl_lookup_state(msp->pinctrl_p,
> + PINCTRL_STATE_DEFAULT);
> + if (IS_ERR(msp->pinctrl_def)) {
> + dev_err(&pdev->dev,
> + "could not get MSP defstate (%li)\n",
> + PTR_ERR(msp->pinctrl_def));
> + }
> + msp->pinctrl_sleep = pinctrl_lookup_state(msp->pinctrl_p,
> + PINCTRL_STATE_SLEEP);
> + if (IS_ERR(msp->pinctrl_sleep))
> + dev_err(&pdev->dev,
> + "could not get MSP idlestate (%li)\n",
> + PTR_ERR(msp->pinctrl_def));
> + }
> +
> return 0;
>
> err_i2s_cont:
> diff --git a/sound/soc/ux500/ux500_msp_i2s.h b/sound/soc/ux500/ux500_msp_i2s.h
> index 2d9136d..1311c0d 100644
> --- a/sound/soc/ux500/ux500_msp_i2s.h
> +++ b/sound/soc/ux500/ux500_msp_i2s.h
> @@ -524,14 +524,18 @@ struct ux500_msp {
> struct dma_chan *rx_pipeid;
> enum msp_state msp_state;
> int (*transfer) (struct ux500_msp *msp, struct i2s_message *message);
> - int (*plat_init) (void);
> - int (*plat_exit) (void);
> struct timer_list notify_timer;
> int def_elem_len;
> unsigned int dir_busy;
> int loopback_enable;
> u32 backup_regs[MAX_MSP_BACKUP_REGS];
> unsigned int f_bitclk;
> + /* Pin modes */
> + struct pinctrl *pinctrl_p;
> + struct pinctrl_state *pinctrl_def;
> + struct pinctrl_state *pinctrl_sleep;
> + /* Reference Count */
> + int pinctrl_rxtx_ref;
> };
>
> struct ux500_msp_dma_params {
> --
> 1.7.9.5
>

--
Lee Jones
Linaro ST-Ericsson Landing Team Lead
Linaro.org â Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/