[PATCH] ARM: S3C24XX: Add WIZnet W5300E01-ARM board support

From: Taehun Kim
Date: Mon Sep 03 2012 - 02:20:39 EST


This patch adds WIZnet W5300E01 board. I tested this code in the board.
Please review this patch and apply it if do not have any problems.

Taehun kim

Signed-off-by: Taehun Kim <kth3321@xxxxxxxxx>
---
arch/arm/mach-s3c24xx/Kconfig | 5 +
arch/arm/mach-s3c24xx/Makefile | 1 +
arch/arm/mach-s3c24xx/mach-w5300e01.c | 186 +++++++++++++++++++++++++++++++++
3 files changed, 192 insertions(+)
create mode 100644 arch/arm/mach-s3c24xx/mach-w5300e01.c

diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index d56b0f7..94b60ca 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -248,6 +248,11 @@ config MACH_VR1000
help
Say Y here if you are using the Thorcom VR1000 board.

+config MACH_W5300E01
+ bool "WIZnet W5300E01-ARM Board"
+ help
+ Say Y here if you are using the Wiznet W5300E01-ARM board.
+
endif # CPU_S3C2410

config S3C2412_PM_SLEEP
diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile
index 0ab6ab1..fc1a89e 100644
--- a/arch/arm/mach-s3c24xx/Makefile
+++ b/arch/arm/mach-s3c24xx/Makefile
@@ -61,6 +61,7 @@ obj-$(CONFIG_MACH_QT2410) += mach-qt2410.o
obj-$(CONFIG_ARCH_SMDK2410) += mach-smdk2410.o
obj-$(CONFIG_MACH_TCT_HAMMER) += mach-tct_hammer.o
obj-$(CONFIG_MACH_VR1000) += mach-vr1000.o
+obj-$(CONFIG_MACH_W5300E01) += mach-w5300e01.o

obj-$(CONFIG_MACH_JIVE) += mach-jive.o
obj-$(CONFIG_MACH_SMDK2413) += mach-smdk2413.o
diff --git a/arch/arm/mach-s3c24xx/mach-w5300e01.c b/arch/arm/mach-s3c24xx/mach-w5300e01.c
new file mode 100644
index 0000000..5ed79f5
--- /dev/null
+++ b/arch/arm/mach-s3c24xx/mach-w5300e01.c
@@ -0,0 +1,186 @@
+/* linux/arch/arm/mach-s3c24xx/mach-w5300e01.c
+ *
+ * Copyright (c) 2012 Taehun Kim <kth3321@xxxxxxxxx>
+ *
+ * For product information, visit http://www.wiznet.co.kr/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * @History:
+ * derived from linux/arch/arm/mach-s3c24xx/mach-bast.c, written by
+ * Ben Dooks <ben@xxxxxxxxxxxx>
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach-types.h>
+
+#include <mach/regs-gpio.h>
+#include <plat/gpio-cfg.h>
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/regs-serial.h>
+#include <plat/nand.h>
+#include <plat/pm.h>
+
+static struct map_desc w5300e01_iodesc[] __initdata = {
+ /* Character LCD register map. */
+ { 0xf8000000, __phys_to_pfn(S3C2410_CS3), SZ_1M, MT_DEVICE }
+};
+
+#define UCON S3C2410_UCON_DEFAULT
+#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
+#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
+
+static struct s3c2410_uartcfg w5300e01_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ }
+};
+
+static struct mtd_partition w5300e01_mtd_partitions[] = {
+ [0] = {
+ .name = "Bootloader",
+ .size = 0x20000,
+ .offset = 0,
+ .mask_flags = MTD_WRITEABLE,
+ },
+ [1] = {
+ .name = "Boot Param",
+ .size = 0x20000,
+ .offset = MTDPART_OFS_APPEND,
+ },
+ [2] = {
+ .name = "Kernel",
+ .size = 0x3C0000,
+ .offset = MTDPART_OFS_APPEND,
+ },
+ [3] = {
+ .name = "Ramdisk",
+ .size = 0x1000000,
+ .offset = MTDPART_OFS_APPEND,
+ },
+ [4] = {
+ .name = "JFFS2 FileSystem",
+ .size = MTDPART_SIZ_FULL,
+ .offset = MTDPART_OFS_APPEND,
+ },
+};
+
+static struct resource w5300_resources[] = {
+ [0] = {
+ .start = S3C2410_CS2,
+ .end = S3C2410_CS2 + SZ_1M,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_EINT0,
+ .end = IRQ_EINT0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device w5300_device = {
+ .name = "w5300",
+ .num_resources = ARRAY_SIZE(w5300_resources),
+ .resource = w5300_resources,
+};
+
+static struct s3c2410_nand_set w5300e01_nand_sets[] = {
+ [0] = {
+ .name = "W5300E01",
+ .nr_chips = 1,
+ .nr_partitions = ARRAY_SIZE(w5300e01_mtd_partitions),
+ .partitions = w5300e01_mtd_partitions,
+ },
+};
+
+static struct s3c2410_platform_nand w5300e01_nand_info = {
+ .tacls = 20,
+ .twrph0 = 60,
+ .twrph1 = 30,
+ .nr_sets = ARRAY_SIZE(w5300e01_nand_sets),
+ .sets = w5300e01_nand_sets,
+};
+
+static struct platform_device *w5300e01_devices[] __initdata = {
+ &s3c_device_nand,
+ &s3c_device_usbgadget,
+ &s3c_device_wdt,
+ &s3c_device_i2c0,
+ &s3c_device_iis,
+ &w5300_device,
+};
+
+static void __init w5300e01_map_io(void)
+{
+ s3c24xx_init_io(w5300e01_iodesc, ARRAY_SIZE(w5300e01_iodesc));
+ s3c24xx_init_clocks(0);
+ s3c24xx_init_uarts(w5300e01_uartcfgs, ARRAY_SIZE(w5300e01_uartcfgs));
+}
+
+static void __init w5300e01_init(void)
+{
+ s3c_nand_set_platdata(&w5300e01_nand_info);
+ platform_add_devices(w5300e01_devices, ARRAY_SIZE(w5300e01_devices));
+
+ /* W5300 interrupt pin. */
+ s3c2410_gpio_cfgpin(S3C2410_GPF(0), S3C2410_GPIO_IRQ);
+
+ s3c2410_gpio_cfgpin(S3C2410_GPF(4), S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_cfgpin(S3C2410_GPF(5), S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_cfgpin(S3C2410_GPF(6), S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_cfgpin(S3C2410_GPF(7), S3C2410_GPIO_OUTPUT);
+
+ s3c2410_gpio_setpin(S3C2410_GPF(0), 1);
+ s3c2410_gpio_setpin(S3C2410_GPF(4), 1);
+ s3c2410_gpio_setpin(S3C2410_GPF(5), 1);
+ s3c2410_gpio_setpin(S3C2410_GPF(6), 1);
+ s3c2410_gpio_setpin(S3C2410_GPF(7), 1);
+
+ s3c_pm_init();
+}
+
+MACHINE_START(W5300E01, "WIZnet W5300E01-ARM")
+ .atag_offset = S3C2410_SDRAM_PA + 0x100,
+ .map_io = w5300e01_map_io,
+ .init_irq = s3c24xx_init_irq,
+ .init_machine = w5300e01_init,
+ .timer = &s3c24xx_timer,
+MACHINE_END
--
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/