Re: [PATCH] Intel xhci: Only switch the switchable ports

From: Keng-Yu Lin
Date: Tue Aug 14 2012 - 03:14:44 EST


Hi Sarah:
This is the dmesg with CONFIG_USB_XHCI_HCD_DEBUGGING=y from a laptop
with the issue.
I hope the log helps the analysis.

cheers,
-kengyu

On Fri, Aug 10, 2012 at 3:38 AM, Sarah Sharp
<sarah.a.sharp@xxxxxxxxxxxxxxx> wrote:
> On Fri, Aug 10, 2012 at 12:13:19AM +0800, Keng-Yu Lin wrote:
>> On Thu, Aug 9, 2012 at 10:24 PM, Sarah Sharp
>> <sarah.a.sharp@xxxxxxxxxxxxxxx> wrote:
>> > On Thu, Aug 09, 2012 at 05:31:51PM +0800, Keng-Yu Lin wrote:
>> >> With a previous patch to enable the EHCI/XHCI port switching, it switches
>> >> all the available ports.
>> >>
>> >> The assumption is not correct because the BIOS may expect some ports
>> >> not switchable by the OS.
>> >
>> > Why would the BIOS expect some ports to not be switchable? I know that
>> > we internally at Intel had discussed some theoretical reasons why it
>> > might not be good to switch some ports, but when I presented the
>> > original patch with this same code in it to Linux USB mailing list, both
>> > Alan and Greg said, "Why not unconditionally switch ports?" I had no
>> > good examples at the time.
>> >
>> > Is this causing issues with some particular BIOS?
>> >
>>
>> Yes, this is causing the internal webcam missing on the USB bus as I
>> observed on some HM70-based laptops.
>
> Does anything show up in dmesg when you turn on
> CONFIG_USB_XHCI_HCD_DEBUGGING? It would be good to know if it is
> totally not electrically present, or if there's some sort of xHCI
> hardware or software issue that's preventing the webcam from being
> enumerated.
>
>> The internal webcam is attached to one port that is controlled by the
>> xhci host.
>> But the other ports with the outer plugs work well after booting. I
>> cannot test the USB port of the internal webcam easily (without
>> tearing down the laptop :-/).
>>
>> I also tried some similar HM77-based models. HM77 has no this issue.
>> This could be some chipset mystery I am not aware now.
>
> Could be. Can you use any SMBIOS information to change the port
> switchover only for those HM70-based laptops? And is it a particular
> laptop vendor or all HM70 laptops?
>
> As Alan said, I would rather not trust the BIOS to provide the correct
> port mask.
>
> Sarah Sharp

Attachment: dmesg.xhcidebug
Description: Binary data

Attachment: dmesg.xhcidebug.3.5
Description: Binary data