Re: [PATCH 3/3]: ezusb cleanup, FX2 support, firmware downloadingsupport

From: René Bürgel
Date: Fri Aug 03 2012 - 11:16:07 EST


This patch adds new functions to upload firmware to the controller. The drivers currently using ezusb are adapted to use these new functions.

This also fixes a bug occuring during firmware loading in the whiteheat-driver:
The driver iterates over an ihex-formatted firmware using ++ on a "const struct ihex_binrec*" which leads to faulty results, because ihex data is read as length. The function "ihex_next_binrec(record)" has so be used to work correctly

Signed-off-by: René Bürgel <rene.buergel@xxxxxxxxx>
--
diff --git a/drivers/usb/serial/ezusb.c b/drivers/usb/serial/ezusb.c
index 351988d..867a3e1 100644
--- a/drivers/usb/serial/ezusb.c
+++ b/drivers/usb/serial/ezusb.c
@@ -13,6 +13,8 @@
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/usb.h>
+#include <linux/firmware.h>
+#include <linux/ihex.h>

struct ezusb_fx_type {
/* EZ-USB Control and Status Register. Bit 0 controls 8051 reset */
@@ -82,3 +84,80 @@ int ezusb_fx2_set_reset(struct usb_device *dev, unsigned char reset_bit)
return ezusb_set_reset(dev, ezusb_fx2.cpucs_reg, reset_bit);
}
EXPORT_SYMBOL_GPL(ezusb_fx2_set_reset);
+
+static int ezusb_ihex_firmware_download(struct usb_device *dev,
+ struct ezusb_fx_type fx,
+ const char *firmware_path)
+{
+ int ret = -ENOENT;
+ const struct firmware *firmware = NULL;
+ const struct ihex_binrec *record;
+
+ if (request_ihex_firmware(&firmware, firmware_path,
+ &dev->dev)) {
+ dev_err(&dev->dev,
+ "%s - request \"%s\" failed\n",
+ __func__, firmware_path);
+ goto out;
+ }
+
+ ret = ezusb_set_reset(dev, fx.cpucs_reg, 0);
+ if (ret < 0)
+ goto out;
+
+ record = (const struct ihex_binrec *)firmware->data;
+ for (; record; record = ihex_next_binrec(record)) {
+ if (be32_to_cpu(record->addr) > fx.max_internal_adress) {
+ ret = ezusb_writememory(dev, be32_to_cpu(record->addr),
+ (unsigned char *)record->data,
+ be16_to_cpu(record->len), WRITE_EXT_RAM);
+ if (ret < 0) {
+ dev_err(&dev->dev, "%s - ezusb_writememory "
+ "failed writing internal memory "
+ "(%d %04X %p %d)\n", __func__, ret,
+ be32_to_cpu(record->addr), record->data,
+ be16_to_cpu(record->len));
+ goto out;
+ }
+ }
+ }
+
+ ret = ezusb_set_reset(dev, fx.cpucs_reg, 1);
+ if (ret < 0)
+ goto out;
+ record = (const struct ihex_binrec *)firmware->data;
+ for (; record; record = ihex_next_binrec(record)) {
+ if (be32_to_cpu(record->addr) <= fx.max_internal_adress) {
+ ret = ezusb_writememory(dev, be32_to_cpu(record->addr),
+ (unsigned char *)record->data,
+ be16_to_cpu(record->len), WRITE_INT_RAM);
+ if (ret < 0) {
+ dev_err(&dev->dev, "%s - ezusb_writememory "
+ "failed writing external memory "
+ "(%d %04X %p %d)\n", __func__, ret,
+ be32_to_cpu(record->addr), record->data,
+ be16_to_cpu(record->len));
+ goto out;
+ }
+ }
+ }
+ ret = ezusb_set_reset(dev, fx.cpucs_reg, 0);
+out:
+ release_firmware(firmware);
+ return ret;
+}
+
+int ezusb_fx1_ihex_firmware_download(struct usb_device *dev,
+ const char *firmware_path)
+{
+ return ezusb_ihex_firmware_download(dev, ezusb_fx1, firmware_path);
+}
+EXPORT_SYMBOL_GPL(ezusb_fx1_ihex_firmware_download);
+
+int ezusb_fx2_ihex_firmware_download(struct usb_device *dev,
+ const char *firmware_path)
+{
+ return ezusb_ihex_firmware_download(dev, ezusb_fx2, firmware_path);
+}
+EXPORT_SYMBOL_GPL(ezusb_fx2_ihex_firmware_download);
+
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index 32bebde..523586d 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -38,8 +38,6 @@
#include <linux/tty_flip.h>
#include <linux/module.h>
#include <linux/spinlock.h>
-#include <linux/firmware.h>
-#include <linux/ihex.h>
#include <linux/uaccess.h>
#include <linux/usb.h>
#include <linux/usb/serial.h>
@@ -1163,10 +1161,7 @@ static void keyspan_close(struct usb_serial_port *port)
/* download the firmware to a pre-renumeration device */
static int keyspan_fake_startup(struct usb_serial *serial)
{
- int response;
- const struct ihex_binrec *record;
- char *fw_name;
- const struct firmware *fw;
+ char *fw_name;

dbg("Keyspan startup version %04x product %04x",
le16_to_cpu(serial->dev->descriptor.bcdDevice),
@@ -1234,34 +1229,16 @@ static int keyspan_fake_startup(struct usb_serial *serial)
return 1;
}

- if (request_ihex_firmware(&fw, fw_name, &serial->dev->dev)) {
- dev_err(&serial->dev->dev, "Required keyspan firmware image (%s) unavailable.\n", fw_name);
- return 1;
- }
-
dbg("Uploading Keyspan %s firmware.", fw_name);

- /* download the firmware image */
- response = ezusb_fx1_set_reset(serial->dev, 1);
-
- record = (const struct ihex_binrec *)fw->data;
-
- while (record) {
- response = ezusb_writememory(serial->dev, be32_to_cpu(record->addr),
- (unsigned char *)record->data,
- be16_to_cpu(record->len), 0xa0);
- if (response < 0) {
- dev_err(&serial->dev->dev, "ezusb_writememory failed for Keyspan firmware (%d %04X %p %d)\n",
- response, be32_to_cpu(record->addr),
- record->data, be16_to_cpu(record->len));
- break;
- }
- record = ihex_next_binrec(record);
+ if (ezusb_fx1_ihex_firmware_download(serial->dev, fw_name) < 0) {
+ dev_err(&serial->dev->dev, "failed to load firmware \"%s\"\n",
+ fw_name);
+ return -ENOENT;
}
- release_firmware(fw);
- /* bring device out of reset. Renumeration will occur in a
- moment and the new device will bind to the real driver */
- response = ezusb_fx1_set_reset(serial->dev, 0);
+
+ /* after downloading firmware Renumeration will occur in a
+ moment and the new device will bind to the real driver */

/* we don't want this device to have a driver assigned to it. */
return 1;
diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c
index 87c5812..bf0bb37 100644
--- a/drivers/usb/serial/keyspan_pda.c
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -25,8 +25,6 @@
#include <linux/module.h>
#include <linux/spinlock.h>
#include <linux/workqueue.h>
-#include <linux/firmware.h>
-#include <linux/ihex.h>
#include <linux/uaccess.h>
#include <linux/usb.h>
#include <linux/usb/serial.h>
@@ -679,8 +677,6 @@ static int keyspan_pda_fake_startup(struct usb_serial *serial)
{
int response;
const char *fw_name;
- const struct ihex_binrec *record;
- const struct firmware *fw;

/* download the firmware here ... */
response = ezusb_fx1_set_reset(serial->dev, 1);
@@ -700,30 +696,15 @@ static int keyspan_pda_fake_startup(struct usb_serial *serial)
__func__);
return -ENODEV;
}
- if (request_ihex_firmware(&fw, fw_name, &serial->dev->dev)) {
+
+ if (ezusb_fx1_ihex_firmware_download(serial->dev, fw_name) < 0) {
dev_err(&serial->dev->dev, "failed to load firmware \"%s\"\n",
fw_name);
return -ENOENT;
}
- record = (const struct ihex_binrec *)fw->data;
-
- while (record) {
- response = ezusb_writememory(serial->dev, be32_to_cpu(record->addr),
- (unsigned char *)record->data,
- be16_to_cpu(record->len), 0xa0);
- if (response < 0) {
- dev_err(&serial->dev->dev, "ezusb_writememory failed "
- "for Keyspan PDA firmware (%d %04X %p %d)\n",
- response, be32_to_cpu(record->addr),
- record->data, be16_to_cpu(record->len));
- break;
- }
- record = ihex_next_binrec(record);
- }
- release_firmware(fw);
- /* bring device out of reset. Renumeration will occur in a moment
- and the new device will bind to the real driver */
- response = ezusb_fx1_set_reset(serial->dev, 0);
+
+ /* after downloading firmware Renumeration will occur in a
+ moment and the new device will bind to the real driver */

/* we want this device to fail to have a driver assigned to it. */
return 1;
diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
index b34665c..a9ad0c5 100644
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -33,8 +33,6 @@
#include <linux/serial.h>
#include <linux/usb/serial.h>
#include <linux/usb/ezusb.h>
-#include <linux/firmware.h>
-#include <linux/ihex.h>
#include "whiteheat.h" /* WhiteHEAT specific commands */

static bool debug;
@@ -196,84 +194,15 @@ static int firm_report_tx_done(struct usb_serial_port *port);
static int whiteheat_firmware_download(struct usb_serial *serial,
const struct usb_device_id *id)
{
- int response, ret = -ENOENT;
- const struct firmware *loader_fw = NULL, *firmware_fw = NULL;
- const struct ihex_binrec *record;
+ int response;

- if (request_ihex_firmware(&firmware_fw, "whiteheat.fw",
- &serial->dev->dev)) {
- dev_err(&serial->dev->dev,
- "%s - request \"whiteheat.fw\" failed\n", __func__);
- goto out;
- }
- if (request_ihex_firmware(&loader_fw, "whiteheat_loader.fw",
- &serial->dev->dev)) {
- dev_err(&serial->dev->dev,
- "%s - request \"whiteheat_loader.fw\" failed\n",
- __func__);
- goto out;
- }
- ret = 0;
- response = ezusb_fx1_set_reset(serial->dev, 1);
-
- record = (const struct ihex_binrec *)loader_fw->data;
- while (record) {
- response = ezusb_writememory(serial->dev, be32_to_cpu(record->addr),
- (unsigned char *)record->data,
- be16_to_cpu(record->len), 0xa0);
- if (response < 0) {
- dev_err(&serial->dev->dev, "%s - ezusb_writememory "
- "failed for loader (%d %04X %p %d)\n",
- __func__, response, be32_to_cpu(record->addr),
- record->data, be16_to_cpu(record->len));
- break;
- }
- record = ihex_next_binrec(record);
- }
-
- response = ezusb_fx1_set_reset(serial->dev, 0);
-
- record = (const struct ihex_binrec *)firmware_fw->data;
- while (record && be32_to_cpu(record->addr) < 0x1b40)
- record = ihex_next_binrec(record);
- while (record) {
- response = ezusb_writememory(serial->dev, be32_to_cpu(record->addr),
- (unsigned char *)record->data,
- be16_to_cpu(record->len), 0xa3);
- if (response < 0) {
- dev_err(&serial->dev->dev, "%s - ezusb_writememory "
- "failed for first firmware step "
- "(%d %04X %p %d)\n", __func__, response,
- be32_to_cpu(record->addr), record->data,
- be16_to_cpu(record->len));
- break;
- }
- ++record;
- }
-
- response = ezusb_fx1_set_reset(serial->dev, 1);
-
- record = (const struct ihex_binrec *)firmware_fw->data;
- while (record && be32_to_cpu(record->addr) < 0x1b40) {
- response = ezusb_writememory(serial->dev, be32_to_cpu(record->addr),
- (unsigned char *)record->data,
- be16_to_cpu(record->len), 0xa0);
- if (response < 0) {
- dev_err(&serial->dev->dev, "%s - ezusb_writememory "
- "failed for second firmware step "
- "(%d %04X %p %d)\n", __func__, response,
- be32_to_cpu(record->addr), record->data,
- be16_to_cpu(record->len));
- break;
- }
- ++record;
+ response = ezusb_fx1_ihex_firmware_download(serial->dev, "whiteheat_loader.fw");
+ if (response >= 0) {
+ response = ezusb_fx1_ihex_firmware_download(serial->dev, "whiteheat.fw");
+ if (response >= 0)
+ return 0;
}
- ret = 0;
- response = ezusb_fx1_set_reset(serial->dev, 0);
- out:
- release_firmware(loader_fw);
- release_firmware(firmware_fw);
- return ret;
+ return -ENOENT;
}
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/