Re: [PATCH] gpio: samsung: Fix off-by-one bug in gpio addresses

From: Thomas Abraham
Date: Mon Jul 30 2012 - 04:37:26 EST


On 30 July 2012 13:34, ëìì <sangsu4u.park@xxxxxxxxxxx> wrote:
>
>
>> -----Original Message-----
>> From: dianders@xxxxxxxxxx [mailto:dianders@xxxxxxxxxx] On Behalf Of Doug Anderson
>> Sent: Saturday, July 21, 2012 6:07 AM
>> To: Sean Paul
>> Cc: grant.likely@xxxxxxxxxxxx; linus.walleij@xxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx;
>> olofj@xxxxxxxxxxxx; Sangsu Park; Thomas Abraham; Kukjin Kim
>> Subject: Re: [PATCH] gpio: samsung: Fix off-by-one bug in gpio addresses
>>
>> Acked-by: Doug Anderson <dianders@xxxxxxxxxxxx>
>>
>> ---
>>
>> On Fri, Jul 20, 2012 at 1:58 PM, Sean Paul <seanpaul@xxxxxxxxxxxx> wrote:
>> >
>> > Move gpc4 to the end of the automatically processed gpio controllers
>> > so we don't taint the automatic offset calculation.
>> >
>> > This bug caused all controllers coming after gpc4 to map to the
>> > incorrect address. The result is <&gpd1 0 0 0 0> would actually map to
>> > GPIO 0 in gpd0.
>> >
>> > Signed-off-by: Sean Paul <seanpaul@xxxxxxxxxxxx>
>> > ---
>> > drivers/gpio/gpio-samsung.c | 14 +++++++-------
>> > 1 files changed, 7 insertions(+), 7 deletions(-)
>> >
>> > diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c
>> > index b6453d0..e4599b4 100644
>> > --- a/drivers/gpio/gpio-samsung.c
>> > +++ b/drivers/gpio/gpio-samsung.c
>> > @@ -2454,12 +2454,6 @@ static struct samsung_gpio_chip exynos5_gpios_1[] = {
>> > },
>> > }, {
>> > .chip = {
>> > - .base = EXYNOS5_GPC4(0),
>> > - .ngpio = EXYNOS5_GPIO_C4_NR,
>> > - .label = "GPC4",
>> > - },
>> > - }, {
>> > - .chip = {
>> > .base = EXYNOS5_GPD0(0),
>> > .ngpio = EXYNOS5_GPIO_D0_NR,
>> > .label = "GPD0", @@ -2513,6 +2507,12 @@
>> > static struct samsung_gpio_chip exynos5_gpios_1[] = {
>> > .label = "GPY6",
>> > },
>> > }, {
>> > + .chip = {
>> > + .base = EXYNOS5_GPC4(0),
>> > + .ngpio = EXYNOS5_GPIO_C4_NR,
>> > + .label = "GPC4",
>> > + },
>> > + }, {
>> > .config = &samsung_gpio_cfgs[9],
>> > .irq_base = IRQ_EINT(0),
>> > .chip = {
>> > @@ -2833,7 +2833,7 @@ static __init void exynos5_gpiolib_init(void)
>> > }
>> >
>> > /* need to set base address for gpc4 */
>> > - exynos5_gpios_1[11].base = gpio_base1 + 0x2E0;
>> > + exynos5_gpios_1[20].base = gpio_base1 + 0x2E0;
>> >
>> > /* need to set base address for gpx */
>> > chip = &exynos5_gpios_1[21];
>> > --
>> > 1.7.7.3
>> >
>
> I think that this modification is right.
> Thanks.

Reviewed-by: Thomas Abraham <thomas.abraham@xxxxxxxxxx>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/